I. Ahuja

发表

Total quality management implementation for reducing percent process defects in a manufacturing organisation

Inderpreet Singh Ahuja, I. Ahuja, 2012 .

Total productive maintenance practices in manufacturing organisations: literature review

Inderpreet Singh Ahuja, I. Ahuja, 2011 .

Influence of cutting parameters on tool wear and surface roughness in hard turning of AISI H11 tool steel using ceramic tools

Inderpreet Singh Ahuja, Sanjeev Saini, Vishal S. Sharma, 2012 .

Strategies and success factors for overcoming challenges in TPM implementation in Indian manufacturing industry

Inderpreet Singh Ahuja, J. S. Khamba, I. Ahuja, 2008 .

Exploring the impact of effectiveness of total productive maintenance strategies in manufacturing enterprise

I. Ahuja, 2012 .

An empirical examination of critical barriers in transitions between technology push and demand pull strategies in manufacturing organizations

I. Ahuja, A. Singla, A. Sethi, 2018 .

COMPARATIVE ANALYSIS OF TECHNOLOGY PUSH STRATEGIES INFLUENCING SUSTAINABLE DEVELOPMENT IN MANUFACTURING INDUSTRIES USING TOPSIS AND VIKOR TECHNIQUE

I. Ahuja, A. S. Sethi, A. Singla, 2018 .

An empirical examination of barriers to strategic flexibility in Indian manufacturing industries using analytical hierarchy process

J. S. Oberoi, I. Ahuja, Doordarshi Singh, 2013 .

Assessing strategic flexibility of manufacturing organisations using AHP

J. S. Oberoi, I. Ahuja, Doordarshi Singh, 2012 .

An evaluation of ISO 9000 initiatives in Indian industry for enhanced manufacturing performance

S. Jain, I. Ahuja, 2012 .

Examining the role of 5S practices as a facilitator of business excellence in manufacturing organizations

I. Ahuja, J. S. Randhawa, 2017 .

An evaluation of the synergic implementation of TQM and TPM paradigms on business performance

Kanwarpreet Singh, I. Ahuja, M. Kaur, 2012 .

Smart Thermoplastics for Maintenance and Repair of Heritage Structures

Rupinder Singh, I. Ahuja, Vinay Kumar, 2020 .

Joining of 3D Printed Dissimilar Thermoplastics With Friction Welding: A Case Study

Rupinder Singh, I. Ahuja, Ranvijay Kumar, 2019 .

Biocompatible Thermoplastic Composite Blended With HAp and CS for 3D Printing

Rupinder Singh, I. Ahuja, N. Ranjan, 2018 .

Justification of TQM–TPM implementations in manufacturing organisations using analytical hierarchy process: a decision-making approach under uncertainty

Inderpreet Singh Ahuja, Kanwarpreet Singh, Kanwarpreet Singh, 2012 .

An empirical investigation of dynamic capabilities in managing strategic flexibility in manufacturing organizations

Inderpreet Singh Ahuja, J. S. Oberoi, Jaspreet Singh Oberoi, 2013 .

Technology push and demand pull practices for achieving sustainable development in manufacturing industries

Inderpreet Singh Ahuja, Anuj Singla, Aps Sethi, 2018 .

Strategies and success factors for overcoming challenges in ISO 9000 implementation in Indian manufacturing industry

Inderpreet Singh Ahuja, Gurinder Singh, Gurinder Singh, 2013 .

Review of 5S methodology and its contributions towards manufacturing performance

I. Ahuja, Arashdeep Singh, 2015 .

Evolving the indigenous TPM methodology for the Indian manufacturing industry

Inderpreet Singh Ahuja, J. S. Khamba, I. Ahuja, 2009 .

Tpm: Total Productive Maintenance

I. Ahuja, I. P. S. Ahuja, 1990 .

Optimization of material removal rate in ultrasonic machining of polycarbonate bulletproof glass and acrylic heat-resistant glass by Taguchi method

I. Ahuja, K. Singh, Jathinder Kapoor, 2017 .

Chemical assisted ultrasonic machining of polycarbonate glass and optimization of process parameters by Taguchi and grey relational analysis

I. Ahuja, K. Singh, Jatinder Kapoor, 2017 .

Optimization of Process Parameters for Surface Roughness in Ultrasonic Machining of Polycarbonate Bullet Proof Glass and Acrylic Heat Resistant Glass by Taguchi and Grey Relational Analysis Approach

I. Ahuja, K. Singh, Jatinder Kapoor, 2017 .

Analytical hierarchy process for justification of JIT implementations in Indian manufacturing industries

Gurinder Singh, I. Ahuja, 2015 .

Justification of synergistic implementation of TQM–TPM paradigms using analytical hierarchy process

Kanwarpreet Singh, I. Ahuja, M. Kaur, 2015 .

Justification of total productive maintenance initiatives in Indian manufacturing industry for achieving core competitiveness

J. S. Khamba, I. Ahuja, 2008 .

Managing Research and Development for Core Competence Building in an Organization

I. Ahuja, 2011 .

On the Optimal Design of Metal Matrix Composites as Functionally Graded Innovative Materials for Sensor Devices

Narinder Singh, Rupinder Singh, I. Ahuja, 2019, Key Engineering Materials.

An evaluation of just in time (JIT) implementation on manufacturing performance in Indian industry

Inderpreet Singh Ahuja, Gurinder Singh, Gurinder Singh, 2014 .

Experimental investigations on hardness of the biomedical implants prepared by hybrid investment casting

Rupinder Singh, I. Ahuja, Parlad Kumar, 2016 .

5 S implementation methodologies : literature review and directions 49

I. Ahuja, J. S. Randhawa, 2016 .

Evaluating impact of 5S implementation on business performance

I. Ahuja, J. S. Randhawa, 2017 .

Assessing the business performance measurements for transfusion of TQM and TPM initiatives in the Indian manufacturing industry

Kanwarpreet Singh, I. Ahuja, 2014 .

Realising quality assurance in Indian technical education

I. Ahuja, 2012 .

An evaluation of impact of technology upgradations on manufacturing performance

I. Ahuja, 2014 .

Shifts Between Technology Push and Market Pull Strategies for Sustainable Development in Manufacturing Industries

I. Ahuja, A. S. Sethi, A. Singla, 2018 .

Investigations for Metal Matrix Composites Prepared by Using Waste Polymer-Based Sacrificial Rapid Pattern in Investment Casting

Narinder Singh, Rupinder Singh, I. Ahuja, 2014 .

Evaluating the contributions of total productive maintenance on manufacturing performance

I. Ahuja, U. Singh, 2015 .

On Wear Properties of Mechanical Blended and Chemical Assisted Mechanical Blended ABS-Graphene Reinforced Composites

Rupinder Singh, I. Ahuja, Vinay Kumar, 2021, Reference Module in Materials Science and Materials Engineering.

Joining of Thermoplastics With Friction Stir Welding for Minor Repair

Rupinder Singh, I. Ahuja, Ranvijay Kumar, 2020 .

Friction Stir Welding of Three-Dimensional Printed Polymer Composites with Semi-consumable Tool

Rupinder Singh, I. Ahuja, Ranvijay Kumar, 2019, Lecture Notes on Multidisciplinary Industrial Engineering.

Joining of 3D Printed Dissimilar Thermoplastics With Nonconsumable Tool Through Friction Stir Welding: A Case Study

Rupinder Singh, I. Ahuja, Ranvijay Kumar, 2019 .

Wear properties of rapid tooling prepared by reinforcement of SiC/Al2O3 in HDPE domestic waste

Sunpreet Singh, Rupinder Singh, I. Ahuja, 2020 .

Waste management by recycling of polymers with reinforcement of metal powder

Fernando Fraternali, Francesco Fabbrocino, Rupinder Singh, 2016 .

Thermal Analysis for Joining of Dissimilar Polymeric Materials Through Friction Stir Welding

Rupinder Singh, I. Ahuja, Ranvijay Kumar, 2014 .

Thermomechanical investigations of SiC and Al2O3–reinforced HDPE

Rupinder Singh, Narinder Singh, Narinder Singh, 2018, Journal of Thermoplastic Composite Materials.

An examination of effectiveness of technology push strategies for achieving sustainable development in manufacturing industries

Inderpreet Singh Ahuja, Anuj Singla, Amanpreet Singh Sethi, 2019, Journal of Science and Technology Policy Management.

A case study of total productive maintenance implementation at precision tube mills

Inderpreet Singh Ahuja, Pankaj Kumar, I. Ahuja, 2009 .

Modelling the effects of cutting parameters on residual stresses in hard turning of AISI H11 tool steel

Inderpreet Singh Ahuja, Sanjeev Saini, Vishal S. Sharma, 2013 .

Ultrasonic, chemical-assisted ultrasonic and rotary ultrasonic machining of glass: a review paper

I. Ahuja, K. Singh, Jatinder Kapoor, 2018, World Journal of Engineering.

Multi-response Analysis of Chemical Assisted Ultrasonic Machining of UL-752 and BS-476 Glass by GRA approach

I. Ahuja, K. Singh, Jatinder Kapoor, 2017 .

Comparison of Mechanical Blended and Chemical Assisted Mechanical Blended ABS-Graphene Reinforced Composite for 3D Printing Applications

Rupinder Singh, I. Ahuja, Vinay Kumar, 2021 .

Experimental Investigations for Friction Stir Welded 3D Printed Dissimilar Thermoplastics With Consumable Tool

Rupinder Singh, I. Ahuja, Ranvijay Kumar, 2019 .

Residual Stresses, Surface Roughness, and Tool Wear in Hard Turning: A Comprehensive Review

Inderpreet Singh Ahuja, Sanjeev Saini, Vishal S. Sharma, 2012 .

Effectiveness of TPM implementation with and without integration with TQM in Indian manufacturing industries

Inderpreet Singh Ahuja, Kanwarpreet Singh, Kanwarpreet Singh, 2014 .

Total productive maintenance: literature review and directions

J. S. Khamba, Inderpreet Singh Ahuja, I. Ahuja, 2008 .

ISO 9000 Quality Management System: literature review and directions

S. Jain, I. Ahuja, 2012 .

An examination of effectiveness of demand pull practices for accomplishing sustainable development in manufacturing industries

Inderpreet Singh Ahuja, Anuj Singla, Amanpreet Singh Sethi, 2017 .

An evaluation of TPM initiatives in Indian industry for enhanced manufacturing performance

Inderpreet Singh Ahuja, J. S. Khamba, I. Ahuja, 2008 .

A Comprehensive Study for 3D Printing of Rapid Tooling From Reinforced Waste Thermoplastics

Rupinder Singh, I. Ahuja, P. Bedi, 2018 .

Transfusion of Total Quality Management and Total Productive Maintenance: a literature review

Inderpreet Singh Ahuja, Kanwarpreet Singh, Kanwarpreet Singh, 2012 .

A Conceptual Framework for Achieving Flexibility at Strategic Level in Large- and Medium-Scale Indian Manufacturing Organizations

J. S. Oberoi, I. Ahuja, Doordarshi Singh, 2015 .

Execution of rapid prototyping technology – an Indian manufacturing industry’s perspective

Rajesh Kumar, Rupinder Singh, Inderpreet Singh Ahuja, 2013 .

Design of an intelligent decision-making system for maintenance practices using fuzzy inference system in northern Indian SMEs

Inderpreet Singh Ahuja, Kanwarpreet Singh, Simranjit Singh Sidhu, 2020 .

An empirical investigation of maintenance practices for enhancing manufacturing performance in small and medium enterprises of northern India

Kanwarpreet Singh, I. Ahuja, S. Sidhu, 2021 .

Evaluating manufacturing performance through strategic total productive maintenance implementation in a food processing industry

Inderpreet Singh Ahuja, I. Ahuja, T. Singh, 2017 .

Total productive maintenance: a tool for envisaging manufacturing competence

Inderpreet Singh Ahuja, I. Ahuja, Pragat Singh, 2013 .

5S – a quality improvement tool for sustainable performance: literature review and directions

Inderpreet Singh Ahuja, Jugraj Singh Randhawa, I. Ahuja, 2017 .

Just-in-time manufacturing: literature review and directions

Inderpreet Singh Ahuja, Gurinder Singh, Gurinder Singh, 2012 .

An evaluation of transfusion of TQM-TPM implementation initiative in an Indian manufacturing industry

Inderpreet Singh Ahuja, Kanwarpreet Singh, Kanwarpreet Singh, 2015 .

Selection of performance measure in JIT through fuzzy logic-based simulation

Inderpreet Singh Ahuja, Gurinder Singh, Gurinder Singh, 2015 .

Development of HAp Reinforced Biodegradable Porous Structure Through Polymer Deposition Technology for Tissue Engineering Applications

Rupinder Singh, I. Ahuja, N. Ranjan, 2018 .

Application of fusion deposition modelling for rapid investment casting – a review

Inderpreet Singh Ahuja, Rupinder Singh, Parlad Kumar, 2012 .

Development and Implementation of Autonomous Quality Management System (AQMS) in an Automotive Manufacturing using Quality 4.0 Concept- A Case Study

Harwinder Singh, I. Ahuja, Amandeep Singh, 2022, Comput. Ind. Eng..

An assessment of maintenance management initiatives in the Indian manufacturing industry

Inderpreet Singh Ahuja, J. S. Khamba, I. Ahuja, 2008 .

Ranking of implementation dimensions for maintenance practices in Northern Indian SMEs using integrated AHP-TOPSIS approach

Inderpreet Singh Ahuja, Kanwarpreet Singh, Simranjit Singh Sidhu, 2020, Journal of Small Business & Entrepreneurship.

Application of analytical hierarchy process for justification of ISO 9000 implementation in manufacturing organisations

Inderpreet Singh Ahuja, Sanjiv Kumar Jain, S. Jain, 2012 .

An evaluation of TPM implementation initiatives in an Indian manufacturing enterprise

Inderpreet Singh Ahuja, J. S. Khamba, I. Ahuja, 2007 .

Grey Relational Analysis of Chemical Assisted USM of Polycarbonate Bullet Proof (UL-752) & Acrylic Heat Resistant (BS-476) Glass

I. Ahuja, K. Singh, Jatinder Kapoor, 2017 .

Structural equation modeling for validating impact of 5S implementation on business excellence of manufacturing organizations

Inderpreet Singh Ahuja, Jugraj Singh Randhawa, I. Ahuja, 2017 .

Synergistic suitability of transfusion of TQM-TPM for Indian manufacturing industries using fuzzy-based model simulation

Inderpreet Singh Ahuja, Kanwarpreet Singh, Kanwarpreet Singh, 2013 .

Quality assurance in technical education system through TQM paradigm

Inderpreet Singh Ahuja, I. Ahuja, 2011 .

Polymer Single-Screw Extrusion With Metal Powder Reinforcement

Rupinder Singh, I. Ahuja, N. Singh, 2014 .

Investigation of manufacturing performance achievements through strategic total productive maintenance initiatives

Inderpreet Singh Ahuja, J. S. Khamba, I. Ahuja, 2009 .