C. Camcı

发表

Short-Duration Measurements and Numerical Simulation of Heat Transfer Along the Suction Side of a Film-Cooled Gas Turbine Blade

Tony Arts, Cengiz Camci, C. Camcı, 1985 .

An Experimental Convective Heat Transfer Investigation Around a Film-Cooled Gas Turbine Blade

C. Camcı, T. Arts, 1990 .

Axial Flow Fan Tip Leakage Flow Control Using Tip Platform

C. Camcı, A. Akturk, Turbomachinery Aero-Heat, 2010 .

Casing Convective Heat Transfer Coefficient and Reference Freestream Temperature Determination Near an Axial Flow Turbine Rotor

C. Camcı, B. Gumusel, 2011 .

Determination of Casing Convective Heat Transfer Coefficient and Reference Free-stream Temperature in the Tip Clearance Region of an Axial Flow Turbine

C. Camcı, Turbomachinery Aero-Heat, B. Gumusel, 2007 .

PROOF COPY 003104JTM

C. Camcı, B. Glezer, C. McLean, 2001 .

Forced Convection Heat Transfer Enhancement Using a Self-Oscillating Impinging Planar Jet

C. Camcı, F. Herr, 2002 .

Viscous flow and performance issues in a 6:1 supersonic mixed-flow compressor with a tandem diffuser

C. Camcı, Aravinth Sadagopan, 2019, Aerospace Science and Technology.

EXPERIMENTAL TURBINE AERO-HEAT TRANSFER STUDIES IN ROTATING RESEARCH FACILITIES

C. Camcı, 2009 .

Turbine Aero-Heat Transfer Studies in Rotating Research Facilities

C. Camcı, 2010 .

Flow around Helicopter Blade Tip Sections Using a 2 d Particle Image Velocimeter-Part I

H. Kahveci, C. Camcı, 2006 .

Elliptical Pin Fins as an Alternative to Circular Pin Fins for Gas Turbine Blade Cooling Applications: Part 2 — Wake Flow Field Measurements and Visualization Using Particle Image Velocimetry

C. Camcı, O. Uzol, 2001 .

A New Hue Capturing Technique for the Quantitative Interpretation of Liquid Crystal Images Used in Convective Heat Transfer Studies

S. A. Hippensteele, C. Camcı, Kui-soon Kim, 1991 .

Analysis and quantification of a solid-state laser Doppler anemometer

Cengiz Camci, Christopher McLean, C. Camcı, 1995 .

Evaluation of a Hue Capturing Based Transient Liquid Crystal Method for High-Resolution Mapping of Convective Heat Transfer on Curved Surfaces

S. A. Hippensteele, C. Camcı, P. Poinsatte, 1993 .

Turbulent Flow and Endwall Heat Transfer Analysis in a 90∘ Turning Duct and Comparisons with Measured Data: Part I: Influence of Reynolds Number and Streamline Curvature on Viscous Flow Development

C. Camcı, Kui-soon Kim, B. Wiedner, 2002 .

An Experimental Study of Passage-to-Passage Flow Interactions in a Single Stage Axial Flow Research Turbine Rotor

C. Camcı, Y. Kim, Veerandra C. Andichamy, 2019, Volume 2B: Turbomachinery.

An Experimental Study of Using Vortex Generators As Tip Leakage Flow Interrupters in an Axial Flow Turbine Stage

C. Camcı, Veerandra C. Andichamy, Gohar T. Khokhar, 2018, Volume 2B: Turbomachinery.

THERMOGRAPHY AND A BRIEF REVIEW OF PAST STUDIES

C. Camcı, 2008 .

LIQUID CRYSTAL BASED TEMPERATURE AND HEAT TRANSFER MEASUREMENTS USING A TRANSIENT METHOD TEST CASE : IMPINGING ROUND JET

C. Camcı, 2008 .

LIQUID CRYSTAL BASED TEMPERATURE AND TRANSIENT HEAT TRANSFER MEASUREMENTS ON HIGHLY CURVED SURFACES TEST CASE : CURVED BOTTOM SURFACE OF A SQUARE TO RECTANGULAR TRANSITION DUCT

C. Camcı, 2008 .

INJECTION FROM A TIP TRENCH AS A TURBINE TIP DESENSITIZATION METHOD Part 2 : Leakage flow sensitivity to injection location

Nikhil M. Rao, C. Camcı, 2008 .

INJECTION FROM A TIP TRENCH AS A TURBINE TIP DESENSITIZATION METHOD Part 1 : Effect of injection mass flow rate

Nikhil M. Rao, C. Camcı, 2008 .

Influence of Casing Roughness on the Aerodynamic Structure of Tip Vortices in an Axial Flow Turbine

Nikhil M. Rao, C. Camcı, B. Gumusel, 2006 .

Axial Turbine Tip Desensitization by Injection From a Tip Trench: Part 2 — Leakage Flow Sensitivity to Injection Location

Nikhil M. Rao, C. Camcı, 2004 .

AXIAL TURBINE TIP DESENSITIZATION BY INJECTION FROM A TIP TRENCH PART 1: EFFECT OF INJECTION MASS FLOW RATE

Nikhil M. Rao, C. Camcı, 2004 .

OF SOLID OXIDIZER AND GASEOUS FUEL COMBUSTION PERFORMANCE USING AN ELEVATED PRESSURE COUNTERFLOW EXPERIMENT AND REVERSE HYBRID ROCKET ENGINE

R. Yetter, G. Lesieutre, C. Camcı, 2012 .

A Genetic Algorithm Based Multi-Objective Optimization of Squealer Tip Geometry in Axial Flow Turbines: A Constant Tip Gap Approach

Emre Alpman, Cengiz Camci, Levent Kavurmacioglu, 2020, Journal of Fluids Engineering.

The Pennsylvania State University

C. Camcı, A. Pritchett, D. K. Mclaughlin, 2016 .

An aerothermal study of the influence of squealer width and height near a HP turbine blade

Cengiz Camci, Levent Kavurmacioglu, Hidir Maral, 2018 .

Aerodynamic drag characteristics and shape design of a radar antenna used for airport ground traffic control

Cengiz Camci, Baris Gumusel, C. Camcı, 2010 .

PIV Measurements and Computational Study of a 5 -Inch Ducted Fan for V/STOL UAV Applications

Cengiz Camci, Ali Akturk, Akamol Shavalikul, 2009 .

LIP SEPARATION AND INLET FLOW DISTORTION CONTROL IN DUCTED FANS USED IN VTOL SYSTEMS

Cengiz Camci, Ali Akturk, C. Camcı, 2014 .

Flow around Helicopter Blade Tip Sections Using a ( 3 d ) Stereoscopic Particle Image Velocimeter-Part II

H. Kahveci, C. Camcı, 2006 .

A nonaxisymmetric endwall design approach and its computational assessment in the NGV of an HP turbine stage

Cengiz Camci, Özhan H. Turgut, C. Camcı, 2015 .

Determination of Optimal Row Spacing for a Staggered Cross-Pin Array in a Turbine Blade Cooling Passage

Cengiz Camci, Anil K. Kulkarni, A. D. Belegundu, 1998 .

Elliptical Pin Fins as an Alternative to Circular Pin Fins for Gas Turbine Blade Cooling Applications: Part 1 — Endwall Heat Transfer and Total Pressure Loss Characteristics

Oguz Uzol, Cengiz Camci, C. Camcı, 2001 .

A New Hue Capturing Technique for the Quantitative Interpretation of Liquid Crystal Images Used in Convective Heat Transfer Studies

Kuisoon Kim, Cengiz Camci, S. A. Hippensteele, 1991 .

Liquid crystal thermography

Cengiz Camci, C. Camcı, 1996 .

Heat Transfer, Pressure Loss and Flow Field Measurements Downstream of Staggered Two-Row Circular and Elliptical Pin Fin Arrays

Oguz Uzol, Cengiz Camci, C. Camcı, 2005 .

A design strategy for a 6:1 supersonic mixed-flow compressor stage

Aravinth Sadagopan, Cengiz Camci, C. Camcı, 2019, Aerospace Science and Technology.

A genetic algorithm based aerothermal optimization of tip carving for an axial turbine blade

Emre Alpman, Cengiz Camci, Levent Kavurmacioglu, 2019, International Journal of Heat and Mass Transfer.

Adiabatic Film Cooling Effectiveness From Heat Transfer Measurements in Compressible, Variable-Property Flow

Cengiz Camci, Phil Ligrani, C. Camcı, 1985 .

Turbulent Flow and Endwall Heat Transfer Analysis in a 908 Turning Duct and Comparisonswith Measured Data: Part II: Influence of Secondary Flow, Vorticity, Turbulent Kinetic Energy, and Thermal Boundary Conditions on Endwall Heat Transfer

C. Camcı, Kui-soon Kim, B. Wiedner, 2002 .

A Time Efficient Adaptive Gridding Approach and Improved Calibrations in Five-Hole Probe Measurements

Cengiz Camci, Jason Town, C. Camcı, 2015 .

Sub-Miniature Five-Hole Probe Calibration Using a Time Efficient Pitch and Yaw Mechanism and Accuracy Improvements

Cengiz Camci, Jason Town, C. Camcı, 2011 .

ENDWALL HEAT TRANSFER , TOTAL PRESSURE LOSS AND WAKE FLOW FIELD CHARACTERISTICS OF CIRCULAR AND ELLIPTICAL PIN FIN ARRAYS

C. Camcı, O. Uzol, 2003 .

Application of a Heat Flux/Calorimeter-Based Method to Assess the Effect of Turbulence on Turbine Airfoil Heat Transfer

Cengiz Camci, H. K. Moon, L. Zhang, 1994 .

Oscillator Fin as a Novel Heat Transfer Augmentation Device for Gas Turbine Cooling Applications

Oguz Uzol, Cengiz Camci, C. Camcı, 1998 .

Aerodynamics of Tip Leakage Flows Near Partial Squealer Rims in an Axial Flow Turbine Stage

Cengiz Camci, Levent Kavurmacioglu, Debashis Dey, 2005 .

Fluid Dynamics and Convective Heat Transfer in Impinging Jets Through Implementation of a High Resolution Liquid Crystal Technique. Part II: Navier-Stokes Computation of Impulsively Starting Heat Transfer Experiments

C. Camcı, K. Kim, 1995 .

Inlet Flow Separation Control via Novel Lip-Spoilers for Ducted Fan Based VTOL Uninhabited Aerial Vehicles

C. Camcı, A. Akturk, N. Herwig, 2016 .

Experimental and Computational Assessment of a Ducted-Fan Rotor Flow Model

Cengiz Camci, Ali Akturk, C. Camcı, 2012 .

Influence of Tip Clearance and Inlet Flow Distortion on Ducted Fan Performance in VTOL UAVs

Cengiz Camci, Ali Akturk, C. Camcı, 2010 .

A VTOL-UAV Inlet Flow Distortion Reduction Concept using a New Flow Control Approach : Double-Ducted-Fan ( DDF )

C. Camcı, A. Aktürk, 2017 .

A BRIEF DESCRIPTION OF THE DUCTED FAN INLET FLOW DISTORTION REDUCTION CONCEPT , DOUBLE-DUCTED-FAN ( DDF )

C. Camcı, A. Akturk, 2015 .

INLET FLOW DISTORTION AND LIP SEPARATION CONTROL IN DUCTED FANS Double Ducted Fan (DDF) as a Novel Lip Separation Control Concept

Cengiz Camci, Ali Akturk, C. Camcı, 2012 .

A COMPUTATIONAL AND EXPERIMENTAL ANALYSIS OF A DUCTED FAN USED IN VTOL UAV SYSTEMS

C. Camcı, A. Akturk, 2011 .

Experimental and Computational Investigation of a 5-inch Diameter Ducted Fan VTOL UAV in Hover and Forward Flight

C. Camcı, A. Akturk, 2011 .

Double Ducted Fan (DDF) as a Novel Ducted Fan Inlet Lip Separation Control Device

Cengiz Camci, Ali Akturk, C. Camcı, 2010 .