S. Rues

发表

Muscle and joint forces under variable equilibrium states of the mandible

K. Schweizerhof, J. Lenz, H. Schindler, 2011, Clinical Oral Investigations.

Small unilateral jaw gap variations: equilibrium changes, co-contractions and joint forces.

K. Schweizerhof, J. Lenz, H. Schindler, 2009, Journal of oral rehabilitation.

Jaw Clenching: Muscle and Joint Forces, Optimization Strategies

J Lenz, J C Türp, S Rues, 2007, Journal of dental research.

Activity patterns of the masticatory muscles during feedback-controlled simulated clenching activities.

K. Schweizerhof, J. Lenz, H. Schindler, 2005, European journal of oral sciences.

Resistance to Fracture in Fixed Dental Prostheses Over Cemented and Screw-Retained Implant-Supported Zirconia Cantilevers in the Anterior Region: An In Vitro Study.

S. Rues, S. Kappel, Dorothee Ruckes, 2020, The International journal of oral & maxillofacial implants.

Fracture resistance of glazed, full-contour ZLS incisor crowns.

M. Schmitter, S. Rues, F. S. Schwindling, 2017, Journal of prosthodontic research.

Motor behavior of the jaw muscles during different clenching levels.

K. Schweizerhof, J. Lenz, H. Schindler, 2008, European journal of oral sciences.

Heterogeneous activation of the medial pterygoid muscle during simulated clenching.

J. Lenz, H. Schindler, S. Rues, 2006, Archives of oral biology.

Effect of impact velocity and specimen stiffness on contact forces in a weight-controlled chewing simulator.

S. Rues, P. Rammelsberg, G. Huber, 2011, Dental materials : official publication of the Academy of Dental Materials.

Effect of Mesh Homogeneity and Choice of Target Surface on Statistical Evaluation of Mesh Differences

S. Rues, P. Rammelsberg, A. Zenthöfer, 2021 .

Effect of bone quality and quantity on the primary stability of dental implants in a simulated bicortical placement

M. Schmitter, S. Rues, S. Kappel, 2020, Clinical Oral Investigations.

Accuracy of complete-arch intraoral scans based on confocal microscopy versus optical triangulation: A comparative in vitro study.

S. Rues, P. Rammelsberg, M. Waldecker, 2020, The Journal of prosthetic dentistry.

Effects of Training on the Execution of Complete-Arch Scans. Part 2: Scanning Accuracy.

S. Rues, P. Rammelsberg, M. Waldecker, 2021, The International journal of prosthodontics.

Disposable plastic trays and their effect on polyether and vinyl polysiloxane impression accuracy—an in vitro study

S. Rues, P. Rammelsberg, A. Zenthöfer, 2020, Clinical oral investigations.

Accuracy of a New Fast-Setting Polyether Impression Material.

S. Rues, Dorothee Ruckes, P. Rammelsberg, 2020, The International journal of prosthodontics.

Three-dimensional accuracy of partially-guided implant surgery based on dental magnetic resonance imaging.

S. Heiland, M. Bendszus, S. Rues, 2021, Clinical oral implants research.

Long-term training effects on masticatory muscles.

H. Schindler, S. Rues, D. Hellmann, 2011, Journal of oral rehabilitation.

Influence of neck rotation and neck lateroflexion on mandibular equilibrium.

K. Schweizerhof, J. Lenz, H. Schindler, 2010, Journal of oral rehabilitation.

Validation of in-vitro tests of zirconia-ceramic inlay-retained fixed partial dentures: A finite element analysis.

S. Rues, P. Rammelsberg, M. Waldecker, 2019, Dental materials : official publication of the Academy of Dental Materials.

Assessing abrasion of orthodontic surface sealants using a modified ophthalmic optical coherence tomography device

S. Rues, M. Brockmann, K. Kunzmann, 2018, Clinical Oral Investigations.

In vitro comparison of the load‐bearing capacity of ceramic and metal‐ceramic resin‐bonded fixed dental prostheses in the posterior region

S. Rues, J. Krisam, P. Rammelsberg, 2018, The Journal of prosthetic dentistry.

Osteoblast behaviour on zirconia fabricated by additive and subtractive technology

S. Rues, P. Rammelsberg, F. S. Schwindling, 2022, Ceramics International.

FE-simulation Of The Maxillary SinusFloor Augmentation

K. Schweizerhof, H. Schierle, J. Lenz, 2005 .

The effect of titanium anodization on the bond strength of 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) resin cement.

S. Rues, P. Rammelsberg, W. Bömicke, 2022, The International journal of prosthodontics.

Is mechanical retention for adhesive core build-up needed to restore a vital tooth with a monolithic zirconium crown? - An in vitro study.

K. Walczak, M. Schmitter, S. Rues, 2016, Acta of bioengineering and biomechanics.

Effect on in vitro fracture resistance of the technique used to attach lithium disilicate ceramic veneer to zirconia frameworks.

M. Schmitter, S. Rues, M. Schweiger, 2014, Dental materials : official publication of the Academy of Dental Materials.

Chipping behaviour of all-ceramic crowns with zirconia framework and CAD/CAM manufactured veneer.

M. Schmitter, S. Rues, D. Mueller, 2012, Journal of dentistry.

Fracture behavior of all-ceramic, implant-supported, and tooth–implant-supported fixed dental prostheses

M. Schmitter, S. Rues, P. Rammelsberg, 2018, Clinical Oral Investigations.

Orthodontic shear bond strength and ultimate load tests of CAD/CAM produced artificial teeth

S. Rues, P. Rammelsberg, A. Zenthöfer, 2022, Clinical Oral Investigations.

Color stability of polymer-infiltrated-ceramics compared with lithium disilicate ceramics and composite.

S. Rues, P. Rammelsberg, A. Zenthöfer, 2019, Journal of esthetic and restorative dentistry : official publication of the American Academy of Esthetic Dentistry ... [et al.].

Wear of resin denture teeth in partial removable dental prostheses.

J. L. Bermejo, S. Rues, P. Rammelsberg, 2019, Journal of prosthodontic research.

Fit of anterior restorations made of 3D-printed and milled zirconia: An in-vitro study.

S. Rues, P. Rammelsberg, A. Zenthöfer, 2023, Journal of dentistry.

The Effects of Surface Conditioning and Aging on the Bond Strength Between Composite Cement and Zirconia-reinforced Lithium-Silicate Glass-Ceramics.

S. Rues, J. Krisam, P. Rammelsberg, 2019, The journal of adhesive dentistry.

Durability of Resin-Zirconia Bonds Produced Using Methods Available in Dental Practice.

S. Rues, J. Krisam, P. Rammelsberg, 2016, The journal of adhesive dentistry.

Failure load of teeth restored by use of alumina copings: Influence of residual tooth structure and cementation.

M. Schmitter, S. Rues, P. Rammelsberg, 2013, Dental materials journal.

Strength and reliability of zirconia fabricated by additive manufacturing technology.

S. Rues, P. Rammelsberg, A. Zenthöfer, 2022, Dental materials : official publication of the Academy of Dental Materials.

Tooth substance removal for ceramic single crown materials—an in vitro comparison

S. Rues, P. Rammelsberg, F. S. Schwindling, 2018, Clinical Oral Investigations.

Mechanical properties of CAD/CAM-fabricated in comparison to conventionally fabricated functional regulator 3 appliances

S. Rues, Dorothee Ruckes, A. Zenthöfer, 2021, Scientific Reports.

Fracture resistance of incisor teeth restored using fibre-reinforced posts and threaded metal posts: effect of post length, location, pretreatment and cementation of the final restoration.

M. Schmitter, S. Rues, P. Rammelsberg, 2010, International endodontic journal.

Two-Body Wear of CoCr Fabricated by Selective Laser Melting Compared with Different Dental Alloys

Franz Sebastian Schwindling, Thomas Stober, Stefan Rues, 2015, Tribology Letters.

Comparison of fracture-load values of cantilevered FDPs

S. Rues, P. Rammelsberg, B. Ohlmann, 2013, Acta odontologica Scandinavica.

Biomechanical properties of masticatory balance in cases with RPDs—The influence of preferred and nonpreferred chewing side: A pilot study

J. Lenz, H. Schindler, S. Rues, 2022, Clinical and experimental dental research.

Teeth restored using fiber-reinforced posts: in vitro fracture tests and finite element analysis.

J Lenz, S Rues, K. Schweizerhof, 2010, Acta biomaterialia.

Accuracy of 3D Printing Compared with Milling - a Multi-Center Analysis of Try-In Dentures.

S. Rues, P. Rammelsberg, F. S. Schwindling, 2021, Journal of dentistry.

A methodological approach to assessing alveolar ridge preservation procedures in humans: soft tissue profile.

M. Schmitter, S. Rues, E. Rompen, 2014, Clinical oral implants research.

Influence of geometric dimensions on early failures of adhesively retained composite resin core build‐ups

S. Rues, P. Rammelsberg, A. Zenthöfer, 2022, Journal of Esthetic and Restorative Dentistry.

In vitro investigation on extensively destroyed vital teeth: is fracture force a limiting factor for direct restoration?

M. Schmitter, S. Rues, J. Krisam, 2014, Journal of oral rehabilitation.

Cemented Single Crown Retention on Dental Implants: An In Vitro Study.

S. Rues, S. Kappel, P. Rammelsberg, 2017, The International journal of prosthodontics.

In vitro fracture load of monolithic lithium disilicate ceramic molar crowns with different wall thicknesses

M. Schmitter, S. Rues, Bodo Seydler, 2014, Clinical Oral Investigations.

Non-invasive three-dimensional thickness analysis of oral epithelium based on optical coherence tomography—development and diagnostic performance

S. Rues, P. Rammelsberg, F. S. Schwindling, 2021, Heliyon.

Fracture Behavior of Minimally Invasive, Posterior, and Fixed Dental Prostheses Manufactured from Monolithic Zirconia.

M. Schmitter, S. Rues, P. Rammelsberg, 2016, Journal of esthetic and restorative dentistry : official publication of the American Academy of Esthetic Dentistry ... [et al.].

Effect of firing protocols on cohesive failure of all-ceramic crowns.

Stefan Rues, Marc Schmitter, Elke Kröger, 2010, Journal of dentistry.

Influence of surface treatment on the in-vitro fracture resistance of zirconia-based all-ceramic anterior crowns.

M. Schmitter, S. Rues, W. Bömicke, 2015, Dental materials : official publication of the Academy of Dental Materials.

Color stability of individually stained monolithic zirconia following occlusal adjustment.

S. Rues, P. Rammelsberg, A. Zenthöfer, 2020, Journal of esthetic and restorative dentistry : official publication of the American Academy of Esthetic Dentistry ... [et al.].

In vitro chipping behaviour of all-ceramic crowns with a zirconia framework and feldspathic veneering: comparison of CAD/CAM-produced veneer with manually layered veneer.

M. Schmitter, S. Rues, D. Mueller, 2013, Journal of oral rehabilitation.

Comparability of clinical wear measurements by optical 3D laser scanning in two different centers.

V. Rousson, S. Rues, T. Stober, 2014, Dental materials : official publication of the Academy of Dental Materials.

Biaxial flexural strength of zirconia: A round robin test with 12 laboratories.

S. Begand, R. Frankenberger, C. Bourauel, 2020, Dental materials : official publication of the Academy of Dental Materials.

In-vivo accuracy of tooth surface reconstruction based on CBCT and dental MRI-a clinical pilot study.

Martin Bendszus, Franz Sebastian Schwindling, Tim Hilgenfeld, 2019, Clinical oral implants research.

Influence of artificial landmarks on the accuracy of complete arch scans in the partially edentulous maxilla: An in vitro study.

S. Rues, P. Rammelsberg, M. Waldecker, 2022, The Journal of prosthetic dentistry (Print).

Effect of scan-path length on the scanning accuracy of completely dentate and partially edentulous maxillae.

S. Rues, P. Rammelsberg, M. Waldecker, 2022, The Journal of prosthetic dentistry.

In vitro accuracy of digital and conventional impressions in the partially edentulous maxilla

S. Rues, P. Rammelsberg, M. Waldecker, 2022, Clinical Oral Investigations.

In-vitro accuracy of complete arch scans of the fully dentate and the partially edentulous maxilla

S. Rues, P. Rammelsberg, M. Waldecker, 2021 .

Factors affecting wear of composite resin denture teeth—24-month results from a clinical study

S. Rues, P. Rammelsberg, T. Stober, 2011, Clinical Oral Investigations.

Assessing abrasion of orthodontic surface sealants using a modified ophthalmic optical coherence tomography device

S. Rues, M. Brockmann, K. Kunzmann, 2018, Clinical Oral Investigations.

Forces and motor control mechanisms during biting in a realistically balanced experimental occlusion.

Jens C Türp, Karl Schweizerhof, Jürgen Lenz, 2008, Archives of oral biology.

An analysis of the measurement principle of smart brackets for 3D force and moment monitoring in orthodontics.

B G Lapatki, S Rues, B Panchaphongsaphak, 2011, Journal of biomechanics.

Debonding Forces for Two-Piece Zirconia Abutments with Implant Platforms of Different Diameter and Use of Different Luting Strategies.

M. Schmitter, S. Rues, J. Krisam, 2018, The International journal of oral & maxillofacial implants.

Retentive force of conical crowns combining zirconia and fiber-reinforced composite.

S. Rues, P. Rammelsberg, F. S. Schwindling, 2022, Journal of dentistry.

Factors affecting wear of composite resin denture teeth—24-month results from a clinical study

J. Dreyhaupt, S. Rues, P. Rammelsberg, 2012, Clinical Oral Investigations.

Fracture behavior of all-ceramic, implant-supported, and tooth–implant-supported fixed dental prostheses

M. Schmitter, S. Rues, P. Rammelsberg, 2017, Clinical Oral Investigations.

Effects of Cement, Abutment Surface Pretreatment, and Artificial Aging on the Force Required to Detach Cantilever Fixed Dental Prostheses from Dental Implants.

M. Schmitter, S. Rues, S. Kappel, 2017, The International journal of prosthodontics.

Impact of post printing cleaning methods on geometry, transmission, roughness parameters, and flexural strength of 3D-printed zirconia.

S. Rues, P. Rammelsberg, F. S. Schwindling, 2023, Dental Materials.

Thermo-flexible resin for the 3D printing of occlusal splints: a randomized pilot trial.

S. Rues, P. Rammelsberg, F. S. Schwindling, 2023, Journal of dentistry.

In-vitro accuracy of complete arch scans of the fully dentate and the partially edentulous maxilla.

S. Rues, P. Rammelsberg, W. Bömicke, 2021, Journal of prosthodontic research.

Biaxial flexural strength of 3D-printed 3Y-TZP zirconia using a novel ceramic printer

S. Rues, A. Ilani, Clemens Schmitt, 2024, Clinical oral investigations.

Effect of firing time and wall thickness on the biaxial flexural strength of 3D-printed zirconia.

S. Rues, F. S. Schwindling, Christopher Herpel, 2023, Dental materials : official publication of the Academy of Dental Materials.

In vitro chipping behaviour of all-ceramic crowns with a zirconia framework and feldspathic veneering: comparison of CAD/CAM-produced veneer with manually layered veneer.

S. Rues, D. Mueller, Marc Schmitter, 2013, Journal of oral rehabilitation.