P. Partal

J. M. Franco, Pedro Partal, C. Gallegos, 2009, American journal of health-system pharmacy : AJHP : official journal of the American Society of Health-System Pharmacists.

Droplet-size distribution and stability of commercial injectable lipid emulsions containing fish oil.

J. M. Franco, C. Gallegos, P. Partal, 2012, American journal of health-system pharmacy : AJHP : official journal of the American Society of Health-System Pharmacists.

Reprint of: Education of chemical engineering in Spain: A global picture

G. Feijoo, P. Partal, R. Ibáñez, 2019, Education for Chemical Engineers.

Linear and nonlinear viscoelastic behavior of oil-in-water emulsions stabilized with polysaccharides

J. M. Franco, P. Partal, A. Califano, 2002 .

Influence of Bitumen Colloidal Nature on the Design of Isocyanate-Based Bituminous Products with Enhanced Rheological Properties

Antonio Páez, Moisés García-Morales, Pedro Partal, 2009 .

Influence of the prepolymer molecular weight and free isocyanate content on the rheology of polyurethane modified bitumens

P. Partal, M. García-Morales, V. Carrera, 2014 .

Effect of processing on the rheological properties of poly-urethane/urea bituminous products

C. Gallegos, P. Partal, M. García-Morales, 2010 .

Influence of Processing Temperature on the Modification Route and Rheological Properties of Thiourea Dioxide-Modified Bitumen

C. Gallegos, P. Partal, F. Navarro, 2011 .

Synergistic ethylcellulose/polyphosphoric acid modification of bitumen for paving applications

P. Partal, F. Navarro, A. Cuadri, 2020 .

- 1-Bitumen Chemical Modification by Thiourea Dioxide

P. Partal, F. Navarro, M. García-Morales, 2016 .

Novel Bitumen Chemical Rejuvenation by Using Dodecenyl Succinic Anhydride (DDSA)

P. Partal, M. García-Morales, 2015 .

End-performance evaluation of thiourea-modified bituminous binders through viscous flow and linear viscoelasticy testing

P. Partal, G. Airey, F. Navarro, 2013, Rheologica Acta.

BITUMEN CHEMICAL MODIFICATION BY THIOUREA : RHEOLOGICAL BEHAVIOUR AT LOW IN-SERVICE TEMPERATURES AND MICROSTRUCTURE

C. Gallegos, Morales, P. Partal, 2012 .

Enhancing the viscoelastic properties of bituminous binders via thiourea-modification

P. Partal, F. Navarro, M. García-Morales, 2012 .

Sustainable asphalt mixes manufactured with reclaimed asphalt and modified-lignin-stabilized bitumen emulsions

P. Partal, T. Gabet, M. García-Morales, 2018, Construction and Building Materials.

Characterization of sepiolite-gel-based formulations for controlled release of pesticides

P. Partal, J. Villaverde, C. Maqueda, 2009 .

Influence of pH and protei thermal treatment on the rheology of pea protein-stabilized oil-in-water emulsions

J. M. Franco, C. Gallegos, P. Partal, 2000 .

Linear viscoelastic behaviour of oil-in-water food emulsions stabilised by tuna-protein isolates

C. Gallegos, P. Partal, D. Ruiz-Márquez, 2013, Food science and technology international = Ciencia y tecnologia de los alimentos internacional.

Effect of pH and added electrolyte on the thermal-induced transitions of egg yolk

A. Guerrero, P. Partal, I. Martínez, 2004 .

Rheology and stability of bitumen/EVA blends

Antxon Santamaria, Moisés García-Morales, Pedro Partal, 2004 .

Formulation of new synthetic binders: Thermomechanical properties of resin/recycled polymer blends

F. Martínez-Boza, C. Gallegos, P. Partal, 2012 .

Oil-in-Oil emulsions of stearic acid dispersed in silicone oil with enhanced energy storage capability for heat transfer fluids

P. Partal, F. Navarro, C. Delgado-Sánchez, 2022, Solar Energy Materials and Solar Cells.

Modelling of pyrolysis and combustion of gluten-glycerol-based bioplastics.

P. Partal, I. Martínez, A. Barneto, 2011, Bioresource technology.

Rheology of Polymer Processing in Spain (1995–2020)

P. Partal, A. Santamaría, M. Fernández, 2021, Polymers.

Rheological characterization of polysaccharide-surfactant matrices for cosmetic O/W emulsions.

C. Gallegos, R. Lapasin, P. Partal, 2005, Journal of colloid and interface science.

Thermal, rheological and microstructural characterisation of commercial biodegradable polyesters

A. A. Cuadri, Moisés García-Morales, Pedro Partal, 2013 .

Bioplastics based on wheat gluten processed by extrusion

Alberto Romero, Pedro Partal, Antonio Guerrero, 2019 .

Rheology and Microstructural Transitions in the Lamellar Phase of a Cationic Surfactant

P. Partal, A. Kowalski, D. Machin, 2001 .

Rheology and microstructure of heat-induced egg yolk gels

A. Guerrero, P. Partal, F. Cordobés, 2004 .

Role of crystallinity on the thermal and viscous behaviour of polyethylene glycol-in-silicone oil (o/o) phase change emulsions

P. Partal, F. Navarro, C. Delgado-Sánchez, 2021 .

Rheological behaviour and physical properties of controlled-release gluten-based bioplastics.

C. Gallegos, P. Partal, I. Martínez, 2009, Bioresource technology.

Development of antimicrobial active packaging materials based on gluten proteins.

C. Gallegos, A. Guerrero, P. Partal, 2016, Journal of the science of food and agriculture.

Development of protein-based bioplastics with antimicrobial activity by thermo-mechanical processing

C. Gallegos, A. Guerrero, P. Partal, 2013 .

Effect of the lupin protein/surfactant ratio on linear viscoelastic properties of oil-in-water emulsions

J. M. Franco, C. Gallegos, P. Partal, 1999 .

Effect of pH and nanoclay content on the morphology and physicochemical properties of soy protein/montmorillonite nanocomposite obtained by extrusion

M. Félix, A. Romero, A. Guerrero, 2018 .

Linear and non-linear viscoelasticity of low-in-cholesterol mayonnaise / Viscoelasticidad lineal y no lineal de mayonesas con bajo contenido en colesterol

C. Gallegos, A. Guerrero, P. Partal, 2000 .

Effect of aldehydes on thermomechanical properties of gluten-based bioplastics

A. Romero, A. Guerrero, P. Partal, 2014 .

Egg white-based bioplastics developed by thermomechanical processing

C. Gallegos, A. Guerrero, P. Partal, 2007 .

Influence of concentration and temperature on the flow behavior of oil-in-water emulsions stabilized by sucrose palmitate

C. Gallegos, A. Guerrero, P. Partal, 1997 .

Development of highly-transparent protein/starch-based bioplastics.

C. Gallegos, P. Partal, J. Gonzalez-Gutierrez, 2010, Bioresource technology.

Rheology and processing of gluten based bioplastics

C. Gallegos, A. Guerrero, P. Partal, 2005 .

Influence of polymer melting point and Melt Flow Index on the performance of ethylene-vinyl-acetate modified bitumen for reduced-temperature application

P. Partal, M. García-Morales, A. Yuliestyan, 2016 .

Use of a MDI-functionalized reactive polymer for the manufacture of modified bitumen with enhanced properties for roofing applications

Moisés García-Morales, Pedro Partal, C. Gallegos, 2008 .

Bitumen modification with a low-molecular-weight reactive isocyanate-terminated polymer

Moisés García-Morales, Pedro Partal, F. Martínez-Boza, 2007 .

Effect of waste polymer addition on the rheology of modified bitumen

C. Gallegos, P. Partal, F. Navarro, 2006 .

Linear Viscoelasticity of Recycled EVA-Modified Bitumens

F. Martínez-Boza, C. Gallegos, P. Partal, 2004 .

Gluten-based bioplastics with modified controlled-release and hydrophilic properties

C. Gallegos, P. Partal, I. Martínez, 2013 .

Effect of processing on the viscoelastic, tensile and optical properties of albumen/starch-based bioplastics

C. Gallegos, P. Partal, J. Gonzalez-Gutierrez, 2011 .

Assessment of modified lignin cationic emulsifier for bitumen emulsions used in road paving

P. Partal, M. García-Morales, A. Yuliestyan, 2017 .

Selection of ethylene-vinyl-acetate properties for modified bitumen with enhanced end-performance

P. Partal, M. García-Morales, A. Yuliestyan, 2017, Rheologica Acta.

Novel recycled polyethylene/ground tire rubber/bitumen blends for use in roofing applications: Thermo-mechanical properties

F. Martínez-Boza, C. Gallegos, P. Partal, 2010 .

Evaluation of thermal and mechanical properties of recycled polyethylene modified bitumen

F. Martínez-Boza, C. Gallegos, P. Partal, 2008 .

Influence of Crumb Rubber Concentration on the Rheological Behavior of a Crumb Rubber Modified Bitumen

Pedro Partal, C. Gallegos, P. Partal, 2005 .

Effect of processing variables on the linear viscoelastic properties of SBS‐oil blends

F. Martínez-Boza, C. Gallegos, J. Areizaga, 2001 .

Protein-based bioplastics: effect of thermo-mechanical processing

Pedro Partal, Antonio Guerrero, C. Gallegos, 2007 .

Short- and Long-Term Epoxy Modification of Bitumen: Modification Kinetics, Rheological Properties, and Microstructure

P. Partal, F. Navarro, A. Cuadri, 2020, Polymers.

Ageing Effects on a Softened Bitumen by the Addition of DSA (Dodecenyl Succinic Anhydride)

P. Partal, Francisco J. Ortega, F. Navarro, 2022, Polymers.

Transient flow of o/w sucrose palmitate emulsions

C. Gallegos, A. Guerrero, P. Partal, 1999 .

Influence of Temperature and Composition on the Linear Viscoelastic Properties of Synthetic Binders

F. Martínez-Boza, C. Gallegos, P. Partal, 2000 .

RHEOLOGY OF FOOD DISPERSIONS

C. Gallegos, P. Partal, J. Franco, 2004 .

Linear and non-linear viscoelastic behavior of SBS and LDPE modified bituminous mastics

P. Partal, I. Liashenko, M. García-Morales, 2016 .

Rheological behaviour of polymer-modified bituminous mastics: A comparative analysis between physical and chemical modification

A. A. Cuadri, Moisés García-Morales, Pedro Partal, 2012 .

Viscous flow properties and phase behaviour of oil–resin blends

F. Martínez-Boza, C. Gallegos, P. Partal, 2005 .

Effect of composition and processing on the linear viscoelasticity of synthetic binders

Pedro Partal, F. Martínez-Boza, C. Gallegos, 2005 .

Steady-state flow behaviour of synthetic binders

F. Martínez-Boza, C. Gallegos, P. Partal, 2001 .

Influence of pressure and temperature on the flow behaviour of heavy fuel oils

F. Martínez-Boza, C. Gallegos, P. Partal, 2006 .

Influence of Processing on the Rheology of Egg Yolk Products

A. Guerrero, P. Partal, J. Miranda, 1998 .

Rheological characterization of egg yolk processed by spray-drying and lipid-cholesterol extraction with carbon dioxide

A. Guerrero, P. Partal, F. Cordobés, 2002 .

Non-bituminous binders formulated with bio-based and recycled materials for energy-efficient roofing applications

P. Partal, F. Navarro, A. Cuadri, 2023, Journal of Cleaner Production.

Thermomechanical and microstructural evaluation of hybrid rubberised bitumen containing a thermoplastic polymer

P. Partal, F. Navarro, V. Carrera, 2017 .

Formulation and processing of recycled-low-density-polyethylene-modified bitumen emulsions for reduced-temperature asphalt technologies

P. Partal, M. García-Morales, A. Cuadri, 2016 .

Formulation of new synthetic binders: Thermo-mechanical properties of recycled polymer/oil blends

F. Martínez-Boza, C. Gallegos, P. Partal, 2007 .

Wheat gluten-based materials plasticised with glycerol and water by thermoplastic mixing and thermomoulding.

A. Romero, A. Guerrero, P. Partal, 2011, Journal of the science of food and agriculture.

Viscous properties and microstructure of recycled eva modified bitumen

Moisés García-Morales, Pedro Partal, María Eugenia Muñoz, 2004 .

Effect of transesterification degree and post-treatment on the in-service performance of NCO-functionalized vegetable oil bituminous products

P. Partal, F. Navarro, M. García-Morales, 2014 .

Processing of bitumens modified by a bio-oil-derived polyurethane

A. A. Cuadri, Moisés García-Morales, Pedro Partal, 2014 .

The development of polyurethane modified bitumen emulsions for cold mix applications

A. A. Cuadri, P. Partal, V. Carrera, 2015 .

Chemically modified bitumens with enhanced rheology and adhesion properties to siliceous aggregates

Naveed Ahmad, James Grenfell, Gordon Airey, 2015 .

Isocyanate-functionalized castor oil as a novel bitumen modifier

A. A. Cuadri, Francisco J. Navarro, Moisés García-Morales, 2013 .

Novel bitumen/isocyanate-based reactive polymer formulations for the paving industry

Virginia Carrera, Pedro Partal, C. Gallegos, 2010 .

Effect of processing temperature on the bitumen/MDI-PEG reactivity

João C. Bordado, Moisés García-Morales, António Correia Diogo, 2009 .

Role of Water in the Development of New Isocyanate-Based Bituminous Products

Moisés García-Morales, Pedro Partal, C. Gallegos, 2008 .

Thermo-mechanical and hydrophilic properties of polysaccharide/gluten-based bioplastics.

A. Romero, A. Guerrero, P. Partal, 2014, Carbohydrate polymers.

Rheological characteristics of ground tire rubber-modified bitumens

F. Martínez-Boza, C. Gallegos, P. Partal, 2002 .

Process rheokinetics and microstructure of recycled EVA/LDPE-modified bitumen

F. Martínez-Boza, C. Gallegos, P. Partal, 2006 .

Use of plastic wastes from greenhouse in asphalt mixes manufactured by dry process

J. E. Martín-Alfonso, P. Partal, A. Cuadri, 2019, Road Materials and Pavement Design.

Synergistic ethylcellulose/polyphosphoric acid modification of bitumen for paving applications

P. Partal, F. Navarro, A. Cuadri, 2020, Materials Structure.

Bitumen chemical modification by thiourea dioxide

A. A. Cuadri, Moisés García-Morales, Pedro Partal, 2011 .

Bitumen modification with reactive and non-reactive (virgin and recycled) polymers: A comparative analysis

João C. Bordado, Moisés García-Morales, António Correia Diogo, 2009 .

Bitumen Chemical Foaming for Asphalt Paving Applications

Moisés García-Morales, Pedro Partal, C. Gallegos, 2010 .

Experimental study of grease flow in pipelines: wall slip and air entrainment effects

Pedro Partal, C. Gallegos, P. Partal, 2005 .

Rheological and phase behaviour of paraffin wax/bitumen blends with thermal storage characteristics

P. Partal, F. Navarro, A. Cuadri, 2023, Construction and Building Materials.

Influence of Secondary Homogenisation and Final Thermal Treatment on the Evolution of the Rheological Properties of Model Puddings for Dysphagia Nutritional Support

C. Gallegos, P. Partal, E. B. L. Fuente, 2011 .

Hybrid Rubberised Bitumen from Reactive and Non-Reactive Ethylene Copolymers

P. Partal, F. Navarro, V. Carrera, 2019, Polymers.