J. Tartaj

发表

Synthesis and AC magnetic susceptibility measurements of Fe (2- x) Al x O 3 compounds

M. Villafuerte-Castrejón, E. Castillo-Pereyra, J. Tartaj, 2004 .

Processing and characterisation of a fine nickel oxide/zirconia/composite prepared by polymeric complex solution synthesis

J. Tartaj, C. Moure, P. Durán, 2003 .

Sinterability, microstructures and electrical properties of Ni/Gd-doped ceria cermets used as anode materials for SOFCs

J. Tartaj, C. Moure, V. Gil, 2007 .

Sintering behaviour of Y2O3 powders prepared by the polymer complex solution method

J. Tartaj, C. Moure, P. Durán, 2002 .

Synthesis and sintering behaviour of spinel-type CoxNiMn2-xO4 (0.2 ≤ x ≤ 1.2) prepared by the ethylene glycol-metal nitrate polymerized complex process

J. Tartaj, C. Moure, P. Durán, 2005 .

Preparation and sintering behaviour of spinel-type CoxNiMn2−xO4 (0.2 ≤ x ≤ 1.2) by the ethylene glycol–metal nitrate polymerized complex process

J. Tartaj, C. Moure, P. Durán, 2005 .

Preparation and powder characterization of spinel-type CoxNiMn2−xO4 (0.2⩽x⩽1.2) by the ethylene glycol–metal nitrate polymerized complex process

J. Tartaj, C. Moure, P. Durán, 2004 .

Preparation, characterization and sintering behavior of spherical iron oxide doped alumina particles

P. Tartaj, J. Tartaj, 2002 .

Chemical and electrical features of the interphase: electrode–electrolyte in the system (Y,Ca)MnO3–CeO2–Y2O3

J. Tartaj, C. Moure, P. Durán, 2001 .

Sintering Behavior and Electrical Properties of Nanosized Doped‐ZnO Powders Produced by Metallorganic Polymeric Processing

J. Tartaj, C. Moure, P. Durán, 2004 .

A significant improvement of the processing and electric properties of CeO2 co-doped with Ca and Sm by mechanosynthesis

J. Tartaj, A. Moure, C. Moure, 2011 .

Single-phase ceramics with La1−xSrxGa1−yMgyO3−δ composition from precursors obtained by mechanosynthesis

J. Tartaj, A. Moure, A. Castro, 2009 .

Synthesis, sintering and electrical properties of YNi0.33Mn0.67O3 perovskite prepared by a polymerized method

J. Tartaj, C. Moure, P. Durán, 2003 .

Synthesis, sintering and ionic conductivity of scandia-doped ceria ceramic materials obtained by different procedures

J. Tartaj, A. Moure, A. Castro, 2012 .

Synthesis, sintering and electrical properties of gadolinia- calcia-doped ceria

J. Tartaj, A. Moure, C. Moure, 2011 .

Synthesis and Low‐Temperature Sintering of Gd‐doped CeO2 Ceramic Materials Obtained by a Coprecipitation Process

J. Tartaj, A. Moure, C. Moure, 2009 .

Synthesis, sintering and electrical properties of yttria–calcia-doped ceria

J. Tartaj, A. Moure, C. Moure, 2009 .

Low temperature synthesis and sintering behaviour of Gd-doped ceria nanosized powders: comparison between two synthesis procedures

J. Tartaj, C. Moure, V. Gil, 2009 .

Chemical and thermomechanical compatibility between Ni–GDC anode and electrolytes based on ceria

J. Tartaj, C. Moure, V. Gil, 2009 .

Microstructural Evolution of Iron-Oxide-Doped Alumina Nanoparticles Synthesized from Microemulsions

J. Tartaj, and Pedro Tartaj, 2002 .

Performance and degradation of La0.8Sr0.2Ga0.85Mg0.15O3−δ electrolyte-supported cells in single-chamber configuration

M. Segarra, F. Espiell, J. Tartaj, 2014 .

Electrical and mechanical characterization by instrumented indentation technique of La0.85Sr0.15Ga0.8Mg0.2O3−δ electrolyte for SOFCs

M. Segarra, J. Tartaj, A. Moure, 2012 .

BaTiO_3 formation by thermal decomposition of a (BaTi)-citrate polyester resin in air

J. Tartaj, C. Moure, P. Durán, 2001 .

Influence of seeding on the crystallisation kinetics of PbTiO3 from gel-derived precursors

J. Tartaj, C. Moure, P. Durán, 2001 .

Doping influence on the stability of YMnO3 orthorhombic perovskite obtained by mechanosynthesis

J. Galy, J. Tartaj, T. Hungría, 2012 .

Processing and characterization of Sr doped BiFeO3 multiferroic materials by high energetic milling

J. Tartaj, A. Moure, C. Moure, 2011 .

Metal citrate polymerized complex thermal decomposition leading to the synthesis of BaTiO3: effects of the precursor structure on the BaTiO3 formation mechanism

M. Bañares, J. Tartaj, C. Moure, 2001 .

Low‐Temperature Synthesis of Bismuth Titanate Niobate (Bi7Ti4NbO21) Nanoparticles from a Metal‐organic Polymeric Precursor

J. Tartaj, M. Villegas, C. Moure, 2004 .

Microstructural Bases for the Superior Densification of Gels doped with Alumina Nanoseeds

P. Tartaj, J. Tartaj, 2006 .

Sol‐gel Cyclic Self‐Production of α‐Al2O3 Nanoseeds as a Convenient Route for the Low Cost Preparation of Dense Submicronic Alumina Sintered Monoliths

P. Tartaj, J. Tartaj, E. Lachowski, 2002 .

Seeding effects on crystallization of air-calcined Y-TZP amorphous precursors

J. Tartaj, C. Moure, P. Durán, 1997 .

Anisotropic grain growth in α-Fe2O3-doped alumina

G. Messing, J. Tartaj, 1997 .

Síntesis, sinterización y propiedades eléctricas de soluciones sólidas YNixMn1-xO3 preparadas a partir de Precursores Poliméricos

J. Tartaj, P. Durán, C. Moure, 2001 .

A review of doped lanthanum gallates as electrolytes for intermediate temperature solid oxides fuel cells: From materials processing to electrical and thermo-mechanical properties

M. Segarra, J. Tartaj, J. Roa, 2016 .

On the formation of an oxycarbonate intermediate phase in the synthesis of BaTiO3 from (Ba,Ti)-polymeric organic precursors

Miguel A. Bañares, M. Bañares, J. Tartaj, 2002 .

Low-temperature densification and grain growth of Bi2O3-doped-ceria gadolinia ceramics

J. Tartaj, C. Moure, P. Durán, 2007 .

Densification behaviour, microstructure development and dielectric properties of pure BaTiO3 prepared by thermal decomposition of (Ba, Ti)-citrate polyester resins

J. Tartaj, C. Moure, P. Durán, 2002 .

Heating-rate effect on the BaTiO3 formation by thermal decomposition of metal citrate polymeric precursors

J. Tartaj, C. Moure, P. Durán, 2001 .

Crystalline and magnetic properties of Er and Yb chromites modified by Mn and Ca cations

J. Tartaj, A. Moure, C. Moure, 2012 .

Effect of the addition of α-Fe2O3 on the microstructural development of boehmite-derived alumina

G. Messing, J. Tartaj, 1997 .

Sintering of dense ceramics bodies of pure lead titanate obtained by seeding-assisted chemical sol-gel

J. Tartaj, C. Moure, P. Durán, 2001 .

Mechanosynthesis of perovskite LaGaO3 and its effect on the sintering of ceramics

J. Tartaj, A. Moure, A. Castro, 2009 .

Formation, sintering and thermal expansion behaviour of Sr- and Mg-doped LaCrO3 as SOFC interconnector prepared by the ethylene glycol polymerized complex solution synthesis method

J. Tartaj, C. Moure, P. Durán, 2004 .

Cerium (IV) oxide synthesis and sinterable powders prepared by the polymeric organic complex solution method

J. Tartaj, C. Moure, P. Durán, 2002 .

Crystallisation and sintering behaviour of nanocrystalline Y-TZP powders obtained by seeding-assisted chemical coprecipitation

J. Tartaj, M. Villegas, C. Moure, 1999 .

A Strategic Two‐Stage Low‐Temperature Thermal Processing Leading to Fully Dense and Fine‐Grained Doped‐ZnO Varistors

J. Tartaj, C. Moure, P. Durán, 2002 .

Effects of seeding on the crystallisation kinetics of air-calcined yttria-doped hydrous zirconia

J. Tartaj, C. Moure, P. Durán, 1998 .

Sintering, microstructural development, and electrical properties of gadolinia-doped ceria electrolyte with bismuth oxide as a sintering aid

J. Tartaj, C. Moure, P. Durán, 2006 .

Sintering behaviour and microstructural evolution of agglomerated spherical particles of high-purity barium titanate

J. Tartaj, C. Moure, P. Durán, 2003 .

Influence of seeding on the crystallization kinetics of air-calcined Y-TZP gel-derived precursors

J. Tartaj, C. Moure, P. Durán, 1997 .

Electrical behaviour of Bi5FeTi3O15 and its solid solutions with CaBi4Ti4O15

J. Tartaj, C. Moure, P. Durán, 2003 .

Magnetic properties of Aurivillius lanthanide-bismuth (LnFeO3)nBi4Ti3O12 (n = 1,2) layered titanates

J. Tartaj, C. Moure, V. Gil, 2008 .

Microstructure development and densification of ultrafine Y-TZP monoliths obtained by seeding-assisted chemical coprecipitation

J. Tartaj, E. Lachowski, C. Moure, 2000 .

Lower air-crystallization temperature and nanostructured yttria-doped tetragonal zirconia polycrystals ceramics by seeding assisted chemical coprecipitation

J. Tartaj, C. Moure, P. Durán, 1999 .

Low-temperature air-crystallised nanocrystalline Y-TZP powder and nanostructured ceramics by seeding-assisted-chemical co-precipitation

J. Tartaj, C. Moure, P. Durán, 1998 .

Obtención de PbTiO3 vía semillado de geles

M. E. Villafuerte-Castrejón, J. Tartaj, C. Moure, 1999 .

Processing and properties of superconducting YBa2Cu3O7−x powder by single-step calcining in air

J. Colino, J. Tartaj, J. L. Garcia-fierro, 1991 .

Preparation and sintering behaviour of YBaCuO thick films prepared by tape casting

J. Tartaj, C. Moure, P. Durán, 1992 .

Chemical and thermomechanical compatibility between neodymium manganites and electrolytes based on ceria

J. Tartaj, C. Moure, V. Gil, 2008 .

Correlation between electrical and mechanical properties in La1−xSrxGa1−yMgyO3−δ ceramics used as electrolytes for solid oxide fuel cells

M. Segarra, F. Espiell, J. Tartaj, 2014 .

Performance and short-term stability of single-chamber solid oxide fuel cells based on La0.9Sr0.1Ga0.8Mg0.2O3−δ electrolyte

M. Segarra, J. Tartaj, J. Roa, 2012 .

Nanostructured La1−xSrxGa1−yMgyO3−δ Ceramics Processed by Spark Plasma Sintering of Mechanosynthesized Precursors

J. Galy, J. Tartaj, A. Moure, 2010 .

Mechanosynthesis of the Orthorhombic Perovskites ErMn1−xNixO3 (x = 0, 0.1). Processing and Characterization of Nanostructured Ceramics

J. Galy, J. Tartaj, T. Hungría, 2010 .

Crystalline structure, dielectric and piezoelectric properties of bismuth-layer CaxBi4Ti3+xO12+3x (x = 1, 2) compounds

J. Tartaj, C. Moure, P. Durán, 2005 .

Low‐Temperature Preparation of La0.6Sr0.4Fe0.8Co0.2O3–δ Sinterable Nanopowders by the Polymeric Organic Complex Solution Method

J. Tartaj, A. Moure, J. M. Pérez-Falcón, 2011 .

Processing and dielectric properties of the mixed-layer bismuth titanate niobate Bi7Ti4NbO21 by the metal-organic precursor synthesis method

J. Tartaj, M. Villegas, C. Moure, 2001 .

Effects of Low-Temperature Annealing on the Microstructure and Electrical Properties of Doped-ZnO Varistors

J. Tartaj, C. Moure, P. Durán, 2001 .

Rapid densification by using Bi2O3 as an aid for sintering of gadolinia-doped ceria ceramics

J. Tartaj, C. Moure, P. Durán, 2007 .

Low-temperature preparation by polymeric complex solution synthesis of Cu–Gd-doped ceria cermets for solid oxide fuel cells anodes: Sinterability, microstructures and electrical properties

J. Tartaj, A. Moure, V. Gil, 2010 .

Two‐Stage Sintering of Nanosize Pure Zirconia

P. Tartaj, J. Tartaj, 2009 .

Vidrio Magnetic behavior of solid solutions REMe 0 . 50 Mn 0 . 50 O 3 ( RE = Y , La , Pr

J. Tartaj, C. Moure, V. Gil, 2008 .

Fully dense, fine-grained, doped zinc oxide varistors with improved nonlinear properties by thermal processing optimization

J. Tartaj, C. Moure, P. Durán, 2003 .

Phase transitions induced on hexagonal manganites by the incorporation of aliovalent cations on A or B lattice sites

J. Tartaj, C. Moure, P. Durán, 1999 .

Effect of Bi2O3 addition on the sintering and microstructural development of gadolinia-doped ceria ceramics

J. Tartaj, C. Moure, P. Durán, 2007 .

Powder processing, crystalline structure, sintering, and electrical properties of NdM0.5Mn0.5O3 (M = Ni, Co, Cu) manganites

J. Tartaj, C. Moure, P. Durán, 2005 .

A note on the different crystalline features of the EuMnO3-based solid solutions as a function of the modifying cation nature

J. Tartaj, A. Moure, C. Moure, 2010 .

Crystalline structure of the manganites solid solution RE(Me,Mn)O3, (RE=Gd,Er; Me=Ni,Co)

J. Tartaj, A. Moure, C. Moure, 2009 .

Phase transition and electrical conductivity in the system YMnO3-CaMnO3

J. Tartaj, M. Villegas, C. Moure, 1999 .

Magnetic behavior of solid solutions REMe0.50Mn0.50O3 (RE = Y, La, Pr, Nd, Eu, Gd, Er ; Me = Ni,Co)

J. Tartaj, C. Moure, V. Gil, 2008 .

Low-temperature fully dense and electrical properties of doped-ZnO varistors by a polymerized complex method

J. Tartaj, C. Moure, P. Durán, 2002 .

Low temperature synthesis of bismuth titanate niobate nanoparticles from polymeric precursor

J. Tartaj, M. Villegas, C. Moure, 2000 .