Aijun Hu

发表

Dynamic analysis and experiment investigation of a cracked dual-disc bearing-rotor system based on orbit morphological characteristics

Aijun Hu, Feng Ye, Ling Xiang, 2020 .

Multi-fault coupling study of a rotor system in experimental and numerical analyses

Ling Xiang, Aijun Hu, Zeqi Deng, 2019, Nonlinear Dynamics.

Dynamic analysis of a multi-disk rod fastening rotor system with rub-impact based on multiple parameters

Ling Xiang, Yue Zhang, Aijun Hu, 2022, Nonlinear Dynamics.

Nonlinear characteristic investigation of tribo-crack-dynamic rotor system based on full spectrum analysis

Ling Xiang, Yue Zhang, Aijun Hu, 2021 .

Harmonic wavelet packets method and its application to signal analysis of rotating machinery

Guiji Tang, Aijun Hu, Rongpei Zhang, 2009, 2009 International Conference on Image Analysis and Signal Processing.

Analysis of Fault Diagnosis for Rolling Bearing Based on EMD and Local Smoothness Index

Xue Wang, Yu Zhu, Ai Jun Hu, 2012 .

Frequency Loss and Recovery in Rolling Bearing Fault Detection

Ling Xiang, Aijun Hu, Shan Xu, 2019, Chinese Journal of Mechanical Engineering.

Bifurcation and chaos analysis for multi-freedom gear-bearing system with time-varying stiffness

Aijun Hu, Ling Xiang, Jia Yi, 2016 .

An optimal selection method for morphological filter’s parameters and its application in bearing fault diagnosis

Ling Xiang, Aijun Hu, Ling Xiang, 2016 .

Dynamic modeling and analysis of multistage planetary gear system considering tooth crack fault

Ling Xiang, Yue Zhang, Aijun Hu, 2022, Engineering Failure Analysis.

Failure dynamic modelling and analysis of planetary gearbox considering gear tooth spalling

Aijun Hu, Ling Xiang, Chaohui An, 2021, Engineering Failure Analysis.

Dynamic analysis of a planetary gear system with multiple nonlinear parameters

Nan Gao, Aijun Hu, Ling Xiang, 2018, J. Comput. Appl. Math..

Dynamical Analysis of Planetary Gear Transmission System Under Support Stiffness Effects

Aijun Hu, Ling Xiang, Zeqi Deng, 2020, Int. J. Bifurc. Chaos.

Nonlinear Dynamic Characteristics of Wind Turbine Gear System Caused by Tooth Crack Fault

Aijun Hu, Ling Xiang, Chaohui An, 2021, Int. J. Bifurc. Chaos.

Forecasting Short-Term Wind Speed Based on IEWT-LSSVM Model Optimized by Bird Swarm Algorithm

Aijun Hu, Zeqi Deng, Ling Xiang, 2019, IEEE Access.

Nonlinear Dynamics of a Multistage Gear Transmission System with Multi-Clearance

Yue Zhang, Nan Gao, Aijun Hu, 2018, Int. J. Bifurc. Chaos.

Nonlinear dynamics of an asymmetric rotor-bearing system with coupling faults of crack and rub-impact under oil-film forces

Aijun Hu, Ling Xiang, Xueyuan Gao, 2016 .

Impact of Wind Power Penetration on Wind–Thermal-Bundled Transmission System

Ling Xiang, Yue Zhang, Aijun Hu, 2022, IEEE Transactions on Power Electronics.

Output-only modal analysis of wind turbine tower based on vibration response under emergency stop.

Ling Xiang, Aijun Hu, Jun Zhao, 2018, ISA transactions.

Deterministic and probabilistic multi-step forecasting for short-term wind speed based on secondary decomposition and a deep learning method

Yue Zhang, Aijun Hu, Ling Xiang, 2020 .

Experimental study on the intrawave frequency modulation characteristic of rotor rub and crack fault

Aijun Hu, Ling Xiang, Yue Zhang, 2019, Mechanical Systems and Signal Processing.

Crack characteristic analysis of multi-fault rotor system based on whirl orbits

Aijun Hu, Ling Xiang, Yue Zhang, 2019, Nonlinear Dynamics.

Fault detection of wind turbine based on SCADA data analysis using CNN and LSTM with attention mechanism

Aijun Hu, Ling Xiang, Penghe Wang, 2021 .

A novel method based on meta-learning for bearing fault diagnosis with small sample learning under different working conditions

Ling Xiang, Aijun Hu, Hao Su, 2022, Mechanical Systems and Signal Processing.

Fault diagnosis for the gearbox of wind turbine combining ensemble intrinsic time-scale decomposition with Wigner bi-spectrum entropy

Ling Xiang, Nan Gao, Aijun Hu, 2017 .

Ultra-short term wind power prediction applying a novel model named SATCN-LSTM

Ling Xiang, Aijun Hu, Hao Su, 2021, Energy Conversion and Management.

Nonlinear dynamics of an asymmetric rotor-bearing system with coupling faults of crack and rub-impact under oil-film forces

Ling Xiang, Aijun Hu, Xueyuan Gao, 2016, Nonlinear Dynamics.

Condition monitoring and anomaly detection of wind turbine based on cascaded and bidirectional deep learning networks

Aijun Hu, Ling Xiang, Hao Su, 2022, Applied Energy.

A new condition-monitoring method based on multi-variable correlation learning network for wind turbine fault detection

Aijun Hu, Xianze Li, Qingtao Yao, 2022, Measurement Science and Technology.

A novel hybrid method based on KELM with SAPSO for fault diagnosis of rolling bearing under variable operating conditions

Aijun Hu, Benfeng Gao, Ling Xiang, 2021 .

A novel method based on deep transfer unsupervised learning network for bearing fault diagnosis under variable working condition of unequal quantity

Ling Xiang, Aijun Hu, Hao Su, 2022, Knowl. Based Syst..

Intelligent condition assessment of industry machinery using multiple type of signal from monitoring system

Ling Xiang, Aijun Hu, Jianfeng Lin, 2020 .

Analysis of Morphological Filter's Frequency Response Characteristics in Vibration Signal Processing

Aijun Hu, Aijun Hu, 2012 .

Frequency Loss and Recovery in Rolling Bearing Fault Detection

Ling Xiang, Aijun Hu, Sha Xu, 2019, Chinese Journal of Mechanical Engineering.

A novel hybrid approach for damage identification of wind turbine bearing under variable speed condition

Xiaolong Wang, Aijun Hu, Yuling He, 2022, Mechanism and Machine Theory.

A Novel Composed Method of Cleaning Anomy Data for Improving State Prediction of Wind Turbine

Ling Xiang, Aijun Hu, Hao Su, 2022, SSRN Electronic Journal.

Nonlinear coupled dynamics of an asymmetric double-disc rotor-bearing system under rub-impact and oil-film forces

Yeping Xiong, Jing Tang Xing, Aijun Hu, 2016 .

Nonlinear dynamic response on multi-fault rod fastening rotor with variable parameters

Ling Xiang, Yue Zhang, Aijun Hu, 2022, Applied Mathematical Modelling.

Dynamic analysis of composite rod fastening rotor system considering multiple parameter influence

Ling Xiang, Yue Zhang, Aijun Hu, 2022, Applied Mathematical Modelling.

Rotating machinery fault diagnosis based on impact feature extraction deep neural network

Ling Xiang, Aijun Hu, Yonggang Xu, 2022 .

Time-extracting S-transform algorithm and its application in rolling bearing fault diagnosis

Aijun Hu, Gang Yu, Yonggang Xu, 2022, Science China Technological Sciences.

A novel intelligent fault diagnosis method of rolling bearings with small samples

B. Liu, Aijun Hu, Yonggang Xu, 2022, Measurement.

Transformer-based meta learning method for bearing fault identification under multiple small sample conditions

Aijun Hu, Hao Su, Qingtao Yao, 2024, Mechanical Systems and Signal Processing.

A novel model for ultra-short term wind power prediction based on Vision Transformer

Aijun Hu, Qingtao Yao, Ling Xiang, 2024, Energy.

An engineering condition indicator for condition monitoring of wind turbine bearings

Aijun Hu, Ling Xiang, Lijia Zhu, 2019, Wind Energy.

Crack characteristic analysis of multi-fault rotor system based on whirl orbits

Ling Xiang, Yue Zhang, Aijun Hu, 2018, Nonlinear Dynamics.

Application of deep learning to fault diagnosis of rotating machineries

Aijun Hu, Hao Su, Ling Xiang, 2024, Measurement Science and Technology.

Dynamic simulation and experimental study of an asymmetric double-disk rotor-bearing system with rub-impact and oil-film instability

Aijun Hu, Ling Xiang, Lanlan Hou, 2015, Nonlinear Dynamics.