C. Mgbemene

发表

Maximizing The Output Power Harvest Of A Pv Panel: A Critical Review

E. Ogundimu, E. Akinlabi, C. Mgbemene, 2019, Journal of Physics: Conference Series.

Feasibility Study on the Production of Particleboard from Maize Cobs, Rice Husks, and Groundnut Shells Using Acacia Mimosa Tannin Extract as the Bonding Adhesive

A. Rosenkranz, C. Mgbemene, F. Pichelin, 2014 .

Investigation of Parametric Performance of the Hybrid 3D CPC/TEM System Due to Thermoelectric Irreversibilities

Cornelius Ogbodo Anayo Agbo, C. Mgbemene, H. Njoku, 2018, Front. Energy Res..

Total cost of risk for privatized electric power generation under pipeline vandalism

C. Mgbemene, S. Nwanya, O. Iloeje, 2018, Heliyon.

Numerical Study of a Phase Change Material Integrated Solar Thermoelectric Generator

C. Mgbemene, Chika C. Maduabuchi, 2020, Journal of Electronic Materials.

Feasibility study on the use of carbonized cassava cortex as reinforcement in polymer-matrix composites

C. Mgbemene, M. Eke, A. D. Omah, 2018 .

Overview of recent developments and the future of organic Rankine cycle applications for exhaust energy recovery in highway truck engines

A. Pesyridis, C. Mgbemene, G. Unachukwu, 2020 .

Parametric Optimization of Exergy Efficiency in Solar Thermoelectric Generators

O. V. Ekechukwu, C. Mgbemene, H. Njoku, 2020, Journal of Electronic Materials.

High Performance Solar Thermoelectric Generator Using Asymmetrical Variable Leg Geometries

Agwu A. Ndukwe, C. Mgbemene, Chika C. Maduabuchi, 2021 .

Experimental investigation on the performance of aluminium soda can solar air heater

C. Mgbemene, Ifeanyi Jacobs, N. Ononiwu, 2022, Renewable Energy.

Experimental Investigation on the Performance of Aluminium Soda Can Solar Air Heater

C. Mgbemene, Ifeanyi Jacobs, N. Ononiwu, 2022, SSRN Electronic Journal.

Solar power generation using a two‐stage X‐leg thermoelectric generator with high‐temperature materials

C. Mgbemene, M. Eke, Chika C. Maduabuchi, 2021, International Journal of Energy Research.

Influence of additives on kaolinite clay properties- applications, trends, and a case study

Omolayo M. Ikumapayi, E. Akinlabi, C. Mgbemene, 2019, Procedia Manufacturing.

Overall performance optimisation of tapered leg geometry based solar thermoelectric generators under isoflux conditions

C. Mgbemene, C. Maduabuchi, Ravita Lamba, 2021, Journal of Power Sources.

Effects of leg geometry and multistaging of thermoelectric modules on the performance of a photovoltaic‐thermoelectric system using different photovoltaic cells

C. Mgbemene, C. Maduabuchi, Ravita Lamba, 2021, International Journal of Energy Research.

Thermally Induced Delamination of PV-TEG: Implication of Leg’s Joule and Thomson Heating

C. Mgbemene, O. I. Ibeagwu, Chika C. Maduabuchi, 2020, Journal of Electronic Materials.

Industrialization and its Backlash: Focus on Climate Change and its Consequences

C. A. Mgbemene, C. Mgbemene, C. Nnaji, 2016 .

Constant heat outflow rates for air/surge vessel modelling during pressure transients

J. I. Ume, H. Yeung, C. Mgbemene, 2019, International Journal of Pressure Vessels and Piping.

Electrochemical and mechanical study of co-deposited Zn–ZnO-snail shell particles composites coating on mild steel

C. Mgbemene, V. Aigbodion, C. Enyi, 2018 .

Poor Blade Curvature - A Contributor in the Loss of Performance in the Compressor Unit of Gas Turbine Systems

C. A. Mgbemene, C. Mgbemene, 2012 .

Biomass and bioenergy potential of cassava waste in Nigeria: Estimations based partly on rural-level garri processing case studies

C. G. Ozoegwu, C. A. Mgbemene, C. Eze, 2017 .

Mathematical and simulation-based analysis of the thermal and electrical performance of a flat plate solar air heater coupled with thermoelectric generators (TEGs)

C. Mgbemene, H. Njoku, A. Kalu-Uka, 2022, Nigerian Journal of Technology.

Performance optimization and thermodynamic analysis of irreversibility in a contemporary solar thermoelectric generator

C. Mgbemene, Chika C. Maduabuchi, K. Ejenakevwe, 2021 .

Electricity Generation From a Compound Parabolic Concentrator Coupled to a Thermoelectric Module

Hongwei Sun, John Duffy, C. A. Mgbemene, 2010 .

High-temperature thermal treatment of co-deposition of Zn-10ZnO-25Ant hill particulate composite coating on mild steel

C. Mgbemene, V. Aigbodion, S. Neife, 2018 .

High-temperature thermal treatment of co-deposition of Zn-10ZnO-25Ant hill particulate composite coating on mild steel

C. Mgbemene, V. Aigbodion, S. Neife, 2018, The International Journal of Advanced Manufacturing Technology.

Designing and fabrication of an installation PV solar modules tilting platform

E. Ogundimu, E. Akinlabi, C. Mgbemene, 2022, Sustainable Engineering and Innovation.

The study of the properties of carbonized cassava cortex/epoxy composite for electrical insulation

C. Mgbemene, V. Aigbodion, A. D. Omah, 2019, The International Journal of Advanced Manufacturing Technology.

Design, size estimation, and thermodynamic analysis of a realizable organic Rankine cycle system for waste heat recovery in commercial truck engines

A. Pesyridis, M. Usman, C. Mgbemene, 2021 .

Process variability analysis in make-to-order production systems

C. A. Mgbemene, Stephen C. Nwanya, Oluseyi O. Ajayi, 2016 .

The status of solar energy integration and policy in Nigeria

C. G. Ozoegwu, C. A. Mgbemene, P. A. Ozor, 2017 .