K. Hellström

发表

Cyclic Corrosion and Chlorination of an FeCrAl Alloy in the Presence of KCl

N. Israelsson, K. Unocic, K. Hellström, 2015, Oxidation of Metals.

A Microstructural and Kinetic Investigation of the KCl-Induced Corrosion of an FeCrAl Alloy at 600 °C

M. Norell, N. Israelsson, K. Unocic, 2015, Oxidation of Metals.

KCl-Induced Corrosion of an FeCrAl Alloy at 600 °C in O2 + H2O Environment: The Effect of Pre-oxidation

N. Israelsson, K. Hellström, J. Svensson, 2015, Oxidation of Metals.

Uncovering the local inelastic interactions during manufacture of ductile cast iron: How the substructure of the graphite particles can induce residual stress concentrations in the matrix

J. Hattel, J. Thorborg, M. R. Sonne, 2018 .

Mitigation of Fireside Corrosion in Power Plants: The Combined Effect of Sulfur Dioxide and Potassium Chloride on the Corrosion of a FeCrAl Alloy

Yu Cao, M. Norell, K. Hellström, 2014 .

Density variations during solidification of lamellar graphite iron

K. Hellström, 2017 .

A broad literature review of density measurements of liquid cast iron

K. Hellström, A. Diószegi, L. Diaconu, 2017 .

Microstructural Investigation of the Initial Oxidation of the FeCrAlRE Alloy Kanthal AF in Dry and Wet O2 at 600 and 800 ° C

M. Olsson, K. Hellström, J. Svensson, 2010 .

Oxidation behavior of a Mo (Si, Al)2-based composite at 300–1000 °C

K. Hellström, J. Svensson, L. Johansson, 2010 .

Oxidation of a Dispersion-Strengthened Powder Metallurgical FeCrAl Alloy in the Presence of O2 at 1,100 °C: The Influence of Water Vapour

N. Israelsson, K. Hellström, J. Svensson, 2015, Oxidation of Metals.

First Three-Dimensional Atomic Resolution Investigation of Thermally Grown Oxide on a FeCrAl Alloy

K. Hellström, J. Svensson, L. Johansson, 2015, Oxidation of Metals.

The Oxide Scales Formed on a Dispersion-Strengthened Powder Metallurgical FeCrAl Alloy at 900 °C in O2 and in O2 + H2O

N. Israelsson, K. Hellström, J. Svensson, 2015, Oxidation of Metals.

Alumina Scale Formation on a Powder Metallurgical FeCrAl Alloy (Kanthal APMT) at 900–1,100 °C in Dry O2 and in O2 + H2O

M. Olsson, K. Hellström, J. Svensson, 2010 .

KCl-Induced Corrosion of the FeCrAl Alloy Kanthal® AF at 600 °C and the Effect of H2O

N. Israelsson, K. Hellström, J. Svensson, 2015, Oxidation of Metals.

Oxidation behavior at 300–1000 °C of a (Mo,W)Si2-based composite containing boride

K. Hellström, J. Svensson, L. Johansson, 2010 .

Oxidation behavior of a Mo(Si,Al)2 composite at 900–1600 °C in dry air

K. Hellström, J. Svensson, L. Johansson, 2013, Journal of Materials Science.

Oxidation behavior of a Mo (Si, Al)(2)-based composite at 300-1000 degrees C

K. Hellström, J. Svensson, L. Johansson, 2010 .

Corrosion behavior of a Mo(Si, Al)2 composite at 1700°C in 95% N2 + 5% H2

E. Ström, K. Hellström, Yngve Ögren, 2019 .

Oxidation behaviour of a (Mo, W)Si2-based composite in dry and wet oxygen atmospheres in the temperature range 350–950 °C

K. Hellström, J. Svensson, M. Halvarsson, 2009 .

Oxidation behaviors and microstructural alterations of a Mo(Si,Al)2-based composite after heating at 1580 °C either in a furnace (ex-situ) or via alternating current (in-situ)

E. Ström, K. Hellström, P. Persson, 2015 .

Density and thermal expansion coefficients of liquid and austenite phase in lamellar cast iron

K. Hellström, V. Diaconu, A. Diószegi, 2020, China Foundry.

The elemental distribution in the oxide scale on a conventionally cast and a metallurgical ODS FeCrAl alloy characterized by ToF‐SIMS

K. Hellström, P. Malmberg, 2014 .

Density Variations during Solidification of Grey Cast Iron

K. Hellström, A. Diószegi, L. Diaconu, 2018, Materials Science Forum.

A Comparative Study of the Initial Corrosion of KCl and PbCl2 on a Low-Alloyed Steel

K. Hellström, J. Liske, T. Jonsson, 2017, Oxidation of Metals.