H. Schmidt

H. Schmidt, M. Kreinest, Jeronimo O N Weerts, 2017, European journal of emergency medicine : official journal of the European Society for Emergency Medicine.

Remedy for fictive negative pressures in biphasic finite element models of the intervertebral disc during unloading

Aboulfazl Shirazi-Adl, Fabio Galbusera, Hendrik Schmidt, 2011, Computer methods in biomechanics and biomedical engineering.

Numerical simulations of bone remodelling and formation following nucleotomy.

Sandra Reitmaier, H. Schmidt, Maxim Bashkuev, 2019, Journal of biomechanics.

Comparison of three validated systems to analyse spinal shape and motion

M. Dreischarf, H. Schmidt, M. Pumberger, 2022, Scientific Reports.

Effect of arm swinging on lumbar spine and hip joint forces.

F. Di Puccio, P. Damm, R. Arshad, 2017, Journal of biomechanics.

Prediction of the human thoracic and lumbar articular facet joint morphometry from radiographic images

H. Wilke, H. Schmidt, M. Kunkel, 2011, Journal of anatomy.

Sex-dependent differences in lumbo-pelvic coordination for different lifting tasks: A study on asymptomatic adults.

H. Schmidt, T. Zander, A. Firouzabadi, 2019, Journal of biomechanics.

Normal trabecular vertebral bone is formed via rapid transformation of mineralized spicules: A high-resolution 3D ex-vivo murine study.

S. Mundlos, P. Fratzl, G. Duda, 2019, Acta biomaterialia.

What does the shape of our back tell us? Correlation between sacrum orientation and lumbar lordosis.

Sandra Reitmaier, C. Maier, H. Schmidt, 2017, The spine journal : official journal of the North American Spine Society.

Differences between clinical "snap-shot" and "real-life" assessments of lumbar spine alignment and motion - What is the "real" lumbar lordosis of a human being?

M. Dreischarf, H. Schmidt, Maxim Bashkuev, 2016, Journal of biomechanics.

Relationship between intervertebral disc and facet joint degeneration: A probabilistic finite element model study.

Sandra Reitmaier, H. Schmidt, Maxim Bashkuev, 2019, Journal of biomechanics.

Spinal Deformity Surgery: A Critical Review of Alignment and Balance

H. Schmidt, M. Pumberger, M. Putzier, 2018, Asian spine journal.

How do we stand? Variations during repeated standing phases of asymptomatic subjects and low back pain patients.

F. Graichen, Sandra Reitmaier, C. Maier, 2017, Journal of biomechanics.

Hydrogels for nucleus replacement--facing the biomechanical challenge.

H. Wilke, U. Wolfram, Sandra Reitmaier, 2012, Journal of the mechanical behavior of biomedical materials.

Comparison of eight published static finite element models of the intact lumbar spine: predictive power of models improves when combined together.

A Rohlmann, J. P. Little, V K Goel, 2014, Journal of biomechanics.

Finite element study of human lumbar disc nucleus replacements

H. Wilke, A. Shirazi-Adl, H. Schmidt, 2014, Computer methods in biomechanics and biomedical engineering.

Is the ovine intervertebral disc a small human one? A finite element model study.

Hendrik Schmidt, Sandra Reitmaier, H. Schmidt, 2013, Journal of the mechanical behavior of biomedical materials.

Antonius Rohlmann, Marcel Dreischarf, Hendrik Schmidt, 2014, PloS one.

Estimation of loads on human lumbar spine: A review of in vivo and computational model studies.

Antonius Rohlmann, Marcel Dreischarf, Aboulfazl Shirazi-Adl, 2016, Journal of biomechanics.

Stepwise reduction of functional spinal structures increase range of motion and change lordosis angle.

Lutz Claes, Hendrik Schmidt, Frank Heuer, 2007, Journal of biomechanics.

Internal load-sharing in the human passive lumbar spine: Review of in vitro and finite element model studies.

Aboulfazl Shirazi-Adl, Hendrik Schmidt, Marwan El-Rich, 2019, Journal of biomechanics.

Monitoring the load on a telemeterised vertebral body replacement for a period of up to 65 months

G. Bergmann, F. Graichen, A. Rohlmann, 2013, European Spine Journal.

Considerations when loading spinal finite element models with predicted muscle forces from inverse static analyses.

A. Rohlmann, R. Zhu, G. Duda, 2013, Journal of biomechanics.

Response analysis of the lumbar spine during regular daily activities--a finite element analysis.

Aboulfazl Shirazi-Adl, Fabio Galbusera, Hendrik Schmidt, 2010, Journal of biomechanics.

Interaction Between Finite Helical Axes and Facet Joint Forces Under Combined Loading

Hendrik Schmidt, Frank Heuer, Hans-Joachim Wilke, 2008, Spine.

The risk of disc prolapses with complex loading in different degrees of disc degeneration - a finite element analysis.

Lutz Claes, Antonius Rohlmann, Hendrik Schmidt, 2007, Clinical biomechanics.

A new laser scanning technique for imaging intervertebral disc displacement and its application to modeling nucleotomy.

L. Claes, H. Wilke, H. Schmidt, 2008, Clinical biomechanics.

The relation between intervertebral disc bulging and annular fiber associated strains for simple and complex loading.

Hendrik Schmidt, Frank Heuer, Hans-Joachim Wilke, 2008, Journal of biomechanics.

3rd International workshop on spinal loading and deformation.

Idsart Kingma, Aboulfazl Shirazi-Adl, Hendrik Schmidt, 2018, Journal of biomechanics.

Effect of disc degeneration on the mechanical behavior of the human lumbar spine: a probabilistic finite element study.

Hendrik Schmidt, Maxim Bashkuev, Sandra Reitmaier, 2018, The spine journal : official journal of the North American Spine Society.

The effect of degenerative morphological changes of the intervertebral disc on the lumbar spine biomechanics: a poroelastic finite element investigation

Fabio Galbusera, Hendrik Schmidt, Hans-Joachim Wilke, 2011, Computer methods in biomechanics and biomedical engineering.

In vitro and in silico investigations of disc nucleus replacement

H. Wilke, A. Shirazi-Adl, Sandra Reitmaier, 2012, Journal of The Royal Society Interface.

Application of a calibration method provides more realistic results for a finite element model of a lumbar spinal segment.

Lutz Claes, Frank Heuer, Hans-Joachim Wilke, 2007, Clinical biomechanics.

Fluid-flow dependent response of intervertebral discs under cyclic loading: On the role of specimen preparation and preconditioning.

A. Shirazi-Adl, M. Dreischarf, H. Schmidt, 2016, Journal of biomechanics.

Prediction equations for human thoracic and lumbar vertebral morphometry

Hendrik Schmidt, Hans-Joachim Wilke, H. Wilke, 2010, Journal of anatomy.

Spinal Loads during Cycling on an Ergometer

G. Bergmann, F. Graichen, A. Rohlmann, 2014, PloS one.

Which axial and bending stiffnesses of posterior implants are required to design a flexible lumbar stabilization system?

Hendrik Schmidt, Frank Heuer, Hans-Joachim Wilke, 2009, Journal of biomechanics.

Sensitivity analysis of the position of the intervertebral centres of reaction in upright standing--a musculoskeletal model investigation of the lumbar spine.

M. Dreischarf, H. Schmidt, T. Zander, 2016, Medical engineering & physics.

Application of a new calibration method for a three-dimensional finite element model of a human lumbar annulus fibrosus.

Lutz Claes, Antonius Rohlmann, Ulrich Simon, 2006, Clinical biomechanics.

Biomechanical Evaluation of a New Total Posterior-Element Replacement System

H. Wilke, H. Schmidt, K. Werner, 2006, Spine.

Posterior motion preserving implants evaluated by means of intervertebral disc bulging and annular fiber strains.

H. Wilke, H. Schmidt, F. Heuer, 2012, Clinical biomechanics.

Stepwise reduction of functional spinal structures increase vertebral translation and intradiscal pressure.

Lutz Claes, Hendrik Schmidt, Frank Heuer, 2007, Journal of biomechanics.

Effect of age and sex on lumbar lordosis and the range of motion. A systematic review and meta-analysis.

R. Arshad, Sandra Reitmaier, H. Schmidt, 2019, Journal of biomechanics.

Spinal fusion without instrumentation – Experimental animal study

H. Wilke, Sandra Reitmaier, David Volkheimer, 2017, Clinical biomechanics.

Activities of Everyday Life with High Spinal Loads

Antonius Rohlmann, Georg Bergmann, Hendrik Schmidt, 2014, PloS one.

The effects of age and gender on the lumbopelvic rhythm in the sagittal plane in 309 subjects.

M. Dreischarf, H. Schmidt, Maxim Bashkuev, 2015, Journal of biomechanics.

The effect of different design concepts in lumbar total disc arthroplasty on the range of motion, facet joint forces and instantaneous center of rotation of a L4-5 segment

Hendrik Schmidt, Hans-Joachim Wilke, H. Wilke, 2009, European Spine Journal.

Parameters influencing the outcome after total disc replacement at the lumbosacral junction. Part 1: misalignment of the vertebrae adjacent to a total disc replacement affects the facet joint and facet capsule forces in a probabilistic finite element analysis

A. Rohlmann, M. Dreischarf, H. Schmidt, 2013, European Spine Journal.

Differences in 3D vs. 2D analysis in lumbar spinal fusion simulations.

H. Schmidt, Maxim Bashkuev, M. Pumberger, 2018, Journal of biomechanics.

Structural Behavior of Human Lumbar Intervertebral Disc under Direct Shear

Uwe Wolfram, Hendrik Schmidt, Hans-Joachim Wilke, 2015, Journal of applied biomaterials & functional materials.

Finite element modeling of soft tissues: material models, tissue interaction and challenges.

Lutz Dürselen, Anita Ignatius, Fabio Galbusera, 2014, Clinical biomechanics.

Spinal and Pelvic Kinematics During Prolonged Rowing on an Ergometer vs. Indoor Tank Rowing.

G. Brüggemann, P. Platen, H. Schmidt, 2019, Journal of strength and conditioning research.

Review article on spine kinematics of quadrupeds and bipeds during walking.

Sandra Reitmaier, H. Schmidt, 2020, Journal of biomechanics.

Parameters influencing the outcome after total disc replacement at the lumbosacral junction. Part 2: distraction and posterior translation lead to clinical failure after a mean follow-up of 5 years

A. Rohlmann, M. Dreischarf, H. Schmidt, 2013, European Spine Journal.

Is the sheep a suitable model to study the mechanical alterations of disc degeneration in humans? A probabilistic finite element model study.

Sandra Reitmaier, H. Schmidt, Maxim Bashkuev, 2019, Journal of biomechanics.

Automatic distinction of upper body motions in the main anatomical planes.

William R Taylor, Antonius Rohlmann, Georg N Duda, 2014, Medical engineering & physics.

Impact of material and morphological parameters on the mechanical response of the lumbar spine - A finite element sensitivity study.

Marcel Dreischarf, Hendrik Schmidt, M. Dreischarf, 2017, Journal of biomechanics.

The effect of age and sex on the cervical range of motion - A systematic review and meta-analysis.

R. Arshad, Sandra Reitmaier, H. Schmidt, 2018, Journal of biomechanics.

No consensus on causality of spine postures or physical exposure and low back pain: A systematic review of systematic reviews.

D. Belavy, Patrick J Owen, H. Schmidt, 2020, Journal of biomechanics.

Application of a novel spinal posture and motion measurement system in active and static sitting

Marcel Dreischarf, Hendrik Schmidt, Maxim Bashkuev, 2015, Ergonomics.

Review of the fluid flow within intervertebral discs - How could in vitro measurements replicate in vivo?

F. Graichen, A. Shirazi-Adl, Sandra Reitmaier, 2016, Journal of biomechanics.

Creep associated changes in intervertebral disc bulging obtained with a laser scanning device.

Lutz Claes, Hendrik Schmidt, Frank Heuer, 2007, Clinical biomechanics.

The shape and mobility of the thoracic spine in asymptomatic adults - A systematic review of in vivo studies.

Sandra Reitmaier, H. Schmidt, T. Zander, 2018, Journal of biomechanics.

A method to obtain surface strains of soft tissues using a laser scanning device.

Uwe Wolfram, Hendrik Schmidt, Frank Heuer, 2008, Journal of biomechanics.

Stepwise reduction of functional spinal structures increase disc bulge and surface strains.

H. Wilke, H. Schmidt, F. Heuer, 2008, Journal of biomechanics.

Dependency of disc degeneration on shear and tensile strains between annular fiber layers for complex loads.

Hendrik Schmidt, Frank Heuer, Hans-Joachim Wilke, 2009, Medical engineering & physics.

Does Total Hip Arthroplasty Affect Spinopelvic and Spinal Alignment?

C. Perka, H. Schmidt, M. Pumberger, 2022, Clinical spine surgery.

The sagittal sways of back lordosis and sacral orientation during still standing at different arm positions.

R. Zhu, H. Schmidt, T. Zander, 2020, Journal of biomechanics.

Investigation of different cage designs and mechano-regulation algorithms in the lumbar interbody fusion process - a finite element analysis.

Antonius Rohlmann, Sara Checa, Hendrik Schmidt, 2014, Journal of biomechanics.

Comparative evaluation of six quantitative lifting tools to estimate spine loads during static activities.

André Plamondon, Aboulfazl Shirazi-Adl, Navid Arjmand, 2015, Applied ergonomics.

Separate the Sheep from the Goats: Use and Limitations of Large Animal Models in Intervertebral Disc Research.

F. Graichen, A. Shirazi-Adl, Sandra Reitmaier, 2017, The Journal of bone and joint surgery. American volume.

Preoperative Segmental Disc Geometry as a Possible Predictor fo r theClinical Outcome of Lumbosacral Total Disc Replacement

M. Dreischarf, H. Schmidt, P. Strube, 2016 .

Computational analyses of different intervertebral cages for lumbar spinal fusion.

G. Duda, H. Schmidt, Maxim Bashkuev, 2015, Journal of biomechanics.

In vivo loads on a vertebral body replacement during different lifting techniques.

Antonius Rohlmann, Marcel Dreischarf, Georg Bergmann, 2016, Journal of biomechanics.

Temporal and spatial variations of pressure within intervertebral disc nuclei.

A. Shirazi-Adl, H. Schmidt, 2018, Journal of the mechanical behavior of biomedical materials.

Intradiscal pressure measurements: A challenge or a routine?

I. Kingma, A. J. van der Veen, Pieter-Paul A. Vergroesen, 2016, Journal of biomechanics.

Computational study of the role of fluid content and flow on the lumbar disc response in cyclic compression: Replication of in vitro and in vivo conditions.

A. Shirazi-Adl, H. Schmidt, Maxim Bashkuev, 2017, Journal of biomechanics.

Prediction equations for human thoracic and lumbar vertebral morphometry

H. Wilke, H. Schmidt, M. Kunkel, 2010, Journal of anatomy.

Are there characteristic motion patterns in the lumbar spine during flexion?

H. Schmidt, Maxim Bashkuev, T. Zander, 2017, Journal of biomechanics.

Sex-Dependent Estimation of Spinal Loads During Static Manual Material Handling Activities—Combined in vivo and in silico Analyses

N. Arjmand, H. Schmidt, T. Zander, 2021, Frontiers in Bioengineering and Biotechnology.

Estimation of loads on human lumbar spine: A review of in vivo and computational model studies.

A. Rohlmann, A. Shirazi-Adl, N. Arjmand, 2016, Journal of biomechanics.

Impact of material and morphological parameters on the mechanical response of the lumbar spine - A finite element sensitivity study.

M. Dreischarf, H. Schmidt, T. Zander, 2017, Journal of biomechanics.

Intradiscal pressure, shear strain and fiber strain in the intervertebral disc under combined loading

Lutz Claes, Ulrich Simon, Hendrik Schmidt, 2006 .

Comparison of in vivo measured loads in knee, hip and spinal implants during level walking.

G. Bergmann, A. Rohlmann, I. Kutzner, 2017, Journal of biomechanics.

Which is the best-suited landmark to assess the thoracic orientation?

Thomas Zander, Hendrik Schmidt, Fumin Pan, 2019, Journal of biomechanics.