J. Yan

发表

Numerical analysis on the bearing mechanism of branch tunnel in upper softer and lower hard ground

Y. Li, Y. M. Xiao, Y. Qiao, 2021, IOP Conference Series: Earth and Environmental Science.

Influence of high temperature annealing on the structure, hardness and tribological properties of diamond-like carbon and TiAlSiCN nanocomposite coatings

X. F. Wang, Li Huang, J. Yan, 2011 .

Ultrasonic Soldering Aluminum at Low Temperature Strength and elongation of soldered joints can be improved with tin-based solder containing zinc

J. Yan, X. Leng, BY W. B. Guo, 2015 .

The Dissolution Mechanism of Copper Weld Brazing with Cu-Based Brazing Alloys

Yi Nan Li, J. Yan, Z. L. Peng, 2011 .

Effects of coating pressure on the thermal and mechanical properties of glow discharge polymer films

Liangchi Zhang, J. Yan, J. J. Wei, 2011 .

Influence of oxidation on the structural and mechanical properties of TiAlSiN coatings synthesized by multi-plasma immersion ion implantation and deposition

J. Yan, Xiuheng Wang, Z. Xie, 2012 .

Microstructure and tribological properties of diamond-like carbon and TiAlSiCN nanocomposite coatings

J. Yan, Xiuheng Wang, Z. Xie, 2011 .

Influence of Si content on structure and mechanical properties of TiAlSiN coatings deposited by multi-plasma immersion ion implantation and deposition

J. Yan, Xiaofeng Wang, Z. Xie, 2011 .

Time-Economic Lifetime Assessment for High Performance Thermal Barrier Coating Systems

B. Baufeld, J. Yan, T. Leist, 2007 .

Effect of intermetallic compounds on heat resistance of hot roll bonded titanium alloy–stainless steel transition joint

J. Yan, Yu-jun Liu, Dong-sheng Zhao, 2013 .

Capillary filling process during ultrasonically brazing of aluminium matrix composites

W. Yang, J. Yan, S. Q. Yang, 2008 .

Vacuum hot roll bonding of titanium alloy and stainless steel using nickel interlayer

J. Yan, D. S. Zhao, S. Q. Yang, 2009 .

Improvement of the wear and corrosion resistance of oil pump materials using plasma immersion ion implantation

P. Chu, J. Yan, B. Tang, 1998 .

Ultrasonic brazing of high fraction volume of SiC particulate reinforced aluminium matrix composites

J. Yan, Q. Wu, Yong Zhang, 2009 .

Magnetostriction of Tb–Dy–Fe alloy with different crystal axes orientation

J. Yan, S. Q. Yang, S. He, 2001 .

Microstructure and mechanical performance of GTA weld brazed joints of copper thick plates

J. Yan, Yunhuai Zhang, Y. Li, 2007 .

Weld brazing of copper thick plates

J. Yan, Y. Zhang, S. Q. Yang, 2006 .

3D polymer nanostructures fabrication by AFM tip-based single scanning with a harder cantilever

Xuesen Zhao, J. Yan, Yongda Yan, 2012 .

An alignment evaluation method for polycrystalline Terfenol-D based on magnetostriction effect

J. Yan, S. Q. Yang, S. He, 2001 .

Study on the nano machining process with a vibrating AFM tip on the polymer surface

Shen Dong, Yongda Yan, Xuesen Zhao, 2012 .

Vibration assisted brazing of SiCp/A356 composites: Microstructure and mechanical behaviour

J. Yan, L. Shi, S. Q. Yang, 2008 .

Interfacial structure and mechanical properties of hot roll bonded joints between titanium alloy and stainless steel using copper interlayer

J. Yan, D. S. Zhao, S. Q. Yang, 2008 .