S. Kulkarni

发表

Application of multilevel scheme and two level discretization for POD based model order reduction of nonlinear transient heat transfer problems

Salil S. Kulkarni, A. K. Gaonkar, S. Kulkarni, 2015 .

Model order reduction for dynamic simulation of beams with forcing and geometric nonlinearities

Salil S. Kulkarni, A. K. Gaonkar, S. Kulkarni, 2013 .

Response of a linear viscoelastic splitter plate attached to a cylinder in laminar flow

M. Thompson, S. Kulkarni, R. Bhardwaj, 2019, Journal of Fluids and Structures.

Studies on the dynamics of a supercavitating projectile

R. Pratap, S. Kulkarni, 2000 .

Model order reduction for dynamic simulation of slender beams undergoing large rotations

A. K. Gaonkar, S. Kulkarni, S. S. Kulkarni, 2017 .

Intelligent Structural Health Management of Civil Infrastructure A Final

Brandon W. Strom, Gautam K. Naik, J. Achenbach, 2012 .

Vortex-induced vibration of a circular cylinder on a nonlinear viscoelastic support

M. Thompson, S. Kulkarni, R. Bhardwaj, 2021 .

Characterization of lubrication sensitivity on dynamic stability in high-speed micromilling of Ti–6Al–4V via a novel numerical scheme

R. Singh, S. Kulkarni, R. Mittal, 2018, International Journal of Mechanical Sciences.

Deformation bands, the LEDS theory, and their importance in texture development: Part I. Previous evidence and new observations

D. Kuhlmann-wilsdorf, J. Moore, S. Kulkarni, 1999 .

Some observations on deformation banding and correlated microstructures of two aluminum alloys compressed at different temperatures and strain rates

D. Kuhlmann-wilsdorf, S. Kulkarni, E. Starke, 1998 .

A Free Interface Component Mode Synthesis Approach for Determining the Micro-End Mill Dynamics

Kundan K. Singh, R. Singh, V. Kartik, 2018, Journal of Micro and Nano-Manufacturing.

Effect of Progressive Tool Wear on the Evolution of the Dynamic Stability Limits in High-Speed Micromilling of Ti-6Al-4V

R. Singh, C. Maheshwari, S. Kulkarni, 2019, Journal of Manufacturing Science and Engineering.

Manufacturing of Particulate Reinforced Aluminum Metal Matrix Composites using Stir Casting Process

S. Kulkarni, R. V. Adat, S. Kulkarni, 2015 .

Probabilistic considerations are essential to qnde and shm

Jan Drewes Achenbach, Salil S. Kulkarni, M. L. Cohen, 2009 .

Regularization of pattern formation in heteroepitaxial thin films through surface diffusivity modulation

S. Krishnaswamy, S. Kulkarni, Y. Kim, 2009 .

Application of an accelerated boundary-based mesh-free method to two-dimensional problems in potential theory

S. Mukherjee, S. Kulkarni, S. Telukunta, 2003 .

The Dirichlet problem for elliptic systems in multiconnected rough regions

S. Mukherjee, S. Kulkarni, I. Mitrea, 2005 .

A microstructure-based modeling approach to predict the mechanical properties of Zr alloy with hydride precipitates

Varun Gupta, S. Kulkarni, D. Senor, 2021 .

An ordinary state based peridynamic correspondence model for metal creep

Shank S. Kulkarni, A. Tabarraei, S. Kulkarni, 2020, Engineering Fracture Mechanics.

Application of the reciprocity theorem to determine line-load-generated surface waves on an inhomogeneous transversely isotropic half-space

J. Achenbach, S. Kulkarni, 2008 .

Determining cohesive parameters for modeling interfacial fracture in dissimilar-metal friction stir welded joints

Shank S. Kulkarni, Varun Gupta, S. Kulkarni, 2021 .

Effect of lubrication on machining response and dynamic instability in high-speed micromilling of Ti-6Al-4V ☆

R. Singh, S. Kulkarni, R. Mittal, 2017 .

Characterization of anti-abrasion and anti-friction coatings on micromachining response in high speed micromilling of Ti-6Al-4V

R. Singh, Praveen Kumar, H. Barshilia, 2018, Journal of Manufacturing Processes.

Total finite element tearing and interconnection method for computationally efficient micromechanical analysis

B. Gautham, S. Kulkarni, Nagesh H Kulkarni, 2021, Modelling and Simulation in Materials Science and Engineering.

Mechanics of wrinkling of a thin film bonded to a compliant substrate under the influence of spatial thermal modulation

Shrinidhi S. Pandurangi, S. Kulkarni, 2015 .

Machining Response and Damage Evolution of Amorphous Carbon Coated Tools in High-Speed Micromilling of Ti–6Al–4V

R. Singh, H. Barshilia, S. Kulkarni, 2020 .

Microstructure based modeling of friction stir welded joint of dissimilar metals using crystal plasticity

Varun Gupta, S. Kulkarni, D. Herling, 2021 .

S. Kulkarni, P. Upadhyay, H. Das, 2021 .

Transverse vortex-induced vibration of a circular cylinder on a viscoelastic support at low Reynolds number

M. Thompson, S. Kulkarni, A. K. Soti, 2020 .

An analytical study of wave propagation in a peridynamic bar with nonuniform discretization

Alireza Tabarraei, Shank S. Kulkarni, A. Tabarraei, 2017 .

Adiabatic Shear Band Formation in Metallic Glasses

S. Kulkarni, 2019, Metallic Glasses.

Multiple Degree of Freedom Rotordynamics based Stability Modeling in High-speed Micromilling of Ti-6Al-4V

R. Singh, S. Kulkarni, R. Mittal, 2018 .

Analytical and numerical solutions for thick beams with thermoelastic damping

D. N. Pawaskar, S. Kulkarni, Dileesh V. Parayil, 2015 .

Static and Dynamic Analysis of Electrostatically Actuated Microcantilevers Using the Spectral Element Method

D. N. Pawaskar, P. V. Dileesh, Salil S. Kulkarni, 2012 .

Local Solutions in Potential Theory and Linear Elasticity Using Monte Carlo Methods

S. Mukherjee, M. Grigoriu, S. Kulkarni, 2003 .

A path-independent integral for the characterization of solute concentration and flux at biofilm detachments

B. Moran, S. Kulkarni, H. Reeves, 2007 .

Numerical Methods and Computational Tools

Shyamprasad Karagadde, Atul Sharma, Amitabh Bhattacharya, 2017 .

Science with the Daksha high energy transients mission

S. K. Goyal, S. More, D. Mukherjee, 2022, Experimental Astronomy.

Daksha: On Alert for High Energy Transients

S. K. Goyal, A. Pai, A. Singhal, 2022, 2211.12055.

Random walk method for the two‐ and three‐dimensional Laplace, Poisson and Helmholtz's equations

Mircea Grigoriu, Subrata Mukherjee, Salil S. Kulkarni, 2001 .

Chaotic advection in a recirculating flow: Effect of a fluid multiple-flexible-solid interaction.

Atul S. Sharma, S. Kulkarni, V. Prasad, 2023, Chaos.

A generalized model for thermoelastic damping in beams with mid-plane stretching nonlinearity

S. Kulkarni, Dileesh V. Parayil, D. Pawaskar, 2018 .