N. Belfiore

Nicola Pio Belfiore, Apollonia Matrisciano, N. Belfiore, 2010, 2010 9th International Conference on Information Technology Based Higher Education and Training (ITHET).

Dynamic Model of a Conjugate-Surface Flexure Hinge Considering Impacts between Cylinders

R. Sinatra, A. Cammarata, N. Belfiore, 2022, Micromachines.

A Comprehensive Survey on Microgrippers Design: Operational Strategy

Nicola Pio Belfiore, Matteo Verotti, Alden Dochshanov, 2017 .

Attitudes toward Sustainability and Green Economy Issues Related to Some Students Learning Their Characteristics: A Preliminary Study

Nicola Pio Belfiore, Andrea Micangeli, Francesca Farioli, 2014 .

A Cantilever-Based Piezoelectric MEMS for Arbitrary XY Path Generation

N. Belfiore, A. Rossi, F. Botta, 2022, Micromachines.

Active isotropic compliance in redundant manipulators

P. Masarati, M. Verotti, N. Belfiore, 2020, Multibody System Dynamics.

A genetic algorithm-based method for the mechanical characterization of biosamples using a MEMS microgripper: numerical simulations.

M Verotti, P Di Giamberardino, N P Belfiore, 2019, Journal of the mechanical behavior of biomedical materials.

Applications of computational intelligence to mechanical engineering

Imre J. Rudas, Nicola Pio Belfiore, I. Rudas, 2014, 2014 IEEE 15th International Symposium on Computational Intelligence and Informatics (CINTI).

Isotropic compliance in RRP planar manipulators

Nicola Pio Belfiore, Matteo Verotti, M. Verotti, 2014, 2014 23rd International Conference on Robotics in Alpe-Adria-Danube Region (RAAD).

Active Joint Stiffness Regulation to Achieve Isotropic Compliance in the Euclidean Space

Imre J. Rudas, Paolo Di Giamberardino, Nicola Pio Belfiore, 2012 .

Isotropy in any RR planar dyad under active joint stiffness regulation

Imre J. Rudas, Nicola Pio Belfiore, Matteo Verotti, 2010, 19th International Workshop on Robotics in Alpe-Adria-Danube Region (RAAD 2010).

A Feasibility Study of a Novel Piezo MEMS Tweezer for Soft Materials Characterization

Nicola Pio Belfiore, Fabio Botta, Andrea Rossi, 2019, Applied Sciences.

Development of Micro-Grippers for Tissue and Cell Manipulation with Direct Morphological Comparison

Marco Balucani, Alvise Bagolini, Enrico Sciubba, 2015, Micromachines.

Micromanipulation: A Challenge for Actuation

Nicola Pio Belfiore, N. Belfiore, 2018, Actuators.

New strategy for testing new high nitrogen bearing steel for offshore wind turbines

Walter Holweger, Toni Blass, Werner Trojahn, 2016 .

Kinematic Synthesis of a D-Drive MEMS Device through the Rigid-Body Replacement Method

Paolo Bosetti, Nicola Pio Belfiore, Matteo Verotti, 2018 .

Design, Fabrication, Testing and Simulation of a Rotary Double Comb Drives Actuated Microgripper

N. Belfiore, A. Bagolini, P. Bellutti, 2021, Micromachines.

An Approach to the Extreme Miniaturization of Rotary Comb Drives

Muhammad Hamidullah, Fabrizio Frezza, Matteo Verotti, 2018, Actuators.

Analytical Modeling of a New Compliant Microsystem for Atherectomy Operations

N. Belfiore, A. Rossi, F. Botta, 2022, Micromachines.

New MEMS Tweezers for the Viscoelastic Characterization of Soft Materials at the Microscale

Alvise Bagolini, Fabio Botta, Pierluigi Bellutti, 2017, Micromachines.

Functional Synthesis of a New Class of Micro Electro-Mechanical Systems

Nicola Pio Belfiore, N. Belfiore, 2014 .

Inverse kinetostatic analysis of compliant four-bar linkages

Nicola Pio Belfiore, Pasquale Simeone, N. Belfiore, 2013 .

Isotropic compliance in the Special Euclidean Group SE(3)

Marco Morandini, Pierangelo Masarati, Nicola Pio Belfiore, 2016 .

Active isotropic compliance in redundant manipulators

Marco Morandini, Pierangelo Masarati, Nicola Pio Belfiore, 2020 .

Engineering-Aided Inventive Surgery

Andrea Scorza, Nicola Pio Belfiore, Pietro Ursi, 2020, Applied Sciences.

On Crossley's contribution to the development of graph based algorithms for the analysis of mechanisms and gear trains

Ettore Pennestrì, Nicola Pio Belfiore, E. Pennestrì, 2015 .

Comparison of solution strategies for multibody dynamics equations

Ettore Pennestrì, Pier Paolo Valentini, Nicola Pio Belfiore, 2011 .

A novel method to fully suppress single and bi-modal excitations due to the support vibration by means of piezoelectric actuators

N. Belfiore, A. Rossi, F. Botta, 2021 .

An Interdisciplinary Approach to the Nanomanipulation of SiO2 Nanoparticles: Design, Fabrication and Feasibility

Nicola Pio Belfiore, Matteo Verotti, Alessio Buzzin, 2018, Applied Sciences.

The mutual influences between technology and society: a contribution from the mechanical engineering diploma Universitario of the University of Rome la Sapienza

Nicola Pio Belfiore, Marco Di Benedetto, Apollonia Matrisciano, 2000, University as a Bridge from Technology to Society. IEEE International Symposium on Technology and Society (Cat. No.00CH37043).

A Comprehensive Survey on Microgrippers Design: Mechanical Structure

Nicola Pio Belfiore, Matteo Verotti, Alden Dochshanov, 2017 .

Downsizing Effects on Micro and Nano Comb Drives

G. de Cesare, N. Belfiore, E. Giovine, 2022, Actuators.

NEW APPROACH TO MODEL THE MECHANICAL BEHAVIOR OF MULTIPLE FRICTION PENDULUM DEVICES

V. Bianco, N. Belfiore, G. Monti, 2016 .

An accelerated test stand to assess wear in offshore wind turbines rolling bearings

N. Belfiore, F. Botta, R. Pileggi, 2018 .

Analysis of a teaching and learning method supported by open source codes and web activities

Nicola Pio Belfiore, Apollonia Matrisciano, Vindice Deplano, 2012, 2012 International Conference on Information Technology Based Higher Education and Training (ITHET).

Micromanipulation: A Challenge for Actuation

N. Belfiore, 2018, Actuators.

A hybrid approach to the development of a multilayer neural network for wear and fatigue prediction in metal forming

A. Finzi, Nicola Pio Belfiore, F. Casadei, 2007 .

Toward Operations in a Surgical Scenario: Characterization of a Microgripper via Light Microscopy Approach

Andrea Scorza, Salvatore Andrea Sciuto, Nicola Pio Belfiore, 2019, Applied Sciences.

Performance Evaluation of a MEMS Compact Electrostatic Microgripper Equipped with Rotary Comb Drives and Curved Flexure Hinges

N. Belfiore, A. Scorza, G. Cesare, 2024, 2024 47th MIPRO ICT and Electronics Convention (MIPRO).

On the Dependency of the Electromechanical Response of Rotary MEMS/NEMS on Their Embedded Flexure Hinges’ Geometry

G. de Cesare, N. Belfiore, E. Giovine, 2023, Micromachines.

Direct Kinetostatic Analysis of a Gripper with Curved Flexures

R. Sinatra, A. Cammarata, N. Belfiore, 2022, Micromachines.

A preliminary study on the dynamic characterization of a MEMS microgripper for biomedical applications

Andrea Scorza, Salvatore Andrea Sciuto, Nicola Pio Belfiore, 2021, 2021 IEEE International Symposium on Medical Measurements and Applications (MeMeA).

Design and Validation of a Single-SOI-Wafer 4-DOF Crawling Microgripper

Alvise Bagolini, Nicola Pio Belfiore, Pierluigi Bellutti, 2019, Micromachines.

Mechanical Response of Four-Bar Linkage Microgrippers with Bidirectional Electrostatic Actuation

Alvise Bagolini, Fabio Botta, Nicola Pio Belfiore, 2018, Actuators.

Operational characterization of CSFH MEMS technology based hinges

Nicola Pio Belfiore, Marco Balucani, Rocco Crescenzi, 2018 .

Distributed Databases for the development of Mechanisms Topology

Nicola Pio Belfiore, N. Belfiore, 2000 .

A brief note on the concept of planarity for kinematic chains

Nicola Pio Belfiore, N. Belfiore, 2000 .

On the numerical computation of Generalized Burmester Points

Ettore Pennestrì, Nicola Pio Belfiore, E. Pennestrì, 1995 .