F. Wagner

发表

Modelling and prediction of mechanical properties for materials with hexagonal symmetry (zinc, titanium and zirconium alloys)

J. Fundenberger, M. Philippe, F. Wagner, 1997 .

On the mechanisms governing the texture and microstructure evolution during static recrystallization and grain growth of low alloyed zirconium sheets (Zr702)

F. Wagner, N. Bozzolo, P. Barbéris, 2006 .

Grain growth simulation in an IF steel – Effect of grain boundary mobility

F. Wagner, A. Ayad, N. Rouag, 2015 .

Texture evolution during grain growth in recrystallized commercially-pure titanium

F. Wagner, T. Grosdidier, N. Bozzolo, 2005 .

A study of the heterogeneity of plastic deformation in IF steel by EBSD

F. Wagner, D. Field, S. Berbenni, 2012 .

A new method to determine plastic deformation at the grain scale

F. Wagner, L. Toth, C. Gu, 2014 .

Plastic anisotropy and texture development in calcite polycrystals

P. Houtte, H. Wenk, F. Wagner, 1986 .

Effect of Recrystallization on Tensile Behavior, Texture, and Anisotropy of Ti‐3Al‐2.5 V Cold Pilgered Tubes

J. Fundenberger, F. Wagner, N. Bozzolo, 2011 .

Nucleation Stage During IF Steel Recrystallization and Internal Misorientation Parameters

A. Rollett, F. Wagner, A. Ayad, 2016 .

Sequential double extension twinning in a magnesium alloy: Combined statistical and micromechanical analyses

F. Wagner, L. Capolungo, Zhang-Zhi Shi, 2015 .

RELATIONS BETWEEN TEXTURE AND ANISOTROPIC PROPERTIES SOME APPLICATIONS TO LOW SYMMETRY MATERIALS

M. Philippe, F. Wagner, C. Esling, 1991 .

Simulating Epitaxial Textures

F. Wagner, Laurence Lamm, D. Deparis, 1995 .

Preparation of data from EBSD measurements for cellular automaton modeling of annealing phenomena in hexagonal materials

F. Wagner, N. Bozzolo, K. Sztwiertnia, 2006 .

Development of preferred orientation in plane strain deformed limestone: Experiment and theory

P. Houtte, H. Wenk, F. Wagner, 1982 .

Quantifying primary recrystallization from EBSD maps of partially recrystallized states of an IF steel

A. Rollett, F. Wagner, A. Ayad, 2020 .

Comparison of Gradients in Orientation and Stress between Experiment and Simulation

A. Rollett, R. Lebensohn, F. Wagner, 2011 .

On the Use of EBSD to Study the Heterogeneity of Plastic Deformation

F. Wagner, D. Field, S. Berbenni, 2011 .

Recrystallization of coherent nanolamellar structures in Ti48Al2Cr2Nb intermetallic alloy

F. Wagner, E. Bouzy, J. Guyon, 2016 .

Recrystallisation Behavior of Cold Rolled Zr702: Influence of Rolling Direction and Thickness Reduction

F. Wagner, N. Bozzolo, F. Gerspach, 2007 .

Experimental Investigations of Recrystallization Texture Development in Zirconium (Zr702)

F. Wagner, N. Bozzolo, P. Barbéris, 2004 .

Textures in HCP Titanium and Zirconium: Influence of Twinning

F. Wagner, N. Bozzolo, 2008 .

Grain Boundary Character Evolution during Grain Growth in a Zr Alloy

A. Rollett, F. Wagner, N. Bozzolo, 2007 .

On the Roles of Grain Size Dispersion and Microscale Hall–Petch Relation on the Plastic Behavior of Polycrystalline Metals

F. Wagner, S. Berbenni, N. Allain-Bonasso, 2014 .

Automatic correlation of grains from two different EBSD maps

F. Wagner, S. Berbenni, N. Allain-Bonasso, 2011 .

Phase transformations and inherited lattice preferred orientations: implications for seismic properties

D. Mainprice, F. Wagner, M. Humbert, 1990 .

On-line Texture Analysis for Magnetic Property Control

H. Bunge, F. Wagner, H. Kopineck, 1989 .

Computer Aided Optimization of an On-line Texture Analyzer

H. Bunge, F. Wagner, H. Kopineck, 1989 .

About the combined role of texture and grain size on hardening behavior of cp titanium sheets

F. Wagner, L. Toth, C. Chen, 2018, IOP Conference Series: Materials Science and Engineering.

Primary recrystallization in an ODS FeAl alloy: an effective way to modify texture and microstructure

F. Wagner, E. Suzon, T. Grosdidier, 2004 .

Evolution of recrystallisation texture and microstructure in low alloyed titanium sheets

F. Wagner, T. Grosdidier, N. Bozzolo, 2002 .

Modelling of texture evolution for materials of hexagonal symmetry. I: Application to zinc alloys

M. Philippe, F. Wagner, C. Esling, 1994 .

On the selection of extension twin variants with low Schmid factors in a deformed Mg alloy

F. Wagner, L. Capolungo, Zhang-Zhi Shi, 2015 .

PHASE TRANSFORMATIONS AND INHERITED ODFs IMPLICATIONS FOR PETROPHYSICAL PROPERTIES

D. Mainprice, F. Wagner, M. Humbert, 1991 .

A new way to include the grain shape in texture simulations with the Taylor model

P. Houtte, H. Bunge, F. Wagner, 1985 .

Determination of the Orientation of a Parent β Grain from the Orientations of the Inherited α Plates in the Phase Transformation from Body-Centred Cubic to Hexagonal Close Packed

Michel Humbert, Claude Esling, Hassan Moustahfid, 1995 .

Microstructure and microtexture of highly cold-rolled commercially pure titanium

H. Wenk, F. Wagner, N. Bozzolo, 2007 .

Texture and microstructure in very fine grain Al–Al3Ti alloys obtained by extrusion of mechanically alloyed powders

F. Wagner, T. Grosdidier, K. Helming, 2001 .

Stress–strain response of textured AZ31B magnesium alloy under uniaxial tension at the different strain rates

F. Wagner, C. Esling, Yandong Wang, 2013 .

Ductility enhancement of extruded magnesium via yttrium addition

Y. H. Zhao, F. Wagner, C. Esling, 2010 .

Fragmentation of large grains in AZ31 magnesium alloy during ECAE via route A

F. Wagner, C. Esling, X. Du, 2010 .

The quasi-static mechanical properties of extruded binary Mg–Er alloys

F. Wagner, C. Esling, X. Du, 2013 .

Static recrystallisation in an ODS FeAl alloy: The effect of particles on texture and anisotropic grain growth developments

Sofiane Guessasma, Thierry Grosdidier, S. Guessasma, 2008 .

Evaluation of the high temperature texture of the β phase of a TA6V sample from the individual orientations of grains of the low temperature α phase

M. Philippe, F. Wagner, M. Humbert, 1994 .

Novel Reaction-Based Processing of Co-Continuous Ceramic-Metal Composites

F. Wagner, R. Janssen, N. Claussen, 1996 .

Study on Evolution of Partial Texture of Different Grains during Grain Growth in IF Steels

F. Wagner, L. Zuo, W. Tong, 2010 .

Combined Effects of Texture and Grain Size Distribution on the Tensile Behavior of α-Titanium

F. Wagner, L. Toth, T. Richeton, 2018, Materials.

X-ray characterisation of size, strain and texture inhomogeneities in ultra fine grained copper processed by equal channel angular extrusion

F. Wagner, A. Tidu, T. Grosdidier, 2000 .

Dislocation Density Based Crystal Plasticity Finite Element Model of Polycrystals with Grain Boundary Effect

F. Wagner, A. Alankar, Zhe Leng, 2013 .

Influence of atomised powder characteristics on texture and microstructure development in extruded Al-8Fe-4Ni base alloys

J. Fundenberger, F. Wagner, T. Grosdidier, 1999 .

Influence of Deformation Substructures on the Early Mechanisms of Recrystallization in Cold-Rolled Titanium and Zirconium

F. Wagner, N. Bozzolo, N. Dewobroto, 2005 .

On the Use of Texture Analysis and Orientation Stereology to Investigate Polycrystalline Materials

M. Philippe, F. Wagner, C. Esling, 2005 .

Grain Growth Texture Evolution in Zirconium (Zr702) and Commercially Pure Titanium (T40)

F. Wagner, T. Grosdidier, N. Bozzolo, 2004 .

Graded Al2O3/Aluminide Bodies: Processing and Microstructure

F. Wagner, R. Janssen, N. Claussen, 1999 .

Coupled effects of grain size distributions and crystallographic textures on the plastic behaviour of IF steels

M. Berveiller, F. Wagner, X. Lemoine, 2011 .

Recrystallization Textures in some Hexagonal Alloys

F. Wagner, T. Grosdidier, N. Bozzolo, 2002 .

Improving Mechanical Properties of cp Titanium by Heat Treatment Optimization

F. Wagner, L. Toth, T. Richeton, 2018 .

Accelerated Potts model for grain growth – Application to an IF steel

A. Rollett, F. Wagner, A. Ayad, 2013 .

About texture stability during primary recrystallization of cold-rolled low alloyed zirconium

F. Wagner, N. Bozzolo, F. Gerspach, 2009 .

Evaluation of the High Temperature ß Texture of a Sample of TA6V from Individual Orientation Measurements of Plates of the α Phase at Room Temperature

M. Philippe, F. Wagner, M. Humbert, 1994 .

Accuracy of orientation distribution function determination based on EBSD data‐A case study of a recrystallized low alloyed Zr sheet

F. Wagner, N. Bozzolo, N Bozzolo, 2007, Journal of microscopy.

Primary twinning selection with respect to orientation of deformed grains in ultra-rapidly compressed AZ31 alloy

F. Wagner, C. Esling, M. Humbert, 2012 .

Comparison of Simulated and Experimental Deformation Textures for BCC Metals

P. Houtte, A. Molinari, F. Wagner, 1991 .

Grain Orientation Spread Values in if Steels after Plastic Deformation and Recrystallization

F. Wagner, A. Ayad, N. Rouag, 2011 .

Texture representation of deformed dolomite rocks

H. Bunge, H. Wenk, F. Wagner, 1981 .

Importance of odd coefficients in texture calculations for trigonal–triclinic symmetries

H. Bunge, H. Wenk, F. Wagner, 1981 .

Modeling the Evolution of Orientation Distribution Functions during Grain Growth of some Ti and Zr Alloys

A. Rollett, F. Wagner, N. Bozzolo, 2007 .

Texture Determination by Using X ray Diffraction

F. Wagner, 1999 .

Low cycle fatigue behavior of the textured AZ31B magnesium alloy under the asymmetrical loading

F. Wagner, C. Esling, Yandong Wang, 2013 .