N. Cheung

发表

An Effective Inverse Heat Transfer Procedure Based on Evolutionary Algorithms to Determine Cooling Conditions of a Steel Continuous Casting Machine

Felipe Bertelli, Carlos H. Silva-Santos, Noé Cheung, 2015 .

Purification of naphthalene by zone refining: Mathematical modelling and optimization by swarm intelligence-based techniques

F. Bertelli, C. H. Silva-Santos, N. Cheung, 2020 .

Application of an Artificial Intelligence Technique to Improve Purification in the Zone Refining Process

N. Cheung, Amauri Garcia, T. Cheung, 2010 .

Application of a Genetic Algorithm to Optimize Purification in the Zone Refining Process

N. Cheung, Amauri Garcia, R. Caram, 2011 .

Zone Refining of Tin: Optimization of Zone Length by a Genetic Algorithm

N. Cheung, Amauri Garcia, T. Cheung, 2013 .

Microstructure features and mechanical/electrochemical behavior of directionally solidified Al−6wt.%Cu−5wt.%Ni alloy

Talita A. Vida, N. Cheung, Amauri Garcia, 2021, Transactions of Nonferrous Metals Society of China.

Morphology of Intermetallics Tailoring Tensile Properties and Quality Index of a Eutectic Al–Si–Ni Alloy

N. Cheung, Amauri Garcia, R. Kakitani, 2020, Advanced Engineering Materials.

Effects of solidification thermal parameters and Bi doping on silicon size, morphology and mechanical properties of Al-15wt.% Si-3.2wt.% Bi and Al-18wt.% Si-3.2wt.% Bi alloys

H. Henein, N. Cheung, Amauri Garcia, 2020 .

Interfacial heat transfer and microstructural analyses of a Bi- 5% Sb lead-free alloy solidified against Cu, Ni and low-C steel substrates

F. Bertelli, N. Cheung, Amauri Garcia, 2021 .

Assessment of Cooling Conditions of a Continuous Casting Machine for Steel Billets Based on Surface Temperature Measurements

N. Cheung, Amauri Garcia, L. L. Taconi, 2012 .

Interfacial heat transfer coefficients and solidification of an aluminum alloy in a rotary continuous caster

George S. Dulikravich, Noé Cheung, José Maria do Vale Quaresma, 2009 .

The Effects of Solidification Cooling and Growth Rates on Microstructure and Hardness of Supersaturated Al-7%Si-x%Zn Alloys

N. Cheung, Amauri Garcia, R. Kakitani, 2021, Journal of Materials Engineering and Performance.

The effects of a eutectic modifier on microstructure and surface corrosion behavior of Al-Si hypoeutectic alloys

N. Cheung, Amauri Garcia, J. Spinelli, 2007 .

Interface evaluation of a Bi–Zn eutectic solder alloy: Effects of different substrate materials on thermal contact conductance

Rudimylla S. Septimio, N. Cheung, Amauri Garcia, 2021 .

Sn-Mg lead-free solder alloy: Effect of solidification thermal parameters on microstructural features and microhardness

N. Cheung, Amauri Garcia, Thiago S Lima, 2019, Materials Research Express.

Length scale of the dendritic microstructure affecting tensile properties of Al-(Ag)-(Cu) alloys

N. Cheung, Amauri Garcia, Crystopher Brito, 2016 .

Cellular/dendritic arrays and intermetallic phases affecting corrosion and mechanical resistances of an Al-Mg-Si alloy

Talita A. Vida, N. Cheung, Amauri Garcia, 2016 .

Interconnection of Zn content, macrosegregation, dendritic growth, nature of intermetallics and hardness in directionally solidified Mg-Zn alloys

N. Cheung, Amauri Garcia, Crystopher Brito, 2016 .

Galvanic corrosion analysis of a Bi–Zn solder alloy coupled to Ni and Cu substrates

Rudimylla S. Septimio, M. Arenas, A. Conde, 2020 .

Experimental and numerical analyses of laser remelted Sn–0.7 wt%Cu solder surfaces

F. Bertelli, N. Cheung, Amauri Garcia, 2015, Journal of Materials Science: Materials in Electronics.

Dendritic Spacing and Macrosegregation Affecting Microhardness of an Al-Si-Mg Alloy Solidified Under Unsteady State Conditions

N. Cheung, Amauri Garcia, Crystopher Brito, 2019, Materials Research.

The effect of the growth rate on microsegregation: Experimental investigation in hypoeutectic Al–Fe and Al–Cu alloys directionally solidified

F. Bertelli, N. Cheung, Amauri Garcia, 2013 .

Two-Phase Dendrite and Bimodal Structure in an Al-Cu-Ni Alloy: Their Roles in Hardness

N. Cheung, Amauri Garcia, Adilson V. Rodrigues, 2022, Journal of Materials Engineering and Performance.

Effect of Microstructure Features on the Corrosion Behavior of the Sn-2.1 wt%Mg Solder Alloy

N. Cheung, Amauri Garcia, Thiago S Lima, 2020, Electronic Materials Letters.

Microstructure characterization of a directionally solidified Mg-12wt.%Zn alloy: Equiaxed dendrites, eutectic mixture and type/morphology of intermetallics

N. Cheung, Amauri Garcia, C. Afonso, 2018 .

Interplay of Wettability, Interfacial Reaction and Interfacial Thermal Conductance in Sn-0.7Cu Solder Alloy/Substrate Couples

N. Cheung, Amauri Garcia, J. Spinelli, 2019, Journal of Electronic Materials.

Solidification microstructure-dependent hydrogen generation behavior of Al–Sn and Al–Fe alloys in alkaline medium

N. Cheung, Amauri Garcia, Clarissa Cruz, 2021 .

Effects of Macrosegregation and Microstructure on the Corrosion Resistance and Hardness of a Directionally Solidified Zn-5.0wt.%Mg Alloy

Rudimylla S. Septimio, Talita A. Vida, N. Cheung, 2019, Materials Research.

The application of an analytical model to solve an inverse heat conduction problem: Transient solidification of a Sn-Sb peritectic solder alloy on distinct substrates

F. Bertelli, N. Cheung, Amauri Garcia, 2019 .

Microstructure, tensile properties and wear resistance correlations on directionally solidified Al-Sn-(Cu; Si) alloys

M. Arenas, A. Conde, J. Damborenea, 2017 .

Effect of Bi content on microstructure and corrosion behaviour of Zn–8Al–(Bi) alloys

Rudimylla S. Septimio, M. Arenas, A. Conde, 2021 .

Effects of cooling rate and microstructure scale on wear resistance of unidirectionally solidified Al-3.2wt.%Bi-(1; 3) wt.%Pb alloys

N. Cheung, Amauri Garcia, Thiago S Lima, 2020 .

Characterization of Dendritic Microstructure, Intermetallic Phases, and Hardness of Directionally Solidified Al-Mg and Al-Mg-Si Alloys

Talita A. Vida, F. Bertelli, N. Cheung, 2015, Metallurgical and Materials Transactions A.

Investigation of intermetallics in hypoeutectic Al–Fe alloys by dissolution of the Al matrix

N. Cheung, Amauri Garcia, J. Spinelli, 2009 .

Monotectic Al-Bi-Sn alloys directionally solidified: Effects of Bi content, growth rate and cooling rate on the microstructural evolution and hardness

N. Cheung, Amauri Garcia, T. Costa, 2015 .

Effects of Melt Superheating on the Microstructure and Tensile Properties of a Ternary Al-15 Wt Pct Si-1.5 Wt Pct Mg Alloy

N. Cheung, Amauri Garcia, R. Kakitani, 2019, Metallurgical and Materials Transactions A.

Dry Sliding Wear Features of an Al-20Sn-5Zn Alloy Affected by Microstructural Length Scales

N. Cheung, Amauri Garcia, Clarissa Cruz, 2022, Lubricants.

Measurement and interrelation of length scale of dendritic microstructures, tensile properties, and machinability of Al-9 wt% Si-(1 wt% Bi) alloys

N. Cheung, Amauri Garcia, T. Costa, 2019, The International Journal of Advanced Manufacturing Technology.

Near-eutectic Zn-Mg alloys: Interrelations of solidification thermal parameters, microstructure length scale and tensile/corrosion properties

Talita A. Vida, N. Cheung, Amauri Garcia, 2019, Current Applied Physics.

Correlation between microstructure and corrosion behaviour of Bi-Zn solder alloys

Rudimylla S. Septimio, M. Arenas, A. Conde, 2019, Corrosion Engineering, Science and Technology.

Cooling thermal parameters, microstructure, segregation and hardness in directionally solidified Al–Sn-(Si;Cu) alloys

H. Nguyen-Thi, G. Reinhart, F. Bertelli, 2015 .

The effects of cell spacing and distribution of intermetallic fibers on the mechanical properties of hypoeutectic Al-Fe alloys

N. Cheung, Amauri Garcia, J. Spinelli, 2010 .

Microstructural and hardness investigation of an aluminum–copper alloy processed by laser surface melting

Noé Cheung, N. Cheung, Amauri Garcia, 2003 .

Influence of refining time on nonmetallic inclusions in a low-carbon, silicon-killed steel

N. Cheung, Amauri Garcia, J.C.S. Pires, 2003 .

Directionally solidified dilute Zn-Mg alloys: Correlation between microstructure and corrosion properties

Talita A. Vida, M. Arenas, A. Conde, 2017 .

Improvement of water resistance in magnesia cements with renewable source silica

A. Peruzzi, N. Cheung, C. Gomes, 2020 .

The effects of Zn segregation and microstructure length scale on the corrosion behavior of a directionally solidified Mg-25 wt.%Zn alloy

N. Cheung, Amauri Garcia, W. R. Osório, 2017 .

Horizontally Solidified Al–3 wt%Cu–(0.5 wt%Mg) Alloys: Tailoring Thermal Parameters, Microstructure, Microhardness, and Corrosion Behavior

N. Cheung, Amauri Garcia, A. Moreira, 2018, Acta Metallurgica Sinica (English Letters).

Relationship between spacing of eutectic colonies and tensile properties of transient directionally solidified Al-Ni eutectic alloy

N. Cheung, Amauri Garcia, R. Kakitani, 2018 .

Cellular growth during transient directional solidification of hypoeutectic Al–Fe alloys

José E. Spinelli, Noé Cheung, N. Cheung, 2009 .

Thermal Parameters and Microstructural Development in Directionally Solidified Zn-Rich Zn-Mg Alloys

Talita A. Vida, M. Arenas, A. Conde, 2016, Metallurgical and Materials Transactions A.

Tailoring microstructure and microhardness of Zn−1wt.%Mg−(0.5wt.%Mn, 0.5wt.%Ca) alloys by solidification cooling rate

Talita A. Vida, N. Cheung, Amauri Garcia, 2021 .

Correlation between unsteady-state solidification thermal parameters and microstructural growth of Zn–8 mass% Al and Zn–8 mass% Al–XBi tribological alloys

Rudimylla S. Septimio, Talita A. Vida, N. Cheung, 2020, Journal of Thermal Analysis and Calorimetry.

High cooling rate cells, dendrites, microstructural spacings and microhardness in a directionally solidified Al-Mg-Si alloy

H. Nguyen-Thi, G. Reinhart, N. Cheung, 2015 .

Effect of cooling rate on microstructure and microhardness of hypereutectic Al–Ni alloy

N. Cheung, R. Kakitani, A. Carrara, 2021, Archives of Civil and Mechanical Engineering.

The Roles of Mn and Ni Additions to Fe-Contaminated Al in Neutralizing Fe and Stabilizing the Cellular α-Al Microstructure

N. Cheung, Amauri Garcia, R. Kakitani, 2019, Journal of Sustainable Metallurgy.

Directional solidification of a Sn-0.2Ni solder alloy in water-cooled copper and steel molds: Related effects on the matrix micromorphology, nature of intermetallics and tensile properties

N. Cheung, Amauri Garcia, R. Kakitani, 2017 .

The effect of solidification thermal variables on surface quality of Al–Cu ingots

N. Cheung, Amauri Garcia, J. Quaresma, 2007 .

Solidification thermal parameters affecting the columnar-to-equiaxed transition

N. Cheung, Amauri Garcia, Claudio Siqueira, 2002 .

Solder/substrate interfacial thermal conductance and wetting angles of Bi–Ag solder alloys

José E. Spinelli, Felipe Bertelli, Bismarck Luiz Silva, 2016, Journal of Materials Science: Materials in Electronics.

Thermal conductance at Sn-0.5mass%Al solder alloy/substrate interface as a factor for tailoring cellular/dendritic growth

F. Bertelli, N. Cheung, Amauri Garcia, 2021, Journal of Thermal Analysis and Calorimetry.

The correlation between dendritic microstructure and mechanical properties of directionally solidified hypoeutectic Al-Ni alloys

José E. Spinelli, Noé Cheung, N. Cheung, 2010 .

SEM Characterization of Al3Ni Intermetallics and its Influence on Mechanical Properties of Directionally Solidified Hypoeutectic Al-Ni Alloys

N. Cheung, Amauri Garcia, J. Spinelli, 2010 .

Microstructural Development in Al-Ni Alloys Directionally Solidified under Unsteady-State Conditions

N. Cheung, Amauri Garcia, I. Ferreira, 2008 .

Secondary dendrite arm spacing and solute redistribution effects on the corrosion resistance of Al–10 wt% Sn and Al–20 wt% Zn alloys

N. Cheung, Amauri Garcia, J. Spinelli, 2006 .

The correlation between thermal variables and secondary dendrite arm spacing during solidification of horizontal cylinders of Sn–Pb alloys

N. Cheung, Amauri Garcia, Eduardo Netto de Souza, 2005 .

Slow and rapid cooling of Al–Cu–Si ultrafine eutectic composites: Interplay of cooling rate and microstructure in mechanical properties

N. Cheung, C. Afonso, R. Kakitani, 2019, Journal of Materials Research.

Metal/mold thermal conductance affecting ultrafine scale microstructures in aluminum eutectic alloys

F. Bertelli, N. Cheung, Amauri Garcia, 2021 .

Microstructure, phase morphology, eutectic coupled zone and hardness of Al Co alloys

N. Cheung, Amauri Garcia, R. Kakitani, 2020 .

Microstructure and Tensile/Corrosion Properties Relationships of Directionally Solidified Al–Cu–Ni Alloys

Talita A. Vida, N. Cheung, Amauri Garcia, 2018, Metals and Materials International.

Interconnection of thermal parameters, microstructure and mechanical properties in directionally solidified Sn–Sb lead-free solder alloys

José E. Spinelli, Marcelino Dias, Thiago A. Costa, 2015 .

Cooling thermal parameters, microstructural spacing and mechanical properties in a directionally solidified hypereutectic Al–Si alloy

N. Cheung, Amauri Garcia, R. Kakitani, 2016 .

Corrosion Resistance and Mechanical Properties of an Al 9wt%Si Alloy Treated by Laser Surface Remelting

N. Cheung, Amauri Garcia, W. R. Osório, 2009 .

A comparative analysis of microstructural features, tensile properties and wettability of hypoperitectic and peritectic Sn-Sb solder alloys

José E. Spinelli, Amauri Garcia, Bismarck Luiz Silva, 2018, Microelectron. Reliab..

Laser remelting of Al–1.5 wt%Fe alloy surfaces: Numerical and experimental analyses

F. Bertelli, N. Cheung, Amauri Garcia, 2011 .

Steady and unsteady state peritectic solidification

N. Cheung, J. Spinelli, P. Goulart, 2015 .

An alternative thermal approach to evaluate the wettability of solder alloys

José E. Spinelli, Felipe Bertelli, Bismarck Luiz Silva, 2016 .

Microstructure and Tensile Strength of an Al-Si-Fe-V Alloy: Vanadium and Solidification Thermal Parameters as Recycling Strategies

N. Cheung, Amauri Garcia, R. Kakitani, 2022, Sustainability.

Electrochemical corrosion behaviour of Sn–Sb solder alloys: the roles of alloy Sb content and type of intermetallic compound

N. Cheung, Amauri Garcia, N. N. Regone, 2020 .

Inward solidification of cylinders: Reversal in the growth rate and microstructure evolution

F. Bertelli, N. Cheung, Amauri Garcia, 2013 .

Heat Transfer Characteristics of Inward, Outward and Upward Solidification of an Al-1.5wt%Fe Alloy in Cylindrical Chill Molds

Felipe Bertelli, Noé Cheung, F. Bertelli, 2012 .

Transient Unidirectional Solidification, Microstructure and Intermetallics in Sn-Ni Alloys

N. Cheung, Amauri Garcia, R. Kakitani, 2018 .

Cellular to dendritic transition during transient solidification of a eutectic Sn-0.7 wt%Cu solder alloy

José E. Spinelli, Noé Cheung, N. Cheung, 2012 .

Sn-0.5Cu(-x)Al Solder Alloys: Microstructure-Related Aspects and Tensile Properties Responses

N. Cheung, Thiago S Lima, J. Spinelli, 2019, Metals.

Plate-like growth in a eutectic Bi–Ni alloy: effects of morphological microstructure evolution and Bi3Ni intermetallic phase on tensile properties

N. Cheung, Amauri Garcia, Thiago S Lima, 2020 .

Microstructure Growth Morphologies, Macrosegregation, and Microhardness in Bi–Sb Thermal Interface Alloys

N. Cheung, Amauri Garcia, Thiago Soares, 2020, Advanced Engineering Materials.

Thermal Parameters, Microstructure, and Mechanical Properties of Directionally Solidified Sn-0.7 wt.%Cu Solder Alloys Containing 0 ppm to 1000 ppm Ni

José E. Spinelli, Bismarck Luiz Silva, Noé Cheung, 2012, Journal of Electronic Materials.

Microstructural Refinement and Improvement of Microhardness of a Hypoeutectic Al-Fe Alloy Treated by Laser Surface Remelting

N. Cheung, Amauri Garcia, R. Kakitani, 2020, Proceedings of 2nd Coatings and Interfaces Web Conference.

Cellular Microstructure and Mechanical Properties of a Directionally Solidified Al-1.0wt%Fe Alloy

F. Bertelli, N. Cheung, Amauri Garcia, 2010 .

Local solidification thermal parameters affecting the eutectic extent in Sn-Cu and Sn-Bi solder alloys

N. Cheung, Amauri Garcia, R. Kakitani, 2021, Soldering & Surface Mount Technology.

An Alternative to the Recycling of Fe-Contaminated Al

N. Cheung, Amauri Garcia, Thiago S Lima, 2018, Journal of Sustainable Metallurgy.

Evaluation of solder/substrate thermal conductance and wetting angle of Sn–0.7 wt%Cu–(0–0.1 wt%Ni) solder alloys

N. Cheung, Amauri Garcia, J. Spinelli, 2015 .

Tailoring Morphology and Size of Microstructure and Tensile Properties of Sn-5.5 wt.%Sb-1 wt.%(Cu,Ag) Solder Alloys

N. Cheung, Amauri Garcia, J. Spinelli, 2018, Journal of Electronic Materials.

Factors affecting solidification thermal variables along the cross-section of horizontal cylindrical ingots

Carlos Alexandre dos Santos, Noé Cheung, N. Cheung, 2005 .

Cellular-to-Dendritic and Dendritic-to-Cellular Morphological Transitions in a Ternary Al-Mg-Si Alloy

H. Nguyen-Thi, N. Cheung, J. Spinelli, 2019, IOP Conference Series: Materials Science and Engineering.

Thermal analysis during solidification of an Al–Cu eutectic alloy: interrelation of thermal parameters, microstructure and hardness

N. Cheung, Amauri Garcia, R. Kakitani, 2019, Journal of Thermal Analysis and Calorimetry.

The use of a directional solidification technique to investigate the interrelationship of thermal parameters, microstructure and microhardness of Bi-Ag solder alloys

José E. Spinelli, Bismarck Luiz Silva, Noé Cheung, 2014 .

Unsteady-State Directional Solidification of a Hypoperitectic Pb-9.5wt%Bi Alloy

N. Cheung, Amauri Garcia, P. Goulart, 2012 .

Analysis of extensive wetting angle vs. cooling rate data in Bi-, Zn- and Sn-based solder alloys

N. Cheung, Amauri Garcia, J. Spinelli, 2022, Microelectronics Reliability.

Sn-0.7 wt%Cu-(xNi) alloys: Microstructure-mechanical properties correlations with solder/substrate interfacial heat transfer coefficient

José E. Spinelli, Bismarck Luiz Silva, Noé Cheung, 2015 .

Microstructure and Mechanical Properties of Directionally Solidified Unmodified and Ni-Modified Sn-0.7wt%Cu Lead-Free Solder Alloy

N. Cheung, Amauri Garcia, J. Spinelli, 2013 .

On array models theoretical predictions versus measurements for the growth of cells and dendrites in the transient solidification of binary alloys

José E. Spinelli, Noé Cheung, N. Cheung, 2011 .

Corrigendum to “Cellular growth during transient directional solidification of hypoeutectic Al–Fe alloys” [J. Alloys Compd. 470 (2009) 589–599]

N. Cheung, Amauri Garcia, I. Ferreira, 2009 .

Melt characteristics and solidification growth direction with respect to gravity affecting the interfacial heat transfer coefficient of chill castings

Noé Cheung, José Maria do Vale Quaresma, N. Cheung, 2009 .

Inverse segregation during transient directional solidification of an Al–Sn alloy: Numerical and experimental analysis

N. Cheung, Amauri Garcia, I. Ferreira, 2009 .

Corrosion behavior of an Al–Sn–Zn alloy: Effects of solidification microstructure characteristics

N. Cheung, Amauri Garcia, Clarissa Cruz, 2021 .

Transient directional solidification of a eutectic Al–Si–Ni alloy: Macrostructure, microstructure, dendritic growth and hardness

N. Cheung, Amauri Garcia, Thiago S Lima, 2019, Materialia.

Transition from high cooling rate cells to dendrites in directionally solidified Al-Sn-(Pb) alloys

N. Cheung, Amauri Garcia, Ricardo Oliveira, 2020 .

An artificial immune system algorithm applied to the solution of an inverse problem in unsteady inward solidification

Amauri Garcia, Felipe Bertelli, Noé Cheung, 2018, Adv. Eng. Softw..

Numerical and experimental analysis of laser surface remelting of Al–15Cu alloy samples

N. Cheung, M. A. Pinto, M. Ierardi, 2005 .

Length scale of solidification microstructure tailoring corrosion resistance and microhardness in T6 heat treatment of an Al–Cu–Mg alloy

N. Cheung, Amauri Garcia, A. Moreira, 2020 .

Investigation of the chemical composition of nonmetallic inclusions utilizing ternary phase diagrams

Noé Cheung, N. Cheung, Amauri Garcia, 2002 .

Investigation of nonmetallic inclusions in continuously cast carbon steel by dissolution of the ferritic matrix

N. Cheung, Amauri Garcia, M. Fernandes, 2002 .

Assessing Microstructure Tensile Properties Relationships in Al-7Si-Mg Alloys via Multiple Regression

Talita A. Vida, N. Cheung, Amauri Garcia, 2022, Metals.

Multiple linear regression approach to predict tensile properties of Sn-Ag-Cu (SAC) alloys

N. Cheung, Amauri Garcia, J. Spinelli, 2021 .

Nature inspired algorithms for the solution of inverse heat transfer problems applied to distinct unsteady heat flux orientations in cylindrical castings

F. Bertelli, N. Cheung, Amauri Garcia, 2022, Journal of Intelligent Manufacturing.

Tailoring microstructure, tensile properties and fracture process via transient directional solidification of Zn-Sn alloys

N. Cheung, Amauri Garcia, J. Spinelli, 2018 .

Microstructural and segregation effects affecting the corrosion behavior of a high‐temperature Bi‐Ag solder alloy in dilute chloride solution

Rudimylla S. Septimio, N. Cheung, Amauri Garcia, 2021, Journal of Applied Electrochemistry.

Evaluation of thermophysical properties of Al–Sn–Si alloys based on computational thermodynamics and validation by numerical and experimental simulation of solidification

Felipe Bertelli, Noé Cheung, F. Bertelli, 2016 .

Experimental impurity segregation and numerical analysis based on variable solute distribution coefficients during multi-pass zone refining of aluminum

N. Cheung, Amauri Garcia, R. Bertazzoli, 2008 .

The columnar to equiaxed transition during solidification of Sn–Pb alloys

Noé Cheung, N. Cheung, Amauri Garcia, 2003 .

Mechanical Properties, Microstructural Features, and Correlations with Solidification Rates of Al–Cu–Si Ultrafine Eutectic Alloys

N. Cheung, Amauri Garcia, J. Spinelli, 2021, Advanced Engineering Materials.

Numerical and experimental analysis of rapidly solidified laser remelted Al 5wt pct Ni surfaces

N. Cheung, Amauri Garcia, J. Spinelli, 2010 .

Numerical and experimental modelling of two-dimensional unsteady heat transfer during inward solidification of square billets

F. Bertelli, N. Cheung, Amauri Garcia, 2016 .

Inward and outward solidification of cylindrical castings: The role of the metal/mold heat transfer coefficient

F. Bertelli, N. Cheung, Amauri Garcia, 2012 .

Hypereutectic Zn–Al Alloys: Microstructural Development under Unsteady-State Solidification Conditions, Eutectic Coupled Zone and Hardness

Rudimylla S. Septimio, N. Cheung, Amauri Garcia, 2022, Metals.

Effects of cobalt and solidification cooling rate on intermetallic phases and tensile properties of a -Cu, -Zn, -Fe containing Al-Si alloy

T. M. Souza, N. Cheung, Amauri Garcia, 2020 .

Interrelationship of thermal parameters, microstructure and microhardness of directionally solidified Bi-Zn solder alloys

Amauri Garcia, Thiago A. Costa, Noé Cheung, 2017, Microelectron. Reliab..

Tensile, wear, and corrosion behaviors of an in situ Al–Al3Ni metal matrix composite solidified under different cooling rates

N. Cheung, R. Kakitani, F. Mariani, 2023, Journal of Materials Science.

Tensile properties and related microstructural aspects of hypereutectic Al-Si alloys directionally solidified under different melt superheats and transient heat flow conditions

N. Cheung, Amauri Garcia, R. Kakitani, 2017 .

Experimental analysis of the columnar-to-equiaxed transition in directionally solidified Al–Ni and Al–Sn alloys

José E. Spinelli, Noé Cheung, N. Cheung, 2007 .

Effects of cobalt and solidification cooling rate on intermetallic phases and tensile properties of a -Cu, -Zn, -Fe containing Al-Si alloy

T. M. Souza, N. Cheung, Amauri Garcia, 2020, The International Journal of Advanced Manufacturing Technology.

Al–Fe hypoeutectic alloys directionally solidified under steady-state and unsteady-state conditions

N. Cheung, Amauri Garcia, J. Spinelli, 2010 .

Application of a heuristic search technique for the improvement of spray zones cooling conditions in continuously cast steel billets

J. A. Spim, Amauri Garcia, Noé Cheung, 2006 .

Design of mechanical properties of Al-alloys chill castings based on the metal/mold interfacial heat transfer coefficient

José E. Spinelli, Noé Cheung, José Maria do Vale Quaresma, 2012 .

Upward and downward unsteady-state directional solidification of a hypoeutectic Al-3wt.%Mg alloy

F. Bertelli, N. Cheung, Amauri Garcia, 2017 .

Modifications on solidification thermal parameters, microstructure and hardness induced by Cu additions to a hypereutectic Zn 8Al alloy

Rudimylla S. Septimio, N. Cheung, Amauri Garcia, 2021 .

Belt Rotation in Pipe Conveyors: Failure Mode Analysis and Overlap Stability Assessment

N. Cheung, E. Macêdo, Leonardo S. Santos, 2023, Sustainability.

Biodegradable Zn−1wt.%Mg(−0.5wt.%Mn) Alloys: Influence of Solidification Microstructure on Their Corrosion Behavior

Talita A. Vida, N. Cheung, Amauri Garcia, 2023, Surfaces.

Electrochemical Corrosion Behavior of as-cast Zn-rich Zn-Mg Alloys in a 0.06M NaCl Solution

Talita A. Vida, N. Cheung, Amauri Garcia, 2017 .

Numerical Simulation and Experimental Analysis of Laser Surface Remelting of AISI 304 Stainless Steel Samples

M. Larosa, N. Cheung, Amauri Garcia, 2010 .

Microstructural modification by laser surface remelting and its effect on the corrosion resistance of an Al–9 wt%Si casting alloy

N. Cheung, Amauri Garcia, J. Spinelli, 2008 .