Anqi Zhang

发表

An Experimental Study of Flame Kernel Evolution in Lean and Diluted Methane-Air Mixtures at Engine-Like Conditions

Anqi Zhang, Jeffrey D. Naber, Seong-Young Lee, 2014 .

The Impact of Spark Discharge Pattern on Flame Initiation in a Turbulent Lean and Dilute Mixture in a Pressurized Combustion Vessel

Jeffrey Naber, Anqi Zhang, Michael Damian Czekala, 2013 .

Numerical investigation of nanosecond pulsed discharge in air at above-atmospheric pressures

Isaac W. Ekoto, L. Raja, T. Wallner, 2018, Journal of Physics D: Applied Physics.

EVALUATION OF JP-8 SURROGATE UNDER SPRAY DIESEL CONDITIONS USING DETAILED CHEMICAL KINETIC MODELS

J. Naber, Seong-Young Lee, Khanh Cung, 2013 .

SPRAY & LIQUID LENGTH CHARACTERISTICS OF TETRADECANE AS A SURROGATE IN COMPARISON TO JP-8

J. Naber, Seong-Young Lee, Khanh Cung, 2013 .

X-Ray Characterization of Real Fuel Sprays for Gasoline Direct Injection

K. Fezzaa, J. Ilavsky, A. Kastengren, 2020, Journal of Energy Resources Technology.

Computational fluid dynamics–guided engine combustion system design optimization using design of experiments

S. Som, P. Pal, Y. Pei, 2022, Artificial Intelligence and Data Driven Optimization of Internal Combustion Engines.

Simultaneous Shadowgraph/Mie Scattering Imaging of Liquid and Vapor Phases of Diesel Sprays and Validation of a Numerical Model

A. Montanaro, L. Allocca, U. Sorge, 2014 .

A Computational Investigation of Piston Bowl Geometry Effects on PPCI-Diffusion Combustion in a Light-Duty GCI Engine

M. Sellnau, Yu Zhang, Anqi Zhang, 2023, SAE Technical Paper Series.

CFD-Guided Evaluation of Spark-Assisted Gasoline Compression Ignition for Cold Idle Operation

M. Ameen, Y. Pei, Yu Zhang, 2021, Sustainability.

Development of a Hybrid Lagrangian–Eulerian Model to Describe Spark-Ignition Processes at Engine-Like Turbulent Flow Conditions

S. Som, T. Wallner, Xiucheng Zhu, 2018, Journal of Engineering for Gas Turbines and Power.

Numerical Investigation of Spark Ignition Events in Lean and Dilute Methane/Air Mixtures Using a Detailed Energy Deposition Model

J. Naber, T. Wallner, Seong-Young Lee, 2016 .

Experimental and Numerical Study of Flame Kernel Formation Processes of Propane-Air Mixture in a Pressurized Combustion Vessel

J. Naber, T. Lucchini, A. Onorati, 2016 .

Measurement of Diesel Spray Formation and Combustion upon Different Nozzle Geometry using Hybrid Imaging Technique

Luigi Allocca, Alessandro Montanaro, Jeffrey Naber, 2014 .

Multi-dimensional Modeling of Non-equilibrium Plasma for Automotive Applications

Isaac W. Ekoto, L. Raja, T. Wallner, 2018 .

Schlieren and Mie Scattering Visualization for Single-Hole Diesel Injector under Vaporizing Conditions with Numerical Validation

J. Naber, M. Migliaccio, A. Montanaro, 2014 .

Numerical Optimization of Spray-Guided Spark Assistance for Cold Idle Operation in a Heavy-Duty Gasoline Compression Ignition Engine

M. Ameen, Y. Pei, Yu Zhang, 2023, Energies.

Influence of the Nozzle Geometry of a Diesel Single-Hole Injector on Liquid and Vapor Phase Distributions at Engine-Like Conditions

J. Naber, A. Montanaro, Seong-Young Lee, 2013 .

Numerical Study on Emission Characteristics of High-Pressure Dimethyl Ether (DME) under Different Engine Ambient Conditions

Seong-Young Lee, Khanh Cung, Anqi Zhang, 2013 .

Statistical Quantification of Knock With Spark Ignition and Pre-Chamber Jet Ignition in a Light Duty Gasoline Engine

Andrew W. Baur, Anqi Zhang, Alexander Voice, 2020, ASME 2020 Internal Combustion Engine Division Fall Technical Conference.

The Impact of Pre-Chamber Design on Part Load Efficiency and Emissions of a Miller Cycle Light Duty Gasoline Engine

Andrew W. Baur, Anqi Zhang, Xin Yu, 2021 .