I. Pashby

发表

Effective University - Industry Interaction: A Multi-case Evaluation of Collaborative R&D Projects

I. R. Pashby, Tina Angela Barnes, T. Barnes, 2002 .

Microstructure formation in Waspaloy multilayer builds following direct metal deposition with laser and wire

I. R. Pashby, Nur Izan Syahriah Hussein, Joel Segal, 2008 .

Laser drilling of cooling holes in aeroengines: state of the art and future challenges

J. Folkes, I. Pashby, C. McNally, 2004 .

Nd–YAG laser machining of SiC fibre/borosilicate glass composites. Part II. The effect of process variables

I. Pashby, I. Tuersley, T. Hoult, 1998 .

The processing of a magnesium-alumino-silicate matrix, SiC fibre glass-ceramic matrix composite using a pulsed Nd-YAG laser

I. Pashby, I. Tuersley, A. Hoult, 1996, Journal of Materials Science.

The processing of a magnesium-alumino-silicate matrix, SiC fibre glass-ceramic matrix composite using a pulsed Nd-YAG laser

I. Pashby, I. Tuersley, A. Hoult, 1996, Journal of Materials Science.

The processing of SiC/SiC ceramic matrix composites using a pulsed Nd–YAG laser: Part I: Optimisation of pulse parameters

I. Pashby, I. Tuersley, T. Hoult, 1998 .

Nd–YAG laser machining of SiC fibre/borosilicate glass composites. Part I. Optimisation of laser pulse parameters

I. Pashby, I. Tuersley, T. Hoult, 1998 .

The processing of SiC/SiC ceramic matrix composites using a pulsed Nd-YAG laser: Part II The effect of process variables

I. Pashby, I. Tuersley, T. Hoult, 1998 .

A review on the use of environmentally-friendly dielectric fluids in electrical discharge machining

I. Pashby, F. N. Leão, Ian R. Pashby, 2004 .

Sequential laminated tooling, joined by brazing, for injection moulding

I. R. Pashby, B. G. Bryden, I. Pashby, 1999 .

Extrusion based rapid prototyping technique: An advanced platform for tissue engineering scaffold fabrication

Y. L. Chuan, I. Pashby, M. Hoque, 2012, Biopolymers.

Process optimization to improve the processing of poly (DL-lactide-co- glycolide) into 3D tissue engineering scaffolds

Y. L. Chuan, I. Pashby, M. Hoque, 2011 .

Heating performance of electrolytic heat-treatment in aqueous solution by pulse current

T. Leung, I. Pashby, S. Luk, 1997 .

Hole drilling studies with a variable pulse length CO2 laser

I. Pashby, D. Hamilton, I. R. Pashby, 1979 .

The Effect of Workpiece Temperature on the Machinability of an Aluminum/SiC MMC

S. Barnes, I. Pashby, D. Mok, 1996 .

The Measurement of Friction for Superplastic Forming of Ti-6Al-4V

I. R. Pashby, Sean B. Leen, Andrew R. Kennedy, 2004 .

Joining techniques for aluminium spaceframes used in automobiles: Part I — solid and liquid phase welding

I. R. Pashby, T. A Barnes, T. Barnes, 2000 .

Machining of aluminium based metal matrix composites

I. R. Pashby, Stuart Barnes, S. Barnes, 1995 .

A study of the effect of average preset voltage on hardness during electrolytic surface-hardening in aqueous solution

T. Leung, I. Pashby, S. Luk, 1999 .

A Study of the Effect of Average Preset Voltage on Effective Case Depth During Electrolytic Surface-Hardening

T. Leung, I. Pashby, S. Luk, 1999 .

Development of electrolytic heat-treatment in aqueous solution

T. Leung, I. Pashby, S. Luk, 1998 .

Tensile Properties, Microsctructure and Microhardness Analysis of Directly Deposited Waspaloy by Gas Tungsten Arc Welding

M. A. Sulaiman, I. Pashby, N. Hussein, 2020 .

Deposition of Ti–6Al–4V using a high power diode laser and wire, Part I: Investigation on the process characteristics

I. R. Pashby, Guijun Bi, Janet Folkes, 2008 .

Characteristics of the surface of a titanium alloy following milling with abrasive waterjets

I. R. Pashby, P. H. Shipway, P. Shipway, 2005 .

Surface hardening of steel using a high power diode laser

I. R. Pashby, B. G. Bryden, Stuart Barnes, 2003 .

Joining techniques for aluminium spaceframes used in automobiles

I. R. Pashby, T. A Barnes, T. Barnes, 2000 .

Managing collaborative R&D projects development of a practical management tool

Alan Gibbons, Tina Angela Barnes, I. R. Pashby, 2006 .

Through-Tool Coolant Drilling of Aluminum/SiC Metal Matrix Composite

S. Barnes, I. Pashby, Ian R. Pashby, 2000 .

Deposition of Ti–6Al–4V using a high power diode laser and wire, Part II: Investigation on the mechanical properties

I. R. Pashby, Guijun Bi, Joel Segal, 2008 .

High power diode laser cladding

I. R. Pashby, B. G. Bryden, Stuart Barnes, 2003 .

The effect of particle hardness and shape when abrasive water jet milling titanium alloy Ti6Al4V

I. R. Pashby, P. H. Shipway, P. Shipway, 2009 .

Abrasive water-jet controlled depth milling of Ti6Al4V alloy: an investigation of the role of jet-workpiece traverse speed and abrasive grit size on the characteristics of the milled material

P. H. Shipway, P. Shipway, I. Pashby, 2005 .

A technical note on grit embedment following abrasive water-jet milling of a titanium alloy

I. R. Pashby, P. H. Shipway, P. Shipway, 2005 .

3D Multi-architectural Tissue Engineering Scaffolds: Degradation and Cell Culture Study

Y. L. Chuan, I. Pashby, M. Hoque, 2012 .

The effect of high-pressure coolant supply when machining a heat-resistant nickel-based superalloy

Álisson Rocha Machado, Emmanuel O. Ezugwu, I. R. Pashby, 1991 .

Effect of Heat Treatment on the Drilling Performance of Aluminium/SiC MMC

I. R. Pashby, Stuart Barnes, I. Pashby, 1999 .

Machining of advanced engineering materials using traditional and laser techniques

A. Jawaid, I. Pashby, Ian R. Pashby, 1994 .

Review: Various methods of machining advanced ceramic materials

I. R. Pashby, I. P. Tuersley, A. Jawaid, 1994 .

High speed milling of nickel-based superalloys

I. R. Pashby, E. O. Ezugwu, E. Ezugwu, 1992 .

Collaborative R&D projects: a framework for effective management

Alan Gibbons, Tina Angela Barnes, I. R. Pashby, 2000, Proceedings of the 2000 IEEE International Conference on Management of Innovation and Technology. ICMIT 2000. 'Management in the 21st Century' (Cat. No.00EX457).

Collaborative R&D projects: a best practice management model

T. Barnes, I. Pashby, A. Gibbons, 2000, Proceedings of the 2000 IEEE International Conference on Management of Innovation and Technology. ICMIT 2000. 'Management in the 21st Century' (Cat. No.00EX457).

TOOL PERFORMANCE AND CHIP CONTROL WHEN MACHINING Ti6A14V AND INCONEL 901 USING HIGH PRESSURE COOLANT SUPPLY

Álisson Rocha Machado, I. R. Pashby, J. Wallbank, 1998 .

Hot platen brazing to produce laminated steel tooling

I. R. Pashby, B. G. Bryden, I. Pashby, 2001 .