P. Palani

发表

Selection of parameters of pulsed current gas metal arc welding

N. Murugan, P. K. Palani, P. Palani, 2006 .

Modelling and analysis of delta ferrite content in claddings deposited by flux cored arc welding using a neural network

P. Palani, N. Murugan, 2009 .

Exergy Analysis of R1234yf and R1234ze as an Alternative to R134a in a Domestic Refrigeration System

P. Palani, Guna Muthuvairavan, S. Soma Sundaram, 2021, Recent Advances in Manufacturing, Automation, Design and Energy Technologies.

Prediction of Delta Ferrite Content and Effect of Welding Process Parameters in Claddings by FCAW

P. Palani, N. Murugan, 2006 .

Parametric optimization for improving impact strength of squeeze cast of hybrid metal matrix (LM24–SiCp–coconut shell ash) composite

P. Palani, M. Arulraj, 2017 .

Modelling and analysis of pitting corrosion resistance of stainless steel overlays deposited by flux cored arc welding process

P. Palani, N. Murugan, 2008 .

Ferrite number optimisation for stainless steel cladding by FCAW using Taguchi technique

P. Palani, N. Murugan, 2008 .

Surface integrity, fatigue performance and dry sliding wear behaviour of Si3N4–TiN after wire-electro discharge machining

P. Palani, V. Srinivasan, 2020, Ceramics International.

Development of mathematical models for prediction of weld bead geometry in cladding by flux cored arc welding

N. Murugan, P. K. Palani, P. Palani, 2006 .

Modelling and Analysis of Tool Wear on a Cryogenically Treated CNMG120408SMRH13A Insert in the Turning of AISI4340 Steel Using Response Surface Methodology

P. Palani, Ramesh Chidambaram, 2017 .

Optimization of Particle Size of Teak Wood Saw Powder Using Taguchi Method

P. Palani, B. Rajeswari, K. Chithambaram, 2021, Lecture Notes in Mechanical Engineering.

Modeling and simulation of wire feed rate for steady current and pulsed current gas metal arc welding using 317L flux cored wire

N. Murugan, P. K. Palani, P. Palani, 2007 .

A Multi Criteria Decision Making (MCDM) based on TOPSIS and RSM for process improvement in electrical discharge machining of silicon nitride–titanium nitride ceramic composites

P. Palani, S. Balamurugan, S. Gopi, 2020 .

Process parameter selection for optimising weld bead geometry in stainless steel cladding using Taguchi's approach

N. Murugan, B. Karthikeyan, P. K. Palani, 2006 .

Optimization of weld bead geometry for stainless steel claddings deposited by FCAW

N. Murugan, P. K. Palani, P. Palani, 2007 .

Experimental investigation on electrical discharge machining of ceramic composites (Si3N4-TiN) using RSM

P. Palani, L. Selvarajan, V. Srinivasan, 2018 .

Sensitivity Analysis for Process Parameters in Cladding of Stainless Steel by Flux Cored Arc Welding

N. Murugan, P. K. Palani, P. Palani, 2006 .

Novel Packaging Approach for Thick Film Based Gas Sensors and Associated Aspects

A. V. Nirmal, P. Palani, Kamaljeet Singh, 2021, IEEE International Conference on Electronics, Computing and Communication Technologies.

Experimental investigation on EDM of Si3N4–TiN using grey relational analysis coupled with teaching-learning-based optimization algorithm

P. Palani, S. Balamurugan, V. Srinivasan, 2021, Ceramics International.

Enhancing wear resistance of squeeze cast hybrid aluminium matrix (LM24-SiCp-coconut shell ash) composite

P. Palani, M. Sowrirajan, M. Arulraj, 2019, International Journal of Computational Materials Science and Surface Engineering.