S. Das

发表

Solid particle erosion of Al alloy and Al-alloy composites: Effect of heat treatment and angle of impingement

S. Das, D. Mondal, S. Sawla, 2004 .

Thermo-fluid Mathematical Modeling of Steel Slab Caster: Progress in 21st Century

S. Das, V. Singh, 2016 .

Neural Modeling and Experimental Investigation of the Erosion Characteristics of Boiler Grade Steels Impacted by Fly Ash

S. Das, K. L. Sahoo, D. Mandal, 2015, Journal of Materials Engineering and Performance.

Mathematical model to predict effects of fly ash hardness and angularity on erosion response of typical boiler grade steels

S. Das, 2012 .

Mathematical Modelling of Erosion Behaviour of Impacted Fly Ash Particles on Coal Fired Boiler Components at Elevated Temperature

S. Das, S. Mehrotra, K. M. Godiwalla, 2006 .

Analytical model for erosion behaviour of impacted fly-ash particles on coal-fired boiler components

S. P. Mehrotra, K M Godiwalla, S. Das, 2006 .

Preparation and properties of cast aluminium alloy-granite particle composites

A. H. Yegneswaran, A. K. Jha, M. Singh, 2000 .

Neural Network Modelling to Characterize Steel Continuous Casting Process Parameters and Prediction of Casting Defects

M. M. Humane, S. Das, S. Hore, 2019, Transactions of the Indian Institute of Metals.

MATHEMATICAL MODELLING OF BAGNOLD EFFECT AND SEPARATION BEHAVIOR OF A COAL-WASHING SPIRAL USING A MECHANISTIC APPROACH

S. Das, S. Mehrotra, K. Bhattacharyya, 2007 .

A comparative study on microstructure and mechanical properties near interface for dissimilar materials during conventional V-groove and narrow gap welding

P. Singh, S. Das, K. Sivaprasad, 2017 .

Effect of Stress Relief Annealing on Microstructure & Mechanical Properties of Welded Joints Between Low Alloy Carbon Steel and Stainless Steel

S. Das, P. Singh, S. Das, 2016, Metallurgical and Materials Transactions A.

Feed Water Chemistry-Related Corrosion Failures in Subcritical 250 MW Coal-Fired Boiler

P. K. Srivastava, S. Das, Amrita Kumari, 2016, Journal of Failure Analysis and Prevention.

A triaxial tensile deformation-induced nanoporous structure of aluminium: estimation of surface area, solid volume, and dimensionless aspect ratio.

S. Das, Sunil Kumar, 2017, Physical chemistry chemical physics : PCCP.

Computer simulation of microstructure evolution in strip-cast silicon steel with cube and fibre texture

S. Das, S. Hore, 2019, Philosophical Magazine.

Computational modelling of static recrystallization and two dimensional microstructure evolution during hot strip rolling of advanced high strength steel

S. Das, Simul Banerjee, S. Mukherjee, 2015 .

A multiscale coupled Monte Carlo model to characterize microstructure evolution during hot rolling of Mo-TRIP steel

S. Das, Simul Banerjee, S. Hore, 2013 .

Monte Carlo Simulation of temperature dependence of grain growth kinetics in C-Mn Steel prior to hot rolling

S. Das, S. Hore, 2012 .

Micromechanism of High-Temperature Tensile Deformation Behavior of a Directionally Solidified Nickel Base Superalloy

Shaswat Kumar Das, S. Das, N. Paulose, 2018, Journal of Materials Engineering and Performance.

Effect of plasma ion implantation on the hydrogen embrittlement of Cu strengthened HSLA-100 steel

A. Kumar, S. Das, S. Tarafder, 2003 .

Evolution of nanostructure and mechanical properties of silver nano-particle in the confined region between graphene sheets: An atomistic investigation

S. Das, Sunil Kumar, S. K. Pattanayek, 2018, Computational Materials Science.

Characterization of mechanical properties and nano-porous structure of Aluminium-Magnesium alloy during multi-axial tensile deformation: An atomistic investigation

S. Das, Sunil Kumar, 2018 .

Preparation and properties of cast aluminium alloy-sillimanite particle composite

A. H. Yegneswaran, A. K. Jha, S. Das, 2001 .

Three-body abrasion of a cast zinc–aluminium alloy: influence of Al2O3 dispersoid and abrasive medium

A. H. Yegneswaran, A. K. Jha, O. P. Modi, 2001 .

Abrasive wear response of aluminium alloy-sillimanite particle reinforced composite under low stress condition

S. Das, D. Mondal, M. Singh, 2006 .

Microstructure and wear of zinc-aluminium alloys : Influence of secondary processing and alloy composition

A. H. Yegneswaran, A. K. Jha, O. P. Modi, 1999 .

Erosion-corrosion-abrasion characteristics in slurry of a zinc based alloy and its composite containing alumina particle dispersoid

A. H. Yegneswaran, A. K. Jha, O. P. Modi, 2001 .

An artificial neural network model to characterize porosity defects during solidification of A356 aluminum alloy

S. Das, Ishita Ghosh, N. Chakraborty, 2014, Neural computing & applications (Print).

Phenomenological kinetic model of the nano-bainitic steels to characterize the dynamics of the autocatalytic nucleation process

S. Das, M. Shah, Ankita Pastor, 2020, SN Applied Sciences.

Impact of Boiler Water Chemistry on Waterside Tube Failures

P. K. Srivastava, S. Das, Amrita Kumari, 2015 .

An Artificial Neural Network Model to Predict the Bainite Plate Thickness of Nanostructured Bainitic Steels Using an Efficient Network-Learning Algorithm

S. Das, M. Shah, 2018, Journal of Materials Engineering and Performance.

Artificial neural network modeling and experimental investigation to characterize the dewatering performance of a hydrocyclone

S. Das, S. Mohanty, A. Majumder, 2019, Mineral Processing and Extractive Metallurgy.

Data-driven modeling of fireside corrosion rate

P. K. Srivastava, S. Das, Amrita Kumari, 2017 .

Data-driven modeling of corrosion and scale deposition rate in economizer

P. K. Srivastava, S. Das, Amrita Kumari, 2017 .

Estimation of Scale Deposition in the Water Walls of an Operating Indian Coal Fired Boiler: Predictive Modeling Approach Using Artificial Neural Networks

P. K. Srivastava, S. Das, Amrita Kumari, 2016 .

Creep‐fatigue deformation micromechanisms of a directionally solidified nickel‐base superalloy at 850°C

S. Das, N. Paulose, J. Sahu, 2019, Fatigue & Fracture of Engineering Materials & Structures.

Creep deformation micro-mechanisms of CM 247 DS LC Ni-base superalloy under relevant service condition

S. Das, A. Pramanick, N. Paulose, 2019, Materials Characterization.

Low stress abrasive wear behavior of a hardfaced steel

A. H. Yegneswaran, A. K. Jha, O. P. Modi, 1998 .

Efficiency Study of a Water-Only Cyclone by Experimental and Data Modeling Techniques when Cleaning Indian Coal Fines

Suchandan K Das, Ratnakar Singh, S Hore, 2012 .

Influence of microstructure and experimental parameters on the erosion–corrosion behavior of Al alloy composites

S. Das, D. Mondal, Y. Saraswathi, 2006 .

Thermal modelling of DC continuous casting including submould boiling heat transfer

S. Das, 1999 .

Computational modelling of thermal transport phenomena in continuous casting process based on non-orthogonal control volume approach

S. Das, A. Sarkar, 1996 .

Evaluation of solid-liquid interface profile during continuous casting by a spline based formalism

S. Das, 2001 .

FEM modeling of the interface and its effect on the elastio-plastic behavior of metal matrix composites

S. Das, D. Mondal, S. Das, 2006 .

Function space theory of dynamic nucleation during solidification at high cooling rates

S. Das, 1997 .

An integrated phenomenological process model for prediction of oxygen pickup during open air tapping and pouring of liquid steel

S. Das, R. Singla, S. Tripathy, 2019, Chemical Engineering Science.

Heat transfer modelling of dropwise condensation behaviour of magnesium vapours in the electrothermal production of magnesium

S. Das, Manoj Kumar, K. Kumar, 2020 .

Accurate Identification of Transformer Faults From Dissolved Gas Data Using Recursive Feature Elimination Method

S. Das, S. Chatterjee, A. Paramane, 2023, IEEE Transactions on Dielectrics and Electrical Insulation.

Reactivity-Controlled Aggregation of Graphene Nanoflakes in Aluminum Matrix: Atomistic Molecular Dynamics Simulation

S. Das, Sunil Kumar, S. K. Pattanayek, 2019, The Journal of Physical Chemistry C.

A Mathematical Model for Prediction of Physical Properties of the Coke Oven Charge During Carbonisation

S. Das, S. Mehrotra, K. M. Godiwalla, 2007 .

Intestinal nitric oxide synthase (NOS) in broiler chick: Cloning, sequencing and homology analysis

S. Das, S. Bandyopadhyay, D. Bhattacharya, 2009, Proceedings of the Zoological Society.

Effect of Addition of Fine SiC Particles on the Dry Sliding Wear Behaviour of Extruded 2014 Al-Alloy

A. K. Jha, S. Das, R. Dasgupta, 2013 .