J. Seok

发表

Nonlinear dynamic and energetic characteristics of piezoelectric energy harvester with two rotatable external magnets

Jeehyun Jung, Pilkee Kim, Jongwon Seok, 2015 .

Dispersion relations for cylindrical bending motions of polarized piezoceramic bimorph plates with two facing edges free

J. Seok, 2005 .

Resonant behaviors of a nonlinear cantilever beam with tip mass subject to an axial force and electrostatic excitation

Pilkee Kim, Jongwon Seok, Pilkee Kim, 2012 .

Behavioral model for magnetorheological fluid under a magnetic field using Lekner summation method

J. Seok, B. Min, K. Jang, 2009 .

A behavior model of a magnetorheological fluid in direct shear mode

J. Seok, B. Min, K. Jang, 2011 .

Bifurcation analysis on the hunting behavior of a dual-bogie railway vehicle using the method of multiple scales

Pilkee Kim, J. Seok, 2010 .

Dynamic and energetic characteristics of a tri-stable magnetopiezoelastic energy harvester

Pilkee Kim, J. Seok, 2015 .

Energy consumption reduction technology in manufacturing — A selective review of policies, standards, and research

C. Park, J. Seok, Kye-Si Kwon, 2009 .

Analysis of a viscoplastic flow with field-dependent yield stress and wall slip boundary conditions for a magnetorheological (MR) fluid

Jeong-In Lee, Pilkee Kim, J. Seok, 2014 .

Multiscale material removal modeling of chemical mechanical polishing

T. Cale, C. Sukam, J. Tichy, 2003 .

An electrochemomechanical polishing process using magnetorheological fluid

Sang Jo Lee, Byung-Kwon Min, Jongwon Seok, 2010 .

A Study on Wafer-Level 3D Integration Including Wafer Bonding using Low-k Polymeric Adhesive

T. Cale, R. Gutmann, Jian-Qiang Lu, 2007 .

Frequency-tunable electromagnetic energy harvester using magneto-rheological elastomer

Jeehyun Jung, Jongwon Seok, Jeehyun Jung, 2016 .

Magnetorheological finishing process for hard materials using sintered iron-CNT compound abrasives

Sang Jo Lee, Byung-Kwon Min, Jongwon Seok, 2009 .

A novel self-tuning wind energy harvester with a slidable bluff body using vortex-induced vibration

J. Seok, Wan Sun, 2020 .

Free vibrations of annular sector cantilever plates.

H. F. Tiersten, Jongwon Seok, H. Tiersten, 2004 .

Dynamic analysis of a hollow cylinder subject to a dual traveling force imposed on its inner surface

J. Seok, Sooyoung Lee, 2015 .

High-Dimensional Harmonic Balance Analysis for a Turning Process with State-Dependent Delay

Pilkee Kim, J. Seok, Wan Sun, 2013 .

Critical Adhesion Energy of Benzocyclobutene-Bonded Wafers

Jian-Qiang Lu, Ronald J. Gutmann, Timothy S. Cale, 2006 .

Critical Adhesion Energy at the Interface Between Benzocyclobutene and Silicon Nitride Layers

Jian-Qiang Lu, Ronald J. Gutmann, Timothy S. Cale, 2007 .

Bond Strength of Wafer Stack Including Inorganic and Organic Thin Films

Yongchai Kwon, J. Seok, 2008 .

Novel galloping-based piezoelectric energy harvester adaptable to external wind velocity

J. Seok, Wan Sun, 2021 .

Development of a novel vibro-wind galloping energy harvester with high power density incorporated with a nested bluff-body structure

J. Seok, Feng Guo, Wan Sun, 2019, Energy Conversion and Management.

A Study on the Bond Strength of BCB-bonded Wafers

석종원, T. Cale, R. Gutmann, 2007 .

A behavioral model of axisymmetrically configured magnetorheological fluid using Lekner summation

Sang Jo Lee, Byung-Kwon Min, Jongwon Seok, 2009 .

An integrated material removal model for silicon dioxide layers in chemical mechanical polishing processes

Jongwon Seok, J. Seok, Seunghee Oh, 2009 .

Modeling of chemical-mechanical polishing considering thermal coupling effects

Jongwon Seok, J. Seok, Seunghee Oh, 2008 .

Development of the optimal bluff body for wind energy harvesting using the synergetic effect of coupled vortex induced vibration and galloping phenomena

Jongwon Seok, J. Seok, Wan Sun, 2019, International Journal of Mechanical Sciences.

Magnetically coupled piezoelectric galloping-based energy harvester using a tandem configuration

J. Seok, Wan Sun, Hyeonho Jang, 2021 .

Viscoplastic flow in slightly varying channels with wall slip pertaining to a magnetorheological (MR

Pilkee Kim, Jongwon Seok, Pilkee Kim, 2011 .

An analysis of a vibratory angular-rate gyroscope using polarized piezoceramic bimorph plates. Part 1: derivation of variational equations in the absence of angular velocity

H. F. Tiersten, Jongwon Seok, Henry A. Scarton, 2005 .

An analysis of a vibratory angular-rate gyroscope using polarized piezoceramic bimorph plates. Part 2: solution procedure for the gyroscope with superposed angular velocity

H. F. Tiersten, Jongwon Seok, Henry A. Scarton, 2005 .

Mixed-mode fatigue crack growth analysis using peridynamic approach

Jeehyun Jung, Jongwon Seok, Jeehyun Jung, 2017 .

Free vibrations of rectangular cantilever plates. Part 1: out-of-plane motion

H. Tiersten, H. Scarton, J. Seok, 2004 .

Free vibrations of annular sector cantilever plates. Part 1: out-of-plane motion

H. F. Tiersten, Jongwon Seok, H. Tiersten, 2004 .

Piezoelectricity of a Microcellular Polypropylene Electret under an External Inertial Load

Pilkee Kim, J. Seok, Young-Sik Kim, 2009 .

Dynamic characteristics of a beam angular-rate sensor

Jongwon Seok, Henry A. Scarton, H. Scarton, 2006 .

Material removal model for chemical–mechanical polishing considering wafer flexibility and edge effects

John A. Tichy, Timothy S. Cale, Jongwon Seok, 2004 .

Modeling and parameter optimization for cutting energy reduction in MQL milling process

Jeehyun Jung, Jongwon Seok, Duk-yong Jang, 2016 .

Two-Dimensional Analysis of an Elastic Layer Coupled to a Viscous Fluid

T. Cale, J. Tichy, J. Seok, 2004 .

Nonlinear dynamic analyses on a magnetopiezoelastic energy harvester with reversible hysteresis

Yong-Jin Yoon, Pilkee Kim, Jongwon Seok, 2016 .

A Multiscale Elastohydrodynamic Contact Model for CMP

John A. Tichy, Timothy S. Cale, Jongwon Seok, 2003 .

Soft Elastohydrodynamic Lubrication With Roughness

John A. Tichy, Timothy S. Cale, Jongwon Seok, 2003 .

Fatigue crack growth analysis in layered heterogeneous material systems using peridynamic approach

Jeehyun Jung, Jongwon Seok, Jeehyun Jung, 2016 .

A multi-stable energy harvester: Dynamic modeling and bifurcation analysis

Pilkee Kim, Jongwon Seok, Pilkee Kim, 2014 .

Adaptive wind energy harvester with transformable bluff body

J. Seok, Wan Sun, Hyeonho Jang, 2021, Energy Conversion and Management.

Dynamic Modelling and Simulation of a Cryogenic Carbon Dioxide Cleaning Process

J. Seok, P. Kim, 2010 .

Free flexural vibrations of a piezoelectric bimorph plate with periodic edge conditions

Jeehyun Jung, Pilkee Kim, J. Seok, 2012 .

Characterization and parameter optimization of a microcellular polypropylene electret under an external inertial load

Ju-hong Lee, Pilkee Kim, J. Seok, 2009 .

Triple-well potential with a uniform depth: Advantageous aspects in designing a multi-stable energy harvester

Pilkee Kim, Jongwon Seok, Dowung Son, 2016 .

A parametric dynamic study on hunting stability of full dual-bogie railway vehicle

Jeehyun Jung, Pilkee Kim, Jongwon Seok, 2011 .

Deburring microparts using a magnetorheological fluid

Sangjin Maeng, Doo Yeon Kim, Byung-Kwon Min, 2012 .

Fabrication of a functionally graded and magnetically responsive shape memory polymer using a 3D printing technique and its characterization

Rizwan Ul Hassan, J. Seok, Soohwan Jo, 2018 .

Thermorheological characteristics and comparison of shape memory polymers fabricated by novel 3D printing technique

Rizwan Ul Hassan, J. Seok, Soohwan Jo, 2018 .

Bifurcation analysis on a turning system with large and state-dependent time delay

Pilkee Kim, Jongwon Seok, Pilkee Kim, 2012 .

Inverse analysis of material removal data using a multiscale CMP model

Ronald J. Gutmann, John A. Tichy, Timothy S. Cale, 2003 .

Bifurcation analyses on the chatter vibrations of a turning process with state-dependent delay

Pilkee Kim, Jongwon Seok, Pilkee Kim, 2012 .

Dynamic modeling and simulation of a nonlinear, non-autonomous grinding system considering spatially periodic waviness on workpiece surface

Jeehyun Jung, Pilkee Kim, Hyeonjun Kim, 2015, Simul. Model. Pract. Theory.

An accurate regenerative chatter model in the ball-end milling process that considers high feed rate and shallow axial immersion conditions

Jeehyun Jung, Chuong Nguyen, Chinh Ngo, 2017 .

Mechanism of synergetic material removal by electrochemomechanical magnetorheological polishing

J. Seok, C. Lee, B. Min, 2013 .

Separating contribution from two coherent and interfering inputs

Jongwon Seok, V. V. Lenchine, J. Seok, 2005 .

A method to fabricate Low-Cost and large area vitreous carbon mold for glass molded microstructures

Jongwon Seok, Jonghyun Ju, Seok-min Kim, 2015 .

Development of low-cost and large-area nanopatterned vitreous carbon stamp for glass nanoreplication

Jongwon Seok, Jonghyun Ju, Seok-min Kim, 2012, 2012 12th IEEE International Conference on Nanotechnology (IEEE-NANO).

Nonlinear Modeling and Dynamic Simulation Using Bifurcation and Stability Analyses of Regenerative Chatter of Ball-End Milling Process

Jeehyun Jung, Jongwon Seok, Chinh Ngo, 2016 .