H. Murakawa

发表

Influence of Root Gap and Tack Weld on Transverse Shrinkage during Welding

H. Murakawa, M. Sano, Jiangchao Wang, 2012 .

Finite Element Analysis Using Interface Element for Predicting Deformation during Butt Welding Considering Root Gap and Tack Welds(Mechanics, Strength & Structure Design)

H. Murakawa, M. Shibahara, H. Serizawa, 2002 .

Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements

Hidekazu Murakawa, Dean Deng, D. Deng, 2006 .

Numerical and experimental investigations on welding residual stress in multi-pass butt-welded austenitic stainless steel pipe

Hidekazu Murakawa, Dean Deng, D. Deng, 2008 .

Finite element analysis using interface element for predicting deformation during butt welding considering root gap and tack welds

H. Murakawa, M. Shibahara, H. Serizawa, 2002 .

Determination of welding deformation in fillet-welded joint by means of numerical simulation and comparison with experimental measurements

Hidekazu Murakawa, Dean Deng, D. Deng, 2007 .

Investigation of welding residual stress distribution in a thick-plate joint with an emphasis on the features near weld end-start

Hidekazu Murakawa, Dean Deng, D. Deng, 2015 .

Prediction of welding distortion and residual stress in a thin plate butt-welded joint

D. Deng, H. Murakawa, 2008 .

Finite Elasticity Solutions Using Hybrid Finite Elements Based on a Complementary Energy Principle—Part 2: Incompressible Materials

S. Atluri, H. Murakawa, 1979 .

Numerical and Experimental Study on Nugget Formation in Resistance Spot Welding for High Strength Steel Sheets in Automobile Bodies

H. Murakawa, N. Ma, 2009 .

Weldability analysis of spot welding on aluminum using FEM

Yukio Ueda, 英一村川, Hidekazu Murakawa, 1995 .

Fractal Multi-Grid Method for Ultra Large Scale Mechanical and Thermal Simulations

Hisashi Serizawa, Hidekazu Murakawa, H. Murakawa, 2005 .

Numerical analysis of the competitive influence of Marangoni flow and evaporation on heat surface temperature and molten pool shape in laser surface remelting

Hidekazu Murakawa, Yongping Lei, Yaowu Shi, 2001 .

Toward large-scale simulation of residual stress and distortion in wire and arc additive manufacturing

Zhili Feng, H. Murakawa, N. Ma, 2020 .

Welding distortion investigation in fillet welded joint and structure based on iterative substructure method

Jianxun Zhang, H. Murakawa, H. Serizawa, 2009 .

Numerical Analysis of the Straightening Process of Thin Plate Structures by Elastic FEM based on the Inherent Strain Method

Hisashi Serizawa, Juan Blandon, Adan Vega, 2012 .

Investigation of Buckling Deformation of Thin Plate Welded Structures

Hidekazu Murakawa, Masakazu Shibahara, Jiangchao Wang, 2011 .

FE Analysis of Buckling Behavior Caused by Welding in Thin Plates of High Tensile Strength Steel

H. Murakawa, Jiangchao Wang, S. Rashed, 2014, Journal of Materials Engineering and Performance.

Measurement of residual stress in arc welded lap joints by cosα X-ray diffraction method

Ninshu Ma, Hidekazu Murakawa, Yongping Lei, 2017 .

FEM simulation of welding distortion in thin curved structures during assembly considering gap and misalignment

D. Deng, H. Murakawa, H. Serizawa, 2002 .

Simulation of Welding Residual Stress and Distortion: -Coordination and Cooperation for Innovation-@@@－革新のための協調と連携－

H. Murakawa, 2017 .

Development of Computer Aided Process Planning System for Plate Bending by Line-Heating (Report II) : Practice for Plate Bending in Shipyard Viewed from Aspect of Inherent Strain(Mechanics, Strength & Structural Design)

Yukio Ueda, Yukio Ueda, Yasuhisa Okumoto, 1992 .

Prediction of Deformation for Large Welded Structures Based on Inherent Strain(Mechanics, Strength & Structural Design)

Hidekazu Murakawa, Dean Deng, Lei Xie, 2004 .

Mechanical Study on the Effect of the Initial Gap upon the Weldability of Spot Weld Joint(Physics, Process, Instrument & Measurement)

Yukio Ueda, Hidekazu Murakawa, H. Murakawa, 1989 .

Measurement of Three Dimensional Residual Stresses in Rolled Clad Plates and Welded Joints of a Chemical Tank Structure

D. Deng, H. Murakawa, Yuejian Luo, 2009 .

Establishment of Computational Welding Mechanics(Mechanics, Strength & Structural Design)

Yukio Ueda, Hidekazu Murakawa, Keiji Nakacho, 1995 .

Three Dimensional Numerical Simulation of Various Thermo-mechanical Processes by FEM (Report III) : Deformation Analysis of Compressors under Assembly by Plug Welding(Mechanics, Strength & Structural Design)

Yukio Ueda, Hidekazu Murakawa, Jianhua Wang, 1993 .

Development of Computer Aided Process Planning System for Plate Bending by Line Heating (Report I) : Relation between the Final Form of Plate and the Inherent Strain(Machanics, Strength & Structural Design)

Yukio Ueda, Yukio Ueda, Yasuhisa Okumoto, 1991 .

Basic numerical analysis of friction stir welding with a combination of MPS and FEM

H. Murakawa, H. Serizawa, F. Miyasaka, 2013 .

A Model to Estimate the Ductile Crack Growth in Metallic Materials with Node Release Technique Using Potential(Mechanics, Strength & Structure Design)

Jianxun Zhang, H. Murakawa, 2000 .

Effects of specimen size and stress ratio on fatigue crack growth after a single tensile overload

H. Murakawa, M. Shibahara, R. Gadallah, 2022, Ocean Engineering.

Numerical investigation on the effect of thickness and stress level on fatigue crack growth in notched specimens

S. Tsutsumi, H. Murakawa, M. Shibahara, 2021, Theoretical and Applied Fracture Mechanics.

Simulation of Fatigue Crack Growth in Weld Joint of Thin Structures Using Characteristic Tensor

H. Murakawa, 2018, Journal of Physics: Conference Series.

The study on ductile fracture of the over-matched weldment with mechanical heterogeneity

Y. Shi, H. Murakawa, J. Zhang, 1998 .

Validation of the Contour Method Considering the In-plane Displacements at the Cut Surface

H. Murakawa, R. Gadallah, 2014 .

Theoretical Prediction of Thermal Cycles and Hardness of HAZ due to Twin Wire Submerged Arc Welding

H. Murakawa, N. Ma, Xueli Xu, 2013 .

Determination of local constitutive behavior and simulation on tensile test of 2219-T87 aluminum alloy GTAW joints

Guoqing Wang, H. Murakawa, D. Yan, 2015 .

Investigation of Interface Layer Failure and Shear Strength of CMT Brazed Lap Joints in Dissimilar Materials

Y. Lei, Jian Lin, H. Murakawa, 2011 .

Prediction of welding residual stress in multi-pass butt-welded modified 9Cr–1Mo steel pipe considering phase transformation effects

Hidekazu Murakawa, Dean Deng, D. Deng, 2006 .

Finite element analysis on relationships between the J-integral and CTOD for stationary cracks in welded tensile specimens

Yukio Ueda, Hidekazu Murakawa, Yaowu Shi, 1998 .

Iterative substructure method employing concept of inherent strain for large-scale welding problems

Hui Huang, Ninshu Ma, Hidekazu Murakawa, 2014, Welding in the World.

Influence of transformation induced plasticity on simulated results of welding residual stress in low temperature transformation steel

Hidekazu Murakawa, Dean Deng, D. Deng, 2013 .

Effect of low transformation temperature weld filler metal on welding residual stress

K. Nikbin, K. Nikbin, D. Dye, 2010 .

Finite Element Simulation of Seam Welding Process(Mechanics, Strength & Structure Design)

Toshihito Kato, Hidekazu Murakawa, Hiroyuki Minami, 2001 .

Elongated bead weld method for improvement of fatigue properties in welded joints of ship hull structures using low transformation temperature welding materials

S. Tsutsumi, H. Murakawa, C. Shiga, 2017, Welding in the World.

Effect of Crack Depth and Strength Mis-Matching on the Relation between J-integral and CTOD for Welded Tensile Specimens(Mechanics, Strength & Structure Design)

Yaowu Shi, H. Murakawa, Y. Ueda, 1997 .

Basic analysis of microstructural fracture behavior in structural materials by using FEM with interface element

H. Murakawa, H. Serizawa, Seigo Tomiyama, 2011 .

Computational Analysis of Crack Growth in Composite Materials Using Lennard‐Jones Type Potential Function

H. Murakawa, H. Serizawa, Z. Q. Wu, 2008 .

Numerical Analysis of Mechanical Test Methods for Evaluating Shear Strength of Joint by Using Interface Element

C. Lewinsohn, H. Murakawa, H. Serizawa, 2007 .

Effect of Specimen Geometry on Microstructural Fracture Behavior in Nano Composites under HVEM

H. Murakawa, H. Serizawa, T. Shibayama, 2014 .

Numerical Analysis of Microstructural Fracture Behavior in Nano Composites under HVEM

H. Murakawa, H. Serizawa, T. Shibayama, 2013 .

Development of Numerical Tool for Analysis of Microstructural Fracture Behavior in Smart & Intelligent Materials

H. Murakawa, H. Serizawa, Seigo Tomiyama, 2012 .

Evaluation of Fracture Behavior of Ceramic Composite Joints by Using a New Interface Potential

C. Lewinsohn, H. Murakawa, H. Serizawa, 2005 .

Numerical Analysis of Fracture Behavior in Anisotropic Microstructures

H. Murakawa, H. Serizawa, Seigo Tomiyama, 2012 .

Preliminary numerical research of microstructural fracture behavior in metal by using interface element

H. Murakawa, H. Serizawa, Seigo Tomiyama, 2010 .

Modeling of Fracture Strength of SiC/SiC Composite Joints by Using Interface Elements

C. Lewinsohn, H. Murakawa, H. Serizawa, 2012 .

Development of Numerical Method for Evaluating Microstructural Fracture in Smart Materials

H. Murakawa, H. Serizawa, Seigo Tomiyama, 2011 .

Finite Element Analysis of Single Lap Joined Ceramic Composites by Using An Interface Element

H. Murakawa, H. Serizawa, M. Singh, 2006 .

Microstructural Characteristics and Mechanical Properties of Friction Stir Welded Thick 5083 Aluminum Alloy

S. Tsutsumi, H. Murakawa, Yufeng Sun, 2016, Metallurgical and Materials Transactions A.

Effect of Phase Transformation onset Temperature on Residual Stress in Welded Thin Steel Plates

K. Nikbin, M. Béreš, D. Dye, 2008 .

Numerical Simulation of Fracture Behavior of Ceramic Composite Joints By Using A Combined Interface Potential(Mechanics, Strength & Structure Design)

C. Lewinsohn, H. Murakawa, H. Serizawa, 2004 .

Mechanism and Effect of Stress-induced Transformation on Improvement of Fracture Toughness

H. Murakawa, H. Serizawa, Seigo Tomiyama, 2009 .

Finite Element Analysis of Mechanical Test Methods for Evaluating Shear Strength of Ceramic Composite Joints Using Interface Element

C. Lewinsohn, H. Murakawa, H. Serizawa, 2008 .

FINITE ELEMENT ANALYSIS OF SiC/SiC COMPOSITE JOINTS BY USING A NEW INTERFACE POTENTIAL

C. Lewinsohn, H. Murakawa, H. Serizawa, 2005 .

Martensite transformation of a Cr-Ni type weld metal and its application to analysis of welded joints

H. Murakawa, T. Kakeshita, R. Hamamura, 2014, Welding in the World.

Compressive Residual Stress in Welded Joints with Low-Temperature-Transformation Weld Metal in High-Strength Steel

H. Murakawa, C. Shiga, K. Hiraoka, 2014 .

New LTT Welding Material and All-Position Repair Welding with Elongated Bead for Super-Long Fatigue Life of Boxing Fillet Joints

H. Murakawa, C. Shiga, K. Hiraoka, 2020 .

Mechanism investigation of welding induced buckling using inherent deformation method

Hidekazu Murakawa, Jiangchao Wang, Sherif Rashed, 2014 .

Deformation characteristics and microstructural evolution in friction stir welding of thick 5083 aluminum alloy

S. Tsutsumi, H. Murakawa, Yufeng Sun, 2018, The International Journal of Advanced Manufacturing Technology.

Numerical study of local PWHT condition for EB welded joint between first and side walls in ITER-TBM

H. Murakawa, H. Serizawa, H. Tanigawa, 2013 .

Theoretical prediction of residual stress in welded structures

H. Murakawa, 1997 .

High performance computation of residual stress and distortion in laser welded 301L stainless sheets

Liqun Li, S. Tsutsumi, H. Murakawa, 2017 .

Finite element analysis of temperature field, microstructure and residual stress in multi-pass butt-welded 2.25Cr–1Mo steel pipes

Hidekazu Murakawa, Dean Deng, D. Deng, 2008 .

Molecular dynamics simulation of graphene sheets joining under ion beam irradiation

M. Tsukamoto, M. Zhong, Haiyan Zhao, 2014 .

The Formation of Molecular Junctions between Graphene Sheets

M. Tsukamoto, M. Zhong, Haiyan Zhao, 2013 .

Numerical investigation of formation mechanism of welding residual stress in P92 steel multi-pass joints

D. Deng, H. Murakawa, Suo Li, 2017 .

FEM Simulation of Welding Residual Stress in Multi-pass Butt-welded Modified 9Cr-1Mo Steel Pipe Considering Phase Transformation Effects(Mechanics, Strength & Structure Design)

D. Deng, H. Murakawa, Y. Horii, 2004 .

Predicting Welding Residual Stress Distributions in P92 Steel Joints Considering the Influence of Solid-State Phase Transformation

D. Deng, H. Murakawa, 2016 .

Investigations on welding distortion in an asymmetrical curved block by means of numerical simulation technology and experimental method

Hidekazu Murakawa, Masakazu Shibahara, Dean Deng, 2010 .

Residual stress and distortion in laser welding

H. Murakawa, 2013 .

Influence of thermo-mechanical material properties of different steel grades on welding residual stresses and angular distortion

Hidekazu Murakawa, Zuheir Barsoum, Imad Barsoum, 2015 .

Numerical prediction and mitigation of out-of-plane welding distortion in ship panel structure by elastic FE analysis

Jiangchao Wang, Hidekazu Murakawa, Sherif Rashed, 2013 .

Investigation on twisting distortion of thin plate stiffened structure under welding

Zhang Xudong, Hidekazu Murakawa, Masakazu Shibahara, 2012 .

Numerical simulation of welding distortion in large structures

Wei Liang, Dean Deng, Hidekazu Murakawa, 2007 .

Prediction of Welding Distortion by Elastic Finite Element Analysis using Inherent Deformation Estimated Through Inverse Analysis

S. Sone, H. Murakawa, D. Deng, 2005 .

An efficient FE computation for predicting welding induced buckling in production of ship panel structure

Jiangchao Wang, Ninshu Ma, Hidekazu Murakawa, 2015 .

Experimental and computational analysis of residual buckling distortion of bead-on-plate welded joint

Hidekazu Murakawa, Jiangchao Wang, H. Murakawa, 2013 .

Applications of inherent strain and interface element to simulation of welding deformation in thin plate structures

Ninshu Ma, Hidekazu Murakawa, Jiangchao Wang, 2012 .

Estimating inherent deformation in thin-plate Al-alloy joint by means of inverse analysis with the help of cutting technique

Wei Liang, Hidekazu Murakawa, Dean Deng, 2016, Adv. Eng. Softw..

Prediction of welding distortion in a curved plate structure by means of elastic finite element method

Hidekazu Murakawa, Dean Deng, D. Deng, 2008 .

Prediction of Welding Deformation and Residual Stress by Elastic FEM Based on Inherent Strain (Report I) : Mechanism of Inherent Strain Production(Mechanics, Strength & Structure Design)

Yukio Ueda, 英一村川, Hidekazu Murakawa, 1997 .

Finite Element Method for Hot Cracking Using Temperature Dependent Interface Element (Report II)

H. Murakawa, M. Shibahara, H. Serizawa, 2000 .

Experimental and numerical investigation on generation characteristics of welding deformation in compressor impeller

M. Mochizuki, H. Murakawa, Akiyoshi Ando, 2016 .

Investigation of thickness and welding residual stress effects on fatigue crack growth

H. Murakawa, M. Shibahara, R. Gadallah, 2023, Journal of Constructional Steel Research.

Actual application of FEM to analysis of large scale mechanical problems in welding

Hisashi Serizawa, Hidekazu Murakawa, H. Murakawa, 2007 .

Prediction and measurement of welding distortion of a spherical structure assembled from multi thin plates

Ninshu Ma, Hidekazu Murakawa, Shijian Yuan, 2011 .

New General and Complementary Energy Theorems, Finite Strain, Rate Sensitive Inelasticity and Finite Elements: Some Computational Studies

S. Atluri, H. Murakawa, 1981 .

Effect of Various Factors on Interface Formation in Magnetic Pressure Seam Welding

H. Murakawa, H. Serizawa, S. Kumai, 2010 .

Prediction of Distortion Produced on Welded Structures during Assembly Using Inherent Deformation and Interface Element

Shinji Sato, Hidekazu Murakawa, Sherif Rashed, 2009 .

Numerical Study of Joining Process in Magnetic Pressure Seam Welding

Hisashi Serizawa, Hidekazu Murakawa, Sherif Rashed, 2009 .

Investigation of welding residual stress in flash-butt joint of U71Mn rail steel by numerical simulation and experiment

Jiluan Pan, Hui Huang, Ninshu Ma, 2015 .

Recent research on welding distortion prediction in thin plate fabrication by means of elastic FE computation

Ninshu Ma, Hidekazu Murakawa, Jiangchao Wang, 2016 .

Prediction of residual stresses induced by low transformation temperature weld wires and its validation using the contour method

Hidekazu Murakawa, Ramy Gadallah, Seiichiro Tsutsumi, 2015 .

Numerical simulation for the residual stresses of Stellite hard-facing on carbon steel

H. Murakawa, Y. Ueda, A. Wu, 2000 .

Effect of residual stress modification technique on CTOD test results in heavy thick welded joints

H. Murakawa, T. Okawa, Y. Kayamori, 2021, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY.

Residual stresses in laser-arc hybrid welded butt-joint with different energy ratios

Hui Huang, Ninshu Ma, Hidekazu Murakawa, 2015 .

Finite element analysis of deformation in early stage of multi-pass circumferential dissimilar welding of thick-walled pipes with narrow gap

H. Murakawa, H. Serizawa, Y. Okuda, 2016, Welding in the World.

Numerical simulation of residual stress and deformation considering phase transformation effect

Hisashi Serizawa, 英一村川, Hidekazu Murakawa, 2003 .

Numerical Simulation of Residual Stress and Deformation Considering Phase Transformation Effects(Mechanics, Strength & Structural Design)

Hisashi Serizawa, Hidekazu Murakawa, Masakazu Shibahara, 2003 .

Analysis of cross effect on inherent deformation during the line heating process – Part 1 – Single crossed heating lines

Sherif Rashed, Hidekazu Murakawa, Adan Vega, 2015 .

Shear strength of CMT brazed lap joints between aluminum and zinc-coated steel

Ninshu Ma, Hidekazu Murakawa, Yongping Lei, 2013 .

Applications of Computer and Numerical Analysis Techniques in Welding Research

Yukio Ueda, Hidekazu Murakawa, H. Murakawa, 1984 .

Characteristic Tensor for Evaluation of Singular Stress Field under Mixed-mode Loadings

Kei Saito, H. Murakawa, T. Hirashima, 2020, Computer Modeling in Engineering & Sciences.

Welding deformation and residual stresses in arc welded lap joints by modified iterative analysis

Hidekazu Murakawa, T. Hashimoto, H. Murakawa, 2015 .

Numerical Analysis of Hot Cracking in Welded Pipe Structure

Hisashi Serizawa, Hidekazu Murakawa, Takuya Iwamoto, 2012 .

Prediction of Hot Cracks of T-Joints in Full-Penetration Welding Process

H. Murakawa, M. Shibahara, H. Serizawa, 2009 .

Prediction of Pear-shaped Bead Cracking Under Full Penetration Welding of T-Joints Using Temperature Dependent Interface Element

H. Murakawa, M. Shibahara, H. Serizawa, 2009 .

Finite Elasticity Solutions Using Hybrid Finite Elements Based on a Complementary Energy Principle

S. Atluri, H. Murakawa, 1978 .

Study on the relationship between the root welding residual stress and the root-failure fatigue strength of Plug welded specimens

N. Osawa, H. Murakawa, Yukihide Yoshihara, 2023, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY.

Friction Stir Welding of Thick Aluminium Welds—Challenges and Perspectives

S. Tsutsumi, H. Murakawa, Yufeng Sun, 2017 .

Numerical and experimental study on nugget formation in resistance spot welding for three pieces of high strength steel sheets

Hidekazu Murakawa, Ninshu Ma, H. Murakawa, 2010 .

Inherent Strain Method for Residual Stress Measurement and Welding Distortion Prediction

H. Murakawa, K. Nakacho, N. Ma, 2016 .

Prediction of Welding Deformation and Residual Stress by Elastic FEM Based on Inherent Strain

Yukio Ueda, Hidekazu Murakawa, Yu Luo, 1996 .

Simulation Procedures for Welding Heat Conduction, Welding Deformation, and Residual Stresses Using the FEM Programs Provided on the Companion Website

Yukio Ueda, Ninshu Ma, Hidekazu Murakawa, 2013 .

A practical method for prediction of distortion produced on large thin plate structures during welding assembly

H. Murakawa, M. Sano, S. Rashed, 2013, Welding in the World.

An inverse analysis method to estimate inherent deformations in thin plate welded joints

Hidekazu Murakawa, H. Murakawa, W. Liang, 2012 .

Predicting welding deformation in thin plate panel structure by means of inherent strain and interface element

Hidekazu Murakawa, D. Deng, H. Murakawa, 2012 .

Improvement in numerical accuracy and stability of 3-D FEM analysis in welding

Hidekazu Murakawa, J. Wang, Y. Ueda, 1996 .

Measurement and Numerical Analysis of Welding Residual Stress in Box Structure Employed for Breeder Blanket System of Iter

H. Murakawa, H. Serizawa, M. Enoeda, 2011 .

Actual Application of Large-scaled FEM for Analysis of Mechanical Problems in Welding

Hisashi Serizawa, Hidekazu Murakawa, H. Murakawa, 2006 .

Prediction of the residual welding stress in 2.25Cr-1Mo steel by taking into account the effect of the solid-state phase transformations

D. Deng, H. Murakawa, N. Ma, 2013, Acta Metallurgica Sinica (English Letters).

Fast three-dimensional multipass welding simulation using an iterative substructure method

Hisashi Serizawa, Akira Maekawa, Hidekazu Murakawa, 2015 .

Introduction to Measurement and Prediction of Residual Stresses with the Help of Inherent Strains

Yukio Ueda, Ninshu Ma, Hidekazu Murakawa, 2012 .

Heated Band Width Criterion Based on Stress Relief in Local Post Weld Heat Treatment of Concurrent Tubular Joint(Mechanics, Strength & Structure Design)

H. Murakawa, Jianhua Wang, Y. Horii, 2002 .

Mechanical Behavior in Local Post Weld Heat Treatment (Report IV) : Influence of residual stress distribution in multi-pass welding(Mechanics, Strength & Structure Design)

Hidekazu Murakawa, H. Lu, H. Lu, 1999 .

Mechanical Behavior in Local Post Weld Heat Treatment (Report I) : Visco-Elastic-Plastic FEM Analysis of Local PWHT(Mechanics, Strength & Structure Design)

H. Murakawa, Jianhua Wang, Hao Lu, 1998 .

Mechanical Behavior in Local Postweld Heat Treatment (Report II) : Determination of Critical Heated Band during Local PWHT(Mechanics, Strength & Structure Design)

H. Murakawa, Jianhua Wang, Hao Lu, 1998 .

Criteria for Heated Band Width Based on Through-thickness Temperature Distribution

Hidekazu Murakawa, H. Murakawa, Jianhua Wang, 2001 .

Measuring Method for Residual Stresses in Explosively Clad Plates and a Method of Residual Stress Reduction

Yukio Ueda, Hidekazu Murakawa, H. Murakawa, 1996 .

MECHANICAL BEHAVIOR IN LOCAL POSTWELD HEAT TREATMENT. (REPORT III) : CRITERIA FOR HEATED BAND WIDTH BASED ON THROUGH-THICKNESS TEMPERATURE DISTRIBUTIO N

H. Murakawa, 英一村川, Jianhua Wang, 1998 .

Influence of rotational and vertical motions on fluid force on a floating body in collision

H. Murakawa, Y. Ueda, Katsuyuki Nabeta, 1993 .

A Simple Measuring Method of Welding Inherent Deformation Using Inverse Analysis

Wei Liang, Hisashi Serizawa, Hidekazu Murakawa, 2004 .

A Computational Approach on Prediction of Welding Residual Stress with Considering Solid-state Phase Transformations

D. Deng, H. Murakawa, N. Ma, 2012 .

A potential node release technique for estimating ductile crack growth in metallic materials

H. Murakawa, J. Zhang, 2013 .

Crack singular field evaluation with characteristic tensor considering residual stress

Kei Saito, H. Murakawa, T. Hirashima, 2021, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY.

Numerical Study on Heat Straightening Process for Welding Distortion of a Stiffened Panel Structure

Sano Masanori, Naoki Osawa, Hidekazu Murakawa, 2015 .

Artificial Neural Network Application for Parameter Prediction of Heat Induced Distortion

Hidekazu Murakawa, Cesar Pinzon, Kazuhiko Hasewaga, 2016, IEA/AIE.

Strategic Thinking(Topics)

Hidekazu Murakawa, Constantin Bratianu, C. Bratianu, 2004 .

Fast Finite Element Analysis of Weld Residual Stress in Large-Diameter Thick-Walled Stainless Steel Pipe Joints and Its Experimental Validation

Hisashi Serizawa, Akira Maekawa, Hidekazu Murakawa, 2013 .

Prediction of Weld Residual Stress in a Pressurized Water Reactor Pressurizer Surge Nozzle

Hisashi Serizawa, Hidekazu Murakawa, Akira Maekawa, 2016 .

Fast Computation Based on an Iterative Substructure Method for Three-Dimensional Simulation of Multipass Welding

Hisashi Serizawa, Hidekazu Murakawa, Akira Maekawa, 2015 .

Residual Stress Study in Dissimilar Metal Welds of a PWR Pressurizer Surge Nozzle: Validation of Developed Fast Analysis Method and Examination of Safe-End Length Effect

Hisashi Serizawa, Akira Maekawa, Atsushi Kawahara, 2013 .

Fast Computational Residual Stress Analysis for Welded Pipe Joint Based on Iterative Substructure Method

Hisashi Serizawa, Akira Maekawa, Shigeru Takahashi, 2011 .

Numerical analysis of deformation in multi-pass circumferential TIG welding with narrow gap

H. Murakawa, H. Serizawa, Y. Fujita, 2013, Welding in the World.

Thermo-Mechanical-Metallurgical Model of Welded Steel : Part I : Evolution Equations for Internal Material Structures

H. Murakawa, Y. Ueda, K. Ikeuchi, 1994 .

THEORETICAL PREDICTION OF BUCKLING IN THERMAL MANUFACTURING PROCESS

Hidekazu Murakawa, Jiangchao Wang, H. Murakawa, 2012 .

Method For Predicting Deformation of Curved Structures Under Assembly By Welding

Hidekazu Murakawa, Masakazu Shibahara, Dean Deng, 2003 .

Buckling Behavior of Plates under Idealized Inherent Strain(Mechanics, Strength & Structural Design)

Yukio Ueda, Hidekazu Murakawa, H. Murakawa, 1995 .

Study on Transient Buckling Behavior of Thin Plate Structures during Welding Process

H. Murakawa, Jiangchao Wang, 2012 .

Title Study on Transient Buckling Behavior of ThinPlate Structures during Welding Process

H. Murakawa, 2022 .

Residual Stresses in Flash Butt Welded Rail

Ninshu Ma, Hidekazu Murakawa, Yuebo Qu, 2011 .

Thickness and weld orientation effects on fatigue crack growth after a single tensile overload

H. Murakawa, M. Shibahara, R. Gadallah, 2023, International Journal of Pressure Vessels and Piping.

A dual-mesh method for efficient thermal stress analysis of large-scale welded structures

Hui Huang, Zhili Feng, Ninshu Ma, 2019, The International Journal of Advanced Manufacturing Technology.

A dual-mesh method for efficient thermal stress analysis of large-scale welded structures

Hui Huang, Zhili Feng, H. Murakawa, 2019, The International Journal of Advanced Manufacturing Technology.

Impact Strength Analysis of Plate Panels with Welding-Induced Residual Stress and Deformation

Yehia A. Abdel-Nasser, H. Murakawa, N. Ma, 2016 .

Dynamic Mesh Refining and Iterative SubstructureMethod for FilletWelding Thermo-Mechanical Analysis

Hui Huang, Hidekazu Murakawa, H. Murakawa, 2015 .

Numerical Prediction of Welding Hot Cracking using Three-Dimensional Fem with Temperature Dependent Interface Element

H. Murakawa, M. Shibahara, H. Serizawa, 2005 .

Development of Hierarchical Multi-Grid Method And Its Application to the Iterative Substructure Method

H. Murakawa, M. Shibahara, H. Serizawa, 2009 .

Deformation characteristics and microstructural evolution in friction stir welding of thick 5083 aluminum alloy

S. Tsutsumi, H. Murakawa, Yufeng Sun, 2018, The International Journal of Advanced Manufacturing Technology.

Mechanical Behavior in Local Postweld Heat Treatment (Report III) : Criteria for heated band width based on through-thickness temperature distribution(Mechanics, Strength & Structure Design)

Hidekazu Murakawa, H. Murakawa, Jianhua Wang, 1998 .

Development of 3D Finite Element Method for Hot Cracking Using Interface Element and Its Application for Pear-shaped Bead Cracking Under Narrow Gap Welding

H. Murakawa, M. Shibahara, H. Serizawa, 2009 .

Finite Element Analysis of Hot Cracking Under Welding Using Temperature-Dependent Interface Element

H. Murakawa, M. Shibahara, H. Serizawa, 2001 .

A Computational Model of Phase Transformation for Welding Processes(Mechanics, Strength & Structural Design)

Yukio Ueda, Hidekazu Murakawa, Hidekazu Murakawa, 1995 .

Reduction of Welding Distortion for an Improved Assembly Process for Hatch Coaming Production

Hidekazu Murakawa, Jiangchao Wang, Sherif Rashed, 2013 .

Influential factors affecting inherent deformation during plate forming by line hating (Report 1) - the effect of plate size and edge effect

Hisashi Serizawa, Adan Vega, Hidekazu Murakawa, 2007 .

Study of welding inherent deformations in thin plates based on finite element analysis using interactive substructure method

Jianxun Zhang, Hisashi Serizawa, Hidekazu Murakawa, 2009 .

FEM prediction of buckling distortion induced by welding in thin plate panel structures

Hidekazu Murakawa, Dean Deng, D. Deng, 2008 .

Study on Welding Inherent Deformations in Welded Structural Materials

Hisashi Serizawa, Hidekazu Murakawa, Sherif Rashed, 2008 .

Prediction of Welding Distortion and Panel Buckling of Car Carrier Decks using Database Generated by FEA

Yasuhisa Okumoto, Hidekazu Murakawa, Sherif Rashed, 2007 .

STUDY ON TENDON FORCE FOR BUCKLING WELIDNG DISTORTION

H. Murakawa, Jiangchao Wang, N. Ma, 2012 .

Concept of inherent strain, inherent stress, inherent deformation and inherent force for prediction of welding distortion and residual stress

Ninshu Ma, Hidekazu Murakawa, Dean Deng, 2010 .

Efficiency comparison between iterative substructure method and commercial software

Hisashi Serizawa, Jianxun Zhang, Hidekazu Murakawa, 2010 .

OS1419 Fast Welding Simulation Based on Iterative Substructure Method and Its Validation

Hisashi Serizawa, Akira Maekawa, Hidekazu Murakawa, 2013 .

Development of Intelligent Database System for Welding and Joining Technology Based on Knowledge Management

Hisashi Serizawa, Hidekazu Murakawa, Takuya Tsumura, 2002 .

FEM Simulation of Spot Welding Process (Report III) : Controlling of Welding Current Using Electrode Displacement for Formation of Large Enough Nugget without Expulsion(Mechanics, Strength & Structure Design)

Jianxun Zhang, Hidekazu Murakawa, Jianxun Zhang, 1999 .

Finite element simulation of seam welding process

英一村川, Toshihito Kato, Hidekazu Murakawa, 2001 .

On seamless CAE analysis methodology from welding to strength analysis using a fracture mechanics concept

Hiroshi Okada, Satoshi Kadowaki, Hisashi Serizawa, 2014 .

TWISTING DEFORAMTION OF THIN PLATE STIFFENED STRUCTURE UNDER WELDING

Hidekazu Murakawa, Masakazu Shibahara, Jiangchao Wang, 2011 .

Influence of Cooling Channel in First and Side Walls on Welding Residual Stress of Test Blanket Module for Iter

H. Murakawa, H. Serizawa, H. Tanigawa, 2011 .

Basic Study of Joint Interface Formation in Magnetic Pressure Seam Welding

Hisashi Serizawa, Sherif Rashed, Hidekazu Murakawa, 2010 .

FEM Analysis of Joint Interface Formation in Magnetic Pressure Seam Welding

H. Murakawa, H. Serizawa, S. Rashed, 2010 .

Development of Thermal Elastic-plastic FEM for Line Heating with Remeshing Technique

Hisashi Serizawa, Hui Huang, Hidekazu Murakawa, 2013 .

Dependence of J-integral and Failure Assessment Diagram on Strength Mismatching and Crack Length for Welded Joint Specimen(Mechanics, Strength & Structure Design)

Yukio Ueda, Hidekazu Murakawa, Yongping Lei, 1997 .

The effect of mechanical heterogeneity and limit load of a weld joint with longitudinal weld crack on the J-integral and failure assessment curve

Hidekazu Murakawa, Y. P. Lei, Y. W. Shi, 1998 .

Finite Element Analysis of Welding Distortion in a Large Thin-plate Panel Structure

Ninshu Ma, Hidekazu Murakawa, Dean Deng, 2011 .

100 CAE analysis software system for welded structure based on fracture mechanics concept

Hiroshi Okada, Hisashi Serizawa, Masakazu Shibahara, 2015 .

Optimization of Forming Process of a U-rib by GasHeating Based on Theoretical Prediction

N. Osawa, H. Murakawa, S. Takaba, 2015 .

Three-dimensional Thermal-elastic-plastic FEM Analysis For Predicting Residual Stress And Deformation Under Multi-pass Welding

Hisashi Serizawa, Hidekazu Murakawa, Masakazu Shibahara, 2004 .

A Critical Review on Modeling of Fracture Behavior of Ceramic Joints

H. Murakawa, H. Serizawa, 2014 .

New Computer Simulation Method for Evaluation of Crack Growth Using Lennard-Jones Type Potential Function

Hidekazu Murakawa, Z. Q. Wu, H. Serizawa, 1999 .

Fast Simulation for Multi-Pass Welding Process Using Iterative Substructure Method: Investigation of Optimization and Efficient Computation

Hisashi Serizawa, Akira Maekawa, Atsushi Kawahara, 2014 .

Prediction of Weld Residual Stress in a PWR Pressurizer Surge Nozzle: A Proposed Fast Computational 3D Analysis Method and Influence of Its Heat Source Model

Hisashi Serizawa, Akira Maekawa, Atsushi Kawahara, 2012 .

Fast Computational Simulation for Multi-Pass Welding of Pipe Joint Based on Iterative Substructure Method

Hisashi Serizawa, Akira Maekawa, Atsushi Kawahara, 2013 .

Evaluation of Residual Stress Distribution in Austenitic Stainless Steel Pipe Butt-Welded Joint

Michiyasu Noda, Hisashi Serizawa, Akira Maekawa, 2009 .

Investigation of Inherent Deformation in Fillet Welded Thin Plate T-joints Based on Interactive Substructure and Inverse Analysis Method

Hisashi Serizawa, Jianxun Zhang, Hidekazu Murakawa, 2009 .

Development of Finite Element Program of Three Dimensional Thermal-Elastic-Plastic Analysis and Its Application to Assembly of a Compressor by Welding.

H. Murakawa, Y. Ueda, Jianhua Wang, 1995 .

Analysis and Prediction of Multi-Heating Lines Effect on Plate Forming by Line Heating

Adan Vega, Hidekazu Murakawa, Sherif Rashed, 2008 .

Analysis and Prediction of Edge Effect on Inherent Deformation of Thick Plates Formed by Line Heating

Hidekazu Murakawa, H. Murakawa, Naoki Osawa Sherif Rashed Adan Vega, 2010 .

Analysis and Prediction of Overlapping Effect on InherentDeformation During the Line Heating Process

Adan Vega, Alexandra Camaño, Hidekazu Murakawa, 2013 .

Analysis and Prediction of Parallel Effect on Inherent Deformation during the Line Heating Process

Adan Vega, Ninshu Ma, Hidekazu Murakawa, 2013 .

Stability analysis of structures via a new complementary energy method

S. Atluri, H. Murakawa, K. Reed, 1981 .

Finite deformations, finite rotations, and stability of plates: A complementary energy-finite element analysis

S. Atluri, H. Murakawa, 1981 .

Numerical modelling of nonlinear behaviour of soft biological materials

S. Atluri, A. Kobayashi, H. Murakawa, 1979 .

Effect of jig constraint position and pitch on welding deformation

Hidekazu Murakawa, Hui Huang, Ninshu Ma, 2015 .

Development of Dynamic Mesh Refining Method for Large Scale Thermal and Mechanical Analysis in Welding and Line Heating

Hui Huang, Hidekazu Murakawa, H. Murakawa, 2013 .

Numerical and Experimental Investigations on Welding Deformation

Hisashi Serizawa, Hidekazu Murakawa, Sherif Rashed, 2008 .

Dynamic mesh refining method for welding simulation of large scale structures

H. Huang, H. Murakawa, H. Murakawa, 2013 .

Influence of preparation procedures on residual stresses in welded joint specimen for toughness test

H. Murakawa, Hui Huang, 2015 .

Theoretical Prediction of Welding Distortion Considering Positioning And the Gap Between Parts

Yukio Ueda, Hidekazu Murakawa, Dean Deng, 2001 .

Computational welding mechanics

Yukio Ueda, Hidekazu Murakawa, H. Murakawa, 1996 .

Welding Deformation of Plates with Longitudinal Curvature †

H. Murakawa, Yuejian Luo, M. Ishiyama, 2000 .

Simulation of nugget formation process in spot welding with process tape

H. Murakawa, G. Kashiyama, 2013 .

FEM Simulation of Spot Welding Process (report IV) : Characteristics of Electrode Displacement and Nugget Formation(Mechanics, Strength & Structure Design)

Jianxun Zhang, Hidekazu Murakawa, Koji Fuji, 2000 .

FEM Simulation of Spot Welding Process (Report I) : Effect of Initial Gap on Nugget Formation(Mechanics, Strength & Structure Design)

H. Murakawa, J. Zhang, H. Murakawa, 1998 .

Development of Large-scaled FEM for Analysis of Mechanical Problems in Welding

Hisashi Serizawa, Hidekazu Murakawa, H. Murakawa, 2005 .

Measurement of Inherent Deformations in Typical Weld Joints Using Inverse Analysis (Part 1) : Inherent Deformation of Bead on Welding(Mechanics, Strength & Structural Design)

Hisashi Serizawa, Hidekazu Murakawa, Shinji Sone, 2004 .

Measurement of Inherent Deformations in Typical Weld Joints Using Inverse Analysis (Part2) Prediction of Welding Distortion of Large Structure

Hidekazu Murakawa, Dean Deng, D. Deng, 2005 .

A numerical study of parameters governing an inherent deformation database of plates formed by line heating

H. Murakawa, H. Serizawa, A. Vega, 2008 .

Development of Computer-Aided Process Planning System for Plate Bending by Line Heating (Report 2)—Practice for Plate Bending in Shipyard Viewed from Aspect of Inherent Strain

Yukio Ueda, H Murakawa, H. Murakawa, 1994 .

DEVELOPMENT OF COMPUTER-AIDED PROCESS PLANNING SYSTEM FOR PLATE BENDING BY LINE HEATING (REPORT 1) - RELATION BETWEEN FINAL FORM OF PLATE AND INHERENT STRAIN

Yukio Ueda, H Murakawa, H. Murakawa, 1994 .

Numerical Study On Inherent Deformation of Thick Plates Undergoing Line Heating

H. Murakawa, A. Vega, Y. Tajima, 2007 .

Effects of Welding Procedures on Residual Stresses of T-Joints(Mechanics, Strength & Structure Design)

Yukio Ueda, Hidekazu Murakawa, Wu Aiping, 1996 .

Strategic Simulation Analyses for Manufacturing Problems Related to Welding

Yukio Ueda, Hidekazu Murakawa, Ninshu Ma, 2013 .

Basic study on residual stress occurred at start and end point of welding

H. Murakawa, K. Ogawa, S. Nishikawa, 2008 .

Numerical Study of Stress Triaxiality and Fracture Driving Force for Notched Specimen with Mechanical Heterogeneity(Mechanics, Strength & Structure Design)

H. Murakawa, J. Zhang, 1998 .

Thermo-mechanical analysis of line heating process by an efficient and accurate multi-level mesh refining method

Hui Huang, Hidekazu Murakawa, H. Murakawa, 2016 .

EFFECT OF VARIOUS FACTORS ON TRANSVERSE SHRINKAGE UNDER BUTT WELDING

H. Murakawa, M. Shibahara, 正和柴原, 1998 .

Prediction of Distortion Produced in Welded Structures During Straightening Process Using the Inherent Strain Method

Naoki Osawa, Hidekazu Murakawa, Sherif Rashed, 2016 .

Development of new interface potential for evaluating strength of SiC/SiC composite joint

C. Lewinsohn, H. Murakawa, H. Serizawa, 2004 .

Computational analysis of creep fracture deformation in SiC/SiC composites

Hidekazu Murakawa, C. Lewinsohn, H. Murakawa, 2001 .

New evaluation method of crack growth in SiC/SiC composites using interface elements

C. Lewinsohn, H. Murakawa, H. Serizawa, 2000 .

Evaluation of Strength of SiC/SiC Composite Joint Using New Interface Potential

C. Lewinsohn, H. Murakawa, H. Serizawa, 2004 .

Prospective Design of Weld Joint between First and Side Walls in Test Blanket Module for ITER

H. Murakawa, H. Serizawa, H. Tanigawa, 2010 .

DEVELOPMENT OF COMPUTER-AIDED PROCESS PLANNING SYSTEM FOR PLATE BENDING BY LINE HEATING (REPORT 3) - RELATION BETWEEN HEATING CONDITION AND DEFORMATION

Yukio Ueda, H Murakawa, H. Murakawa, 1993 .

Development of Computer Aided Process Planning System for Plate Bending by Line-Heating

Yukio Ueda, H Murakawa, Ryoichi Kamichika, 1993 .

FEM Analysis of 3-D Welding Residual Stresses and Angular Distortion in T-type Fillet Welds(Mechanics, Strength & Structural Design)

Yukio Ueda, Hidekazu Murakawa, Hideaki Maeda, 1995 .

Simulation of Welding Deformation for Precision Ship Assembling (Report I) : In-plane Deformation of Butt Welded Plate(Mechanics, Strength & Structural Design)

Yukio Ueda, Yasuhisa Okumoto, Hidekazu Murakawa, 1992 .

Influential Factors Affecting Inherent Deformation During Plate Forming By Line Heating (Report 4)-The Effect of Material Properties

H. Murakawa, A. Vega, S. Rashed, 2011 .

Numerical Study of Inherent Deformation Produced in Thick Plate through Bending by Line Heating

Hidekazu Murakawa, Wei Liang, Adan Vega, 2006 .

An Evaluation Method for Ductile Crack Propagation in Pre-strained Plates

H. Murakawa, Y. Ueda, M. Tanigawa, 1996 .

Prediction of the fatigue curve of high-strength steel resistance spot welding joints by finite element analysis and machine learning

Mingyao Liu, H. Murakawa, N. Ma, 2023, The International Journal of Advanced Manufacturing Technology.

FEM Simulation of the Spot Welding Process (Report II) : Effect of Initial Gap and Electrode-type on Nugget Formation and Expulsion(Mechanics, Strength & Structure Design)

H. Murakawa, J. Zhang, 1998 .

Computational welding mechanics and its interface with industrial application

H. Murakawa, 1996 .