D. Luo

发表

Effect of the Periodic Distributions of Carbon Nanotube on Homogenized Effective Stiffness for Nanotube Reinforced Polymer Composites

D. Luo, Hong Yang, Yinglong Zhou, 2011 .

Microstructures, mechanical and corrosion properties and biocompatibility of as extruded Mg-Mn-Zn-Nd alloys for biomedical applications.

Yunfei Ding, Yuncang Li, D. Luo, 2015, Materials science & engineering. C, Materials for biological applications.

The application of a homogenized overall and local anisotropic damage constitutive model to unidirectional and cross-ply CFCC with oblique loading directions

H. Minamoto, D. Luo, S. Takezono, 2005 .

Detection of Trace Formaldehyde Gas Based on Quartz Crystal Microbalance Sensor in Living Environment

D. Luo, Z. Cao, Zhe Wang, 2011 .

An Analytical Model of Stress-Transfer in the Nano-Composites with Debonding Interface

D. Luo, W. Zhu, Yinglong Zhou, 2010 .

Electrochemical Determination of Nitrite Based on Gd Doped Nano Titanium Dioxide-Modified Gold Electrode

Chunye Xu, D. Luo, Z. Cao, 2011 .

Sensing Analysis of Aluminum Alloy Materials Based on Chemical Acoustic Emission Signals

J. Zeng, D. Luo, Z. Cao, 2010 .

Influence of extrusion on the microstructure, mechanical properties and in vitro corrosion performance of biodegradable Mg-1Mn-2Zn-1Nd alloy

Yunfei Ding, Yuncang Li, D. Luo, 2016 .

Failure analysis of the damaged rubber concrete under the secondary load

D. Luo, Yinglong Zhou, Yuan Xie, 2020 .

Geometric Modeling of Human Eyes Based on OCT Image of Anterior Segment and Its Application

D. Luo, 2022, Academic Journal of Science and Technology.

Corrosion behavior of Ti–Mo alloys cold rolled and heat treated

D. Luo, Yinglong Zhou, 2011 .

Experimental and numerical analysis of the constitutive equation of rubber composites reinforced with random ceramic particle

D. Luo, Y. Zhou, X. Su, 2018 .

MULTI-SCALE NUMERICAL SIMULATION OF THE THERMAL-MECHANICAL PROPERTIES FOR CERAMIC COMPOSITES REINFORCED WITH NANO-FIBER

D. Luo, Yinglong Zhou, R. Song, 2015 .

Microstructures, mechanical properties and in vitro corrosion behaviour of biodegradable Mg–Zr–Ca alloys

C. Wen, Yuncang Li, P. Hodgson, 2013, Journal of Materials Science.

Microstructural characterization and mechanical properties of Mg-Zr-Ca alloys prepared by hot-extrusion for biomedical applications

Peter Hodgson, Yuncang Li, Cuie Wen, 2011 .

Microstructures and Various Properties of Hot-Extruded Mg-Zr-Ca Alloys for Biomedical Applications

C. Wen, D. Luo, P. Hodgson, 2012 .

Effects of Nd on the Microstructures, Mechanical Properties and in Vitro Corrosion Behavior of Cast Mg-1Mn-2Zn-xNd Alloys

Yuncang Li, D. Luo, Yinglong Zhou, 2015 .

Microstructures and mechanical properties of as cast Mg–Zr–Ca alloys for biomedical applications

C. Wen, Yuncang Li, D. Luo, 2012 .

Microstructure, Mechanical and Thermal Properties of Mg-0.5Ca-xZr Alloys

D. Luo, Yinglong Zhou, Jie Liu, 2022, Crystals.

Evaluation of the Effect of Nd Content and Extrusion Process on Thermal Conductivity of Mg-Mn-Zn-Nd Alloys

D. Luo, Jie Liu, Yinglong Zhou, 2018, Crystals.

MICROSTRUCTURES AND MECHANICAL PROPERTIES OF AS-CAST Mg-Zr-Ca ALLOYS FOR BIOMEDICAL APPLICATIONS

C. Wen, Yuncang Li, D. Luo, 2011 .

Compressive Properties of Hot-Rolled Mg-Zr-Ca Alloys for Biomedical Applications

C. Wen, D. Luo, P. Hodgson, 2011 .

Coupling Influence between Recycled Ceramics and Grazed Hollow Beads on Mechanical Properties and Thermal Conductivity of Recycled Thermal Insulation Concrete

D. Luo, Ben Li, Yingjuan Yu, 2021, Materials.

Microstructures and mechanical properties of Ti–Mo alloys cold-rolled and heat treated

D. Luo, Yinglong Zhou, 2011 .

New solution method for homogenization analysis and its application to the prediction of macroscopic elastic constants of materials with periodic microstructures

Y. Takao, D. Luo, K. Kakimoto, 2006 .

A Closed-Form Solution of Effective Young's Modulus for Composites Including Multi-Shape Inclusions Using Improved Mori-Tanaka Model

D. Luo, Hong Yang, Wen Xue Wang, 2013 .

Comparison of the Models to Predict the Effective Young's Modulus of Hybrid Composites Reinforced with Multi-Shape Inclusions

D. Luo, Hong Yang, Yinglong Zhou, 2013 .

Effective Mechanical Properties for Composites with Three-Phase Randomly Distributed Aggregates Predicted by Multi-Step Mori-Tanaka Method

D. Luo, Hong Yang, Yinglong Zhou, 2012 .

Effects of the distribution and geometry of carbon nanotubes on the macroscopic stiffness and microscopic stresses of nanocomposites

Y. Takao, D. Luo, Wen-Xue Wang, 2007 .

Application of homogenization method on the evaluation and analysis of the effective stiffness for noncontinuous carbon nanotube/polymer composites

Y. Takao, D. Luo, Wen-Xue Wang, 2007 .

The Numerical Prediction of Effective Properties of Non-Continuous Carbon Nano-Reinforced Composites by the Macro-Microscopic Homogenization Method

Y. Takao, D. Luo, K. Kakimoto, 2006 .

Prediction of the Stiffness and Stresses for Carbon Nano-Tube Composites Based on Homogenization Analysis

Y. Takao, D. Luo, K. Kakimoto, 2005 .

Tetra-(N-Phenylpyrazole)-Porphyrin/β-Cyclodextrin Incorporated CNT Film Modified Hemoglobin Sensor

D. Luo, Z. Cao, Jinglin He, 2011 .

Analysis of plastic strain and stress concentration factor for carbon nano-tube composites with debonding interfaces with a cohesive zone model

Wenjie Zhu, D. Luo, Y. Zhou, 2015 .

Two-Scale Analysis for the Mechanical Properties of Nano-Composites with Non-Linear Interface

D. Luo, Hong Yang, Yinglong Zhou, 2010 .

Homogenization Analysis of Effective Mechanical Properties of Nano-Composites with Non-Linear Material Components

D. Luo, Yinglong Zhou, 2010 .

Fabrication of Piezoelectric Thickness-Shear-Mode Acoustic Wave Sensing Device and its Application

D. Luo, Z. Cao, Y. Dai, 2010 .

Molecule counting with alkanethiol and DNA immobilized on gold microplates for extended gate FET.

D. Luo, Zhongliang Xiao, Z. Cao, 2013, Materials science & engineering. C, Materials for biological applications.

ANALYSES OF INFLUENCE FACTORS ON MECHANICAL PROPERTIES OF CERAMIC COMPOSITES REINFORCED BY NANO-MICRO PARTICLES

D. Luo, Hong Yang, Yinglong Zhou, 2009 .

The Mechanical Behavior Analysis of CFCC with Overall Anisotropic Damage by the Micro-Macro Scale Method

H. Minamoto, D. Luo, S. Takezono, 2003 .

The Macro-Microscopic Numerical Simulation of the Mechanical Behavior of CFCC with Matrix Anisotropic Damage by Homogenization Method

H. Minamoto, D. Luo, S. Takezono, 2004 .

Study on the Performance and Solidification Mechanism of Multi-Source Solid-Waste-Based Soft Soil Solidification Materials

D. Luo, Benan Shu, Guodong Zeng, 2023, Materials.