C. Leonelli

C. Leonelli, P. Veronesi, R. Rosa, 2010, The Journal of microwave power and electromagnetic energy : a publication of the International Microwave Power Institute.

Electrophoretic deposition of multiferroic BiFeO3 sub-micrometric particles from stabilized suspensions

P. Nanni, V. Buscaglia, C. Leonelli, 2013 .

Mechanical and microstructural properties of geopolymer mortars from meta-halloysite: effect of titanium dioxide TiO2 (anatase and rutile) content

C. Leonelli, E. Kamseu, U. Chinje Melo, 2020, SN Applied Sciences.

PHYSICAL-MECHANICAL PROPERTIES OF NEW GREEN BUILDING MATERIALS BASED ON GLASS WASTE

Tiziano Manfredini, Rosa Taurino, Fernanda Andreola, 2015 .

Suzuki–Miyaura coupling under air in water promoted by polymer supported palladium nanoparticles

C. Leonelli, P. Mastrorilli, A. Rizzuti, 2013 .

Syntheses of Fe2O3/Silica Red Inorganic Inclusion Pigments for Ceramic Applications

C. Leonelli, A. Ferrari, T. Manfredini, 1998 .

Valorization of marble powder wastes using rice husk ash to yield enhanced-performance inorganic polymer cements: Phase evolution, microstructure, and micromechanics analyses

C. Leonelli, A. Mariani, R. Rosa, 2022, Cleaner Engineering and Technology.

Self-compacting geopolymer concretes: Effects of addition of aluminosilicate-rich fines

C. Leonelli, R. Taurino, E. Kamseu, 2016 .

Main development directions in the application of microwave irradiation to the synthesis of nanopowders

C. Leonelli, W. Lojkowski, 2007 .

Mechanical Performance, Phase Evolution and Microstructure of Natural Feldspathic Solid Solutions Consolidated Via Alkali Activation: Effect of NaOH Concentration

C. Leonelli, M. Bignozzi, E. Kamseu, 2021, Silicon.

Metakaolin-based inorganic polymer composite: Effects of fine aggregate composition and structure on porosity evolution, microstructure and mechanical properties

C. Leonelli, M. Cannio, M. Bignozzi, 2014 .

Calibration and Use of the Heating Microscope for Indirect Evaluation of the Viscosity and Meltability of Archeological Glasses

F. Montanari, J. Henderson, C. Leonelli, 2014 .

Evolution of Macropores in a Glass-Ceramic Under Microwave and Conventional Sintering

H. Kim, C. Leonelli, C. Siligardi, 2002 .

Mechanical performance and fracture behaviour of glass–matrix composites reinforced with molybdenum particles

A. Boccaccini, C. Leonelli, P. Veronesi, 2005 .

Processing of novel glass matrix composites by microwave heating

A. Boccaccini, C. Leonelli, P. Veronesi, 2004 .

Vanadium doping in CaO-ZrO2-SiO2 glasses

C. Leonelli, C. Siligardi, A. Ferrari, 2002 .

Microstructure and mechanical properties of 5.8 GHz microwave-sintered ZrO2/Al2O3 ceramics

C. Leonelli, P. Veronesi, A. Borrell, 2019, Ceramics International.

Insight into t->m transition of MW treated 3Y-PSZ ceramics by grazing incidence X-ray diffraction

C. Leonelli, M. Romagnoli, M. Cannio, 2021, Journal of the European Ceramic Society.

Microstructure and mechanical, physical and structural properties of sustainable lightweight metakaolin-based geopolymer cements and mortars employing rice husk

C. Leonelli, M. Bignozzi, E. Kamseu, 2019, Journal of Asian Ceramic Societies.

Prismatic applicator for continuous microwave-assisted synthesis of metallic nanoparticles

C. Leonelli, P. Veronesi, A. Barzanti, 2011, 2011 IEEE MTT-S International Microwave Symposium.

Electrophoretic deposition: An effective technique to obtain functionalized nanocoatings

C. Leonelli, M. Cannio, D. Boccaccini, 2021 .

Grain Size and Grain Size Distribution of ZrO 2 :Pr Ceramic Nanopowders Determined by Different Methods

K. Kurzydłowski, C. Leonelli, T. Wejrzanowski, 2010 .

Modifications on Bulk Crystallization of Glasses Belonging to M2O-CaO-SiO2-ZrO2 System in A 2.45 GHz Microwave Field

C. Leonelli, C. Siligardi, Y. Fang, 1996 .

Control of pore size by metallic fibres in glass matrix composite foams produced by microwave heating

A. Boccaccini, C. Leonelli, P. Veronesi, 2004 .

Anodic aqueous electrophoretic deposition of titanium dioxide using carboxylic acids as dispersing agents

C. Leonelli, P. Veronesi, C. Sorrell, 2011, 1303.2742.

Mild and efficient synthesis of secondary aromatic amines by one-pot stepwise reductive amination of arylaldehydes with nitroarenes promoted by reusable nickel nanoparticles

G. Romanazzi, C. Leonelli, P. Mastrorilli, 2019, Molecular Catalysis.

Microwave-Hydrothermal Synthesis of Nanocrystalline Zirconia Powders

C. Leonelli, G. Pellacani, C. Siligardi, 2001 .

ALKALI ACTIVATION FOR GEOPOLYMERS PREPARATION

I. Lancellotti, C. Leonelli, M. Bignozzi, 2013 .

In Vitro Evaluation of Zirconia Nanopowders

C. Leonelli, L. Menabue, G. Lusvardi, 2003 .

Polymer supported palladium nanocrystals as efficient and recyclable catalyst for the reduction of nitroarenes to anilines under mild conditions in water

G. Romanazzi, C. Leonelli, S. Intini, 2014 .

Improvement of the surface properties of polycarbonate by organic–inorganic hybrid coatings

P. Fabbri, F. Pilati, C. Leonelli, 2008 .

The effect of ZrO2 in 30K2O-70SiO2 glass: a comparison with 30Li2O-70SiO2

I. Lancellotti, L. Barbieri, C. Leonelli, 2003 .

Nanosized CeO2 powders obtained by flux method

C. Leonelli, A. Corradi, T. Manfredini, 1999 .

The effects of synthesized calcium phosphate compounds on the mechanical and microstructural properties of metakaolin-based geopolymer cements

C. Leonelli, M. Bignozzi, E. Kamseu, 2018 .

Influence of fine aggregates on the microstructure, porosity and chemico-mechanical stability of inorganic polymer concretes

L. Barbieri, C. Leonelli, R. Taurino, 2015 .

Anodic aqueous electrophoretic deposition of titanium dioxide using carboxylic acids as dispersing agents

C. Leonelli, P. Veronesi, C. Sorrell, 2011, 1303.2742.

Particle size-related limitations of persistent phosphors based on the doped Y3Al2Ga3O12 system

C. Leonelli, F. Armetta, M. Saladino, 2021, Scientific reports.

The effects of firing conditions on the properties of electrophoretically deposited titanium dioxide films on graphite substrates

C. Leonelli, C. Sorrell, M. Michelazzi, 2011, 1303.2757.

Nonconventional Synthesis of Praseodymium-Doped Ceria by Flux Method

R. Bertoncello, C. Leonelli, T. Manfredini, 2000 .

Resin-Immobilized Palladium Nanoparticle Catalysts for Organic Reactions in Aqueous Media: Morphological Aspects

C. Leonelli, P. Mastrorilli, A. Rizzuti, 2015, Molecules.

Investigation of the relationship between the condensed structure and the chemically bonded water content in the poly(sialate-siloxo) network

F. Andreola, C. Leonelli, E. Kamseu, 2018 .

Role of ɣ-Al2O3 on the mechanical and microstructural properties of metakaolin-based geopolymer cements

F. Andreola, C. Leonelli, E. Kamseu, 2018, Journal of Sol-Gel Science and Technology.

Handbook of alkali-activated cements, mortars and concretes

P. Chindaprasirt, F. Pacheco-Torgal, J. Labrincha, 2015 .

FT-IR Characterization of Antimicrobial Hybrid Materials through Sol-Gel Synthesis

M. Catauro, C. Leonelli, Simona Piccolella, 2020, Applied Sciences.

Effect of frequency on MW assisted sintering: 2.45 GHz versus 5.8 GHz

C. Leonelli, P. Veronesi, A. Borrell, 2020 .

Geopolymer binders from metakaolin using sodium waterglass from waste glass and rice husk ash as alternative activators: A comparative study

C. Leonelli, E. Kamseu, C. Rüscher, 2016 .

Characterisation of the surface conductivity of glassy materials by means of impedance spectroscopy measurements

C. Leonelli, G. Pellacani, C. Siligardi, 1998 .

Mechanical Properties and Microstructure of a Metakaolin-Based Inorganic Polymer Mortar Reinforced with Quartz Sand

C. Leonelli, Hasan Assaedi, T. Alomayri, 2020, Silicon.

Amorphous Germanium(II) Sulfide Particles Obtained By Microwave Assisted Decomposition Of Germanium (IV) Sulfide

A. Barba, C. Leonelli, G. Pellacani, 2006 .

Alkali activated materials using pumice from the Aeolian Islands (Sicily, Italy) and their potentiality for cultural heritage applications: Preliminary study

C. Leonelli, P. Mazzoleni, B. Megna, 2020 .

Influence of viscosity on the crystallization of some anorthite-diopside glass precursors

L. Barbieri, C. Leonelli, C. Siligardi, 1993 .

Potassium alkali concentration and heat treatment affected metakaolin-based geopolymer

P. Chindaprasirt, C. Leonelli, E. Kamseu, 2016 .

Microwave technique applied to the hydrothermal synthesis and sintering of calcia stabilized zirconia nanoparticles

C. Leonelli, A. Rizzuti, R. Rosa, 2010 .

Microwave-Assisted Hydrothermal Synthesis as a Rapid Route Towards Manganite Preparation

P. Nanni, M. Viviani, C. Leonelli, 2007 .

Effect of Temperature and Humidity on the Synthesis of Alkali-Activated Binders Based on Bottom Ash from Municipal Waste Incineration

J. M. Chimenos, I. Lancellotti, C. Leonelli, 2022, Sustainability.

Stabilization of bismuth ferrite suspensions in aqueous medium with sodium polyacrylate characterized by different molecular weights

C. Leonelli, M. Cannio, R. Rosa, 2015 .

Effect of low-temperature high-pressure sintering on BiFeO3 density, electrical magnetic and structural properties

P. Nanni, V. Buscaglia, C. Leonelli, 2013 .

Optimization of BFO microwave-hydrothermal synthesis: Influence of process parameters

P. Nanni, V. Buscaglia, C. Leonelli, 2013 .

Phase Transitions: A Multinational

P. Nanni, V. Buscaglia, C. Leonelli, 2013 .

Dispersing hydrophilic nanoparticles in hydrophobic polymers: HDPE/ZnO nanocomposites by a novel template-based approach

D. Acierno, C. Leonelli, R. Rosa, 2014 .

Micro-extruded LaSrCuFeO-based polystyrene magnetic composites: morphological and magnetic characterization

C. Leonelli, G. Varvaro, P. Russo, 2022, Journal of Alloys and Compounds.

Nucleation and Crystallization of a Lithium Aluminosilicate Glass

L. Barbieri, C. Tomasi, C. Leonelli, 2005 .

Urea Glass Route as a Way to Optimize YAGG:Ce3+,Cr3+,Pr3+ Nanocrystals for Persistent Luminescence Applications

C. Leonelli, F. Armetta, M. Saladino, 2022, Langmuir : the ACS journal of surfaces and colloids.

Advancing the Use of Secondary Inputs in Geopolymer Binders for Sustainable Cementitious Composites: A Review

C. Leonelli, E. Obonyo, E. Kamseu, 2011 .

Energy Efficiency in the Microwave-Assisted Solid-State Synthesis of Cobalt Aluminate Pigment

C. Leonelli, P. Veronesi, F. Bondioli, 2017 .

FT-IR study of early stages of alkali activated materials based on pyroclastic deposits (Mt. Etna, Sicily, Italy) using two different alkaline solutions

C. Leonelli, S. Rossignol, P. Mazzoleni, 2020 .

Chemical and Biological Characterization of Geopolymers for Potential Application as Hard Tissue Prostheses

M. Catauro, I. Lancellotti, C. Leonelli, 2010 .

Investigation of Volcanic Ash Based Geopolymers as Potential Building Materials

C. Leonelli, D. Perera, Patrick N. Lemougna, 2009 .

Sustainable Chromium Encapsulation: Alkali Activation Route

M. Berrettoni, M. Giorgetti, I. Lancellotti, 2022, Frontiers in Materials.

A simple approach for determining the in situ fracture toughness of ceramic platelets used in composite materials by numerical simulations

A. Boccaccini, C. Leonelli, V. Cannillo, 2001 .

The microstructure and mechanical properties of sintered celsian and strontium-celsian glass-ceramics

C. Leonelli, C. Siligardi, M. Romagnoli, 1995 .

Design of porous Geopolymers for hygrothermal applications: role of nano and meso porosity

C. Leonelli, L. Valentini, L. M. B. À. Moungam, 2022, Silicon.

Solution combustion synthesis of La1−xSrxFe1−yCuyO3±w (x=0, 0.2; y=0, 0.2) perovskite nanoparticles: Conventional vs. microwaves ignition

C. Leonelli, P. Veronesi, R. Rosa, 2015 .

Effect of Combined Metakaolin and Basalt Powder Additions to Laterite-Based Geopolymers Activated by Rice Husk Ash (RHA)/NaOH Solution

C. Leonelli, Rodrigue Cyriaque Kaze, E. Kamseu, 2021, Silicon.

Recycling of Waste Corundum Abrasive Powder in MK-Based Geopolymers

M. Catauro, L. Barbieri, C. Leonelli, 2022, Polymers.

Synthesis and properties of inorganic polymers (geopolymers) derived from Cameroon-meta-halloysite

C. Leonelli, H. Rahier, E. Kamseu, 2018, Ceramics International.

Ultrafast microwave hydrothermal synthesis and characterization of Bi1-xLaxFeO3 micronized particles

C. Bahl, C. Leonelli, M. Cannio, 2015 .

Thermal Influence on Physico‐Chemical Properties of Geopolymers Based on Metakaolin and Red Tomato Waste

M. Catauro, C. Leonelli, Giovanni Dal Poggetto, 2022, Macromolecular Symposia.

Particles size and distribution on the improvement of the mechanical performance of high strength solid solution based inorganic polymer composites: A microstructural approach

C. Leonelli, M. Bignozzi, E. Kamseu, 2021, Materials Chemistry and Physics.

Organic-inorganic materials through first simultaneous frontal polymerization and frontal geopolymerization

C. Leonelli, G. Malucelli, A. Spinella, 2021, Materials Letters.

Microstructure and physico-chemical transformation of some common woods from Cameroon during drying

F. Andreola, C. Leonelli, S. Rossignol, 2020, Journal of Thermal Analysis and Calorimetry.

Ferrisilicates formation during the geopolymerization of natural Fe-rich aluminosilicate precursors

C. Leonelli, S. Rossignol, E. Kamseu, 2020 .

On the versatility and distinctiveness in the use of microwave energy for the ignition of low exothermic Ni–Ti intermetallics combustion synthesis

C. Leonelli, P. Veronesi, R. Rosa, 2019, Materials Chemistry and Physics.

Mosaic tesserae from Italy and the production of Mediterranean coloured glass (4rd century BCE–4th century CE). Part I: Chemical composition and technology

J. Henderson, C. Leonelli, J. Evans, 2016 .

Early evidences of vitreous materials in Roman mosaics from Italy: An archaeological and archaeometric integrated study

Cinzia Sada, Cristina Boschetti, Anna Bonamartini Corradi, 2008 .

Preliminary Thermal Investigations of Calcium Antimonate Opacified White Glass Tesserae

C. Leonelli, M. Romagnoli, R. Rosa, 2020, Heritage.

Glass-working evidences at Dürres, Albania: An archaeological and archaeometric study

M. Martini, C. Leonelli, P. Iacumin, 2008 .

The Effects of Carboxylic Acids on the Aqueous Dispersion and Electrophoretic Deposition of ZrO2

C. Leonelli, C. Sorrell, C. Sorrell, 2013, 1303.2754.

A polymer supported palladium(II) β-ketoesterate complex as active and recyclable pre-catalyst for selective reduction of quinolines in water with sodium borohydride

A. F. Piccinni, G. Romanazzi, C. Leonelli, 2015 .

Effect of pressure on synthesis of Pr-doped zirconia powders produced by microwave-driven hydrothermal reaction

K. Kurzydłowski, C. Leonelli, T. Wejrzanowski, 2006 .

Microwave‐Hydrothermal Synthesis of Nanophase Ferrites

S. Komarneni, C. Leonelli, G. Pellacani, 2005 .

Direct Energy Supply to the Reaction Mixture during Microwave-Assisted Hydrothermal and Combustion Synthesis of Inorganic Materials

E. Ferrari, C. Leonelli, R. Rosa, 2014 .

New "green" approaches to the synthesis of pyrazole derivatives.

C. Leonelli, P. Veronesi, A. Rizzuti, 2007, Molecules.

Microwave Selective Thermal Development of Latent Fingerprints on Porous Surfaces: Potentialities of the Method and Preliminary Experimental Results

C. Leonelli, P. Veronesi, R. Rosa, 2013, Journal of forensic sciences.

Ultrafine Magnetite Nanopowder: Synthesis, Characterization, and Preliminary Use as Filler of Polymethylmethacrylate Nanocomposites

G. Carotenuto, M. Palomba, D. Acierno, 2012 .

Microstuctural evolution during thermal treatment of three kaolinitic clays from Cameroon

C. Leonelli, E. Kamseu, A. Corradi, 2009 .

One-pot synthesis of aniline derivatives from nitroarenes under mild conditions promoted by a recyclable polymer-supported palladium catalyst

C. Leonelli, P. Mastrorilli, A. Rizzuti, 2011 .

Partial Hydrogenation of Soybean and Waste Cooking Oil Biodiesel over Recyclable-Polymer-Supported Pd and Ni Nanoparticles

G. Romanazzi, C. Leonelli, P. Mastrorilli, 2022, Catalysts.

Colouring inorganic oxides in MgOCaOAl2O3SiO2 glass-ceramic systems

L. Barbieri, C. Leonelli, G. Pellacani, 1993 .

Reactivity Of Tosylhydrazones Under Microwave Irradiata In Solvent-Free Environment

C. Leonelli, C. Siligardi, P. Veronesi, 2004 .

Polymer supported Nickel nanoparticles as recyclable catalyst for the reduction of nitroarenes to anilines in aqueous medium

G. Romanazzi, C. Leonelli, P. Mastrorilli, 2018 .

Influence of the drying treatment on the performance of V–Nb mixed oxides catalysts synthesised via sol–gel

M. Catauro, C. Leonelli, F. Papale, 2013 .

Microwave-Assisted Extraction: An Introduction to Dielectric Heating

G. Cravotto, C. Leonelli, P. Veronesi, 2012 .

Sintering behavior of glass-ceramic frits

C. Leonelli, C. Siligardi, M. D'arrigo, 2000 .

Influence of Small Additions of Al2O3 on the Properties of the Na2O·3SiO2 Glass

M. Menziani, C. Leonelli, M. Montorsi, 2001 .

Crystallization of aragonite particles from solution under microwave irradiation

C. Leonelli, A. Rizzuti, Cristina Leonelli, 2008 .

Engineering properties, phase evolution and microstructure of the iron-rich aluminosilicates-cement based composites: Cleaner production of energy efficient and sustainable materials

C. Leonelli, Rodrigue Cyriaque Kaze, E. Kamseu, 2021, Cleaner Materials.

Effect of the crystallisation time and metal oxide pigments on translucency and the mechanical and physical properties of mica glass-ceramics

C. Leonelli, P. Veronesi, G. Heness, 2020 .

Synthesis and characterization of cerium-doped glasses and in vitro evaluation of bioactivity

C. Leonelli, L. Menabue, M. Tonelli, 2003 .

In vitro surface reaction in SBF of a non-crystalline aluminosilicate (geopolymer) material

P. Chindaprasirt, C. Leonelli, R. Rosa, 2018, Journal of the Australian Ceramic Society.

Binder Chemistry – Low-Calcium Alkali-Activated Materials

J. Provis, C. Leonelli, A. Fernández-Jiménez, 2014 .

Use of noncontact dilatometry for the assessment of the sintering kinetics during mullitization of three kaolinitic clays from Cameroon

C. Leonelli, P. Veronesi, A. Rizzuti, 2009 .

Efficient chemical stabilization of tannery wastewater pollutants in a single step process: Geopolymerization

M. Berrettoni, M. Giorgetti, I. Lancellotti, 2021, Sustainable Environment Research.

Microwave‐Hydrothermal Synthesis and Hyperfine Characterization of Praseodymium‐Doped Nanometric Zirconia Powders

C. Leonelli, A. Ferrari, T. Manfredini, 2005 .

Processing of a silicon-carbide-whisker-reinforced glass-ceramic composite by microwave heating

C. Leonelli, C. Siligardi, T. Manfredini, 2005 .

The influence of gibbsite in kaolin and the formation of berlinite on the properties of metakaolin-phosphate-based geopolymer cements

C. Leonelli, E. Kamseu, J. Djobo, 2017 .

Effect of V2O5 addition on the crystallisation of glasses belonging to the CaO–ZrO2–SiO2 system

C. Leonelli, G. Pellacani, C. Siligardi, 2003 .

The pO-Index and R Ratio Gap Methods for the Assessment of Corrosion Risk in Refractory Materials in Contact with Glass Melts

A. Boccaccini, C. Leonelli, P. Veronesi, 2010 .

Alignment of silicon carbide whiskers in polymer matrix

L. Chen, C. Leonelli, 1997 .

Influence of the molar concentration of phosphoric acid solution on the properties of metakaolin-phosphate-based geopolymer cements

F. Andreola, C. Leonelli, E. Kamseu, 2017 .

COLOURING EFFECTS OF SYNTHETIC INORGANIC COBALT-PIGMENTS IN FAST-FIRED PORCELAINIZED STONEWARE TILES

C. Leonelli, G. Pellacani, A. Ferrari, 1998 .

Highly Homogeneous Al2O3–ZrO2 Nanopowder via Microwave-Assisted Hydro- and SolvoThermal Synthesis

C. Leonelli, A. Rizzuti, A. Tucci, 2011 .

Techniques used to determine porosity

F. Andreola, C. Leonelli, M. Romagnoli, 2000 .

Preparation of Nd:YAG nanopowder in a confined environment.

C. Leonelli, E. Caponetti, M. Saladino, 2007, Langmuir : the ACS journal of surfaces and colloids.

Design of ceramic filters using Clay/Sawdust composites: Effect of pore network on the hydraulic permeability

C. Leonelli, S. Rossignol, E. Kamseu, 2017 .

Characterisation of porcelain compositions using two china clays from Cameroon

C. Leonelli, G. Pellacani, P. Veronesi, 2007 .

Bulk composition and microstructure dependence of effective thermal conductivity of porous inorganic polymer cements

David S. Smith, Sylvie Rossignol, C. Leonelli, 2012 .

Process Intensification by Experimental Design Application to Microwave-Assisted Extraction of Phenolic Compounds from Juglans regia L.

L. Tassi, C. Leonelli, P. Veronesi, 2017, Food Analytical Methods.

Solubility, reactivity and nucleation effect of Cr2O3 in the CaO-MgO-Al2O3-SiO2 glassy system

R. Bertoncello, L. Barbieri, C. Leonelli, 1994, Journal of Materials Science.

Non-isothermal kinetic equations applied to crystallization of glasses

L. Barbieri, C. Leonelli, G. Pellacani, 1993 .

Kinetic study of surface nucleated MgO-CaO-Al2O3-SiO2 glasses

L. Barbieri, C. Leonelli, G. Pellacani, 1992 .

A review on combustion synthesis intensification by means of microwave energy

Roberto Rosa, C. Leonelli, P. Veronesi, 2013 .

A Sustainable Approach for the Geopolymerization of Natural Iron-Rich Aluminosilicate Materials

C. Leonelli, Patrick N. Lemougna, E. Obonyo, 2014 .

The role of kyanite in the improvement in the crystallization and densification of the high strength mullite matrix

C. Leonelli, E. Kamseu, U. C. Melo, 2016, Journal of Thermal Analysis and Calorimetry.

Refractory ceramics bonds from potassium-based inorganic polymer for advanced applications: Crystalline phase changes and descriptive microstructure

C. Leonelli, G. Lecomte‐Nana, E. Kamseu, 2022, Ceramics International.

Mechanical strength and microstructure of metakaolin/volcanic ash-based geopolymer composites reinforced with reactive silica from rice husk ash (RHA)

C. Leonelli, T. Alomayri, E. Kamseu, 2021 .

Cumulative pore volume, pore size distribution and phases percolation in porous inorganic polymer composites: Relation microstructure and effective thermal conductivity

C. Leonelli, S. Rossignol, E. Kamseu, 2015 .

Porcelain stoneware with pegmatite and nepheline syenite solid solutions: Pore size distribution and descriptive microstructure

C. Leonelli, E. Kamseu, U. C. Melo, 2013 .

Mullitization Behaviour During Thermal Treatment of Three Kaolinitic Clays from Cameroon : Densification, Sintering Kinetics and Microstructure

C. Leonelli, G. Pellacani, E. Kamseu, 2008 .

Dependence of the geopolymerization process and end-products to the nature of solid precursors: Challenge of the sustainability

I. Lancellotti, C. Leonelli, V. Alzari, 2021 .

Utilization of sodium waterglass from sugar cane bagasse ash as a new alternative hardener for producing metakaolin-based geopolymer cement

C. Leonelli, E. Kamseu, J. Djobo, 2017 .

Chemical and Mechanical Properties of Metakaolin-Based Geopolymers with Waste Corundum Powder Resulting from Erosion Testing

C. Leonelli, Giovanni Dal Poggetto, Pakamon Kittisayarm, 2022, Polymers.

Microwave Processing of Ceramic and Ceramic Matrix Composites

C. Leonelli, P. Veronesi, 2012 .

Effect of forming pressure on the reactivity and microstructure of zircon powder compacts

C. Leonelli, C. Siligardi, T. Manfredini, 1993 .

The application of microwaves in the synthesis of Ce0.9Pr0.1O2 nanostructured powders

C. Leonelli, C. Siligardi, A. Ferrari, 2001 .

Microwave Synthesis of Al2O3/CR2O3 (SS) Ceramic Pigments

C. Leonelli, C. Siligardi, A. Ferrari, 1998 .

Reaction Mechanism in Alumina/Chromia (Al2O3–Cr2O3) Solid Solutions Obtained by Coprecipitation

C. Leonelli, P. Mustarelli, A. Ferrari, 2004 .

Assessment of viscoelastic crack bridging toughening in refractory materials

C. Leonelli, P. Veronesi, M. Romagnoli, 2008 .

Influence of the synthetic calcium aluminate hydrate and the mixture of calcium aluminate and silicate hydrates on the compressive strengths and the microstructure of metakaolin-based geopolymer cements

F. Andreola, C. Leonelli, C. Nanseu-Njiki, 2021 .

Influence of the molar ratios CaO/SiO2 contained in the sustainable microcomposites on the mechanical and microstructural properties of (Ca, Na)-poly(sialate-siloxo) networks

C. Leonelli, M. Bignozzi, E. Kamseu, 2019 .

Production of Porous Poly(phospho-siloxo) Networks for Thermal Insulations Using Low-Value Calcium-Rich Wastes as Pore-Forming Agents

F. Andreola, C. Leonelli, E. Kamseu, 2019, Waste and Biomass Valorization.

New ceramic materials from MSWI bottom ash obtained by an innovative microwave-assisted sintering process

E. Karamanova, G. Avdeev, A. Karamanov, 2017 .

Microwave Ignited Combustion Synthesis as a Joining Technique for Dissimilar Materials

C. Leonelli, P. Veronesi, R. Rosa, 2012, Journal of Materials Engineering and Performance.

Microwave Activated Combustion Synthesis and Compaction in Separate E and H Fields: Numerical Simulation and Experimental Results

M. Ferraris, M. Salvo, V. Casalegno, 2010 .

Cleaner production of the lightweight insulating composites: Microstructure, pore network and thermal conductivity

C. Leonelli, B. Nait‐Ali, Patrick N. Lemougna, 2015 .

Glass–Ceramic Foams from Borosilicate Glass Waste

I. Lancellotti, L. Barbieri, C. Leonelli, 2014 .

Effects of nucleating agents on diopside crystallization in new glass-ceramics for tile-glaze application

C. Leonelli, G. Pellacani, C. Siligardi, 1995 .

Microstructural study of microwave sintered zirconia for dental applications

C. Leonelli, C. Monaco, A. Tucci, 2015 .

Microwave assisted sintering of green metal parts

L. Iuliano, L. Denti, C. Leonelli, 2008 .

Efficient Addition of Waste Glass in MK-Based Geopolymers: Microstructure, Antibacterial and Cytotoxicity Investigation

M. Catauro, G. Crescente, C. Leonelli, 2021, Polymers.

Waste Cork in Metakaolin–Geopolymer Matrix: Physico-Mechanical Characterization

I. Lancellotti, L. Barbieri, C. Leonelli, 2023, Applied Sciences.

Preparation of low-cost nano and microcomposites from chicken eggshell, nano-silica and rice husk ash and their utilisations as additives for producing geopolymer cements

F. Andreola, C. Leonelli, M. Bignozzi, 2020 .

Microstructural and mechanical properties of (Ca, Na)-poly(sialate-siloxo) from metakaolin as aluminosilicate and calcium silicate from precipitated silica and calcined chicken eggshell

F. Andreola, C. Leonelli, E. Kamseu, 2019, Construction and Building Materials.

Design of low cost semi-crystalline calcium silicate from biomass for the improvement of the mechanical and microstructural properties of metakaolin-based geopolymer cements

C. Leonelli, E. Kamseu, A. Elimbi, 2019, Materials Chemistry and Physics.

Comparison of metakaolin-based geopolymer cements from commercial sodium waterglass and sodium waterglass from rice husk ash

C. Leonelli, E. Kamseu, C. Rüscher, 2016, Journal of Sol-Gel Science and Technology.

Substitution of sodium silicate with rice husk ash-NaOH solution in metakaolin based geopolymer cement concerning reduction in global warming

Duangrudee Chaysuwan, C. Leonelli, M. Cannio, 2017 .

Effect of silicate modulus on the setting, mechanical strength and microstructure of iron-rich aluminosilicate (laterite) based-geopolymer cured at room temperature

C. Leonelli, H. Rahier, E. Kamseu, 2018, Ceramics International.

Geopolymers: a new and smart way for a sustainable development

V. Medri, C. Leonelli, A. Vaccari, 2013 .

Towards optimization of mechanical and microstructural performances of Fe-rich laterite geopolymer binders cured at room temperature by varying the activating solution

F. Andreola, C. Leonelli, Rodrigue Cyriaque Kaze, 2022, RSC advances.

Mine Clay Washing Residues as a Source for Alkali-Activated Binders

C. Leonelli, C. Siligardi, A. Formia, 2021, Materials.

Effect of the Introduction of Reactive Fillers and Metakaolin in Waste Clay-Based Materials for Geopolymerization Processes

C. Leonelli, A. Formia, Caterina Sgarlata, 2021, Molecules.

Microwave thermal inertisation of asbestos containing waste and its recycling in traditional ceramics.

F Andreola, F. Andreola, I. Lancellotti, 2006, Journal of hazardous materials.

Recycled natural wastes in metakaolin based porous geopolymers for insulating applications

C. Leonelli, B. Nait‐Ali, E. Kamseu, 2015 .

Microwave ignition of the combustion synthesis of aluminides and field-related effects

C. Leonelli, P. Veronesi, R. Rosa, 2016 .

Microwave-assisted Melt Reaction Method for the Intercalation of Carboxylic Acid Anions into Layered Double Hydroxides

C. Leonelli, C. Villa, R. Rosa, 2013, The Journal of microwave power and electromagnetic energy : a publication of the International Microwave Power Institute.

Microwave assisted sintering of Na-β’’-Al2O3 in single mode cavities: Insights in the use of 2450 MHz frequency and preliminary experiments at 5800 MHz

C. Leonelli, P. Veronesi, G. Dimitrakis, 2020 .

Microwave assisted combustion synthesis in the system Ti–Si–C for the joining of SiC: Experimental and numerical simulation results

M. Ferraris, M. Salvo, V. Casalegno, 2013 .

Single step combustion synthesis of β-NiAl-coated γ-TiAl by microwave ignition and subsequent annealing

C. Leonelli, P. Veronesi, R. Rosa, 2013 .

Microwave processing of high entropy alloys: A powder metallurgy approach

C. Leonelli, P. Veronesi, R. Rosa, 2017 .

Microwave-Assisted Preparation of High Entropy Alloys

C. Leonelli, P. Veronesi, R. Rosa, 2015 .

Microwave-assisted combustion synthesis and compaction of intermetallic-based functionally graded materials: Numerical simulation and experimental results

C. Leonelli, P. Veronesi, R. Rosa, 2009 .

Synthesis of silica nanoparticles in a continuous-flow microwave reactor

C. Leonelli, A. Ferrari, A. Corradi, 2006 .

The coordination core and charge of chromium in Metakaolin-geopolymers as revealed by X-Ray absorption spectroscopy

M. Berrettoni, M. Giorgetti, I. Lancellotti, 2020 .

Thermal and microbiological performance of metakaolin-based geopolymers cement with waste glass

M. Catauro, C. Leonelli, Giovanni Dal Poggetto, 2020 .

Preliminary Experiments of In Situ Atomic Force Microscopy Observation of Hydroxyapatite Formation on Bioactive Glass Surface

C. Leonelli, L. Menabue, M. Tonelli, 2004 .

Synthesis of Zirconia Nanoparticles in a Continuous-Flow Microwave Reactor

Anna Maria Ferrari, Federica Bondioli, Anna Bonamartini Corradi, 2008 .

Determination of thermal shock resistance in refractory materials by ultrasonic pulse velocity measurement

C. Leonelli, G. Pellacani, P. Veronesi, 2007 .

Enhanced thermal stability in K2O-metakaolin-based geopolymer concretes by Al2O3 and SiO2 fillers addition

C. Leonelli, A. Rizzuti, D. Perera, 2010 .

Use of combustion synthesis/ self-propagating high- temperature synthesis (SHS) for the joining of similar/dissimilar materials

C. Leonelli, P. Veronesi, R. Rosa, 2022, Joining Processes for Dissimilar and Advanced Materials.

Enhanced reactive NiAl coatings by microwave‐assisted SHS

C. Leonelli, P. Veronesi, G. Poli, 2008 .

Optimisation of the microwave assisted SHS of intermetallics in single mode applicators

C. Leonelli, P. Veronesi, G. Poli, 2022 .

Microwave Assisted Self-Propagating High-Temperature Synthesis for Joining SiC Ceramics and SiC/SiC Composites by Ni-Al System

M. Ferraris, M. Salvo, V. Casalegno, 2015 .

Characterisation of CaO-ZrO2-SiO2 glasses by MAS-NMR and molecular dynamics

L. Barbieri, C. Leonelli, C. Siligardi, 2004 .

Non-contact dilatometry of hard and soft porcelain compositions

C. Leonelli, E. Kamseu, D. Boccaccini, 2007 .

Biomass Processing via Microwave Treatment

G. Cravotto, C. Leonelli, R. Rosa, 2021 .

Microwave-Assisted Vacuum Synthesis of TiO2 Nanocrystalline Powders in One-Pot, One-Step Procedure

C. Leonelli, G. Baldi, R. Rosa, 2021, Nanomaterials.

Phytochemical compounds or their synthetic counterparts? A detailed comparison of the quantitative environmental assessment for the synthesis and extraction of curcumin

Anna Maria Ferrari, Roberto Rosa, Elisabetta Zerazion, 2016 .

Study of barium feldspar polymorphism as a function of temperature and calcium content

L. Barbieri, C. Leonelli, G. Pellacani, 1995 .

Influence of some transition metal cations on the properties of BaO-containing glasses and glass-ceramics

L. Barbieri, C. Leonelli, G. Pellacani, 1999 .

Microwave assisted synthesis of Si-modified Mn25FexNi25Cu(50−x) high entropy alloys

C. Leonelli, P. Veronesi, R. Rosa, 2016 .

Crystallization of (Na2O–MgO)–CaO–Al2O3–SiO2 Glassy Systems Formulated from Waste Products

Anna Maria Ferrari, Luisa Barbieri, Isabella Lancellotti, 2004 .

Green Deep Eutectic Solvents for Microwave-Assisted Biomass Delignification and Valorisation

E. Calcio Gaudino, G. Cravotto, C. Leonelli, 2021, Molecules.

Microstructural and mechanical properties of poly(sialate-siloxo) networks obtained using metakaolins from kaolin and halloysite as aluminosilicate sources: A comparative study

C. Leonelli, E. Kamseu, C. Rüscher, 2020, Applied Clay Science.

The corrosion of kaolinite by iron minerals and the effects on geopolymerization

C. Leonelli, Rodrigue Cyriaque Kaze, L. M. B. À. Moungam, 2017 .

Inorganic polymers from alkali activation of metakaolin: Effect of setting and curing on structure

Michelina Catauro, Flavia Bollino, Isabella Lancellotti, 2013 .

Evolution of fired clay products: From origin to sustainable building ceramics

C. Leonelli, E. Obonyo, E. Kamseu, 2011 .

Effects of curing cycles on developing strength and microstructure of goethite-rich aluminosilicate (corroded laterite) based geopolymer composites

C. Leonelli, S. Rossignol, E. Kamseu, 2021 .

Rheology of geopolymer by DOE approach

Marcello Romagnoli, Magdalena Lassinantti Gualtieri, C. Leonelli, 2012 .

Enhancing the mechanical properties of porcelain stoneware tiles: a microstructural approach

Federica Bondioli, Valeria Cannillo, Tiziano Manfredini, 2001 .

Sintering behaviors of two porcelainized stoneware compositions using pegmatite and nepheline syenite minerals

C. Leonelli, E. Kamseu, U. C. Melo, 2013, Journal of Thermal Analysis and Calorimetry.

Effect of TiO2 addition on the properties of complex aluminosilicate glasses and glass-ceramics

L. Barbieri, C. Leonelli, G. Pellacani, 1997 .

Recycling of industrial wastes in ceramic manufacturing: State of art and glass case studies

Tiziano Manfredini, Fernanda Andreola, Luisa Barbieri, 2016 .

Addition of WEEE Glass to Metakaolin-Based Geopolymeric Binder: A Cytotoxicity Study

M. Catauro, I. Lancellotti, C. Leonelli, 2017 .

Comparison of shear bond strengths between a mica-based glass-ceramic and human dentin using three different resin cements

C. Leonelli, P. Veronesi, G. Bolelli, 2018, Journal of the Australian Ceramic Society.

Sintering and Crystallization of a Glass Powder in the Li2O–ZrO2–SiO2 System

L. Barbieri, C. Leonelli, G. Pellacani, 2005 .

Preparation and properties of fast-fired porcelain tiles containing natural chromite

C. Leonelli, M. Romagnoli, A. Corradi, 1993 .

Design of inorganic polymer cements: Effects of matrix strengthening on microstructure

C. Leonelli, M. Bignozzi, E. Kamseu, 2013 .

Alkali activation processes for incinerator residues management.

Luisa Barbieri, Isabella Lancellotti, I. Lancellotti, 2013, Waste management.

Structural Characterization of Zirconia Nanoparticles Prepared by Microwave-Hydrothermal Synthesis

C. Leonelli, E. Caponetti, M. Saladino, 2009 .

Crystallization of some modified fluor-miserite Kx(Ca,Ce)5−xSi8O22F2 glasses

C. Leonelli, A. Ferrari, E. Hamzawy, 2014 .

Quantitative determination of pyrite in, ceramic clay raw materials by DTA

C. Leonelli, M. Romagnoli, A. Corradi, 1996 .

Effect of isopropanol co-product on the long-term stability of TiO2 nanoparticle suspensions produced by microwave-assisted synthesis

C. Leonelli, G. Baldi, R. Rosa, 2020 .

Valorization of inorganic waste, end of waste and by-product for ceramics

I. Lancellotti, L. Barbieri, C. Leonelli, 2015 .

Development of microwave-assisted sintering of Portland cement raw meal

Praphatsorn Kaewwichit, Jaroon Junsomboon, Parinya Chakartnarodom, 2017 .

Improving insulation in metakaolin based geopolymer: Effects of metabauxite and metatalc

C. Leonelli, S. Rossignol, E. Kamseu, 2019, Journal of Building Engineering.

Mechanical and dynamic-mechanical behavior and morphology of polystyrene/perovskite composites: Effects of filler size

D. Acierno, C. Leonelli, P. Russo, 2014 .

Evaluation of Microwave Synthesis of Ceramic Pigments Based on In Situ Dielectric Characterization

C. Leonelli, B. García-Baños, J. Catalá-Civera, 2023, Materials.

On the use of microwaves during combustion/calcination of N-doped TiO2 precursor: an EMW absorption study combined with TGA-DSC-FTIR results

P. Plaza-González, C. Leonelli, G. Baldi, 2023, Materials Letters.

Mix-design and characterization of alkali activated materials based on metakaolin and ladle slag

Stefania Manzi, Maria Chiara Bignozzi, Luisa Barbieri, 2013 .

Synthesis of WEEE-based geopolymers and their cytotoxicity

M. Catauro, I. Lancellotti, C. Leonelli, 2020 .

Volcanic ash as alternative raw materials for traditional vitrified ceramic products

C. Leonelli, A. Rizzuti, E. Kamseu, 2007 .

Crystallization of some anorthite-diopside glass precursors

C. Leonelli, G. Pellacani, T. Manfredini, 1991, Journal of Materials Science.

The Anorthite–Diopside System: Structural and Devitrification Study. Part II: Crystallinity Analysis by the Rietveld–RIR Method

I. Lancellotti, L. Barbieri, C. Leonelli, 2005 .

Feasibility of Using Cordierite Glass‐Ceramics as Tile Glazes

L. Barbieri, C. Leonelli, C. Siligardi, 2005 .

Li2O─SiO2─Al2O3─MeIIO Glass‐Ceramic Systems for Tile Glaze Applications

C. Leonelli, G. Pellacani, T. Manfredini, 1991 .

Glass-ceramic as tile glazes

L. Barbieri, C. Leonelli, A. Corradi, 1997 .

AMPERE Newsletter

C. Leonelli, P. Veronesi, L. Battezzati, 2017 .

Characterization, reactivity and rheological behaviour of metakaolin and Meta-halloysite based geopolymer binders

C. Leonelli, A. Adesina, T. Alomayri, 2021, Cleaner Materials.

Environmental and Biological Impact of Fly Ash and Metakaolin-Based Alkali-Activated Foams Obtained at 70°C and Fired at 1,000°C

M. Catauro, V. Ducman, C. Leonelli, 2022, Frontiers in Chemistry.

Numerical modelling of the fracture behaviour of a glass matrix composite reinforced with alumina platelets

A. Boccaccini, C. Leonelli, G. Pellacani, 2003 .

A statistical approach for the assessment of reliability in ceramic materials from ultrasonic velocity measurement: Cumulative Flaw Length Theory

A. Boccaccini, C. Leonelli, P. Veronesi, 2009 .

Sintering behaviour, microstructure and mechanical properties of low quartz content vitrified ceramics using volcanic ash

A. Sola, C. Leonelli, A. Rizzuti, 2008 .

Descriptive microstructure and fracture surface observations of fired volcanic ash

C. Leonelli, G. Pellacani, E. Kamseu, 2009 .

Optimization of Microwave‐Assisted Rapid Debinding of CIM Parts in Multi‐Mode Applicators

C. Leonelli, P. Veronesi, R. Rosa, 2010 .

Physical Properties of Quenched Glasses in the Li2O‐ZrO2‐SiO2 System

L. Barbieri, C. Leonelli, G. Pellacani, 1996 .

Numerical models for thermal residual stresses in Al2O3 platelets/borosilicate glass matrix composites

A. Boccaccini, C. Leonelli, V. Cannillo, 2002 .

Transformation of the geopolymer gels to crystalline bonds in cold-setting refractory concretes: Pore evolution, mechanical strength and microstructure

C. Leonelli, P. Veronesi, E. Kamseu, 2015 .

Microstructure and thermal properties in the RO-MgO-Al2O3-SiO2 (R=Ca, Sr, Ba, Zn) glass-ceramic systems

L. Barbieri, C. Leonelli, G. Pellacani, 1992 .

Densification of glass powders belonging to the CaO–ZrO2–SiO2 system by microwave heating

C. Leonelli, G. Pellacani, C. Siligardi, 2000 .

Quality Control and Thermal Shock Damage Characterization of High‐Temperature Ceramics by Ultrasonic Pulse Velocity Testing

A. Boccaccini, C. Leonelli, G. Pellacani, 2007 .

A lifetime prediction method based on Cumulative Flaw Length Theory

A. Boccaccini, C. Leonelli, M. Romagnoli, 2012 .

Thermal shock behaviour of mullite–cordierite refractory materials

A. Boccaccini, C. Leonelli, G. Pellacani, 2007 .

Evaluation of thermal shock damage in refractory materials by ultrasonic pulse velocity testing

C. Leonelli, P. Veronesi, M. Romagnoli, 2006 .

Microstructural investigations in cordierite-mullite refractories

A. Boccaccini, C. Leonelli, M. Romagnoli, 2005 .

Innovative porous ceramic matrices from inorganic polymer composites (IPCs): Microstructure and mechanical properties

C. Leonelli, Hasan Assaedi, T. Alomayri, 2021 .

Performances of Laterite-Based Geopolymer Matrice Filters on the Bacteriological Filtration of Contaminated Groundwater and Microstructure

C. Leonelli, S. Rossignol, C. R. Kaze, 2023, SSRN Electronic Journal.

Room-temperature alkaline activation of feldspathic solid solutions: Development of high strength geopolymers

C. Leonelli, Rodrigue Cyriaque Kaze, E. Kamseu, 2019, Construction and Building Materials.

Meta-halloysite to improve compactness in iron-rich laterite-based alkali activated materials

C. Leonelli, H. Rahier, E. Kamseu, 2020 .

Characterisation of White Metakaolin-Based Geopolymers Doped with Synthetic Organic Dyes

M. Catauro, C. Leonelli, Giovanni Dal Poggetto, 2022, Polymers.

The influence of yttria-stabilised zirconia and cerium oxide on the microstructural morphology and properties of a mica glass-ceramic for restorative dental materials

C. Leonelli, G. Heness, D. Chaysuwan, 2021, Journal of Asian Ceramic Societies.

Comparison of Various Solvent Media Efficiency in the Grinding of a Frit Containing Zirconium Oxide

F. Andreola, C. Leonelli, G. Pellacani, 2003 .

Thermal Shock Resistance of Cordierite-Mullite Refractory Composites

A. Boccaccini, C. Leonelli, M. Romagnoli, 2005 .

Procedure to generate a selection chart for microwave sol-gel synthesis of nanoparticles

C. Leonelli, P. Veronesi, G. Baldi, 2023, Chemical Engineering and Processing - Process Intensification.

Thermal, chemical and mechanical characterization of recycled corundum powder in metakaolin-based geopolymer binder

C. Leonelli, Giovanni Dal Poggetto, A. Cardinale, 2023, Applied Clay Science.

Moisture Control Capacity of Geopolymer Composites: Correlation of the Bulk Composition–Pore Network with the Absorption–Desorption Behavior

C. Leonelli, S. Rossignol, E. Kamseu, 2018, Transport in Porous Media.

Design of Inorganic Polymer Mortar from Ferricalsialic and Calsialic Slags for Indoor Humidity Control

I. Lancellotti, C. Leonelli, E. Kamseu, 2016, Materials.

Experimental and computer simulation study of glasses belonging to diopside–anorthite system

I. Lancellotti, L. Barbieri, C. Leonelli, 2004 .

Structural studies on RO-MgO-Al2O3-SiO2 (R = Ca, Sr or Ba) glassy systems by density measurements

L. Barbieri, C. Leonelli, C. Siligardi, 1994 .

Electrical properties and microstructure of glass—ceramic materials from CaO-MgO-Al2O3-SiO2 system

C. Leonelli, F. Sandrolini, A. Saccani, 1996 .

Metakaolin-Based Porous Geopolymer with Aluminium Powder

C. Leonelli, T. Panyathanmaporn, C. Tippayasam, 2014 .

Dependence of the insulating behavior of some common woods to the pore network and packing density of their fibers: a microstructural approach

C. Leonelli, S. Rossignol, E. Kamseu, 2021, Transport in Porous Media.

Bulk Crystallization of Glasses Belonging to the Calcia—Zirconia—Silica System by Microwave Energy

C. Leonelli, G. Pellacani, C. Siligardi, 2004 .

N-Doped Resin Supported Cobalt Nanoparticles for the Catalytic Reduction of Nitroarenes to Corresponding Anilines in Aqueous Medium

G. Romanazzi, C. Leonelli, P. Mastrorilli, 2023, SSRN Electronic Journal.

Effect of hydrothermal time on the forming specific morphology of YPO4:Eu3+ nanoparticles for dedicated luminescent applications as optical markers

C. Leonelli, F. Armetta, M. Saladino, 2023, Ceramics International.

Design and characterization of Cameroonian pegmatite-calcined clay binary mortars via geopolymerization

Surinder Kumar, C. Leonelli, T. Alomayri, 2023, Journal of Building Engineering.

Potentiality of the Use of Pyroclastic Volcanic Residues in the Production of Alkali Activated Material

I. Lancellotti, C. Leonelli, P. Mazzoleni, 2020, Waste and Biomass Valorization.

Development of Geopolymer Mortar from Metakaolin Blended with Agricultural and Industrial Wastes

C. Leonelli, C. Tippayasam, D. Chaysuwan, 2018 .

Thermal Behavior of Metakaolin-Based Geopolymer Cements Using Sodium Waterglass from Rice Husk Ash and Waste Glass as Alternative Activators

C. Leonelli, E. Kamseu, C. Rüscher, 2016, Waste and Biomass Valorization.

Microwave Rapid Debinding and Sintering of MIM/CIM Parts

L. Denti, C. Leonelli, P. Veronesi, 2010 .

Microwave enhancement of the early stages of sintering of metallic powder compacts and metal-containing composites

C. Leonelli, P. Veronesi, G. Poli, 2007 .

EFFECT OF AGRICULTURAL WASTES WITH FLY ASH ON STRENGTH OF GEOPOLYMERS

C. Leonelli, C. Tippayasam, D. Chaysuwan, 2014 .

Influence of the curing temperature on the properties of poly(phospho-ferro-siloxo) networks from laterite

C. Leonelli, E. Kamseu, C. Rüscher, 2019, SN Applied Sciences.

Crucible Effect on Phase Transition Temperature during Microwave Calcination of a N-Doped TiO2 Precursor: Implications for the Preparation of TiO2 Nanophotocatalysts

C. Leonelli, P. Veronesi, G. Baldi, 2023, ACS Applied Nano Materials.

FT-IR Study, Thermal Analysis, and Evaluation of the Antibacterial Activity of a MK-Geopolymer Mortar Using Glass Waste as Fine Aggregate

M. Catauro, I. Blanco, C. Leonelli, 2021, Polymers.

The effect of the addition of ZrSiO4 on the crystallization of 30Li2O70SiO2 powdered glass

L. Barbieri, C. Leonelli, A. Corradi, 1996 .

Performance of geopolymer composites made with feldspathic solid solutions: Micromechanics and microstructure

C. Leonelli, E. Kamseu, A. Akono, 2021, Cement and Concrete Composites.

Pore network and microstructure in the prediction of heat flux transport in sponge-like geopolymers for thermal insulation

C. Leonelli, S. Rossignol, L. Valentini, 2022, Journal of Thermal Analysis and Calorimetry.

Fracture behaviour of refractory ceramics after cyclic thermal shock

A. Boccaccini, C. Leonelli, M. Romagnoli, 2006 .

Recycling of microwave inertised asbestos containing waste in refractory materials

A. Boccaccini, C. Leonelli, G. Pellacani, 2007 .

Antibacterial Properties and Cytotoxicity of 100% Waste Derived Alkali Activated Materials: Slags and Stone Wool-Based Binders

M. Catauro, V. Ducman, I. Lancellotti, 2021, Frontiers in Materials.

Incinerator Bottom Ash and Ladle Slag for Geopolymers Preparation

I. Lancellotti, L. Barbieri, C. Leonelli, 2014, Waste and Biomass Valorization.

Rheology parameters of alkali-activated geopolymeric concrete binders

C. Leonelli, M. Romagnoli, 2015 .

Combination of electrophoretic deposition and microwave-ignited combustion synthesis for the preparation of ceramic coated intermetallic-based materials

A. Boccaccini, C. Leonelli, P. Veronesi, 2012 .

Effect of Thai Kaolin on properties of agricultural ash blended geopolymers

C. Leonelli, T. Panyathanmaporn, P. Thavorniti, 2014 .

Development of Thai Lignite Fly Ash and Metakaolin for Pervious Geopolymer Concrete

P. Chindaprasirt, C. Leonelli, C. Tippayasam, 2018 .

Technological and Product Requirements for Fast Firing Glass‐Ceramic Glazes

L. Barbieri, C. Leonelli, T. Manfredini, 2008 .

Electrochemical impedance spectroscopy: A deeper and quantitative insight into the fingermarks physical modifications over time.

C. Leonelli, P. Veronesi, R. Giovanardi, 2017, Forensic science international.

Stabilization and thermal conductivity of aqueous magnetite nanofluid from continuous flows hydrothermal microwave synthesis

Marcello Romagnoli, Magdalena Lassinantti Gualtieri, C. Leonelli, 2016 .

Pair distribution function analysis and Mossbauer study of defects in microwave-hydrothermal LiFePO 4

C. Leonelli, P. Mustarelli, S. Ferrari, 2012 .

Enhancing hygroscopic capacities of metakaolin based porous insulating geopolymers: Comparative effects of calcium silicate and sodium polyacrylate

F. Andreola, C. Leonelli, S. Rossignol, 2023, Journal of Building Engineering.

Chromium liquid waste inertization in an inorganic alkali activated matrix: leaching and NMR multinuclear approach.

I. Lancellotti, L. Barbieri, C. Leonelli, 2015, Journal of Hazardous Materials.

Alkali-ions diffusion, mullite formation, and crystals dissolution during sintering of porcelain bodies: Microstructural approach

C. Leonelli, G. Pellacani, E. Kamseu, 2009 .

Ceramic technology and sustainable development

Cheeseman, Boccaccini, C. Leonelli, 2007 .

Extruded composite films based on polylactic acid and sodium alginate

C. Leonelli, P. Russo, C. Mortalò, 2023, Polymer.

Marble wastes recycling: Design and synthesis of low-temperature calcium silicate hydrate under various CaO:SiO2 ratio and alkalinity

C. Leonelli, V. Alzari, A. Mariani, 2021, Materialia.

Marble Wastes Recycling: Design and Synthesis of Low-Temperature Calcium Silicate Hydrate Under Various CaO:SiO 2 Ratio and Alkalinity

C. Leonelli, A. Mariani, R. Rosa, 2021 .

Non-incineration Microwave Assisted Sterilization of Medical Waste

Umberto Moscato, Angelo Cappi, U. Moscato, 2005, The Journal of microwave power and electromagnetic energy : a publication of the International Microwave Power Institute.