D. Quesnel

发表

Residual stresses in high strength low alloy steel during low cycle fatigue

J. Cohen, D. Quesnel, M. Meshii, 1978 .

Photoelastic effects in Pb(Mg1/3Nb2/3)O3-29%PbTiO3 single crystals investigated by three-point bending technique

David J. Quesnel, D. Quesnel, N. Di, 2007 .

The adhesion of dry particles in the nanometer to micrometer-size range

A. Busnaina, D. Quesnel, D. Rimai, 2000 .

Investigation of Oxygen Evolution Reaction at LaRuO3, La3.5Ru4O13, and La2RuO5

J. Jorné, A. Manivannan, S. Narayanan, 2015 .

Effect of Etching and Imaging Mode on the Measurement of Subsurface Damage in Microground Optical Glasses

Donald Golini, David J. Quesnel, Paul D. Funkenbusch, 1994 .

Extensometer extender for conversion of room‐temperature extensometers for high‐temperature applications

David J. Quesnel, D. Quesnel, J. C. Tsou, 1983 .

Utilization of an Activated Sludge for the Improvement of an Existing Thermophilic Wastewater Treatment System

G. Nakhla, D. Quesnel, 2005 .

Aspects of Particle Adhesion and Removal

A. Harrison, D. Quesnel, S. Beaudoin, 2016 .

Molecular automation: a new kind of simulation applied to ionic solutions

D. Quesnel, Yingrui Zhang, 2012 .

Effect of native oxide layers on copper thin-film tensile properties: A reactive molecular dynamics study

Michael Skarlinski, D. Quesnel, 2015 .

The Influence of Fe Substitution in Lanthanum Calcium Cobalt Oxide on the Oxygen Evolution Reaction in Alkaline Media

A. Manivannan, D. Quesnel, C. Bridges, 2016 .

Removal kinetics of acetone and MIBK from a complex industrial wastewater by an acclimatized activated sludge.

G. Nakhla, D. Quesnel, 2006, Journal of hazardous materials.

Solution softening and hardening in the IronCarbon system

D. Quesnel, M. Meshii, A. Sato, 1975 .

The effect of loading rate on chevron notch fracture toughness measurements

E. I. Stromswold, D. Quesnel, 1994 .

Synthesis and electrochemical study of sodium ion transport polymer gel electrolytes

D. Quesnel, Yuan Xue, 2016 .

Optimization of the aerobic biological treatment of thermophilically treated refractory wastewater.

G. Nakhla, D. Quesnel, 2005, Journal of hazardous materials.

Characterization and treatability of aerobic bacterial thermophilically treated wastewater by a conventional activated sludge and granular activated carbon.

G. Nakhla, D. Quesnel, 2005, Water research.

Electrophotography as a Means of Nanofabrication: The Role of Electrodynamic and Electrostatic Forces

D. Quesnel, D. S. Weiss, D. Rimai, 2005, NIP & Digital Fabrication Conference.

Effects of NaCl, pH, and Potential on the Static Creep Behavior of AA1100

D. Quesnel, Quanhe Wan, 2013, Metallurgical and Materials Transactions A.

An engineering tool for fracture toughness testing

E. I. Stromswold, D. Quesnel, 1992 .

Low cycle fatigue of aluminum at elevated temperatures

D. Quesnel, J. Tsou, 1983 .

The response of high-strength low alloy steel to cyclic plastic deformation

D. Quesnel, M. Meshii, 1977 .

Enhancement of the Stress Corrosion Sensitivity of AA5083 by Heat Treatment

D. Quesnel, Jie Gao, 2011 .

Behavior of β phase (Al3Mg2) in AA 5083 during friction stir welding

S. Jung, D. Quesnel, Byung-wook Ahn, 2013 .

A quantitative approach to the cell shuttling model

D. Quesnel, J. Tsou, 1983 .

A THEORY ON THE SHAPE OF SATURATED HYSTERESIS LOOPS

D. Quesnel, J. Tsou, 1981 .

Internal stress measurments during the saturation fatigue of polycrystalline aluminum

D. Quesnel, J. C. Tsou, D. J. Quesnel, 1982 .

Relaxation strain measurements in cellular dislocation structures

D. Quesnel, C. Tsai, 1984 .

Vacancy winds in cyclic deformation

D. Quesnel, R. Bush, 1983 .

A glide induced mechanism of dipole loop annihilation

D. Quesnel, J. Tsou, 1980 .

Mechanical Characterization of Blends of Polystyrene and Styrene-Butadiene-Styrene

D. Quesnel, V. Berko-Boateng, 1983 .

Solid state interfacial reaction and joint strength of Sn–37Pb solder with Ni–P under bump metallization in flip chip application

S. Jung, D. Quesnel, Jong-Woong Kim, 2005 .

Effect of solid-state intermetallic growth on the fracture toughness of Cu/63Sn-37Pb solder joints

David J. Quesnel, R. E. Pratt, E. I. Stromswold, 1996 .

Correlation between displacement rate and shear force in shear test of Sn–Pb and lead free solder joints

D. Quesnel, J. Joo, J. Kim, 2005 .

Mode I fracture toughness testing of eutectic Sn-Pb solder joints

David J. Quesnel, Ronald E. Pratt, R. E. Pratt, 1994 .

Capillary soldering system for the material property characterization of solder joints

R. E. Pratt, E. I. Stromswold, D. Quesnel, 1993 .

Friction welding of TiAl and AISI4140

J. Koo, S. Jung, D. Quesnel, 2004 .

Rate process analysis applied to the mechanical behavior of glassy bisphenol‐A‐polycarbonate

D. Quesnel, T. Mattioli, 1987 .

Effect of Young's Modulus on the Detachment Force of 7 μm Particles

D. Quesnel, D. Rimai, M. Dejesus, 2006 .

Photoelastic effects in Pb(Mg1/3Nb2/3)O3−29%PbTiO3 single crystals investigated by Hertzian contact experiments

D. Quesnel, N. Di, Jo Harker, 2008 .

Molecular Dynamic Simulation of Adhesional Release of Particles from Surfaces

David J. Quesnel, Donald S. Rimai, D. Quesnel, 1998 .

Electrophotographic printing on textiles and non-planar substrates

D. Quesnel, D. Rimai, D. S. Rimai, 2004 .

The Adhesion of Irregularly-shaped 8 μm Diameter Particles to Substrates: The Contributions of Electrostatic and van der Waals Interactions

D. Quesnel, D. Rimai, R. Reifenberger, 2000 .

Application of coolants in deterministic microgrinding of glass

Birgit E. Gillman, Stephen D. Jacobs, Jeffrey L. Ruckman, 1997, Optics & Photonics.

Growth of equilibrium clusters of Lennard-Jones molecules

A. C. Reardon, D. Quesnel, 1989 .

The Poisson ratio for an FCC Lennard-Jones solid

D. Quesnel, D. Rimai, L. Demejo, 1993 .

Chapter 3 – Particle adhesion

D. Quesnel, D. Rimai, 2002 .

Friability and crushing strength of micrometer-size diamond abrasives used in microgrinding of optical glass

Yiyang Zhou, D. Quesnel, P. Funkenbusch, 1996 .

Particle adhesion: interaction forces and mechanical effects: extrapolation to the nanometer-size range

A. Busnaina, D. Quesnel, D. Rimai, 1997 .

The destabilizing influence of plastic yielding on fracture

D. Quesnel, R. Bush, 1989 .

Molecular dynamic modeling of particle adhesion

David J. Quesnel, D. Quesnel, D. Rimai, 1995 .

Molecular dynamic modeling of interfacial energy

D. Quesnel, D. Rimai, L. Demejo, 1995 .

Effects of submicrometer particulate silica addenda on the adhesion of micrometer-size particles to a polyester-composite substrate

D. Quesnel, D. Rimai, P. Alexandrovich, 2003 .

Finite Element Modeling of Particle Adhesion: A Surface Energy Formalism

D. Quesnel, D. Rimai, 2000 .

Molecular statics of polymer configurations

D. Quesnel, L. Mazlout, 1988 .

Chemical lathe for the efficient preparation of high‐quality surfaces for low‐cycle fatigue

D. Quesnel, Henry T. Bober, 1980 .

Fracture surface interference effects in mode III

A. C. Reardon, D. Quesnel, 1995 .

Reply to L. P. Poor's discussion of “an engineering tool for fracture toughness testing” by E. I. Stromswold and D. J. Quesnel

E. I. Stromswold, D. Quesnel, 1993 .

Particle adhesion and removal in electrophotography

David J. Quesnel, Donald S. Rimai, D. Quesnel, 2003 .