H. Tung

发表

Hardness and residual stress in nanocrystalline ZrN films: Effect of bias voltage and heat treatment

H. Tung, Jia-Hong Huang, D. Tsai, 2009 .

Incipient oxidation kinetics of alloy 617 and residual stress of the oxide scale formed in air at temperatures between 850 and 1000 °C

H. Tung, J. Stubbins, 2012 .

Biaxial Thermal Creep of Alloy 617 and Alloy 230 for VHTR Applications

W. Lv, H. Tung, D. Yun, 2014 .

In-Situ Synchrotron X-Ray Study of the Elevated Temperature Deformation Response of SS 316L Pressurized Creep Tubes

J. Almer, H. Tung, D. Yun, 2015 .

Microstructures, mechanical properties and oxidation behavior of vacuum annealed TiZrN thin films

H. Tung, Jia-Hong Huang, Po‐Hsien Wu, 2015 .

Incipient oxidation kinetics and residual stress of the oxide scale grown on Haynes 230 at high temperatures

H. Tung, J. Stubbins, 2012 .

Mechanism of plastic deformation of a Ni-based superalloy for VHTR applications

H. Tung, J. Stubbins, K. Mo, 2010 .

Synchrotron Radiation Study on Alloy 617 and Alloy 230 for VHTR Application

J. Almer, H. Tung, Meimei Li, 2013 .

Biaxial creep performance of CWSR Zircaloy-4 cladding at emulated off-normal conditions of interim dry storage facility

H. Tung, J. Stubbins, Y. Miao, 2018, Materials Science and Engineering: A.

Incipient corrosion behavior of Haynes 230 under a controlled reducing atmosphere at high temperatures

H. Tung, J. Stubbins, 2012 .

Effect of orientation on plastic deformations of Alloy 617 for VHTR applications

H. Tung, J. Stubbins, K. Mo, 2013 .

High Temperature Aging and Corrosion Study on Alloy 617 and Alloy 230

H. Tung, J. Stubbins, K. Mo, 2011 .

Biaxial thermal creep of Inconel 617 and Haynes 230 at 850 and 950 °C

H. Tung, J. Stubbins, K. Mo, 2014 .

Effects of hydrogen contents on the mechanical properties of Zircaloy-4 sheets

H. Tung, Tai-Cheng Chen, C. Tseng, 2016 .

A Study on texture stability and the biaxial creep behavior of as-hydrided CWSR Zircaloy-4 cladding at the effective stresses from 55 MPa to 65 MPa and temperatures from 300°C to 400°C

J. Almer, H. Tung, Jun-Sang Park, 2022, Journal of Nuclear Materials.

Synchrotron study on load partitioning between ferrite/martensite and nanoparticles of a 9Cr ODS steel

Guangming Zhang, Jonathan Almer, Di Yun, 2014 .

Strain-Rate Sensitivity Analysis for Ni Alloys to Be Used in Very High Temperature Reactors

H. Tung, J. Stubbins, K. Mo, 2013 .

In-plane anisotropy in microstructure and mechanical behavior of Alloy 617 following high temperature aging

H. Tung, J. Stubbins, K. Mo, 2010 .

Effects of Sintering Temperature on the Porosity and Mechanical Behavior of Porous Titanium Scaffolds Prepared by Freeze-Casting

H. Tung, Guanxi Liu, Joe-Ming Chang, 2019, Journal of Materials Engineering and Performance.