C. Cheung

发表

Combustion and Emission of a Compression Ignition Engine Fueled with Diesel and Hydrogen-Methane Mixture

C. Leung, J. H. Zhou, C. Cheung, 2013 .

Combustion, performance and emissions of a diesel engine with H2, CH4 and H2–CH4 addition

C. Leung, J. H. Zhou, C. Cheung, 2014 .

Combustion, performance and emissions of ULSD, PME and B50 fueled multi-cylinder diesel engine with naturally aspirated hydrogen

C. Leung, J. H. Zhou, C. Cheung, 2013 .

Influence of fumigation methanol on the combustion and particulate emissions of a diesel engine

Chun-de Yao, Zhi-hui Zhang, C. Cheung, 2013 .

Diesel–hydrogen dual-fuel combustion and its impact on unregulated gaseous emissions and particulate emissions under different engine loads and engine speeds

Wanzhong Zhao, Wanzhong Zhao, C. Leung, 2016 .

Heat transfer characteristics of an array of impinging pre-mixed slot flame jets

L. C. Kwok, C. W. Leung, C. Cheung, 2005 .

Effect of n-pentanol addition on the combustion, performance and emission characteristics of a direct-injection diesel engine

Liangjie Wei, Zuohua Huang, Zuo-hua Huang, 2014 .

Investigation on the coagulation and deposition of combustion particles in an enclosed chamber with and without stirring

C. Cheung, C. Leung, M. Schnell, 2006 .

Thermal and emission characteristics of a turbulent swirling inverse diffusion flame

C. Cheung, C. Leung, H. Zhen, 2010 .

Flame stability of rod stabilised premixed butane/air flames

C. Cheung, C. Leung, M. Drkos, 2009 .

A comparison of the emission and impingement heat transfer of LPG―H2 and CH4―H2 premixed flames

C. Leung, C. Cheung, Y. Choy, 2012 .

Tribology performance, airborne particle emissions and brake squeal noise of copper-free friction materials

Y. S. Choy, C. Cheung, L. Wei, 2020 .

Explosion characteristics of bio-syngas at various fuel compositions and dilutions in a confined vessel

Zuo-hua Huang, C. Cheung, Quan Zhou, 2020 .

Effects of fuel composition and initial pressure on laminar flame speed of H2/CO/CH4 bio-syngas

Zuo-hua Huang, C. Cheung, C. Leung, 2019, Fuel.

A study of brake contact pairs under different friction conditions with respect to characteristics of brake pad surfaces

Y. S. Choy, C. Cheung, L. Wei, 2019, Tribology International.

The effect of pentanol addition on the particulate emission characteristics of a biodiesel operated diesel engine

Zuo-hua Huang, Chenglong Tang, C. Cheung, 2017 .

Effect of hydrogen addition on overall pollutant emissions of inverse diffusion flame

Zuo-hua Huang, C. Cheung, J. Miao, 2016 .

Heat transfer from a turbulent swirling inverse diffusion flame to a flat surface

C. Cheung, C. Leung, H. Zhen, 2009 .

Heat transfer from an impinging premixed butane/air slot flame jet

C. Cheung, C. Leung, L. L. Dong, 2002 .

Heat transfer characteristics of an impinging premixed annular flame jet

C. Cheung, C. Leung, H. Zhen, 2012 .

Emission of impinging swirling and non-swirling inverse diffusion flames

C. Cheung, C. Leung, H. Zhen, 2011 .

Experimental investigation on the heat transfer of an impinging inverse diffusion flame

C. Leung, C. Cheung, T. Ng, 2007 .

Heat transfer of a row of three butane/air flame jets impinging on a flat plate

C. Leung, C. Cheung, L. L. Dong, 2003 .

Thermal and heat transfer behaviors of an inverse diffusion flame with induced swirl

H. Li, C. Cheung, C. Leung, 2013 .

Heat transfer characteristics of an impinging inverse diffusion flame jet. Part II: Impinging flame structure and impingement heat transfer

C. Cheung, C. Leung, L. L. Dong, 2007 .

Temperature distribution and heat transfer characteristics of an inverse diffusion flame with circumferentially arranged fuel ports

C. Cheung, C. Leung, L. Sze, 2004 .

Combustion characteristics of a swirling inverse diffusion flame upon oxygen content variation

C. Cheung, C. Leung, H. Zhen, 2011 .

Single-valued prediction of markers on heat release rate for laminar premixed biogas-hydrogen and methane-hydrogen flames

Zuo-hua Huang, C. Cheung, C. Leung, 2017 .

Coagulation of diesel particles in an enclosed chamber

C. Cheung, C. Leung, M. Schnell, 2004 .

Effects of unburned gases velocity on the CO/NO2/NOx formations and overall emissions of laminar premixed biogas-hydrogen impinging flame

Zuo-hua Huang, C. Cheung, C. Leung, 2020 .

Combustion characteristic and heating performance of stoichiometric biogas–hydrogen–air flame

Zuo-hua Huang, C. Cheung, C. Leung, 2016 .

Combustion optimization of a port-array inverse diffusion flame jet

C. Cheung, C. Leung, L. Dong, 2011 .

Appearance, temperature, and NOx emission of two inverse diffusion flames with different port design

C. Cheung, C. Leung, L. Sze, 2006 .

A comparison of the thermal, emission and heat transfer characteristics of swirl-stabilized premixed and inverse diffusion flames

C. Cheung, C. Leung, H. Zhen, 2011 .

Effects of diluents on laminar burning characteristics of bio-syngas at elevated pressure

Zuo-hua Huang, C. Cheung, Quan Zhou, 2019, Fuel.

Effects of H2 and CO2 addition on the heat transfer characteristics of laminar premixed biogas–hydrogen Bunsen flame

Zuo-hua Huang, C. Cheung, C. Leung, 2016 .

Modelling of NOx emissions in tangential coal fired boiler Part 1 – conventional boiler

C. S. Cheung, C. L. Lee, C L Lee, 2011 .

Modelling of NOx emissions in tangential coal fired boiler Part 2 – low NOx boiler

C. S. Cheung, C. L. Lee, C L Lee, 2011 .

Heat transfer characteristics of premixed butane/air flame jet impinging on an inclined flat surface

C. W. Leung, C. Cheung, C. Leung, 2002 .

Heat transfer characteristics of an impinging inverse diffusion flame jet -Part I: Free flame structure

C. Cheung, C. Leung, L. Dong, 2007 .

Characterization of impingement region from an impinging inverse diffusion flame jet

C. Cheung, C. Leung, L. Dong, 2013 .

Heat transfer optimization of an impinging port-array inverse diffusion flame jet

C. Cheung, C. Leung, L. Dong, 2013 .

A study on the effects of air preheat on the combustion and heat transfer characteristics of Bunsen flames

Zuo-hua Huang, C. Cheung, J. Miao, 2016 .

Characterization of biogas-hydrogen premixed flames using Bunsen burner

Zuo-hua Huang, C. Cheung, C. Leung, 2014 .

Heat transfer and wall pressure characteristics of a twin premixed butane/air flame jets

C. Cheung, C. Leung, L. Dong, 2004 .

Theoretical and experimental studies on air gap membrane distillation

C. W. Leung, C. Cheung, C. S. Cheung, 1998 .

Combustion, performance, regulated and unregulated emissions of a diesel engine with hydrogen addition

C. Leung, J. H. Zhou, C. Cheung, 2014 .

Effects of hydrogen addition on the characteristics of a biogas diffusion flame

C. Cheung, C. Leung, H. Zhen, 2013 .

A comparison of the heat transfer behaviors of biogas–H2 diffusion and premixed flames

C. Cheung, C. Leung, H. Zhen, 2014 .

Impact of intake hydrogen enrichment on morphology, structure and oxidation reactivity of diesel particulate

Wanzhong Zhao, Zhi Ning, Wanzhong Zhao, 2015 .

Effects of hydrogen concentration on the emission and heat transfer of a premixed LPG-hydrogen flame

C. Leung, C. Cheung, Y. Choy, 2012 .

Comparison of tribology performance, particle emissions and brake squeal noise between Cu-containing and Cu-free brake materials

Y. S. Choy, C. Cheung, H. Chu, 2021, Wear.

Effects of H2 addition on the formation and emissions of CO/NO2/NOx in the laminar premixed biogas-hydrogen flame undergoing the flame-wall interaction

Zuo-hua Huang, C. Cheung, C. Leung, 2020 .

Heat Transfer Characteristics of a Pair of Impinging Rectangular Flame Jets

C. W. Leung, C. Cheung, C. Leung, 2003 .

Ultrasonic stimulation on enhancement of air gap membrane distillation

C. W. Leung, C. Cheung, C. S. Cheung, 1999 .