K. Ogawa

发表

Investigations on welding residual stresses in penetration nozzles by means of 3D thermal elastic plastic FEM and experiment

Shoichi Kiyoshima, Kazuo Ogawa, Dean Deng, 2009 .

The Measurement and Modelling of Residual Stresses in a Stainless Steel Pipe Girth Weld

D. Bray, N. Yanagida, K. Ogawa, 2008 .

Thermal rectification in nonmetallic solid junctions: Effect of Kapitza resistance

K. Ogawa, S. Tamura, 2012 .

Influence of Particle Velocity on Adhesion of Cold-Sprayed Splats

M. Boustie, Y. Ichikawa, K. Ogawa, 2008, International Thermal Spray Conference.

Influences of heat source model on welding residual stress and distortion in a multi-pass J-groove joint

Shoichi Kiyoshima, Kazuo Ogawa, Dean Deng, 2009 .

Residual Stress Evaluation of Dissimilar Weld Joint Using Reactor Vessel Outlet Nozzle Mock-Up Model (Report-1)

Kiminobu Hojo, Kazuo Ogawa, Naoki Ogawa, 2008 .

Prediction of residual stresses in a dissimilar metal welded pipe with considering cladding, buttering and post weld heat treatment

Shoichi Kiyoshima, Kazuo Ogawa, Dean Deng, 2009 .

Pre-Strain Effect on the Elevated Temperature Mechanical Properties of Type 304 Stainless Steel

K. Ogawa, H. Yoshizawa, Masaski Ishii, 1986 .

Corrosion Resistance and Antimicrobial Activity of Copper-Containing Silica Films Prepared by Chemical Solution Deposition

K. Ogawa, S. Ono, Hiroyasu Tsuge, 2003 .

Evaluation of Time-Dependent Fracture Mechanics Parameters of a Moving Crack in a Viscoelastic Strip

K. Ogawa, S. Yoneyama, M. Takashi, 1999 .

Crack growth behavior in an epoxy strip above and below Tg

K. Ogawa, M. Takashi, A. Misawa, 1998 .

Evaluation of Fracture Characteristics of Ni-Base Weld Metal for BWR Components

Masaaki Kikuchi, Takahiro Hayashi, Kazuo Ogawa, 2009 .

X-Ray Residual Stress Measurement on Weld Metal of Nickel Based Alloy

K. Ogawa, Y. Sano, K. Akita, 2005 .

Predicting welding residual stresses in a dissimilar metal girth welded pipe using 3D finite element model with a simplified heat source

Shoichi Kiyoshima, Kazuo Ogawa, Dean Deng, 2011 .

Study on Residual-Stress Redistributions During the Process of Manufacture of a Vessel Penetration Set-On Joint

E. Kingston, N. Yanagida, K. Ogawa, 2009 .

Welding Residual Stress Analysis Using Axisymmetric Modeling for Shroud Support Structure

Takahiro Hayashi, Kazuo Ogawa, Toshiyuki Saito, 2008 .

Residual Stress Evaluation of Dissimilar Weld Joint Using Reactor Vessel Outlet Nozzle Mock-Up Model: Report 2

D. Smith, E. Kingston, K. Ogawa, 2009 .

Measurement of Welding Residual Stresses by Inherent Strain Method

K. Ogawa, K. Nakacho, Shu Yoda, 2009 .

Finite Element Analyses of Residual Stresses in Typical Welded Joints Used in Nuclear Power Plants and Comparisons With Experiments

D. Deng, N. Yanagida, K. Ogawa, 2010 .

Basic study on residual stress occurred at start and end point of welding

H. Murakawa, K. Ogawa, S. Nishikawa, 2008 .