A. Kumaraswamy

发表

Performance Analysis of a Dual Fuel Engine Using LPG and Diesel with EGR System

B. Durga Prasad, A. Kumaraswamy, B. Prasad, 2012 .

Numerical Modelling of Propagation of the Fundamental Symmetric Lamb Mode through a Metal Composite Adhesive Joint

A. Kumaraswamy, Lokanna Hoskoti, J. Babu, 2013 .

Constitutive Modeling of High-Temperature Flow Stress of Armor Steel in Ballistic Applications: A Comparative Study

A. Kumaraswamy, Ambuj Saxena, N. Kotkunde, 2019, Journal of Materials Engineering and Performance.

Parametric study of single confined fragment launch explosive device

K. D. Dhote, A. Kumaraswamy, Pankaj K. Choudha, 2019, Defence Technology.

Influence of SD effect on Johnson–Cook hardening constitutive material model: Numerical and experimental investigation for armor steel

A. Kumaraswamy, S. Dwivedi, Ambuj Saxena, 2020, Mechanics of Advanced Materials and Structures.

Investigation of Elasto-Plastic Deformation Behavior of Haynes242 Alloy Subjected to Nanoscale Loads Through Indentation Experiments

A. Kumaraswamy, B. Babu, B. A. Prasad, 2016, Transactions of the Indian Institute of Metals.

Effect of Indentation Size and Strain Rate on Nanomechanical Behavior of Ti-6Al-4VAlloy

A. Kumaraswamy, B. SridharBabu, B. AnjaneyaPrasad, 2015, Transactions of the Indian Institute of Metals.

Experimental Studies on Effect of Temperature and Strain Rate on Deformation Behaviour of Ti-6Al-4V Using Taguchi Method☆

A. Kumaraswamy, J. Babu, Abhijit Dutta, 2014 .

Utilisation of High Energy Propellant Waste in Manufacturing of Fired Clay Bricks to Enhance the Acoustic Properties

A. Kumaraswamy, V. Saraswat, P. Mehta, 2021, Defence Science Journal.

A Multilevel Boost Converter-Fed High-Frequency Resonant Inverter for Induction Heating by Using ADC Control

A. Kumaraswamy, P. Sadhu, Ananyo Bhattacharya, 2020 .

Flow Behaviour of Ti-6Al-4V Subjected to Multi Directional Isothermal Compression

A. Kumaraswamy, Abhijit Dutta, J. Babu, 2015, Transactions of the Indian Institute of Metals.

Prediction of material properties of propellant waste modified bricks through microstructures by Topographic independent component analysis coupled 3D Convolution neural networks

P. K. Mehta, A. Kumaraswamy, Vijayakumar Chinnadurai, 2022, Ceramics International.

Influence of reinforcements (SiC and Al2O3) and rotational speed on wear and mechanical properties of aluminum alloy 6061-T6 based surface hybrid composites produced via friction stir processing

A. Kumaraswamy, A. Kumar, A. Devaraju, 2013 .

Synthesis and characterisation of waste SAC- and RHA-reinforced aluminium-based composite

A. Kumaraswamy, S. Dwivedi, Ambuj Saxena, 2021 .

Assessment of Mechanical Properties of Aged Composite Propellant Using Non‐Destructive Indentation Technique in Solid Propellant Rocket Motor

M. Jain, A. Kumaraswamy, K. Murthy, 2022, Propellants, Explosives, Pyrotechnics.

Fabrication, Physicochemical Characterizations and Electrical Conductivity Studies of Modified Carbon Nanofiber-Reinforced Epoxy Composites: Effect of 1-Butyl-3-Methylimidazolium Tetrafluoroborate Ionic Liquid

A. Kumaraswamy, B. Kandasubramanian, N. Subramani, 2018 .

Experimental and computational investigation on dynamic fracture toughness (J) behavior of multi-pass SMA armor steel weldments

A. Kumaraswamy, S. Dwivedi, Ambuj Saxena, 2020 .

Microstructural Characterization and High Strain Rate Plastic Flow Behavior of SMAW Armox500T Steel Joints from Spherical Indentation Experiments

A. Kumaraswamy, Ambuj Saxena, V. Madhu, 2018, Journal of Materials Engineering and Performance.

Influence of welding consumables on tensile and impact properties of multi-pass SMAW Armox 500T steel joints vis-a-vis base metal

G. Reddy, A. Kumaraswamy, Ambuj Saxena, 2018, Defence Technology.

Study of Tribological Characteristics of Multi-pass SMAW Armox 500T Steel Joints

A. Kumaraswamy, Ambuj Saxena, V. Madhu, 2018, Journal of Materials Engineering and Performance.

High strain-rate plastic flow behavior of Ti–6Al–4V from dynamic indentation experiments

A. Kumaraswamy, V. V. Rao, 2011 .

Effect of temperature on constraint factor of Ti–6Al–4V under static indentation conditions

A. Kumaraswamy, B. Venkataraman, 2006 .

Effect of temperature on constraint factor of IN718 under static indentation conditions

A. Kumaraswamy, V. V. Rao, 2010 .

Effect of Pressure on Mechanical Properties of Composite Propellant

M. Jain, A. Kumaraswamy, B. Bihari, 2021 .

Analysis on Three Dimensional Flow of Direct-injection Diesel Engine for Different Piston Configuration using CFD

A. Kumaraswamy, G. Sucharitha, 2013 .

Use of LPG in A Dual Fuel Engine

A. Kumaraswamy, D. D. Prasad, 2012 .

Effect of shape of explosive charge in failure of rolled homogenous armour plate

G. G. Dutta, K. D. Dhote, A. Kumaraswamy, 2019, Procedia Structural Integrity.

Effect of Explosive Shapes (in Sand Buried Condition) on the Failure of a Circular Clamped Plate of Protective Vehicle

A. Kumaraswamy, V. Rao, Pankaj K. Choudha, 2022, Defence Science Journal.

Investigation of S-D effect on plastic flow behavior of Armox 500T steel

A. Kumaraswamy, Ambuj Saxena, M. Vemuri, 2018, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

Numerical Analysis of Effect of Friction on Mechanical Properties of Ti-6Al-4VAlloy Through Nanoindentation☆

A. Kumaraswamy, B. SridharBabu, B. AnjaneyaPrasad, 2013 .

Dual output direct AC–AC series resonant converter for all metal induction heating system with a hybrid control technique

A. Kumaraswamy, P. Sadhu, Ananyo Bhattacharya, 2023, Electrical Engineering.

A Numerical Approach to Investigate the Effect of Temperature on Constraint Factor of Ti Alloy Under Static Indentation Conditions

A. Kumaraswamy, Ambuj Saxena, Akshay Rai, 2017, Transactions of the Indian Institute of Metals.

Compensation of KVar and Controlling DC link Voltage using Fuzzy-based Grid-connected PV System with d-STATCOM

A Kumaraswamy, Kunta Srinivas, Moutam Swapna, 2017 .