Mingchun Zhao

发表

Continuous cooling transformation of undeformed and deformed low carbon pipeline steels

Ke Yang, Ming-Chun Zhao, Mingchun Zhao, 2003 .

An exploratory study of the corrosion of Mg alloys during interrupted salt spray testing

G. Song, Mingchun Zhao, P. Schmutz, 2009 .

Influence of the β-phase morphology on the corrosion of the Mg alloy AZ91

M. Liu, G. Song, Mingchun Zhao, 2008 .

Formation and characteristic corrosion behavior of alternately lamellar arranged α and β in as-cast AZ91 Mg alloy

C. Shuai, Chengde Gao, Mingchun Zhao, 2019, Journal of Alloys and Compounds.

Effect of grain refinement and crystallographic texture produced by friction stir processing on the biodegradation behavior of a Mg-Nd-Zn alloy

C. Shuai, Mingchun Zhao, Ke Yang, 2019, Journal of Materials Science & Technology.

Improved biodegradation resistance by grain refinement of novel antibacterial ZK30-Cu alloys produced via selective laser melting

C. Shuai, Chengde Gao, Mingchun Zhao, 2019, Materials Letters.

Microstructure, biodegradation, antibacterial and mechanical properties of ZK60-Cu alloys prepared by selective laser melting technique

C. Shuai, Chengde Gao, You-wen Yang, 2018, Journal of Materials Science & Technology.

Strength and toughness tradeoffs for an ultrafine-grain size ferrite/cementite steel produced by warm-rolling and annealing

Mingchun Zhao, Xiaoxia Huang, A. Atrens, 2011 .

Rare Earth Element Yttrium Modified Mg-Al-Zn Alloy: Microstructure, Degradation Properties and Hardness

C. Shuai, Chengde Gao, You-wen Yang, 2017, Materials.

Influence of Microstructure on Corrosion of As‐cast ZE41

G. Song, Mingchun Zhao, A. Atrens, 2008 .

Influence of pH and chloride ion concentration on the corrosion of Mg alloy ZE41

M. Liu, G. Song, Mingchun Zhao, 2008 .

Role of microstructure on sulfide stress cracking of oil and gas pipeline steels

Mingchun Zhao, Ke Yang, Y. Shan, 2003 .

Designing a high Si reduced activation ferritic/martensitic steel for nuclear power generation by using Calphad method

Wei Yan, Mingchun Zhao, Ke Yang, 2019, Journal of Materials Science & Technology.

Grain growth and Hall–Petch relation in dual-sized ferrite/cementite steel with nano-sized cementite particles in a heterogeneous and dense distribution

T. Hanamura, Mingchun Zhao, Ke Yang, 2006 .

Role of second phase cementite and martensite particles on strength and strain hardening in a plain C-Mn steel

Mingchun Zhao, Xiaoxia Huang, A. Atrens, 2012 .

Identification of the effective grain size responsible for the ductile to brittle transition temperature for steel with an ultrafine grain size ferrite/cementite microstructure with a bimodal ferrite grain size distribution

Mingchun Zhao, A. Atrens, Ying Zhao, 2011 .

Study on a Novel Biodegradable and Antibacterial Fe-Based Alloy Prepared by Microwave Sintering

Mingchun Zhao, B. Ma, A. Atrens, 2021, Materials.

Corrosion and antibacterial performance of novel selective-laser-melted (SLMed) Ti-xCu biomedical alloys

C. Shuai, Chengde Gao, Mingchun Zhao, 2021 .

Effect of Alloying Mn by Selective Laser Melting on the Microstructure and Biodegradation Properties of Pure Mg

C. Shuai, Chengde Gao, Mingchun Zhao, 2020, Metals.

Graphene Oxide Reinforced Iron Matrix Composite With Enhanced Biodegradation Rate Prepared by Selective Laser Melting

C. Shuai, Chengde Gao, Mingchun Zhao, 2019, Advanced Engineering Materials.

Evolution of microstructure and texture for an Al-0.4 Er alloy during accumulative roll bonding

Zhiming Yu, Mingchun Zhao, A. Atrens, 2019, Journal of Alloys and Compounds.

Relationship between Biodegradation Rate and Grain Size Itself Excluding Other Structural Factors Caused by Alloying Additions and Deformation Processing for Pure Mg

R. Tao, Mingchun Zhao, Youming Deng, 2022, Materials.