J. Jain

发表

Homogenization Based Damage Models for Monotonic and Cyclic Loading in 3D Composite Materials

J. Jain, 2009 .

Damage Evolution in Composites with a Homogenization-based Continuum Damage Mechanics Model

Somnath Ghosh, J. Jain, 2009 .

Downhole Measurement and Monitoring Lead to an Enhanced Understanding of Drilling Vibrations and Polycrystalline Diamond Compact Bit Damage

L. W. Ledgerwood, Leroy W. Ledgerwood, Reed W. Spencer, 2013 .

Mitigation of Torsional Stick-Slip Vibrations in Oil Well Drilling through PDC Bit Design: Putting Theories to the Test

L. W. Ledgerwood, Leroy W. Ledgerwood, Danielle M. Fuselier, 2011 .

A homogenisation-based continuum damage mechanics model for cyclic damage in 3D composites

J. Jain, S. Ghosh, S. Ghosh, 2009, The Aeronautical Journal (1968).

Homogenization based continuum damage mechanics model for monotonic and cyclic damage evolution in 3D composites

Somnath Ghosh, J. Jain, 2008 .

Jet Impingement Melting With Vaporization: A Numerical Study

J. Jain, J. Ardenkjær-Larsen, A. Leach, 2008 .

Homogenization Based 3D Continuum Damage Mechanics Model for Composites Undergoing Microstructural Debonding

Somnath Ghosh, J. Jain, 2008 .

Mitigating Drilling Dysfunctions and Enhancing Performance with Self-Adjusting Bit Technology: Analytical and Experimental Case Studies

L. W. Ledgerwood, Leroy W. Ledgerwood, Anthony Phillips, 2017 .

A Step Change in Drill-Bit Technology With Self-Adjusting Polycrystalline-Diamond-Compact Bits

Volker Peters, Chaitanya K. Vempati, Reed W. Spencer, 2016 .

Derivation and experimental validation of an analytical criterion for the identification of self-excited modes in drilling systems

Georg-Peter Ostermeyer, Andreas Hohl, Hanno Reckmann, 2015 .

High-Frequency Torsional Dynamics of Drilling Systems: An Analysis of the Bit-System Interaction

Georg-Peter Ostermeyer, L. W. Ledgerwood, Leroy W. Ledgerwood, 2014 .

New Insights Into Drilling Dynamics Through High-Frequency Vibration Measurement and Modeling

L. W. Ledgerwood, Leroy W. Ledgerwood, Rolf Pessier, 2013 .

Model based online diagnosis of unbalance and transverse fatigue crack in rotor systems

T. K. Kundra, J. R Jain, J. Jain, 2004 .

Influence of layer thickness on the printability of nickel alloy 718:A systematic process optimization framework

A. Elwany, R. Arróyave, I. Karaman, 2023, Additive Manufacturing.

Numerical studies on channel formation and growth during solidification: Effect of process parameters

Arvind Kumar, J. Jain, P. Dutta, 2007 .

A STUDY OF ENERGY CONSERVATION WITH NANOTECHNOLOGY

J. Jain, U. Gupta, Abhishek Chaurvedi, 2017 .