A. Ompusunggu

发表

Effect of parameters setting on performance of discrete component removal ( DCR ) methods for bearing faults detection

D. Mba, B. Kilundu, A. Ompusunggu, 2014 .

Distinguishing the effects of adhesive wear and thermal degradation on the tribological characteristics of paper-based friction materials under dry environment: A theoretical study

Hendrik Van Brussel, Paul Sas, Agusmian Partogi Ompusunggu, 2015 .

Condition monitoring of wet friction clutches based on the relative velocity signal

Hendrik Van Brussel, Farid Al-Bender, Paul Sas, 2011 .

A practical approach to combine data mining and prognostics for improved predictive maintenance

Agusmian P. Ompusunggu, Steve Vandenplas, S. Vandenplas, 2009 .

Vibration Signal Tachometer Signal Data Quality Test Low-pass Filter Low-pass Filter Time Synchronous Averaging Band-pass Filter Kurtogram Fast Fourier Transform Envelope Spectrum Signal Pre-processing Residual Signal Est . Bandwidth Squared Envelope Signal Est . Signal Enhancement Demodulation Comp

Jay Lee, A. Ompusunggu, Zongchang Liu, 2014 .

Theoretical and Experimental Contact Stiffness Characterisation of Nominally Flat Surfaces

A. Ompusunggu, Iuliana Piscan, Thierry Janssens, 2012 .

Comparison of vibration and acoustic measurements for detection of bearing defects

K. Janssens, A. Ompusunggu, J. Cuenca, 2016 .

Condition monitoring of bearings under medium and low rotational speed

K. Janssens, A. Ompusunggu, J. Cuenca, 2016 .

Melt Pool Features Analysis Using a High Speed Coaxial Monitoring System for Laser Powder Bed Fusion of Ti-6Al-4V Grade 23

J. Kruth, M. Bayat, A. Witvrouw, 2021 .

Degradation effects on control strategy for wet friction clutches

Hendrik Van Brussel, Farid Al-Bender, Paul Sas, 2011 .

Review of corrosion monitoring and prognostics in offshore wind turbine structures: Current status and feasible approaches

R. Brijder, A. Ompusunggu, C. H. M. Hagen, 2022, Frontiers in Energy Research.

On Improving the Monotonicity-Based Evaluation Method For Selecting Features/Health Indicators for Prognostics

A. Ompusunggu, 2020, 2020 11th International Conference on Prognostics and System Health Management (PHM-2020 Jinan).

Condition monitoring of critical industrial assets using high performing low-cost MEMS accelerometers

A. Ompusunggu, Kerem Eryilmaz, Karel Janssen, 2021, Procedia CIRP.

Envelope Analysis on Vibration Signals for Stator Winding Fault Early Detection in 3-Phase Induction Motors

Agusmian P. Ompusunggu, Zongchang Liu, Jay Lee, 2020 .

Feedback on the Surveillance 8 challenge: Vibration-based diagnosis of a Safran aircraft engine

Alessandro Paolo Daga, Germán Castellanos-Domínguez, Agusmian Partogi Ompusunggu, 2017 .

Phase editing as a signal pre-processing step for automated bearing fault detection

Agusmian Partogi Ompusunggu, Andrew Hillis, L. Barbini, 2017 .

Cost-effective (non-contact) ultrasound system for bearing fault diagnostics: Development, Validation and Benchmark

A. Ompusunggu, T. A. Bartic, M. Sprengers, 2017 .

Melt pool feature analysis using a high-speed coaxial monitoring system for laser powder bed fusion of Ti-6Al-4 V grade 23

J. Kruth, M. Bayat, A. Witvrouw, 2022, The International Journal of Advanced Manufacturing Technology.

Condition-based maintenance for OEM’s by application of data mining and prediction techniques

Marc Engels, Abdellatif Bey-Temsamani, Andy Motten, 2010 .

A Semi-Supervised Approach with Monotonic Constraints for Improved Remaining Useful Life Estimation

Diego Nieves Avendano, D. Deschrijver, S. Hoecke, 2022, Sensors.

Health Assessment and Prognostics of Automotive Clutches

Hendrik Van Brussel, Paul Sas, Agusmian Partogi Ompusunggu, 2012 .

On improving low-cost IMU performance for online trajectory estimation

Abdellatif Bey-Temsamani, Risang Yudanto, Agusmian P. Ompusunggu, 2015, Microtechnologies for the New Millennium.

Detection, Prognosis and Decision Support Tool for Offshore Wind Turbine Structures

R. Brijder, A. Ompusunggu, Sandra Vásquez, 2022, Wind.

Modeling and analysis of wet friction clutch engagement dynamics

Wim Desmet, Farid Al-Bender, Agusmian Partogi Ompusunggu, 2015 .

Using a smartphone camera to analyse rotating and vibrating systems: Feedback on the SURVISHNO 2019 contest

Alessandro Paolo Daga, K. Billon, Q. Leclère, 2021 .

Wavelet Scattering Network Based Bearing Fault Detection

R. Brijder, A. Ompusunggu, T. Ooijevaar, 2021 .

Kalman-Filtering-Based Prognostics for Automatic Transmission Clutches

Steve Vandenplas, Agusmian Partogi Ompusunggu, Jean-Michel Papy, 2016, IEEE/ASME Transactions on Mechatronics.

A Convolutional Neural Network Aided Physical Model Improvement for AC Solenoid Valves Diagnosis

E. Hostens, S. Hoecke, A. Ompusunggu, 2019, 2019 Prognostics and System Health Management Conference (PHM-Paris).

An improved first-principle model of AC powered solenoid operated valves for maintenance applications.

E. Hostens, A. Ompusunggu, George Tod, 2022, ISA transactions.

Condition Monitoring Method for Automatic Transmission Clutches

Hendrik Van Brussel, Paul Sas, Agusmian Partogi Ompusunggu, 2020 .

2-Level error (drift) compensation for low-cost MEMS-based inertial measurement unit (IMU)

Abdellatif Bey-Temsamani, Agusmian Partogi Ompusunggu, A. Ompusunggu, 2016 .

2-Level error (drift) compensation for low-cost MEMS-based inertial measurement unit (IMU)

A. Ompusunggu, A. Bey-Temsamani, 2015, Microsystem Technologies.

Motion blur characterization and compensation for line scan (1D) cameras

Tinne Tuytelaars, Abdellatif Bey-Temsamani, Jose Oramas, 2017, Optical Metrology.