X. Margot

发表

A one-dimensional modeling study on the effect of advanced insulation coatings on internal combustion engine efficiency

P. Olmeda, A. Broatch, X. Margot, 2020, International Journal of Engine Research.

Numerical simulations for evaluating the impact of advanced insulation coatings on H2 additivated gasoline lean combustion in a turbocharged spark-ignited engine

P. Olmeda, A. Broatch, X. Margot, 2019, Applied Thermal Engineering.

Potential of flow pre-whirl at the compressor inlet of automotive engine turbochargers to enlarge surge margin and overcome packaging limitations

H. Kindl, J. Galindo, X. Margot, 2007 .

Local flow measurements in a turbocharger compressor inlet

A. Torregrosa, A. Broatch, X. Margot, 2017 .

CFD−Phenomenological Diesel Spray Analysis under Evaporative Conditions

J. M. Pastor, J. Desantes, X. Margot, 2009 .

Computational Study of Heat Transfer to the Walls of a DI Diesel Engine

X. Margot, A. Gil, Francisco Payri, 2005 .

Conjugate heat transfer study of the impact of ‘thermo-swing’ coatings on internal combustion engines heat losses

P. Olmeda, A. Broatch, X. Margot, 2020 .

Influence of the injection conditions and load on the combustion chamber resonance in DI Automotive Diesel Engines

A. Broatch, X. Margot, Antonio J. Gil, 2005 .

New approach to study the heat transfer in internal combustion engines by 3D modelling

P. Olmeda, A. Broatch, X. Margot, 2019, International Journal of Thermal Sciences.

Impact of the injector design on the combustion noise of gasoline partially premixed combustion in a 2-stroke engine

Ricardo Novella, Alberto Broatch, X. Margot, 2017 .

Numerical approach to define a thermodynamically equivalent material for the conjugate heat transfer simulation of very thin coating layers

P. Olmeda, X. Margot, J. Escalona, 2020 .

A generalized methodology for lithium-ion cells characterization and lumped electro-thermal modelling

P. Olmeda, A. Broatch, X. Margot, 2022, Applied Thermal Engineering.

Influence of Nozzle Geometry on Spray Shape, Particle Size, Spray Velocity and Air Entrainment of High Pressure Diesel Spray

J. Blaisot, A. Cessou, X. Margot, 2010 .

Evaluation of the Eulerian-Lagrangian Spray Atomization (ELSA) model in spray simulations: 2D cases

Sergio Hoyas, Antonio Gil, Xandra Margot, 2013, Math. Comput. Model..

CFD modeling of the in-cylinder flow in direct-injection Diesel engines

X. Margot, A. Gil, Jesús Benajes, 2004 .

Validation and Analysis of Heat Losses Prediction Using Conjugate Heat Transfer Simulation for an Internal Combustion Engine

A. Broatch, X. Margot, J. García-Tíscar, 2019, SAE technical paper series.

Implementation of 1D–3D integrated model for thermal prediction in internal combustion engines

X. Margot, J. Gomez-Soriano, J. Escalona, 2021, Applied Thermal Engineering.

Numerical Modelling of Cavitation: Validation and Parametric Studies

Sergio Hoyas, X. Margot, A. Gil, 2012 .

Methodology to estimate the threshold in-cylinder temperature for self-ignition of fuel during cold start of Diesel engines

Alberto Broatch, Santiago Ruiz, X. Margot, 2010 .

ANALYSIS OF THE CAVITATING FLOW IN REAL SIZE DIESEL INJECTORS WITH FIXED AND MOVING NEEDLE LIFT SIMULATIONS

X. Margot, P. Fajardo, S. Patouna, 2010 .

CFD Study of Needle Motion Influence on the Spray Conditions of Single-Hole Injectors

Sergio Hoyas, X. Margot, P. Fajardo, 2011 .

A CFD ANALYSIS OF THE INFLUENCE OF DIESEL NOZZLE GEOMETRY ON THE INCEPTION OF CAVITATION

V. Macián, Raul Payri, F. J. Salvador, 2003 .

Computational study on the deposition of ultrafine particles from Diesel exhaust aerosol

X. Margot, A. Gil, José M. Desantes, 2006 .

A Methodology to Estimate the Swirl Number at TDC In DI Diesel Engines: Through the Combination of CFD and Steady Flow Rig Results

X. Margot, A. Gil, José V. Pastor, 2004 .

THREE DIMENSIONAL CALCULATION OF THE FLOW IN A DI DIESEL ENGINE WITH VARIABLE SWIRL INTAKE PORTS

X. Margot, Jesús Benajes, José V. Pastor, 2001 .

Analytic-numerical approach to flow calculation in intake and exhaust systems of internal combustion engines

J. M. Arnau, X. Margot, J. Serrano, 2002 .

Combustion noise analysis of partially premixed combustion concept using gasoline fuel in a 2-stroke engine

Ricardo Novella, Alberto Broatch, X. Margot, 2016 .

A Numerical Study of the Influence of Diesel Nozzle Geometry on the Inner Cavitating Flow

Raul Payri, F. J. Salvador, X. Margot, 2002 .

Computational study of the sensitivity to ignition characteristics of the resonance in DI diesel engine combustion chambers

Alberto Broatch, X. Margot, A. Gil, 2007 .

A moving mesh generation strategy for solving an injector internal flow problem

Sergio Hoyas, Xandra Margot, Stavroula Patouna, 2010, Math. Comput. Model..

A CFD Study of the Effect of the Needle Movement on the Cavitation Pattern of Diesel Injectors

X. Margot, S. Patouna, F. Ravet, 2009 .

A combined 1D3D-CFD approach for reducing mesh dependency in Diesel spray calculations

José María García-Oliver, Xandra Margot, M. Chávez, 2011, Math. Comput. Model..

A Novel Methodology for the Definition of an Optimized Immersion Cooling Fluid by Means of a Lumped Electro-Thermal Battery Pack Model

P. Olmeda, A. Broatch, X. Margot, 2023, SAE Technical Paper Series.

Different strategies in an integrated thermal management system of a fuel cell electric bus under real driving cycles in winter

P. Olmeda, A. Broatch, X. Margot, 2023, Energy Conversion and Management.

A CFD APPROACH TO DIESEL ENGINE COMBUSTION CHAMBER RESONANCE

Alberto Broatch, X. Margot, A. Gil, 2007 .

A State of Health Estimation Technique based on a Temperature and Ah Throughput Dependency Model of the Capacity Fade

P. Olmeda, A. Broatch, X. Margot, 2023, SAE Technical Paper Series.

Energy analysis of a lithium-ion battery module for an e-bus application under different thermal boundaries

P. Olmeda, A. Broatch, X. Margot, 2023, Journal of Energy Storage.