I. Lloyd

发表

Temperature Measurements during Microwave Processing: The Significance of Thermocouple Effects

Isabel K. Lloyd, Yuval Carmel, Jeff Calame, 2004 .

Crack propagation across an adhesive interlayer in flexural loading

B. Lawn, I. Lloyd, H. Chai, 2007 .

Cyclic Damage in Lead Zirconate Titanate

Grady S. White, Isabel K. Lloyd, Michael D. Hill, 1996 .

Arrest, deflection, penetration and reinitiation of cracks in brittle layers across adhesive interlayers

B. Lawn, Yeon-Gil Jung, I. Lloyd, 2007 .

Materials Design of Ceramic-based Layer Structures for Crowns

E. D. Rekow, B. Lawn, I. Lloyd, 2002, Journal of dental research.

Microwave Processing of Ceramics

Y. Carmel, I. Lloyd, Geng-fu Xu, 2006 .

Sintering and characterization of alkaline-earth-doped and zirconium-defficient Na3Zr2Si2PO12

B. O. Hall, T. Gupta, I. Lloyd, 1983 .

Nasicon formation by chemical polymerization

I. Lloyd, B. E. Yoldas, 1983 .

Influence of microstructure and chemistry on the fracture toughness of dental ceramics.

J. Quinn, I. Lloyd, V. Sundar, 2003, Dental materials : official publication of the Academy of Dental Materials.

“EDGE TOUGHNESS” AND MATERIAL PROPERTIES RELATED TO THE MACHINING OF DENTAL CERAMICS

J. Quinn, I. Lloyd, L. Su, 2000 .

Time-dependent nanoindentation behavior of high elastic modulus dental resin composites

I. Lloyd, Yijun Wang, 2010 .

High modulus nanopowder reinforced dimethacrylate matrix composites for dental cement applications.

I. Lloyd, O. Wilson, V. Thompson, 2007, Journal of biomedical materials research. Part A.

Damage Characterization of Dental Materials in Ceramic-Based Crown-Like Layer Structures

B. Lawn, Yan Deng, I. Lloyd, 2002 .

Pore morphology in cryochemically prepared alumina powders and their sulphate precursors

I. Lloyd, R. J. Kovel, 1988 .

Short‐Crack Mechanical Properties and Failure Mechanisms of Si3N4‐Matrix/SiC‐Fiber Composites

I. Lloyd, C. Ostertag, H. Xu, 1994 .

Fracture resistance of SiC-fiber-reinforced Si3N4 composites at ambient and elevated temperatures

E. Fuller, I. Lloyd, C. Ostertag, 1995 .

Effect of temperature on the absorption loss of chalcogenide glass fibers.

I. Lloyd, J. Sanghera, V. Nguyen, 1999, Applied optics.

Effects of fiber volume fraction on mechanical properties of SiC-fiber/Si3N4-matrix composites

I. Lloyd, C. Ostertag, H. Xu, 1994 .

Effect of Remanent Polarization Level on Macrocrack Extension in Lead Zirconate Titanate (PZT)

I. Lloyd, G. White, M. Hill, 1996 .

Joining Veneers to Ceramic Cores and Dentition with Adhesive Interlayers

B. Lawn, I. Lloyd, Y. Wang, 2007, Journal of dental research.

Teaching Undergraduate and Graduate Students Results From Recent Research As Part of a Class

I. Lloyd, O. Wilson, L. Salamanca-Riba, 2001 .

The temperature dependence of ferroelectric imprint

R. Ramesh, I. Lloyd, J. Benedetto, 1995 .

Microwave sintering of high-density, high thermal conductivity AlN

Y. Carmel, I. Lloyd, O. Wilson, 2002 .

Upward migration of indwelling ureteral stents.

I. Lloyd, A. Bueschen, G. C. Oswalt, 1979, The Journal of urology.

Materials design in the performance of all-ceramic crowns.

Mariano A Polack, Yu Zhang, E. D. Rekow, 2004, Biomaterials.

Characterization of damage modes in dental ceramic bilayer structures.

B. Lawn, Yan Deng, I. Lloyd, 2002, Journal of biomedical materials research.

Investigation of the effect of host composition on the photoluminescent properties of Sr_xBa_1−xS doped with Eu and Sm

I. Lloyd, D. Brower, 1995 .

Alumina prepared from freeze-dried aluminum isopropoxide

I. Lloyd, Hsiao-Lan Chang, 1993 .

Microwave sintering of ZnO at ultra high heating rates

Y. Carmel, I. Lloyd, O. Wilson, 2001 .

Conductivity of Iron‐Doped Polycrystalline Alumina at High Temperatures

H. Bowen, I. Lloyd, T. Pollak, 1984 .

High Thermal Conductivity AIN Materials

I. Lloyd, 2010 .

Microwave sintering and properties of AlN/TiB_2 composites

Y. Carmel, I. Lloyd, O. Wilson, 2003 .

Oriented BSCCO thick film coatings on polycrystalline MgO

B. Das, I. Lloyd, M. Kahn, 1990 .

Ceramic “Machinability” ‐ What Does it Mean?

J. Quinn, G. Quinn, I. Lloyd, 2008 .

Design of Join Glass Composition for Layered All-Ceramic Restorations

E. D. Rekow, I. Lloyd, O. Wilson, 2011 .

Failure Modes of SiC‐Fiber/Si3N4‐Matrix Composites at Elevated Temperatures

R. Krause, I. Lloyd, C. Ostertag, 1995 .

Preparation of Orthorhombic Ba2YCu3O7 Powder by Single‐Step Calcining

I. Lloyd, M. Kahn, M. Chase, 1990 .

Comparison of Methods to Determine the Fracture Toughness of Three Glass‐Ceramics at Elevated Temperatures

J. Quinn, I. Lloyd, 2000 .

Iron Tracer Diffusion in Aluminum Oxide

H. Bowen, I. Lloyd, 1981 .

Phase behaviors of colloidal analogs of bent-core liquid crystals

I. Lloyd, Z. Nie, Zhong-yuan Lu, 2018, Science Advances.

Structural investigation of chalcogenide and chalcohalide glasses using Raman spectroscopy

J. Freitas, I. Lloyd, J. Sanghera, 1999 .

Strength and fractographic analysis of chalcogenide As-S-Se and Ge-As-Se-Te glass fibers

J. Quinn, I. Lloyd, J. Sanghera, 2003 .

Physical Properties of Chalcogenide and Chalcohalide Glasses

I. Lloyd, J. Sanghera, V. Nguyen, 2004 .

Modification of surface texture by grinding and polishing lead zirconate titanate ceramics

I. Lloyd, M. Kahn, Sichao Cheng, 1992 .

Determination of the polarization‐depth distribution in poled ferroelectric ceramics using thermal and pressure pulse techniques

Brian Dickens, Isabel K. Lloyd, Thierry Ditchi, 1992 .

Thermal Conductivity of Zinc Oxide: From Green to Sintered State

Stephen C. Smith, Y. Carmel, A. Birnboim, 2004 .

Scratch hardness and chipping of dental ceramics under different environments.

J. Quinn, I. Lloyd, O. Wilson, 2003, Dental materials : official publication of the Academy of Dental Materials.

Journal of Research of the National Institute of Standards and Technology

G. Quinn, I. Lloyd, P. Patel, 2002 .

Joining dental ceramic layers with glass.

B. Lawn, I. Lloyd, W. Haller, 2011, Dental materials : official publication of the Academy of Dental Materials.

Veneer vs. Core Failure in Adhesively Bonded All-ceramic Crown Layers

B. Lawn, I. Lloyd, S. Bhowmick, 2008, Journal of dental research.

Moisture induced degradation of multilayer ceramic capacitors

Daniel N. Donahoe, Michael G. Pecht, Isabel K. Lloyd, 2006, Microelectron. Reliab..

Characterization of freeze-dried alumina powders using electron microscopy

I. Lloyd, P. Mairet, L. Beyer, 1989 .

Sinterability of Calcined Freeze-Dried Alumina Powders

I. Lloyd, Ling Wang, 1991 .

Design and Construction of Insulation Configuration for Ultra‐High‐Temperature Microwave Processing of Ceramics

Y. Carmel, I. Lloyd, O. Wilson, 2003 .