M. Bourke

R. O. Nelson, P. S. Bowling, M. Bourke, 1999, 1999 IEEE Conference on Real-Time Computer Applications in Nuclear Particle and Plasma Physics. 11th IEEE NPSS Real Time Conference. Conference Record (Cat. No.99EX295).

Structural mechanisms underlying near-zero thermal expansion in β-eucryptite: A combined synchrotron x-ray and neutron Rietveld analysis

M. Bourke, Hongwu Xu, P. Heaney, 1999 .

Load sharing in tungsten fiber reinforced Kanthal composites

B. Clausen, Donald W. Brown, M. Bourke, 2006 .

Investigation of Texture in ECAP Materials Using Neutron Diffraction

I. Beyerlein, C. Tomé, T. Langdon, 2003 .

Stress-induced martensitic transformations in NiTi and NiTi-TiC composites investigated by neutron diffraction

D. Dunand, M. Bourke, R. Vaidyanathan, 1998 .

The Role of Texture, Temperature and Strain Rate in the Activity of Deformation Twinning

S. P. Abeln, C. Tomé, Donald W. Brown, 2005 .

Finite element modeling of anisotropic properties of Cu-Ag metal matrix composites

M. Bourke, G. Garcia, H. Nakotte, 2000, IEEE Transactions on Applied Superconductivity.

In situ neutron diffraction and Elastic–Plastic Self-Consistent polycrystal modeling of HT-9

B. Clausen, D. Brown, M. Bourke, 2012 .

Asymmetric Lattice Response During Tensile and Compressive Deformation of a Uranium-Niobium Shape Memory Alloy

Dan Thoma, D. Brown, S. Vogel, 2004 .

Uniaxial tensile deformation of uranium 6 wt pct niobium: A neutron diffraction study of deformation twinning

Dan Thoma, D. Brown, R. Field, 2001 .

Experimental measurements and numerical simulation of stress and microstructure in carburized 5120 steel disks

M. Bourke, P. Rangaswamy, C. Scherer, 2001 .

Chapter 4 – Characterization of Residual Stresses in Composites

J. Goldstone, A. Needleman, M. Bourke, 1993 .

Analysis Of Neutron-Diffraction Peak Broadening Caused By Internal-Stresses In Composite-Materials

B. Derby, M. Bourke, R. Todd, 1995 .

Residual Strain Evolution during the Deformation of Single Fiber Metal Matrix Composites

J. Hanan, I. Beyerlein, B. Clausen, 2002 .

Thermal expansion anisotropy in a Ti–6Al–4V/SiC composite

J. M. Larsen, H. Choo, M. Bourke, 2002 .

In-Situ Response of WC-Ni Composites under Compressive Load

B. Clausen, D. Brown, M. Bourke, 2007 .

INVESTIGATION OF THE REDUCTION OF NiA1204

M. Bourke, B. Clausen, M. Lujan, 2001 .

INVESTIGATION OF THE REDUCTION OF NiA 1204

M. Bourke, 2001 .

Residual stresses in continuous-tungsten-fibre-reinforced Kanthal-matrix composites

I. Beyerlein, M. Bourke, M. Prime, 2003 .

00-5277 High Temperature Stress Assessment in SCS-6 / Ti-6 Al-4 V Composite using Neutron Diffraction and Finite Element Modeling

J. M. Larsen, H. Choo, M. Bourke, 2001 .

Comparison of residual strains measured by X-ray and neutron diffraction in a titanium (Ti-6Al-4V) matrix composite

Mark R. Daymond, Mark A.M. Bourke, Michael B. Prime, 1999 .

The influence of thermal-mechanical processing on residual stresses in titanium matrix composites

J. Roberts, P. Wright, M. Bourke, 1997 .

Assessment of the fiber/matrix interface bond strength in SiC/Ti-6Al-4V composites

M. Bourke, P. Rangaswamy, S. Krishnamurthy, 1999 .

A finite-element analysis of the inelastic relaxation of thermal residual stress in continuous-fiber-reinforced composites

Mark R. Daymond, Mark A.M. Bourke, Hahn Choo, 2001 .

Thermally and mechanically induced residual strains in Al-SiC composites

S. Nutt, J. Goldstone, A. Needleman, 1992 .

Measurement of residual thermal stress in WC–Co by neutron diffraction

B. Clausen, D. Mari, M. Bourke, 2009 .

Measured and predicted intergranular strains in textured austenitic steel

C. Tomé, M. Daymond, M. Bourke, 2000 .

The effect of low-temperature aging on the microstructure and deformation of uranium- 6 wt% niobium: An in-situ neutron diffraction study

Dan Thoma, A. Clarke, Donald W. Brown, 2016 .

SMARTS – a spectrometer for strain measurement in engineering materials

D. C. Dunand, D. Dunand, M. Bourke, 2002 .

Elastic modulus of shape-memory NiTi from in situ neutron diffraction during macroscopic loading, instrumented indentation, and extensometry

Mark A.M. Bourke, R. Vaidyanathan, M. Bourke, 2005 .

Compressive behavior of wire reinforced bulk metallic glass matrix composites

B. Clausen, M. Bourke, Seung-Yub Lee, 2005 .

High-temperature elastic properties of in situ-reinforced Si3N4

B. Clausen, M. Bourke, E. Üstündag, 2003 .

Elastic phase-strain distribution in a particulate-reinforced metal-matrix composite deforming by slip or creep

Mark R. Daymond, David C. Dunand, Mark A.M. Bourke, 1999 .

Texture formation during equal channel angular extrusion of fcc and bcc materials: comparison with simple shear

Mark A.M. Bourke, Saiyi Li, I. Beyerlein, 2005 .

Measurement of bulk residual stresses in molybdenum disilicide/stainless steel joints using neutron scattering

Mark A.M. Bourke, Darryl P. Butt, Rajendra U. Vaidya, 1998 .

Neutron diffraction measurements of residual stresses in alumina/SiC nanocomposites

R. Brook, M. Bourke, R. Todd, 1997 .

Finite element analysis of the plastic deformation zone and working load in equal channel angular extrusion

Mark A.M. Bourke, Saiyi Li, Bjørn Clausen, 2004 .

Heterogeneity of deformation texture in equal channel angular extrusion of copper

Mark A.M. Bourke, Saiyi Li, I. Beyerlein, 2004 .

Compressive deformation of in situ formed bulk metallic glass composites

Mark A.M. Bourke, Ersan Üstündag, Bjørn Clausen, 2006 .

Effect of thermal residual stress on the mechanical properties of NiAl-based composites

H. Choo, M. Bourke, P. Nash, 1998 .

Microstrain evolution during creep of a high volume fraction superalloy

M. Daymond, B. Majumdar, D. Brown, 2005 .

Complementary X-ray and neutron strain measurements of a carburized surface

T. M. Holden, Mark A.M. Bourke, M. Bourke, 1998 .

Residual Stress Measurement using the Pulsed Neutron Source at Lansce

J. Goldstone, M. Bourke, T. Holden, 1992 .

Residual Stress Distribution in Cracked Autofrettaged Tubing

P. J. Webster, M. Bourke, G. Webster, 1992 .

Measurement and modeling of room temperature co-deformation in WC-10 wt.% Co

Mark A.M. Bourke, Bjørn Clausen, B. Clausen, 2005 .

Neutron diffraction study of the deformation behavior of beryllium–aluminum composites

M. Bourke, D. H. Carter, 2000 .

Strain measurement by diffraction at LANSCE

J. Goldstone, M. Bourke, R. Robinson, 1994 .

A neutron diffraction and modeling study of uniaxial deformation in polycrystalline beryllium

D. Brown, R. Varma, M. Bourke, 2003 .

A study of twinning in zirconium using neutron diffraction and polycrystalline modeling

C. Tomé, R. Rogge, Donald W. Brown, 2002 .

Texture, strain, and phase-fraction measurements during mechanical cycling in superelastic NiTi

D. Dunand, M. Bourke, R. Vaidyanathan, 2001 .

Lattice strain evolution during uniaxial tensile loading of stainless steel

M. Daymond, B. Clausen, M. Bourke, 1999 .

Design and implementation of an x-ray strain measurement capability using a rotating anode machine

J. Roberts, M. Bourke, P. Rangaswamy, 1998 .

Internal strain measurement using pulsed neutron diffraction at LANSCE

J. Goldstone, M. Bourke, N. Shi, 1994 .

Measurement of strain in individual phases of composites before, during, and after mechanical loading

J. Goldstone, J. Allison, M. Bourke, 1993 .

Comparison Between Finite Element Calculations and Neutron Diffraction Measurements of Residual Stress in a Diametrically Compressed Ring

E. C. Flower, J. Goldstone, M. Bourke, 1992 .

Residual stress measurement in engineering components by neutron diffraction

M. Bourke, 1990 .

Effects of Elastic Anisotropy on the Lattice Strains in Polycrystalline Metals and Composites Measured by Neutron Diffraction

C. Windsor, W. David, A. Allen, 1989 .

In-Situ Neutron Diffraction Study of Strain-Induced Martensite Formation in 304L Stainless Steel at a Cryogenic Temperature

H. Choo, Donald W. Brown, S. Vogel, 2004 .

The analysis of internal strains measured by neutron diffraction in Al/SiC metal matrix composites

P. Withers, A. Allen, M. Bourke, 1992 .

Neutron diffraction studies on lattice strain evolution around a crack-tip during tensile loading and unloading cycles

B. Yang, P. Liaw, H. Choo, 2005 .

Neutron diffraction study of the deformation mechanisms of the uranium–7 wt.% niobium shape memory alloy

Dan Thoma, D. Brown, S. Vogel, 2006 .

In situ neutron diffraction studies on the elevated-temperature deformation behavior of a TiAl¿W alloy

H. Choo, Donald W. Brown, M. Bourke, 2004 .

Probing Mesoscopic Strain Evolution during Creep Deformation: An In-Situ Neutron Diffraction Study

H. Choo, Donald W. Brown, M. Bourke, 2004 .

COMPLEMENTARY NEUTRON DIFFRACTION AND COMPUTATIONAL MICROMECHANICS STUDIES OF POLYCRYSTALLINE DEFORMATION IN ADVANCED MATERIALS

C. Tomé, M. Bourke, 2001 .

Use of Rietveld refinement to fit a hexagonal crystal structure in the presence of elastic and plastic anisotropy

M. Daymond, M. Bourke, R. Dreele, 1999 .

Use of Rietveld refinement for elastic macrostrain determination and for evaluation of plastic strain history from diffraction spectra

Mark R. Daymond, Mark A.M. Bourke, T. Lorentzen, 1997 .

NiTi and NiTi-TiC composites: Part IV. Neutron diffraction study of twinning and shape-memory recovery

J. Roberts, D. Dunand, D. Mari, 1996 .

Measurement of Residual Stresses In Railway Rails

G. A. Webster, P. J. Webster, M. Bourke, 1989 .

Lattice plane response during tensile loading of an aluminum 2 percent magnesium alloy

B. Clausen, M. Bourke, 2001 .

In situ loading response of WC-Ni : Origins of toughness

Mark A.M. Bourke, D. W. Brown, Donald W. Brown, 2006 .

Temperature and direction dependence of internal strain and texture evolution during deformation of uranium

R. Mccabe, B. Clausen, D. Brown, 2009 .

Residual stress and microstructural characterization using Rietveld refinement of a carburized layer in a 5120 steel

A. C. Lawson, Mark A.M. Bourke, J. A. Goldstone, 1995 .

Strain measurement in individual phases of an Al/TiC composite during mechanical loading

J. Goldstone, J. Allison, M. Bourke, 1992 .

Residual stress and strain measurements in an austenitic steel plate containing a multipass weld

J. Goldstone, S. David, M. Bourke, 1992 .

Development of intergranular thermal residual stresses in beryllium during cooling from processing temperatures

S. P. Abeln, C. Tomé, B. Clausen, 2009 .

The Relation between Texture, Twinning and Mechanical Properties in Hexagonal Aggregates

C. Tomé, Donald W. Brown, M. Bourke, 2002 .

Phase-stress partition during uniaxial tensile loading of a TiC-particulate-reinforced Al composite

J. Roberts, J. Allison, M. Bourke, 1997 .

Measurement and prediction of strain in individual phases of a 2219Al/TiC/15p-T6 composite during loading

J. Goldstone, J. Allison, M. Bourke, 1993 .

Mechanically induced residual stresses in Al/SiC composites

S. Nutt, J. Goldstone, A. Needleman, 1991 .

Microstructure of cryogenic treated M2 tool steel

Mark A.M. Bourke, Jian Yu Huang, Irene J. Beyerlein, 2003 .

Inelastic neutron scattering and transmission electron microscope studies of lead dioxide

P. T. Moseley, C. J. Wright, P. Moseley, 1983 .

In-situ investigation of the reduction of NiO by a neutron transmission method

J. Hanan, S. Vogel, M. Bourke, 2002 .

Non-destructive studies of fuel pellets by neutron resonance absorption radiography and thermal neutron radiography

Mark A.M. Bourke, Anton S. Tremsin, Sven C. Vogel, 2013 .

Retransformation (α′→γ) kinetics of strain induced martensite in 304 stainless steel

J. G. Maldonado, Dan Thoma, S. Vogel, 2000 .

Real time measurement by Bragg edge diffraction of the reverse (α′ → γ) transformation in a deformed 304 stainless steel

J. G. Maldonado, M. Bourke, H. Priesmeyer, 1996 .

Phase transformations in engineering materials

Mark A. M. Bourke, David C. Dunand, Andrew C. Lawson, 1996, Other Conferences.

Non-contact measurement of partial gas pressure and distribution of elemental composition using energy-resolved neutron imaging

J. V. Vallerga, Adrian S. Losko, Anton S. Tremsin, 2017 .

Strain evolution after fiber failure in a single-fiber metal matrix composite under cyclic loading

J. Hanan, I. Beyerlein, B. Clausen, 2005 .

Influence of residual stresses on the evolution of micro-structure during the partial reduction of NiAl2O4

J. Roberts, Z. Zhang, M. Bourke, 1997 .

Phase fraction, texture and strain evolution in superelastic NiTi and NiTi–TiC composites investigated by neutron diffraction

David C. Dunand, Mark A.M. Bourke, R. Vaidyanathan, 1999 .

Residual stresses in a bulk metallic glass–stainless steel composite

J. Hanan, R. Winholtz, B. Clausen, 2005 .

Investigation of thermal residual stresses in tungsten-fiber/bulk metallic glass matrix composites

B. Clausen, M. Bourke, E. Üstündag, 2001 .

Internal Stresses in Bulk Metallic Glass Matrix Composites

D. Dunand, B. Clausen, Donald W. Brown, 2000 .

RESIDUAL STRESSES IN BULK METALLIC GLASSES DUE TO DIFFERENTIAL COOLING OR THERMAL TEMPERING

J. Hanan, B. Clausen, M. Bourke, 1998 .

Deformation of In-Situ-Reinforced Bulk Metallic Glass Matrix Composites

B. Clausen, Donald W. Brown, M. Bourke, 2002 .

Deconvoluting the influences of heat and plastic deformation on internal strains generated by friction stir processing

S. David, P. Liaw, W. Woo, 2005 .

Stress-induced martensitic transformations in NiTi and NiTi–TiC composites investigated by neutron diffraction

D. Dunand, M. Bourke, R. Vaidyanathan, 1999 .

ANALYSIS OF NEUTRON DIFFRACTION SPECTRA ACQUIRED IN SITU DURING STRESS-INDUCED TRANSFORMATIONS IN SUPERELASTIC NITI

David C. Dunand, Mark A.M. Bourke, R. Vaidyanathan, 1999 .

Real-time Crystal Growth Visualization and Quantification by Energy-Resolved Neutron Imaging

Mark A.M. Bourke, Adrian S. Losko, Anton S. Tremsin, 2017, Scientific Reports.

Non destructive examination of UN / U-Si fuel pellets using neutrons (preliminary assessment)

A. Tremsin, S. Vogel, M. Bourke, 2016 .

ELASTIC STRAIN EVOLUTION IN SINGLE-FIBER METAL MATRIX COMPOSITES UNDER TENSILE LOADING

J. Hanan, I. Beyerlein, B. Clausen, 2002 .

NON-DESTRUCTIVE IN-SITU REAL-TIME MEASUREMENTS OF STRUCTURAL PHASE TRANSITIONS USING NEUTRON TRANSMISSION

J. Hanan, S. Vogel, M. Bourke, 2001 .

Texture in Equal-Channel Angular Pressed Aluminum and Nickel

I. Beyerlein, C. Tomé, T. Langdon, 2002 .

Neutron diffraction investigation of hysteresis reduction and increase in linearity in the stress-strain response of superelastic NiTi

B. Clausen, M. Bourke, R. Vaidyanathan, 2006 .

Mechanical properties of NiTi-TiC shape-memory composites

J. Roberts, D. Dunand, D. Mari, 1996 .

Neutron diffraction measurement of stress-induced transformation in superelastic NiTi

David C. Dunand, Mark A.M. Bourke, R. Vaidyanathan, 1996 .

High‐Temperature Deformation of Silicon Nitride and its Composites

B. Clausen, M. Bourke, H. T. Lin, 2012 .

Effect of texture on hkl dependent intergranular strains measured in-situ at a pulsed neutron source

C. Tomé, M. Daymond, B. Clausen, 1997 .

In situ Neutron Diffraction Studies of Carbide-Matrix Interactions in HAYNES® 230® Nickel Based Superalloy

P. Liaw, R. Buchanan, H. Choo, 2004 .

Investigating shape-memory alloys and composites with neutron-diffraction techniques

D. Dunand, M. Bourke, R. Vaidyanathan, 2003 .

Internal strain evolution during heating of Ti-6Al-4V/SCS-6 composite

H. Choo, M. Bourke, P. Rangaswamy, 1999 .

Neutron diffraction studies of polycrystalline deformation in engineering materials

H. Choo, B. Clausen, D. Brown, 1999 .

Design, implementation, and testing of a cryogenic loading capability on an engineering neutron diffractometer.

B. Clausen, V. Livescu, D. Brown, 2010, The Review of scientific instruments.

Thermal residual stresses in NiAl–AlN–Al2O3 composites measured by neutron diffraction

Mark R. Daymond, Mark A.M. Bourke, Philip Nash, 1999 .

Advanced Postirradiation Characterization of Nuclear Fuels Using Pulsed Neutrons

M. Roth, A. Tremsin, S. Vogel, 2020, JOM.

Digital neutron and gamma-ray radiography in high radiation environments with an MCP/Timepix detector

A. Tremsin, M. Bourke, Glen C. Papaioannou, 2018, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment.

Qualitative comparison of bremsstrahlung X-rays and 800 MeV protons for tomography of urania fuel pellets.

F. Merrill, K. Kwiatkowski, J. Hunter, 2013, The Review of scientific instruments.

Texture and residual strain in two SiC/Ti-6-2-4-2 titanium composites

M. Daymond, M. Bourke, P. Rangaswamy, 2000 .

RESIDUAL STRESSES IN TUNGSTEN / BULK METALLIC GLASS COMPOSITES

M. Bourke, E. Üstündag, D. Dragoi, 2001 .

Evolution of Thermal Residual Stress in Intermetallic Matrix Composites During Heating

H. Choo, M. Daymond, M. Bourke, 2008 .