H. Serizawa

发表

Finite Element Analysis Using Interface Element for Predicting Deformation during Butt Welding Considering Root Gap and Tack Welds(Mechanics, Strength & Structure Design)

H. Murakawa, M. Shibahara, H. Serizawa, 2002 .

Finite element analysis using interface element for predicting deformation during butt welding considering root gap and tack welds

H. Murakawa, M. Shibahara, H. Serizawa, 2002 .

Fractal Multi-Grid Method for Ultra Large Scale Mechanical and Thermal Simulations

Hisashi Serizawa, Hidekazu Murakawa, H. Murakawa, 2005 .

Welding distortion investigation in fillet welded joint and structure based on iterative substructure method

Jianxun Zhang, H. Murakawa, H. Serizawa, 2009 .

Numerical Analysis of the Straightening Process of Thin Plate Structures by Elastic FEM based on the Inherent Strain Method

Hisashi Serizawa, Juan Blandon, Adan Vega, 2012 .

FEM simulation of welding distortion in thin curved structures during assembly considering gap and misalignment

D. Deng, H. Murakawa, H. Serizawa, 2002 .

Evaluation of Interfacial Shear Strength of C/C Composites by means of Micro-Indentation Test

A. Kohyama, H. Serizawa, H. Tsunakawa, 1996 .

Experimental studies on joinability of zircaloy and SiC/SiC composite with titanium powder

M. Tsukamoto, H. Serizawa, H. Kishimoto, 2019, International Journal of Ceramic Engineering & Science.

Influences of Laser Condition and Slit Shape on Joinability of Zircaloy-SiC/SiC Composite Tube Joint

A. Kohyama, M. Tsukamoto, N. Asakura, 2019, Proceeding of the 42nd International Conference on Advanced Ceramics and Composites.

Effect of Slit Shape on Joinability of Zircaloy - SiC/SiC Composite Tube Joint with Titanium Powder

M. Tsukamoto, H. Serizawa, H. Kishimoto, 2018, Materials Science Forum.

Development of Caulked Joint Between Zircaloy and SiC/SiC Composite Tubes by Using Diode Laser

A. Kohyama, M. Tsukamoto, N. Asakura, 2017 .

Development of Joining Method between Zircaloy and SiC/SiC Composite Tubes by Using Diode Laser

A. Kohyama, M. Tsukamoto, N. Asakura, 2016 .

Development of New Particle Method Based on MPS and its Applicability for Friction Stir Welding of Dissimilar Joint

H. Serizawa, F. Miyasaka, K. Mitsufuji, 2021 .

New Combined Method of mps and fem for Simulating Friction Stir Processing

H. Serizawa, F. Miyasaka, 2015 .

Basic numerical analysis of friction stir welding with a combination of MPS and FEM

H. Murakawa, H. Serizawa, F. Miyasaka, 2013 .

Weldability of 9 Cr-ODS and JLF-1 Steels for Dissimilar Joining with Hot Isostatic Pressing and Electron Beam Welding ∗ )

T. Muroga, T. Nagasaka, A. Hasegawa, 2015 .

Weldability of dissimilar joint between F82H and SUS316L under fiber laser welding

H. Serizawa, H. Mori, H. Ogiwara, 2013 .

Joint inhomogeneity in dissimilar friction stir welded martensitic and nanostructured ferritic steels

H. Serizawa, A. Kimura, W. Han, 2018 .

Young's Modulus Change of Carbon Fibers and C/C Composites by Heat Treatment

A. Kohyama, H. Serizawa, H. Tsunakawa, 1997 .

HIGH-STRENGTH SIC MATRIX PRODUCTION WITH POLYMERIC TECHNIQUES

A. Kohyama, Y. Katoh, H. Serizawa, 2005 .

Technical issues of reduced activation ferritic/martensitic steels for fabrication of ITER test blanket modules

Steven J. Zinkle, Hisashi Serizawa, Eiichi Wakai, 2008 .

Temperature dependence of internal friction and elastic modulus of SiC/SiC composites

A. Kohyama, T. Noda, H. Araki, 2003 .

Evaluation of Elastic Properties in C/C Composites by means of FEM Analysis of Fiber Indentation Tests(Mechanics, Strength & Structure Design)

A. Kohyama, H. Serizawa, H. Tsunakawa, 1997 .

Internal friction and gas desorption of {C}/{C} composites

A. Kohyama, H. Serizawa, Shinji Sato, 1994 .

Effects of tool rotation speed on the mechanical properties and microstructure of friction stir welded ODS steel

T. Nagasaka, A. Hasegawa, H. Serizawa, 2014 .

Basic analysis of microstructural fracture behavior in structural materials by using FEM with interface element

H. Murakawa, H. Serizawa, Seigo Tomiyama, 2011 .

Computational Analysis of Crack Growth in Composite Materials Using Lennard‐Jones Type Potential Function

H. Murakawa, H. Serizawa, Z. Q. Wu, 2008 .

Numerical Analysis of Mechanical Test Methods for Evaluating Shear Strength of Joint by Using Interface Element

C. Lewinsohn, H. Murakawa, H. Serizawa, 2007 .

Effect of Specimen Geometry on Microstructural Fracture Behavior in Nano Composites under HVEM

H. Murakawa, H. Serizawa, T. Shibayama, 2014 .

Numerical Analysis of Microstructural Fracture Behavior in Nano Composites under HVEM

H. Murakawa, H. Serizawa, T. Shibayama, 2013 .

Development of Numerical Tool for Analysis of Microstructural Fracture Behavior in Smart & Intelligent Materials

H. Murakawa, H. Serizawa, Seigo Tomiyama, 2012 .

Evaluation of Fracture Behavior of Ceramic Composite Joints by Using a New Interface Potential

C. Lewinsohn, H. Murakawa, H. Serizawa, 2005 .

Numerical Analysis of Fracture Behavior in Anisotropic Microstructures

H. Murakawa, H. Serizawa, Seigo Tomiyama, 2012 .

Preliminary numerical research of microstructural fracture behavior in metal by using interface element

H. Murakawa, H. Serizawa, Seigo Tomiyama, 2010 .

Modeling of Fracture Strength of SiC/SiC Composite Joints by Using Interface Elements

C. Lewinsohn, H. Murakawa, H. Serizawa, 2012 .

Development of Numerical Method for Evaluating Microstructural Fracture in Smart Materials

H. Murakawa, H. Serizawa, Seigo Tomiyama, 2011 .

Finite Element Analysis of Single Lap Joined Ceramic Composites by Using An Interface Element

H. Murakawa, H. Serizawa, M. Singh, 2006 .

Plastic deformation behavior and bonding strength of an EBW joint between 9Cr-ODS and JLF-1 estimated by symmetric four-point bend tests combined with FEM analysis

T. Muroga, T. Nagasaka, H. Serizawa, 2016 .

Numerical Simulation of Fracture Behavior of Ceramic Composite Joints By Using A Combined Interface Potential(Mechanics, Strength & Structure Design)

C. Lewinsohn, H. Murakawa, H. Serizawa, 2004 .

Mechanism and Effect of Stress-induced Transformation on Improvement of Fracture Toughness

H. Murakawa, H. Serizawa, Seigo Tomiyama, 2009 .

Finite Element Analysis of Mechanical Test Methods for Evaluating Shear Strength of Ceramic Composite Joints Using Interface Element

C. Lewinsohn, H. Murakawa, H. Serizawa, 2008 .

High Temperature Properties and Creep Resistance of Near‐Stoichiometric SiC Fibers

R. Jones, C. Lewinsohn, G. Youngblood, 2008 .

FINITE ELEMENT ANALYSIS OF SiC/SiC COMPOSITE JOINTS BY USING A NEW INTERFACE POTENTIAL

C. Lewinsohn, H. Murakawa, H. Serizawa, 2005 .

Numerical study of local PWHT condition for EB welded joint between first and side walls in ITER-TBM

H. Murakawa, H. Serizawa, H. Tanigawa, 2013 .

Laser Beam Welding for Reduced Activation Ferritic/Martensitic Steel F82H

H. Serizawa, K. Saida, H. Mori, 2014 .

Engineering validation for lithium target facility of the IFMIF under IFMIF/EVEDA project

R. Heidinger, T. Terai, A. Suzuki, 2016 .

Effects of rotation speed on microstructure and hardness of friction stir welded ODS ferritic steel

H. Serizawa, Y. Morisada, H. Fujii, 2013 .

Effect of Interfacial Shear Strength on Mechanical Property of SiC/SiC

A. Kohyama, T. Hinoki, H. Serizawa, 1997 .

Finite Element Method for Hot Cracking Using Temperature Dependent Interface Element (Report II)

H. Murakawa, M. Shibahara, H. Serizawa, 2000 .

Modifications of grain-boundary structure by friction stir welding in the joint of nano-structured oxide dispersion strengthened ferritic steel and reduced activation martensitic steel

H. Serizawa, Y. Morisada, H. Fujii, 2015 .

Actual application of FEM to analysis of large scale mechanical problems in welding

Hisashi Serizawa, Hidekazu Murakawa, H. Murakawa, 2007 .

Impact of friction stir welding on recrystallization of oxide dispersion strengthened ferritic steel

H. Serizawa, Pingping Liu, Q. Zhan, 2017 .

Effect of Various Factors on Interface Formation in Magnetic Pressure Seam Welding

H. Murakawa, H. Serizawa, S. Kumai, 2010 .

Numerical Study of Joining Process in Magnetic Pressure Seam Welding

Hisashi Serizawa, Hidekazu Murakawa, Sherif Rashed, 2009 .

Effect of mechanical restraint on weldability of reduced activation ferritic/martensitic steel thick plates

S. Katayama, Y. Kawahito, H. Serizawa, 2011 .

Finite element analysis of deformation in early stage of multi-pass circumferential dissimilar welding of thick-walled pipes with narrow gap

H. Murakawa, H. Serizawa, Y. Okuda, 2016, Welding in the World.

Numerical simulation of residual stress and deformation considering phase transformation effect

Hisashi Serizawa, 英一村川, Hidekazu Murakawa, 2003 .

Numerical Simulation of Residual Stress and Deformation Considering Phase Transformation Effects(Mechanics, Strength & Structural Design)

Hisashi Serizawa, Hidekazu Murakawa, Masakazu Shibahara, 2003 .

High-Temperature Properties of Newly Developed Advanced SiC Fibers

A. Kohyama, C. Lewinsohn, H. Serizawa, 1998 .

HIGH TEMPERATURE STRENGTH AND OXIDATION RESISTANCE OF NEWLY DEVELOPED SIC FIBERS

A. Kohyama, R. Jones, C. Lewinsohn, 1998 .

Numerical Analysis of Hot Cracking in Welded Pipe Structure

Hisashi Serizawa, Hidekazu Murakawa, Takuya Iwamoto, 2012 .

Prediction of Hot Cracks of T-Joints in Full-Penetration Welding Process

H. Murakawa, M. Shibahara, H. Serizawa, 2009 .

Prediction of Pear-shaped Bead Cracking Under Full Penetration Welding of T-Joints Using Temperature Dependent Interface Element

H. Murakawa, M. Shibahara, H. Serizawa, 2009 .

Numerical Analysis of Inhomogeneous Behavior in Friction Stir Processing by Using a New Coupled Method of MPS And FEM

H. Serizawa, F. Miyasaka, 2018 .

Influence of friction stir welding conditions on joinability of V-alloy/SUS316L dissimilar joint

T. Nagasaka, H. Serizawa, Y. Morisada, 2018 .

Influence of friction stir welding conditions on joinability of oxide dispersion strengthened steel / F82H ferritic/martensitic steel joint

T. Nagasaka, H. Serizawa, Y. Morisada, 2016 .

Effects of mechanical force on grain structures of friction stir welded oxide dispersion strengthened ferritic steel

H. Serizawa, Y. Morisada, H. Fujii, 2014 .

Microstructure and mechanical property in heat affected zone (HAZ) in F82H jointed with SUS316L by fiber laser welding

H. Serizawa, S. Kano, H. Tanigawa, 2016 .

Measurement and Numerical Analysis of Welding Residual Stress in Box Structure Employed for Breeder Blanket System of Iter

H. Murakawa, H. Serizawa, M. Enoeda, 2011 .

Weldability of 9Cr-ODS and JLF-1 Steels for Dissimilar Joining with Hot Isostatic Pressing and Electron Beam Welding

T. Muroga, T. Nagasaka, A. Hasegawa, 2015 .

Experimental assessment of temperature distribution in heat affected zone (HAZ) in dissimilar joint between 8Cr-2W steel and SUS316L fabricated by 4 kW fiber laser welding

H. Serizawa, S. Kano, H. Tanigawa, 2016 .

Actual Application of Large-scaled FEM for Analysis of Mechanical Problems in Welding

Hisashi Serizawa, Hidekazu Murakawa, H. Murakawa, 2006 .

Fast three-dimensional multipass welding simulation using an iterative substructure method

Hisashi Serizawa, Akira Maekawa, Hidekazu Murakawa, 2015 .

A Simple Measuring Method of Welding Inherent Deformation Using Inverse Analysis

Wei Liang, Hisashi Serizawa, Hidekazu Murakawa, 2004 .

Fast Finite Element Analysis of Weld Residual Stress in Large-Diameter Thick-Walled Stainless Steel Pipe Joints and Its Experimental Validation

Hisashi Serizawa, Akira Maekawa, Hidekazu Murakawa, 2013 .

Prediction of Weld Residual Stress in a Pressurized Water Reactor Pressurizer Surge Nozzle

Hisashi Serizawa, Hidekazu Murakawa, Akira Maekawa, 2016 .

Fast Computation Based on an Iterative Substructure Method for Three-Dimensional Simulation of Multipass Welding

Hisashi Serizawa, Hidekazu Murakawa, Akira Maekawa, 2015 .

Residual Stress Study in Dissimilar Metal Welds of a PWR Pressurizer Surge Nozzle: Validation of Developed Fast Analysis Method and Examination of Safe-End Length Effect

Hisashi Serizawa, Akira Maekawa, Atsushi Kawahara, 2013 .

Fast Computational Residual Stress Analysis for Welded Pipe Joint Based on Iterative Substructure Method

Hisashi Serizawa, Akira Maekawa, Shigeru Takahashi, 2011 .

Numerical analysis of deformation in multi-pass circumferential TIG welding with narrow gap

H. Murakawa, H. Serizawa, Y. Fujita, 2013, Welding in the World.

Numerical Prediction of Welding Hot Cracking using Three-Dimensional Fem with Temperature Dependent Interface Element

H. Murakawa, M. Shibahara, H. Serizawa, 2005 .

Development of Hierarchical Multi-Grid Method And Its Application to the Iterative Substructure Method

H. Murakawa, M. Shibahara, H. Serizawa, 2009 .

Development of 3D Finite Element Method for Hot Cracking Using Interface Element and Its Application for Pear-shaped Bead Cracking Under Narrow Gap Welding

H. Murakawa, M. Shibahara, H. Serizawa, 2009 .

Finite Element Analysis of Hot Cracking Under Welding Using Temperature-Dependent Interface Element

H. Murakawa, M. Shibahara, H. Serizawa, 2001 .

Influential factors affecting inherent deformation during plate forming by line hating (Report 1) - the effect of plate size and edge effect

Hisashi Serizawa, Adan Vega, Hidekazu Murakawa, 2007 .

Study of welding inherent deformations in thin plates based on finite element analysis using interactive substructure method

Jianxun Zhang, Hisashi Serizawa, Hidekazu Murakawa, 2009 .

Study on Welding Inherent Deformations in Welded Structural Materials

Hisashi Serizawa, Hidekazu Murakawa, Sherif Rashed, 2008 .

Efficiency comparison between iterative substructure method and commercial software

Hisashi Serizawa, Jianxun Zhang, Hidekazu Murakawa, 2010 .

OS1419 Fast Welding Simulation Based on Iterative Substructure Method and Its Validation

Hisashi Serizawa, Akira Maekawa, Hidekazu Murakawa, 2013 .

Development of Intelligent Database System for Welding and Joining Technology Based on Knowledge Management

Hisashi Serizawa, Hidekazu Murakawa, Takuya Tsumura, 2002 .

On seamless CAE analysis methodology from welding to strength analysis using a fracture mechanics concept

Hiroshi Okada, Satoshi Kadowaki, Hisashi Serizawa, 2014 .

Effect of laser beam position on mechanical properties of F82H/SUS316L butt-joint welded by fiber laser

Hisashi Serizawa, Hiroaki Mori, Hiroyuki Ogiwara, 2014 .

Basic Numerical Study on Gap Influence of Residual Stress and Distortion during High-Brightness Laser Butt Welding

H. Serizawa, Murakawa Hidekazu, Daiki Mori, 2013 .

Influence of Cooling Channel in First and Side Walls on Welding Residual Stress of Test Blanket Module for Iter

H. Murakawa, H. Serizawa, H. Tanigawa, 2011 .

Packing experiment of breeder pebbles into water cooled solid breeder test blanket module for ITER

Hisashi Serizawa, Mikio Enoeda, Takanori Hirose, 2010 .

Basic Study of Joint Interface Formation in Magnetic Pressure Seam Welding

Hisashi Serizawa, Sherif Rashed, Hidekazu Murakawa, 2010 .

FEM Analysis of Joint Interface Formation in Magnetic Pressure Seam Welding

H. Murakawa, H. Serizawa, S. Rashed, 2010 .

Development of Thermal Elastic-plastic FEM for Line Heating with Remeshing Technique

Hisashi Serizawa, Hui Huang, Hidekazu Murakawa, 2013 .

Report of "The International Symposium on Visualization in Joining ^|^amp; Welding Science Through Advanced Measurements and Simulation (Visual-JW2010)"

Hisashi Serizawa, H. Serizawa, 2011 .

Exploitation Method of Large Scale High-Speed Computer in Analysis of Welding Problem

Hisashi Serizawa, H. Serizawa, 2007 .

100 CAE analysis software system for welded structure based on fracture mechanics concept

Hiroshi Okada, Hisashi Serizawa, Masakazu Shibahara, 2015 .

Three-dimensional Thermal-elastic-plastic FEM Analysis For Predicting Residual Stress And Deformation Under Multi-pass Welding

Hisashi Serizawa, Hidekazu Murakawa, Masakazu Shibahara, 2004 .

A Critical Review on Modeling of Fracture Behavior of Ceramic Joints

H. Murakawa, H. Serizawa, 2014 .

New Computer Simulation Method for Evaluation of Crack Growth Using Lennard-Jones Type Potential Function

Hidekazu Murakawa, Z. Q. Wu, H. Serizawa, 1999 .

Elastic FEM analysis of fiber push-out test for C/C composites

A. Kohyama, Kendra Watanabe, H. Serizawa, 1996 .

Fast Simulation for Multi-Pass Welding Process Using Iterative Substructure Method: Investigation of Optimization and Efficient Computation

Hisashi Serizawa, Akira Maekawa, Atsushi Kawahara, 2014 .

Prediction of Weld Residual Stress in a PWR Pressurizer Surge Nozzle: A Proposed Fast Computational 3D Analysis Method and Influence of Its Heat Source Model

Hisashi Serizawa, Akira Maekawa, Atsushi Kawahara, 2012 .

Fast Computational Simulation for Multi-Pass Welding of Pipe Joint Based on Iterative Substructure Method

Hisashi Serizawa, Akira Maekawa, Atsushi Kawahara, 2013 .

Evaluation of Residual Stress Distribution in Austenitic Stainless Steel Pipe Butt-Welded Joint

Michiyasu Noda, Hisashi Serizawa, Akira Maekawa, 2009 .

Investigation of Inherent Deformation in Fillet Welded Thin Plate T-joints Based on Interactive Substructure and Inverse Analysis Method

Hisashi Serizawa, Jianxun Zhang, Hidekazu Murakawa, 2009 .

Development of Joining Method for Zircaloy and SiC/SiC Composite Tubes by Using Fiber Laser

A. Kohyama, N. Asakura, H. Serizawa, 2016 .

Numerical and Experimental Investigations on Welding Deformation

Hisashi Serizawa, Hidekazu Murakawa, Sherif Rashed, 2008 .

Development of Computing Methods for Analysis of Joining-Induced Thermal Conduction, Residual Stress and Deformation in Thin Plates

H. Serizawa, N. Ma, 2018 .

Development of Large-scaled FEM for Analysis of Mechanical Problems in Welding

Hisashi Serizawa, Hidekazu Murakawa, H. Murakawa, 2005 .

Measurement of Inherent Deformations in Typical Weld Joints Using Inverse Analysis (Part 1) : Inherent Deformation of Bead on Welding(Mechanics, Strength & Structural Design)

Hisashi Serizawa, Hidekazu Murakawa, Shinji Sone, 2004 .

A numerical study of parameters governing an inherent deformation database of plates formed by line heating

H. Murakawa, H. Serizawa, A. Vega, 2008 .

Experimental assessment of temperature distribution in heat affected zone (HAZ) in dissimilar joint between 8Cr-2W steel and SUS316L fabricated by 4 kW fiber laser welding

H. Serizawa, S. Kano, H. Tanigawa, 2016 .

Development of new interface potential for evaluating strength of SiC/SiC composite joint

C. Lewinsohn, H. Murakawa, H. Serizawa, 2004 .

Computational analysis of creep fracture deformation in SiC/SiC composites

Hidekazu Murakawa, C. Lewinsohn, H. Murakawa, 2001 .

New evaluation method of crack growth in SiC/SiC composites using interface elements

C. Lewinsohn, H. Murakawa, H. Serizawa, 2000 .

Evaluation of Strength of SiC/SiC Composite Joint Using New Interface Potential

C. Lewinsohn, H. Murakawa, H. Serizawa, 2004 .

Prospective Design of Weld Joint between First and Side Walls in Test Blanket Module for ITER

H. Murakawa, H. Serizawa, H. Tanigawa, 2010 .

Theoretical Prediction of Welding Hot Cracking and Its Control(Mechanics, Strength & Structure Design, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)

Hisashi Serizawa, H. Serizawa, 2003 .