J. Beniak

发表

P. Križan, M. Matúš, J. Beniak, 2014 .

Behavior of Beech Sawdust during Densification into a Solid Biofuel

P. Križan, J. Beniak, M. Matú, 2015 .

Obtaining and testing of metallic waste thermosetting powders with different grain sizes and components

J. Beniak, Ursan George-Andrei, Šooš Ľubomír, 2014, 2014 International Conference and Exposition on Electrical and Power Engineering (EPE).

Resistance and Strength of Conductive PLA Processed by FDM Additive Manufacturing

P. Križan, M. Matúš, J. Beniak, 2022, Polymers.

INVESTIGATION OF COCOA HUSKS DENSIFICATION POSSIBILITIES

P. Križan, M. Matúš, J. Beniak, 2022, International Journal of Research -GRANTHAALAYAH.

Relationship between Raw Material Composition and Pellets Physical Properties

P. Križan, M. Matúš, J. Beniak, 2019, IOP Conference Series: Materials Science and Engineering.

Research of interaction between technological and material parameters during densification of sunflower hulls

P. Križan, M. Matúš, J. Beniak, 2018 .

RELATIONSHIPS BETWEEN TECHNOLOGICAL AND MATERIAL PARAMETERS DURING DENSIFICATION OF CHERRY TREE SAWDUST

P. Križan, M. Matúš, J. Beniak, 2016 .

Influence of Densification Process and Material Properties on Final Briquettes Quality from Fast-Growing Willows

P. Križan, M. Matúš, J. Beniak, 2015 .

Relationship between technological and material parameters during densification of beech sawdust

P. Križan, M. Matúš, J. Beniak, 2015 .

Comparison of model materials for investment casting made by rapid prototyping

J. Beniak, Marko Bednárik, 2022 .

Differences in Age-distribution, Oncological Diagnoses and Stage in Roma and Non-Roma Cancer Patients Registered at the Outpatient Oncology Department Poprad in 2014 and 2015 - a Retrospective Study.

J. Beniak, M. Mego, M. Reckova, 2017, Klinicka onkologie : casopis Ceske a Slovenske onkologicke spolecnosti.

Application of mathematical modelling when determining the parameters effect of biomass densification process on solid biofuels quality

P. Križan, M. Matúš, J. Beniak, 2018 .

Influence of Raw Material Properties on Parameters of Injection Press during the Injection of Composites Based Biomass and Plastic Waste

P. Križan, M. Matúš, J. Beniak, 2020 .

Investigation of Wood Sawdust Effect on Production and Final Quality of Composite Pellets Based on Sunflower Husks

M. Matúš, J. Beniak, L. Soos, 2019, IOP Conference Series: Materials Science and Engineering.

Prevention of irinotecan induced diarrhea by probiotics: A randomized double blind, placebo controlled pilot study.

J. Beniak, M. Mego, D. Světlovská, 2015, Complementary therapies in medicine.

Experimental testing of PLA biodegradable thermoplastic in the frame of 3D printing FDM technology

Juraj Beniak, Miloš Matúš, Peter Križan, 2018 .

The role of transdermal buprenorphine in the treatment of cancer pain: an expert panel consensus

Juraj Beniak, Sebastiano Mercadante, J. Beniak, 2009, Current medical research and opinion.

HAY-PLASTIC COMPOSITES – EFFECT OF HAY PARTICLE SIZE ON THE WATER ABSORPTION

P. Križan, M. Matúš, J. Beniak, 2022, International Journal of Research -GRANTHAALAYAH.

Effect of wood particle size on the water absorption of wood-plastic composites

P. Križan, M. Matúš, J. Beniak, 2020 .

Treatment of hemodialyzed patient with sunitinib.

J. Beniak, M. Reckova, M. Kakalejčík, 2008, Annals of oncology : official journal of the European Society for Medical Oncology.

EFFECTS OF INITIAL MOISTURE CONTENT ON THE PRODUCTION AND QUALITY PROPERTIES OF SOLID BIOFUEL

P. Križan, M. Matúš, J. Beniak, 2015 .

The Chest Wall Tumor as a Rare Clinical Presentation of Hepatocellular Carcinoma Metastasis.

J. Beniak, M. Mego, J. Mardiak, 2019, Klinicka onkologie : casopis Ceske a Slovenske onkologicke spolecnosti.

The effect of papermaking sludge as an additive to biomass pellets on the final quality of the fuel

P. Križan, M. Matúš, J. Beniak, 2018 .

Research on Shape and Dimensional Accuracy of FDM Produced Parts

Juraj Beniak, Miloš Matúš, Peter Križan, 2019, IOP Conference Series: Materials Science and Engineering.

Autologous dendritic cell-based immunotherapy (DCVAC/LuCa) and carboplatin/paclitaxel in advanced non-small cell lung cancer: A randomized, open-label, phase I/II trial.

J. Beniak, L. Koubková, L. Havel, 2021, Cancer treatment and research communications.

THE INFLUENCE OF SIZE FRACTION ON THE COMPRESSIBILITY OF PINE SAWDUST AND THE EFFECTIVENESS CRITERION FOR DENSIFICATION

P. Križan, M. Matúš, J. Beniak, 2014 .

The Effectiveness Criterion for Densification of Wood Waste

P. Križan, M. Matúš, J. Beniak, 2016 .

Interaction between Technological and Material Parameters during Densification of Selected Types of Herbaceous Biomass

Michal Svátek, Juraj Beniak, Miloš Matúš, 2016 .

Determination of compacting pressure and pressing temperature impact on biomass briquettes density and their mutual interactions

P. Križan, M. Lisý, M. Matúš, 2014 .

Ribociclib Plus Letrozole in Patients with Hormone Receptor-positive, HER2-negative Advanced Breast Cancer with No Prior Endocrine Therapy: Subgroup Safety Analysis from The Phase 3b CompLEEment-1 Trial

J. Beniak, S. Borstnar, E. Gal-Yam, 2022, Radiology and oncology.

DESIGN THEORY FOR THE PRESSING CHAMBER IN THE SOLID BIOFUEL PRODUCTION PROCESS

Juraj Beniak, Miloš Matúš, Peter Križan, 2014 .

Accuracy of Rapid Prototyped Models with Using of FDM Technology

Juraj Beniak, Miloš Matúš, Peter Križan, 2014 .

THE OPERATING LOAD OF A DISINTEGRATION MACHINE

Juraj Beniak, Miloš Matúš, Peter Križan, 2014 .

Research on parameters optimization for the Additive Manufacturing process

Juraj Beniak, Miloš Matúš, Peter Križan, 2019, Transportation Research Procedia.

Implementation of AHP Methodology for the Evaluation and Selection Process of a Reverse Engineering Scanning System

P. Križan, M. Matúš, J. Beniak, 2021, Applied Sciences.