M. El-Rich

发表

Muscle Activity, Internal Loads, and Stability of the Human Spine in Standing Postures: Combined Model and In Vivo Studies

A. Shirazi-Adl, N. Arjmand, M. El-Rich, 2004, Spine.

Numerical Investigation of Intra-abdominal Pressure Effects on Spinal Loads and Load-Sharing in Forward Flexion

K. Khalaf, S. Adeeb, M. El-Rich, 2019, Front. Bioeng. Biotechnol..

Spinal loads and trunk muscles forces during level walking - A combined in vivo and in silico study on six subjects.

F. Di Puccio, R. Arshad, M. El-Rich, 2017, Journal of biomechanics.

Load-sharing in the lumbosacral spine in neutral standing & flexed postures - A combined finite element and inverse static study.

K. Khalaf, M. El-Rich, Tao Liu, 2017, Journal of biomechanics.

Sensitivity of lumbar spine response to follower load and flexion moment: finite element study

Sadegh Naserkhaki, Marwan El-Rich, M. El-Rich, 2017, Computer methods in biomechanics and biomedical engineering.

On the load-sharing along the ligamentous lumbosacral spine in flexed and extended postures: Finite element study.

Samer Adeeb, Jacob L Jaremko, Sadegh Naserkhaki, 2016, Journal of biomechanics.

Effects of inter-individual lumbar spine geometry variation on load-sharing: Geometrically personalized Finite Element study.

Jacob L Jaremko, Sadegh Naserkhaki, Marwan El-Rich, 2016, Journal of biomechanics.

Effect of load position on muscle forces, internal loads and stability of the human spine in upright postures

A Shirazi-Adl, A. Shirazi-Adl, M. El-Rich, 2005, Computer methods in biomechanics and biomedical engineering.

Muscle force evaluation and the role of posture in human lumbar spine under compression

M. Parnianpour, A. Shirazi-Adl, D. Pop, 2002, European Spine Journal.

Investigation of impact loading rate effects on the ligamentous cervical spinal load-partitioning using finite element model of functional spinal unit C2-C3.

M. El-Rich, T. Mustafy, W. Mesfar, 2014, Journal of biomechanics.

The influence of cell micro-structure on the in-plane dynamic crushing of honeycombs with negative Poisson’s ratio

M. El-Rich, Xin-chun Zhang, L. An, 2015 .

Symmetry analysis of talus bone

S. Adeeb, M. El-Rich, K. Islam, 2014, Bone & joint research.

An in vitro study on the dimensional stability of a vinyl polyether silicone impression material over a prolonged storage period.

S. Adeeb, M. El-Rich, U. Nassar, 2013, The Journal of prosthetic dentistry.

Prediction of mechanical behavior of cartilaginous infant hips in pavlik harness: A subject‐specific simulation study on normal and dysplastic hips

J. Jaremko, S. Adeeb, M. El-Rich, 2019, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Hip Joint Contact Pressure Distribution During Pavlik Harness Treatment of an Infant Hip: A Patient-Specific Finite Element Model.

J. Jaremko, S. Adeeb, M. El-Rich, 2018, Journal of biomechanical engineering.

Finite element investigation of the loading rate effect on the spinal load-sharing changes under impact conditions.

Pierre-Jean Arnoux, Carl-Eric Aubin, Christian Brunet, 2009, Journal of biomechanics.

Sensitivity of the Cervical Disc Loads, Translations, Intradiscal Pressure, and Muscle Activity Due to Segmental Mass, Disc Stiffness, and Muscle Strength in an Upright Neutral Posture

R. Arshad, M. El-Rich, H. Schmidt, 2022, Frontiers in Bioengineering and Biotechnology.

Effects of eight different ligament property datasets on biomechanics of a lumbar L4-L5 finite element model.

N Arjmand, F Farahmand, A Shirazi-Adl, 2017, Journal of biomechanics.

Investigation of the geometries of the coronoid process and the fibular allograft as a potential surgical replacement.

S. Adeeb, M. El-Rich, D. Sheps, 2013, Clinical biomechanics.

Effects of lumbo-pelvic rhythm on trunk muscle forces and disc loads during forward flexion: A combined musculoskeletal and finite element simulation study.

K. Khalaf, S. Adeeb, M. El-Rich, 2019, Journal of biomechanics.

Biomechanical response of intact, degenerated and repaired intervertebral discs under impact loading - Ex-vivo and In-Silico investigation.

M. Nikkhoo, M. Parnianpour, K. Khalaf, 2018, Journal of biomechanics.

Investigation of the Average Shape and Principal Variations of the Human Talus Bone Using Statistic Shape Model

Samer Adeeb, Lindsey Westover, Tao Liu, 2020, Frontiers in Bioengineering and Biotechnology.

Polycarbonate-urethane coating can significantly improve talus implant contact characteristics.

Maha S. Ead, S. Adeeb, M. El-Rich, 2021, Journal of the mechanical behavior of biomedical materials.

Geometric analysis of the talus and development of a generic talar prosthetic.

S. Adeeb, M. El-Rich, S. Dhillon, 2017, Foot and ankle surgery : official journal of the European Society of Foot and Ankle Surgeons.

Analysis of four methods of measuring three-dimensional pelvic tilt in the lateral decubitus position

Lindsey Westover, Lauren Beaupre, Meredith Stadnyk, 2020, Medical & Biological Engineering & Computing.

Finite Element Investigation of the Effects of the Cup Orientation on Implant Load-bearing in Total Hip Resurfacing

M. El-Rich, J. Powell, A. Komeili, 2017 .

A Framework for Determining the Performance and Requirements of Cable-Driven Mobile Lower Limb Rehabilitation Exoskeletons

Mohammad I. Awad, Umer Huzaifa, K. Khalaf, 2022, Frontiers in Bioengineering and Biotechnology.

Micro-scale finite element modeling of ultrasound propagation in aluminum trabecular bone-mimicking phantoms: A comparison between numerical simulation and experimental results.

L. Le, S. Adeeb, T. N. Tran, 2016, Ultrasonics.

The evaluation of artificial talus implant on ankle joint contact characteristics: a finite element study based on four subjects

S. Adeeb, M. El-Rich, Tao Liu, 2022, Medical & Biological Engineering & Computing.

Finite element analysis of mechanical behavior of human dysplastic hip joints: a systematic review.

J. Jaremko, S. Adeeb, M. El-Rich, 2017, Osteoarthritis and cartilage.

Computational modelling of hip resurfacing arthroplasty investigating the effect of femoral version on hip biomechanics

S. Adeeb, M. El-Rich, S. Naserkhaki, 2021, PloS one.

Development of a novel geometrically-parametric patient-specific finite element model to investigate the effects of the lumbar lordosis angle on fusion surgery.

M. Nikkhoo, Chih-Hsiu Cheng, C. Niu, 2020, Journal of biomechanics.

Development and validation of a geometrically personalized finite element model of the lower ligamentous cervical spine for clinical applications

Jaw-Lin Wang, Mohammad Nikkhoo, Kinda Khalaf, 2019, Comput. Biol. Medicine.

Spinal muscle forces, internal loads and stability in standing under various postures and loads—application of kinematics-based algorithm

M. Parnianpour, A. Shirazi-Adl, M. Parnianpour, 2005, European Spine Journal.

Internal load-sharing in the human passive lumbar spine: Review of in vitro and finite element model studies.

Aboulfazl Shirazi-Adl, Hendrik Schmidt, Marwan El-Rich, 2019, Journal of biomechanics.

A biomechanical study of L5-S1 low-grade isthmic spondylolisthesis using a personalized finite element model.

C. Aubin, I. Villemure, H. Labelle, 2006, Studies in health technology and informatics.

A framework for evaluating muscle activity during repetitive manual material handling in construction manufacturing

Mustafa Gul, Xinming Li, Marwan El-Rich, 2017 .

Leg dominance may not be a predictor of asymmetry in peak joint moments and ground reaction forces during sit-to-stand movements.

Jonathon S. Schofield, J. Carey, S. Adeeb, 2014, Journal of applied biomechanics.

Analysis of a generic talar prosthetic with a biological talus: A cadaver study.

Troy D. Bornes, S. Dhillon, S. Adeeb, 2018, Journal of orthopaedics.

Surface topography asymmetry maps categorizing external deformity in scoliosis.

Samer Adeeb, Marc Moreau, Marwan El-Rich, 2014, The spine journal : official journal of the North American Spine Society.

Correlation Between a Novel Surface Topography Asymmetry Analysis and Radiographic Data in Scoliosis

Samer Adeeb, Lindsey Westover, Marwan El-Rich, 2015, Spine deformity.

Asymmetry Assessment Using Surface Topography in Healthy Adolescents

Samer Adeeb, Eric C. Parent, Douglas Hedden, 2015, Symmetry.

Monitoring for idiopathic scoliosis curve progression using surface topography asymmetry analysis of the torso in adolescents.

Samer Adeeb, Lindsey Westover, Marwan El-Rich, 2015, The spine journal : official journal of the North American Spine Society.

The finite element method for micro-scale modeling of ultrasound propagation in cancellous bone.

S. Adeeb, M. El-Rich, T. El-Bialy, 2014, Ultrasonics.

Simulation of Low-Intensity Ultrasound Propagating in a Beagle Dog Dentoalveolar Structure to Investigate the Relations between Ultrasonic Parameters and Cementum Regeneration.

S. Adeeb, M. El-Rich, T. El-Bialy, 2015, Ultrasound in medicine & biology.

The importance of intervertebral disc material model on the prediction of mechanical function of the cervical spine

M. El-Rich, A. Rasoulian, A. Komeili, 2021, BMC Musculoskeletal Disorders.

Injury mechanisms of the ligamentous cervical C2-C3 Functional Spinal Unit to complex loading modes: Finite Element study.

Samer Adeeb, Marwan El-Rich, Kodjo Moglo, 2016, Journal of the mechanical behavior of biomedical materials.

A geometric approach to study the contact mechanisms in the patellofemoral joint of normal versus patellofemoral pain syndrome subjects

J. Ronsky, S. Adeeb, M. El-Rich, 2015, Computer methods in biomechanics and biomedical engineering.

Ergonomic Analysis and the Need for Its Integration for Planning and Assessing Construction Tasks

Mohamed Al-Hussein, Saad H.S. Al-Jibouri, Ndukeabasi Inyang, 2012 .

Three-dimensional geometric analysis of the talus for designing talar prosthetics

Kajsa Duke, Samer Adeeb, Marwan El-Rich, 2014, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Intra-operator and inter-operator reliability, and CT scan repeatability in 3D modelling of talus bone using CT imaging

Samer Adeeb, Marwan El-Rich, Sukhvinder Dhillon, 2017, Comput. methods Biomech. Biomed. Eng. Imaging Vis..

Calibration of hyperelastic material properties of the human lumbar intervertebral disc under fast dynamic compressive loads.

Pierre-Jean Arnoux, Carl-Eric Aubin, Eric Wagnac, 2011, Journal of biomechanical engineering.

Characterizing asymmetry across the whole sit to stand movement in healthy participants.

Jonathon S. Schofield, J. Carey, S. Adeeb, 2013, Journal of biomechanics.

Surface topography asymmetry maps categorizing external deformity in scoliosis.

S. Adeeb, M. El-Rich, E. Parent, 2014, The spine journal : official journal of the North American Spine Society.

Assisting Stroke Gait with Cable Driven Lower Limb Rehabilitation Exoskeleton (C-LREX): Simulation Study

Mohammad I. Awad, M. El-Rich, Rajan Prasad, 2023, ICBET.

Development and validation of a novel ankle joint musculoskeletal model

S. Adeeb, M. El-Rich, N. Jomha, 2024, Medical Biol. Eng. Comput..

Sensitivity of subject-specific upper body musculoskeletal model predictions to mass scaling methods

M. El-Rich, Tao Liu, Abdul Aziz Hulleck, 2023, Comput. Biol. Medicine.

3D Visualization-Based Ergonomic Risk Assessment and Work Modification Framework and Its Validation for a Lifting Task

Mohamed Al-Hussein, Mustafa Gul, Xinming Li, 2018 .

COMPUTER 3D MODEL-BASED PHYSCIAL DEMAND AND ERGONOMIC ASSESSMENT OF BUILDINGS MECHANICAL SYSTEM CONSTRUCTION

Mohamed Al-Hussein, Marwan El-Rich, S Hyeok Han, 2011 .

Muscle-inspired bi-planar cable routing: a novel framework for designing cable driven lower limb rehabilitation exoskeletons (C-LREX)

M. El-Rich, Sunil K. Agrawal, Rajan Prasad, 2024, Scientific reports.

Influence of Controller on Cable Driven Lower Limb Rehabilitation Exoskeleton (C-LREX): PD vs MPC

Mohammad I. Awad, M. El-Rich, Rajan Prasad, 2023, 2023 9th International Conference on Control, Decision and Information Technologies (CoDIT).

Bi-Planar Trajectory Tracking with a Novel 3DOF Cable Driven Lower Limb Rehabilitation Exoskeleton (C-LREX)

Mohammad I. Awad, K. Khalaf, M. El-Rich, 2023, Sensors.

A Generalized Framework for the Assessment of Various Configurations of Cable-Driven Mobile Lower Limb Rehabilitation Exoskeletons

Umer Huzaifa, K. Khalaf, M. El-Rich, 2022, ICBET.

Leg dominance may not be a predictor of asymmetry in peak joint moments and ground reaction forces during sit-to-stand movements.

Jonathon S. Schofield, J. Carey, S. Adeeb, 2014, Journal of applied biomechanics.