D. Irvine

发表

Understanding microwave heating effects in single mode type cavities-theory and experiment.

P. Licence, J. Robinson, S. Kingman, 2010, Physical chemistry chemical physics : PCCP.

Discovery of (meth)acrylate polymers that resist colonization by fungi associated with pathogenesis and biodeterioration

M. Alexander, D. Winkler, R. Wildman, 2020, Science Advances.

Synthesis, characterization and evaluation of in vitro toxicity in hepatocytes of linear polyesters with varied aromatic and aliphatic co-monomers.

S. Howdle, D. Irvine, C. Alexander, 2016, Journal of controlled release : official journal of the Controlled Release Society.

High-throughput characterization of fluid properties to predict droplet ejection for three-dimensional inkjet printing formulations

M. Alexander, R. Hague, R. Wildman, 2019, Additive Manufacturing.

Design and optimisation of a microwave reactor for kilo-scale polymer synthesis

A. Sklavounou, D. Irvine, G. Hargreaves, 2019, Chemical Engineering Science: X.

Optimised use of dielectric spectroscopy at microwave frequencies for direct online monitoring of polymerisation reactions

D. Irvine, G. Dimitrakis, A. Ilchev, 2019, Sensors and Actuators B: Chemical.

Selective molecular annealing: in situ small angle X-ray scattering study of microwave-assisted annealing of block copolymers.

Daniel T. W. Toolan, N. Terrill, D. Irvine, 2017, Physical chemistry chemical physics : PCCP.

Molecular Differentiated Initiator Reactivity in the Synthesis of Poly(caprolactone)-Based Hydrophobic Homopolymer and Amphiphilic Core Corona Star Polymers

S. Kingman, D. Irvine, G. Dimitrakis, 2015, Molecules.

Fire hazards and some common polymers

I. M. Robinson, D. Irvine, Derek J. Irvine, 2000 .

Wet and dry flexural high cycle fatigue behaviour of fully bioresorbable glass fibre composites: in-situ polymerisation versus laminate stacking

C. Rudd, Jiawa Lu, D. Irvine, 2017 .

New biomaterials from renewable resources – amphiphilic block copolymers from δ-decalactone

S. Howdle, D. Irvine, C. Alexander, 2015 .

Additive Manufacture of Three Dimensional Nanocomposite Based Objects through Multiphoton Fabrication

Emily F. Smith, R. Hague, R. Wildman, 2016, Polymers.

Preparation and characterization of composites using blends of divinylbenzene‐based hyperbranched and linear functionalized polymers

Sumaya F. Kabir, D. Irvine, A. Parsons, 2021, Polymers for Advanced Technologies.

Comparison of thermal, thermomechanical, and rheological properties of blends of divinylbenzene‐based hyperbranched and linear functionalized polymers

Sumaya F. Kabir, D. Irvine, A. Parsons, 2020, Journal of Applied Polymer Science.

The homo and copolymerisation of 2-(dimethylamino)ethyl methacrylate in supercritical carbon dioxide

Wenxin Wang, S. Howdle, S. Armes, 2003 .

Developing Echogenic Materials as Catheters for Use with Ultrasound.

D. Irvine, I. Ahmed, A. Whittington, 2022, ACS biomaterials science & engineering.

Catalytic Chain Transfer Mediated Autopolymerization of Divinylbenzene: Toward Facile Synthesis of High Alkene Functional Group Density Hyperbranched Materials

S. Howdle, D. Irvine, Ian A. Barker, 2012 .

Combinatorial discovery of polymers resistant to bacterial attachment

Robert Langer, Ying Mei, Andrew L. Hook, 2012, Nature Biotechnology.

Droplet Microfluidic Optimisation Using Micropipette Characterisation of Bio-Instructive Polymeric Surfactants

M. Alexander, Philip M Williams, R. Wildman, 2021, Molecules.

Inkjet based 3D Printing of bespoke medical devices that resist bacterial biofilm formation

M. Alexander, R. Hague, R. Wildman, 2020, bioRxiv.

Prediction of Broad-Spectrum Pathogen Attachment to Coating Materials for Biomedical Devices.

Andrew L. Hook, Daniel G. Anderson, R. Langer, 2018, ACS applied materials & interfaces.

Corrigendum: Combinatorial discovery of polymers resistant to bacterial attachment

Daniel G. Anderson, R. Langer, M. Alexander, 2014, Nature Biotechnology.

Direct 'in situ', low VOC, high yielding, CO2 expanded phase catalytic chain transfer polymerisation: towards scale-up.

Wenxin Wang, S. Howdle, D. Irvine, 2013, Dalton transactions.

Continuous and direct ‘in situ’ reaction monitoring of chemical reactions via dielectric property measurement: controlled polymerisation

E. Lester, J. Robinson, S. Kingman, 2014 .

Exemplification of catalyst design for microwave selective heating and its application to efficient in situ catalyst synthesis

Kaiyang Wang, D. Irvine, G. Dimitrakis, 2017 .

The influence of printing parameters on multi-material two-photon polymerisation based micro additive manufacturing

R. Hague, R. Wildman, C. Tuck, 2021, Additive Manufacturing.

Spectral normalisation by error minimisation for prediction of conversion in solvent-free catalytic chain transfer polymerisations

D. Irvine, K. Thurecht, I. Blakey, 2016 .

Transport and encapsulation of gold nanoparticles in carbon nanotubes.

P. D. Brown, G. Rance, D. Irvine, 2010, Nanoscale.

DEVELOPING AN IN-SITU POLYMERISATION PROCESS FOR BIOCOMPOSITE MANUFACTURE

C. Rudd, D. Irvine, A. Parsons, 2015 .

A Click Chemistry Strategy for the Synthesis of Efficient Photoinitiators for Two‐Photon Polymerization

Jonathan C. Moore, R. Wildman, G. Rance, 2020, Advanced Functional Materials.

Dispersion Polymerization of Methyl Methacrylate in Supercritical Carbon Dioxide: An Investigation into Stabilizer Anchor Group

S. Howdle, P. Licence, D. Irvine, 2005 .

Cyclisation of dienes using phosphorus-centred radicals to form organophosphorus adducts

D. Irvine, A. Routledge, A. Parsons, 2003 .

Molecular spectroscopic characterisation of poly(methyl methacrylate) generated by means of atom transfer radical polymerisation (ATRP)

Ian M. Priestnall, D. Irvine, A. T. Jackson, 2006 .

Radical Addition Reactions of Phosphorus Hydrides: Tuning the Reactivity of Phosphorus Hydrides, the Use of Microwaves and Horner–Wadsworth–Emmons‐Type Reactions

D. Irvine, A. Routledge, A. Parsons, 2006 .

In-situ polymerisation of fully bioresorbable polycaprolactone/phosphate glass fibre composites: In vitro degradation and mechanical properties.

C. Rudd, D. Irvine, A. Parsons, 2016, Journal of the mechanical behavior of biomedical materials.

Wet and Dry Flexural High Cycle Fatigue Behaviour of Fully 1 Bioresorbable Glass Fibre Composites : In-situ Polymerisation versus 2 Laminate Stacking

C. Rudd, Jiawa Lu, D. Irvine, 2017 .

Exploiting Generative Design for Multi-Material Inkjet 3D Printed Cell Instructive, Bacterial Biofilm Resistant Composites

Andrew L. Hook, M. Alexander, R. Hague, 2020 .

Facile Synthesis of Functionalised Hyperbranched Polymers for Application as Novel, Low Viscosity Lubricant Formulation Components

Sorin V Filip, D. Irvine, N. Aragrag, 2022, Polymers.

The influence of domain segregation in ionic liquids upon controlled polymerisation mechanisms: RAFT polymerisation

P. Licence, D. Irvine, K. Thurecht, 2013 .

NMR as a probe of nanostructured domains in ionic liquids: Does domain segregation explain increased performance of free radical polymerisation?

P. Licence, A. Whittaker, D. Irvine, 2011 .

A new particle mounting method for surface analysis

M. Alexander, R. Wildman, D. Scurr, 2021, Surface and Interface Analysis.

Controlled polymerisation and purification of branched poly(lactic acid) surfactants in supercritical carbon dioxide

S. Howdle, D. Irvine, B. Quilty, 2016 .

Solvent-free manufacture of methacrylate polymers from biomass pyrolysis products

D. Irvine, E. Binner, D. D. De Focatiis, 2021, Reaction Chemistry & Engineering.

Property enhancement of healable supramolecular polyurethanes

K. Shankland, R. Wildman, D. Irvine, 2019, European Polymer Journal.

A Reactive Prodrug Ink Formulation Strategy for Inkjet 3D Printing of Controlled Release Dosage Forms and Implants

R. Hague, R. Wildman, C. Tuck, 2020 .

Synthesis of Methacrylate-Terminated Block Copolymers with Reduced Transesterification by Controlled Ring-Opening Polymerization

R. Wildman, D. Irvine, C. Alexander, 2018, Macromolecular Chemistry and Physics.

P2EM.9 - Direct Online Monitoring of E-caprolactone Polymerisation via Dielectric Property Measurement

D. Irvine, G. Dimitrakis, A. Ilchev, 2018 .

Continuous direct on-line reaction monitoring of a controlled polymerisationvia dielectric measurement

E. Lester, J. Robinson, S. Kingman, 2011 .

Utilization of Dielectric Properties Assessment To Evaluate the Catalytic Activity and Rate of Deactivation of Heterogeneous Catalysts

D. Irvine, G. Dimitrakis, C. Matei, 2017 .

Synthesis of New Acrylate-Based Nonionic Surfmers and Their Use in Heterophase Polymerization

L. Mathias, D. Irvine, J. Morizur, 2007 .

Temperature dependence of the dielectric properties of 2,2'-azobis(2- methyl-butyronitrile)(AMBN)

E. Lester, J. Robinson, S. Kingman, 2010 .

New thiolate-cobalt(II) complexes for catalytic chain transfer polymerization of methyl methacrylate

Wenxin Wang, S. Howdle, D. Irvine, 2004 .

Enhanced ‘in situ’ catalysis via microwave selective heating: catalytic chain transfer polymerisation

J. Robinson, S. Kingman, D. Irvine, 2014 .

Continuous synthesis of dispersant-coated hydroxyapatite plates

Edward Lester, David M. Grant, Miquel Gimeno-Fabra, 2015 .

Phosphonyl radical addition to enol ethers. The stereoselective synthesis of cyclic ethers

D. Irvine, A. Routledge, A. Parsons, 2004 .

Ethoxycarbonyl-, cyano- and methoxy-methyl complexes of nickel(II) and their carbonylation reactions

D. Irvine, E. Carmona, D. Knight, 1992 .

On DABAL-Me3 promoted formation of amides

D. Irvine, S. Woodward, T. Mcinally, 2013 .

Reactions of [RuCl2(PPh3)4] with mixed anhydrides of diphenylphosphinous and acrylic acids; structure of [RuCl{(Ph2PO)2H}(PPh3)(O2CCH2CH2PPh3)]·C4H8O

J. C. Barnes, D. Irvine, D. Cole-Hamilton, 1991 .

Radical addition reactions of chiral phosphorus hydrides

D. Irvine, A. Routledge, A. Parsons, 2003 .

Continuous Acid-Catalyzed Methylations in Supercritical Carbon Dioxide: Comparison of Methanol, Dimethyl Ether and Dimethyl Carbonate as Methylating Agents

Martyn Poliakoff, Richard A. Bourne, M. Poliakoff, 2010 .

Dielectric Properties of Free Radical Initiators—Investigation of Thermal Decomposition Products

J. Robinson, S. Kingman, D. Irvine, 2012 .

The importance of ionic conduction in microwave heated polyesterifications

D. Irvine, G. Dimitrakis, G. Hargreaves, 2020 .

Facile Determination of Molecular Structure Trends in Amphiphilic Core Corona Star Polymer Synthesis via Dielectric Property Measurement.

D. Irvine, G. Dimitrakis, J. Katrib, 2016, Macromolecular rapid communications.

Understanding the acceleration in the ring-opening of lactones delivered by microwave heating

J. Robinson, S. Kingman, D. Irvine, 2014 .

Mechanistic Investigation into the Accelerated Synthesis of Methacrylate Oligomers via the Application of Catalytic Chain Transfer Polymerization and Selective Microwave Heating

J. Robinson, S. Kingman, D. Irvine, 2013 .

Making Tablets for Delivery of Poorly Soluble Drugs Using Photoinitiated 3D Inkjet Printing.

Martin J. Wallace, M. Alexander, R. Wildman, 2019, International journal of pharmaceutics.

Evidence for the low thermal stability of poly(methyl methacrylate) polymer produced by atom transfer radical polymerisation

D. Irvine, A. L. Cutter, A. T. Jackson, 2000 .

A review of cathodic protection of reinforced concrete

B. S. Wyatt, D. J. Irvine, D. Irvine, 1987 .

Linkage isomerism in rhodium(I) complexes of mixed anhydrides of diphenylphosphinous and acrylic acids: crystal and molecular structure of [RhCl(PPh3)(Ph2PO2CCHCHMe)]

D. Irvine, A. Iraqi, M. Hursthouse, 1990 .

Co-ordination, isomerisation and disruption of the ligands Ph2PO2C(CH2)nCHCH2(n= 0 or 1). X-Ray crystal and molecular structure of chloro(tetraphenyldiphosphoxane-κ2P,P′)(triphenylphosphine)rhodium(I)–tetrahydrofuran (1/1)

J. C. Barnes, C. Glidewell, D. Irvine, 1991 .

Linkage Isomerism in Rhodium(I) Complexes of Mixed Anhydrides of Diphenylphosphinous and Acrylic Acids: Crystal and Molecular Structure of (RhCl(PPh3)(Ph2PO2CCH=CHMe)).

D. Irvine, A. Iraqi, M. Hursthouse, 1990 .

Notes. Upon the fluxionality of [RhCl(PPh3)(Ph2PO2CCHCHMe)]

D. Irvine, D. Cole-Hamilton, A. Borowski, 1990 .

Metal promoted rearrangement of Ph2PO2CCHCH2 crystal and molecular structure of [RhCl(Ph2POPPh2)(PPh3)l · THF, tetraphenyldiphosphoxane-triphenylphosphine chlororhodium(I) (tetrahydrofuran) 1:1

J. C. Barnes, D. Irvine, D. Cole-Hamilton, 1989 .

Interfacial properties of phosphate glass fibres/PLA composites: Effect of the end functionalities of oligomeric PLA coupling agents

Chris D. Rudd, Ifty Ahmed, Andrew J. Parsons, 2010 .

The influence of dispersant concentration on the pore morphology of hydroxyapatite ceramics for bone tissue engineering.

K. Shakesheff, S. Howdle, D. Irvine, 2005, Biomaterials.

Versatile, Highly Controlled Synthesis of Hybrid (Meth)acrylate–Polyester–Carbonates and their Exploitation in Tandem Post‐Polymerization–Functionalization

S. Howdle, D. Irvine, C. Alexander, 2019, Macromolecular Chemistry and Physics.

Grafting polymers by enzymatic ring opening polymerisation—maximising the grafting efficiency

S. Howdle, D. Irvine, S. Villarroya, 2008 .

Modelling the influence of UV curing strategies for optimisation of inkjet based 3D printing

R. Hague, R. Wildman, M. Baumers, 2021 .

Effect of Low Molecular Weight Carboxylic Acids on Hydraulic Pump Wear

R. J. Bishop, D. P. Braniff, G. Totten, 1994 .

Free radical polymerization of methyl methacrylate in supercritical carbon dioxide using a pseudo-graft stabilizer : Effect of monomer, initiator, and stabilizer concentrations

S. Howdle, D. Irvine, R. Major, 2000 .

Extrusion 3D Printing of Paracetamol Tablets from a Single Formulation with Tunable Release Profiles Through Control of Tablet Geometry

Ricky D. Wildman, Morgan R. Alexander, Martin J. Wallace, 2018, AAPS PharmSciTech.

Extrusion 3 D printing of paracetamol tablets from a single formulation with 1 tunable release profiles through control of tablet geometry 2

M. Alexander, R. Wildman, C. Roberts, 2018 .

Controlling Chain Growth: A New Strategy to Hyperbranched Materials

Wenxin Wang, S. Howdle, D. Irvine, 2007 .

The effect of double-bond geometry on the crystallographic conformations of two enopyranuronates

J. C. Barnes, J. S. Brimacombe, D. Irvine, 1990 .

Ring opening polymerisation of ɛ-caprolactone with novel microwave magnetic heating and cyto-compatible catalyst

Kaiyang Wang, D. Irvine, G. Dimitrakis, 2023, Frontiers in Bioengineering and Biotechnology.

Predicting the behaviour of near-critical and supercritical alcohols at microwave frequencies: Validation of molecular dynamic simulations as a tool that can substitute for measurements under extreme experimental conditions

E. Lester, J. Robinson, S. Kingman, 2019, The Journal of Supercritical Fluids.

Electromagnetic simulations of microwave heating experiments using reaction vessels made out of silicon carbide.

P. Licence, J. Robinson, S. Kingman, 2010, Physical chemistry chemical physics : PCCP.

Self-optimizing continuous reactions in supercritical carbon dioxide.

Martyn Poliakoff, Geoffrey R Akien, M. Poliakoff, 2011, Angewandte Chemie.

Extrusion 3D Printing of Paracetamol Tablets from a Single Formulation with Tunable Release Profiles Through Control of Tablet Geometry

Martin J. Wallace, M. Alexander, R. Wildman, 2018, AAPS PharmSciTech.

Discovery of a Novel Polymer for Xeno-free, Long-term Culture of Human Pluripotent Stem Cell Expansion

M. Alexander, D. Irvine, C. Denning, 2020, bioRxiv.

Sustainable terpene triblock copolymers with tuneable properties for pressure sensitive adhesive applications

S. Howdle, D. Irvine, D. D. De Focatiis, 2022, Polymer Testing.

Influence of compatibilizing agent molecular structure on the mechanical properties of phosphate glass fiber‐reinforced PLA composites

Chris D. Rudd, Kristofer J. Thurecht, Ifty Ahmed, 2010 .

Synthesis and control of crosslinked poly(acrylic acid) based viscosity modifiers using dense phase carbon dioxide as a solvent

S. Howdle, D. Irvine, J. Duncan, 2018, The Journal of Supercritical Fluids.

Facile one-spot synthesis of highly branched polycaprolactone

S. Howdle, D. Irvine, K. Thurecht, 2014 .

Preparation of cross-linked microparticles of poly(glycidyl methacrylate) by dispersion polymerization of glycidyl methacrylate using a PDMS macromonomer as stabilizer in supercritical carbon dioxide

Wenxin Wang, S. Howdle, D. Irvine, 2002 .

Dispersion Polymerization of Methyl Methacrylate in Supercritical Carbon Dioxide with a Monofunctional Pseudo-Graft Stabilizer

S. Howdle, D. Irvine, Paul Christian and, 2000 .

Ink-jet 3D printing as a strategy for developing bespoke non-eluting biofilm resistant medical devices

M. Alexander, R. Hague, R. Wildman, 2021, Biomaterials.

RAFT polymerisation of renewable terpene (meth)acrylates and the convergent synthesis of methacrylate–acrylate–methacrylate triblock copolymers

Daniel T. W. Toolan, S. Howdle, M. Derry, 2021, Polymer Chemistry.

A facile and green route to terpene derived acrylate and methacrylate monomers and simple free radical polymerisation to yield new renewable polymers and coatings

José A. Souto, S. Howdle, D. Irvine, 2016 .

Biodegradable Core-Shell Materials via RAFT and ROP: Characterization and Comparison of Hyperbranched and Microgel Particles

S. Howdle, D. Irvine, Yu Zheng, 2011 .

Synthesis of Well-Defined Macromonomers by Sequential ATRP−Catalytic Chain Transfer and Copolymerization with Ethyl Acrylate

D. Irvine, A. Slark, S. Moratti, 2002 .

α,ω-dicarboxyl telechelic poly(methyl methacrylate) via radical addition-fragmentation polymerization

D. Irvine, D. Haddleton, D. Kukulj, 1998 .

Generation and Characterization of a Library of Novel Biologically Active Functional Surfactants (Surfmers) Using Combined High-Throughput Methods.

M. Alexander, T. Nisisako, R. Wildman, 2021, ACS applied materials & interfaces.

Achieving Microparticles with Cell‐Instructive Surface Chemistry by Using Tunable Co‐Polymer Surfactants

M. Alexander, A. Ghaemmaghami, P. Williams, 2020, Advanced Functional Materials.

3D printing of tablets using inkjet with UV photoinitiation.

Ricky D. Wildman, Morgan R. Alexander, Richard J.M. Hague, 2017, International journal of pharmaceutics.

Rheology of polyacrylate binders produced via catalytic chain transfer polymerization as an alternative to bitumen in road pavement materials

D. Irvine, J. Grenfell, G. Airey, 2011 .

UV-curable silicone materials with tuneable mechanical properties for 3D printing

R. Hague, R. Wildman, C. Tuck, 2021, Materials & Design.

Discovery of a polymer resistant to bacterial biofilm, swarming, and encrustation

D. Humes, M. Alexander, A. Hook, 2023, Science advances.

3D and 4D printing of biomaterials and biocomposites, bioinspired composites, and related transformers

R. Wildman, D. Irvine, W. Hayes, 2020 .

Free-Radical Polymerization in Ionic Liquids : The Case for a Protected Radical

P. Licence, D. Irvine, K. Thurecht, 2008 .

Controlled oligomerisation of isoprene-towards the synthesis of squalene analogues

S. Howdle, D. Irvine, Jaouad El harfi, 2012 .

Synthesis of water-soluble surfactants using catalysed condensation polymerisation in green reaction media†

S. Howdle, D. Irvine, Vincenzo Taresco, 2021, Polymer chemistry.

RAFT-functional ionic liquids: towards understanding controlled free radical polymerisation in ionic liquids

P. Licence, D. Irvine, K. Thurecht, 2009 .

Discovery of hemocompatible bacterial biofilm-resistant copolymers

Andrew L. Hook, M. Maitz, M. Alexander, 2020, Biomaterials.

Combinatorial discovery of novel polymers resistant to bacterial attachment

Andrew L. Hook, Daniel G. Anderson, R. Langer, 2012 .

Molecular Design of Squalene/Squalane Countertypes via the Controlled Oligomerization of Isoprene and Evaluation of Vaccine Adjuvant Applications.

D. Irvine, C. Fox, J. Guderian, 2016, Biomacromolecules.

Synthesis of model terpene-derived copolymers in supercritical carbon dioxide for cosmetic applications

S. Howdle, D. Irvine, V. Jeanne-Rose, 2021, European Polymer Journal.

Validating a Predictive Structure–Property Relationship by Discovery of Novel Polymers which Reduce Bacterial Biofilm Formation

Andrew L. Hook, M. Alexander, A. Hook, 2019, Advanced materials.

Sustainable ABA Triblock Methacrylate Copolymers Incorporating both High and Low Tg Terpene-Derived Monomers

Daniel T. W. Toolan, S. Howdle, M. Derry, 2022, European Polymer Journal.

Amphiphilic block copolymers from a renewable ε-decalactone monomer: prediction and characterization of micellar core effects on drug encapsulation and release.

S. Howdle, D. Irvine, C. Alexander, 2016, Journal of materials chemistry. B.

Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction

Emily F. Smith, R. Hague, M. Fay, 2017, Scientific Reports.

Adaptive Process Optimization for Continuous Methylation of Alcohols in Supercritical Carbon Dioxide

Martyn Poliakoff, Richard A. Bourne, M. Poliakoff, 2011 .

Identification of Novel "Inks" for 3D Printing Using High-Throughput Screening: Bioresorbable Photocurable Polymers for Controlled Drug Delivery.

M. Alexander, R. Hague, R. Wildman, 2018, ACS applied materials & interfaces.

An imidazolium-based supramolecular gelator enhancing interlayer adhesion in 3D printed dual network hydrogels

D. Amabilino, R. Wildman, C. Tuck, 2021, Materials & Design.

Application of Targeted Molecular and Material Property Optimization to Bacterial Attachment-Resistant (Meth)acrylate Polymers.

R. Langer, M. Alexander, M. Davies, 2016, Biomacromolecules.

Predictive Molecular Design and Structure–Property Validation of Novel Terpene-Based, Sustainably Sourced Bacterial Biofilm-Resistant Materials

Jonathan C. Moore, M. Alexander, S. Howdle, 2023, Biomacromolecules.

Methodology for the synthesis of methacrylate monomers using designed single mode microwave applicators

Andrew L. Hook, M. Alexander, A. Hook, 2019, Reaction Chemistry & Engineering.

The polymerisation of functionalised methacrylate monomers in supercritical carbon dioxide

S. Howdle, D. Irvine, M. Giles, 2003 .

Innate immune cell instruction using micron-scale 3D objects of varied architecture and polymer chemistry: The ChemoArchiChip

M. Alexander, R. Hague, A. Ghaemmaghami, 2023, Matter.

Exploiting Generative Design for 3D Printing of Bacterial Biofilm Resistant Composite Devices

Andrew L. Hook, M. Alexander, R. Hague, 2021, Advanced science.

Green Chemistry c 6 gc 00745 g 1 Controlled polymerisation and puri fi cation of branched poly ( lactic acid ) surfactants in supercritical carbon dioxide

Goddard, S. Howdle, D. Irvine, 2016 .

Microparticles Decorated with Cell-Instructive Surface Chemistries Actively Promote Wound Healing.

M. Alexander, A. Ghaemmaghami, R. Wildman, 2022, Advanced materials.

Strategies for Integrating Metal Nanoparticles with Two‐Photon Polymerization Process: Toward High Resolution Functional Additive Manufacturing

R. Hague, R. Wildman, C. Tuck, 2023, Advanced Functional Materials.

Application of Targeted Molecular and Material Property Optimization to Bacterial Attachment-Resistant (Meth)acrylate Polymers.

Andrew L. Hook, R. Langer, M. Davies, 2016, Biomacromolecules.

Transport and encapsulation of gold nanoparticles in carbon nanotubes.

G. Rance, D. Irvine, A. Khlobystov, 2010, Nanoscale.