S. Koh

发表

Multifunctional transducer using poly (vinylidene fluoride) active layerand highly conducting poly (3,4-ethylenedioxythiophene) electrode: Actuator and generator

Sang-Kook Han, Sang‐Kook Han, J. Joo, 2004 .

Actuation of PVDF Cantilever with PEDOT/PSS (DMSO) Electrode Using Ion-Assisted-Reaction

J. Joo, C. S. Lee, S. Koh, 2004 .

Organic Based Flexible Speaker Through Enhanced Conductivity of PEDOT/PSS with Various Solvents

J. Joo, C. S. Lee, S. Koh, 2003 .

Flexible and transparent organic film speaker by using highly conducting PEDOT/PSS as electrode

B. G. Wagh, Sung Han, D. E. Lee, 2003 .

Poly (vinylidene fluoride) transducers with highly conducting poly (3,4-ethylenedioxythiophene) electrodes

Sung Han, J. Joo, C. S. Lee, 2005 .

Electrical Resistivity of Copper Films by Partially Ionized Beam Deposition

S. Han, S. Koh, K. Yoon, 1996 .

Effects of ion bombardment with reactive gas environment on adhesion of Au films to Parylene C film

K. W. Kim, J. Lee, S. Koh, 2005 .

Improvement of adhesion between plastic substrates and antireflection layers by ion-assisted reaction

S. Koh, J. Cho, Dong-Ho Kim, 2004 .

Surface modification of polymers by ion-assisted reaction

S. Koh, K. Kim, J. Cho, 2003 .

Improving adhesion between thin chromium film and polyimide substrate by Ar+ irradiation

S. Koh, K. Pae, R. Caracciolo, 1992 .

Tin-doped indium oxide (ITO) film deposition by ion beam sputtering

S. Koh, J. Cho, Donghwan Kim, 2001 .

Surface Modification by Ion Assisted Reaction

S. Koh, K. Kim, J. Cho, 2002 .

Enhancing adhesion between metals or epoxy and polytetrafluoroethylene by ion assisted reaction

S. Koh, W. Choi, Hyung-Jin Jung, 1998 .

Surface Modification of Polytetrafluoroethylene by Ar + Irradiation for Improving Adhesion to other Materials

S. Koh, S. Park, W. Choi, 1996 .

Material properties and growth control of undoped and Sn-doped In2O3 thin films prepared by using ion beam technologies

S. Koh, J. Cho, Un-Jung Yeo, 2006 .

Effects of substrate treatment on the initial growth mode of indium-tin-oxide films

S. Koh, J. Cho, Dong-Ho Kim, 2005 .

Enhanced olefin carrier activity of clean surface silver nanoparticles for facilitated transport membranes

S. Koh, Y. Kang, S. Kang, 2009 .

Low temperature deposition of ITO thin films by ion beam sputtering

S. Koh, J. Cho, Dong-Ho Kim, 2000 .

Advanced ion beam technology for versatile oxide thin film formation

S. Koh, J. Cho, Un-Jung Yeo, 2007 .

Chemical shifts and optical properties of tin oxide films grown by a reactive ion assisted deposition

S. Koh, W. Choi, Hyung-Jin Jung, 1996 .

Effects of surface modification by Ar+ irradiation on wettability of surfaces of poly(ethylene terephthalate) films

S. Koh, Sung-Chul Park, K. Pae, 1998 .

New Pretreatment Method of Sapphire for GaN Deposition

S. Koh, W. Choi, D. Byun, 1999 .

Initial growth characterization of Au thin films on SnOx substrate by in situ conductivity measurement

D. Y. Lee, S. Koh, H. Baik, 2004 .

Crystalline Structure and Composition of Tin Oxide Film Grown by Reactive Ion Assisted Deposition as a Function of Average Diradiating Energy

S. Koh, W. Choi, J. Cho, 1995 .

Deposition of indium tin oxide films on polycarbonate substrates by using ion beam processes

S. Koh, K. Yoon, J. Cho, 2003 .

Material properties of indium oxide films prepared by oxygen ion assisted deposition

S. Koh, K. Yoon, J. Cho, 2001 .

Low-temperature growth of SnOx thin films using reactive ion-assisted deposition

S. Koh, K. Yoon, W. Choi, 1997 .

Effect of Ion Energy on Structural and Chemical Properties of Tin Oxide Film in Reactive Ion-Assisted Deposition (R-Iad)

Y. Yoon, S. Koh, K. Yoon, 1997 .

Improvement of adhesion between polyaniline and ion‐assisted‐reaction‐treated polypropylene

J. Joo, S. Koh, Y. Beag, 2003 .

Surface modification of polyimide and polysulfone membranes by ion beam for gas separation

S. Koh, Y. Kang, J. Won, 2000 .

Surface modification of α-Al2O3(0001) by N2+ ion irradiation

S. Koh, W. Choi, D. Byun, 1998 .

Influence of seed layers on microstructure and electrical properties of indium-tin oxide films

S. Koh, J. Cho, Dong-Ho Kim, 2003 .

Large-Scale Plasma Polymer Coating on Heat Exchanger Fins for Improving the Wettability

S. Koh, Ki-hwan Kim, S. Ha, 2003 .

Surface modification of polymer by ion assisted reaction in reactive gases environment

S. Koh, W. Choi, Hyung-Jin Jung, 1996 .

Surface chemical reaction between polycarbonate and kilo‐electron‐volt energy Ar+ ion in oxygen environment

S. Koh, W. Choi, Hyung-Jin Jung, 1996 .

Improving wettability of polycarbonate and adhesion with aluminum by Ar^+ ion irradiation

S. Koh, W. Choi, Hyung-Jin Jung, 1995 .

Effect of residual gas on Cu film deposition by partially ionized beam

S. Koh, Ki-hwan Kim, D. Choi, 1995 .

Enhancing adhesion by ion beam-induced atomic mixing at the interface between copper film and polyimide substrate

N. G. Stoffel, D. L. Hart, S. Koh, 1990 .

Surface modification of polytetrafluoroethylene by Ar+ irradiation for improved adhesion to other materials

S. Koh, W. Choi, Sung-Chul Park, 1997 .

Ar^+ ion irradiation in oxygen environment for improving wettability of polymethylmethacrylate

S. Koh, W. Choi, J. Cho, 1996 .

Cu films deposited by a partially ionized beam (PIB)

S. Koh, W. Choi, Ki-hwan Kim, 1996 .

Oxidation process from SnO to SnO2

S. Koh, W. Choi, K. Kim, 1997 .

Improving Adhesion of Polytetrafluoroethylene to Aluminum, Copper, and an Adhesive by Ar+ Irradiation with and without Oxygen Environment

S. Koh, Sung-Chul Park, K. Pae, 1995 .

X-ray photoelectron spectroscopy studies of modified surfaces of α-Al2O3, SiO2, and Si3N4 by low energy reactive ion beam irradiation

S. Koh, W. Choi, Hyung-Jin Jung, 1999 .

HDPE Surface Functionalization by Low-Energy Ion-Beam Irradiation under a Reactive O2 Environment and Its Effect on the HDPE/Nylon 66 Blend

S. Koh, Y. Seo, S. Kwak, 2001 .

Hydrophilic surface formation on materials and its applications

S. Koh, Sung Han, J. Cho, 2000 .

Altering a polymer surface chemical structure by an ion-assisted reaction

S. Koh, K. Kim, J. Cho, 2002 .

Hydrophilic group formation and cell culturing on polystyrene Petri-dish modified by ion-assisted reaction

S. Koh, J. Cho, Ki-hwan Kim, 2001 .

Effects of Cu seeding layer on Si grown by partially ionized beam in plasma enhanced chemical vapor deposition

Y. Cho, G. Choi, S. Koh, 1999 .

Metal Nano Particles Formation on Rotating Powder (NPP) Substrate in Physical Vapor Deposition

H. Kaji, S. Koh, B. Kang, 2015 .

Design and tests of the new partially ionized beam source

S. G. Kondranine, S. Koh, W. Choi, 1996 .

Microstructure and Electrical Properties of Indium Oxide Thin Films Prepared by Direct Oxygen Ion‐Assisted Deposition

S. Koh, K. Yoon, J. Cho, 2000 .

The characterization of undoped SnOx thin film grown by reactive ion-assisted deposition

S. Koh, K. Yoon, W. Choi, 1997 .

An approach to durable PVDF cantilevers with highly conducting PEDOT/PSS (DMSO) electrodes

J. Joo, S. Koh, Sung Han, 2005 .

Room-temperature growth of Cu thin films by nozzle-type partially ionized beam deposition with various acceleration voltages

S. Koh, Jeongyong Lee, Y. Yoon, 1996 .

Surface reaction on Polyvinylidenefluoride (PVDF) irradiated by low energy ion beam in reactive gas environment

S. Koh, K. Yoon, W. Choi, 1999 .

Uniform beam profiles of 5 cm convex gridded ion beam source

S. Koh, W. Choi, H. Jung, 1995 .

Characteristics of Cu thin films on a glass substrate by partially ionized beam deposition at room temperature

Y. Yoon, S. Koh, K. Kim, 1996 .

Modeling of electrical conductance variation in substrate during initial growth of ultra thin film

S. Koh, H. Baik, Hyung-Jin Jung, 1997 .

Microstructure of indium oxide films in oxygen ion-assisted deposition

S. Koh, K. Yoon, J. Cho, 2000 .

Cu films by partially ionized beam deposition for ultra large scale integration metallization

S. Koh, Sung Han, Ki-hwan Kim, 1998 .

Cu Films on Si(100) by Partially Ionized Beam Deposition

S. Koh, Sung Han, Ki-hwan Kim, 1996 .

Hydrophilic group formation on hydrocarbon polypropylene and polystyrene by ion-assisted reaction in an O2 environment

S. Han, S. Koh, W. Choi, 1999 .

Ultraflat indium tin oxide films prepared by ion beam sputtering

S. Koh, J. Cho, Dong-Ho Kim, 2005 .

Hydrophilic surface formation on polymers by ion-assisted reaction

S. Koh, Sung Han, J. Cho, 2003 .

Enhancing Adhesion of Pt/Poly(vinylidenefluoride) by a keV Ar+ Irradiation in an O2 Environment

S. Koh, K. Yoon, H. Jung, 1999 .

Low dielectric constant of MeV ion-implanted poly(vinylidene fluoride)

J. Joo, S. Koh, Sang-Yun Lee, 2003 .

Improving Wettability of PoIyMethylMetiiAcrylate by Ar+ ion Irradiation in Oxygen Environment

S. Koh, W. Choi, J. Cho, 1994 .

STRUCTURE AND GAS-SENSING CHARACTERISTICS OF UNDOPED TIN OXIDE THIN FILMS FABRICATED BY ION-ASSISTED DEPOSITION

S. Koh, W. Choi, H. Baik, 1998 .

H2 gas-sensing characteristics of SnOx sensors fabricated by a reactive ion-assisted deposition with/without an activator layer

D. Choi, S. Koh, W. Choi, 1997 .

Hydrophilic surface formation on polymers and its applications

S. Koh, J. Cho, Sang-Sup Yom, 2001 .

Induced Surface Reactions and Chemical States: A Kiloelectronvolt Ion Irradiation on Simple Linear Chain Structure Polymers in an O 2 Environment

S. Koh, K. Yoon, S. Han, 1999 .

Relation between hydrophilicity and cell culturing on polystyrene petri-dish modified by ion assisted reaction

S. Koh, Y. Yoo, W. Choi, 1999 .

Metallization of Cu on polytetrafluoroethylene modified by keV Ar+ ion irradiation

S. Koh, K. Yoon, W. Choi, 1998 .

Preparation and Characterization of Tin Oxide Films by Ion-Assisted Deposition

K. Yoon, S. Koh, W. Choi, 1996 .

Deposition of Cu Films for Laser Mirror by Partially Ionized Beam Deposition

Y. Yoon, S. Koh, Ki-hwan Kim, 1995 .

Characteristics of chemical-vapor-deposited copper on the Cu-seeded TiN substrates

S. Kim, S. Koh, K. Yoon, 1997 .

Chemical Vapor Deposition of Copper Films: Influence Of The Seeding Layers

S. Kim, S. Koh, K. Yoon, 1996 .

Prepreg Treatment with Ar+ Ion Irradiation to Improve GIcof Unidirectional Graphite/Epoxy Laminated Composites

N. Choi, K. Rhee, S. Koh, 2001 .

Surface Modification of Polytetrafluoroethylene by 1 keV Argon and Hydrogen Irradiated in Nitrogen and Ammonia Gas Environment

Joong-Soo Kim, S. Koh, Ki-hwan Kim, 2006 .

Enhanced adhesion between polycarbonate substrates and tin-doped indium oxide films by ion-assisted reaction

S. Koh, J. Cho, 2001 .

Permanent Hydrophilic Surface Formation by Ion Assisted Reaction

S. Koh, J. Cho, Ki-hwan Kim, 2003 .

Applications of TiO2 film for environmental purification deposited by controlled electron beam-excited plasma

A. Nishiwaki, S. Koh, Y. Ninomiya, 2001 .