H. Deng

发表

Numerical simulation of conjugate heat and mass transfer process within cylindrical porous media with cylindrical dielectric cores in microwave freeze-drying

Zhi Tao, Hongwei Wu, Hongwu Deng, 2005 .

Heat transfer characteristics in a rotating wedge-shaped ribbed trailing edge with impingement jet

H. Deng, Jianqin Zhu, Jiasen Wang, 2021 .

Heat transfer study in rotating smooth square U-duct at high rotation numbers

Z. Tao, H. Deng, Lu Qiu, 2013 .

Experimental study of flow distribution for aviation kerosene in parallel helical tubes under supercritical pressure

Z. Tao, H. Deng, Guoqiang Xu, 2015 .

Heat transfer study in a rotating ribbed two-pass channel with engine-similar cross section at high rotation number

Z. Tao, H. Deng, Shuqing Tian, 2016 .

Heat transfer performance in a rotating two-inlet cooling wedge-shaped channel with lateral inflow holes

Z. Tao, H. Deng, Guoqiang Xu, 2017 .

Pressure drop and heat transfer performance in a rotating two-pass channel with staggered 45-deg ribs

Z. Tao, H. Deng, Guoqiang Xu, 2017 .

Heat transfer investigation in rotating smooth square U-duct with different wall-temperature ratios and channel orientations

H. Deng, Guoqiang Xu, Shuqing Tian, 2015 .

HEAT TRANSFER CHARACTERISTICS OF RP-3 KEROSENE AT SUPERCRITICAL PRESSURE IN A VERTICAL CIRCULAR TUBE

Z. Tao, H. Deng, Jining Sun, 2012 .

Flow and heat transfer in a rotating channel with impingement cooling and film extraction

H. Deng, Jiasen Wang, Zishuo Wang, 2021 .

Heat transfer in a rotating rectangular channel with impingement jet and film holes

Z. Tao, H. Deng, Jianqin Zhu, 2021 .

Determination of local bulk temperature based heat transfer coefficient in the channel with multiple inlets and multiple outlets

Z. Tao, H. Deng, Yanchen Fu, 2019, International Journal of Thermal Sciences.

Heat transfer investigation in a rotating U-turn smooth channel with irregular cross-section

Z. Tao, H. Deng, Jianqin Zhu, 2016 .

Heat transfer in a trailing cooling channel using ejection slot with different chordwise length ratio of impingement cavity

Z. Tao, H. Deng, Jianqin Zhu, 2021, Experimental Heat Transfer.

Thermal and Element Analyses for Supercritical RP-3 Surface Coke Deposition under Stable and Vibration Conditions

Z. Tao, H. Deng, Guoqiang Xu, 2015 .

Experimental study of rotation effect on film cooling over the flat wall with a single hole

Hongwei Wu, Z. Tao, S. Ding, 2008 .

Effect of Blockage Ratio on Heat Transfer and Pressure Drop in Rotating Ribbed Channels at High Rotation Numbers

Z. Tao, H. Deng, Jianqin Zhu, 2020, Journal of Thermal Science.

Experimental research in rotating wedge-shaped cooling channel with multiple non-equant holes lateral inlet

Z. Tao, H. Deng, Shuqing Tian, 2018 .

Heat transfer in a two-inlet rotating rectangular channel with side-wall fluid extraction

Z. Tao, H. Deng, Yanan Chen, 2017 .

Heat transfer in an impingement cooling channel under isothermal boundaries at high rotation numbers

H. Deng, Hua Li, Jingcong Xu, 2022, International Journal of Heat and Mass Transfer.

Heat transfer characteristics in a rotating trailing edge internal cooling channel with two coolant inlets

Z. Tao, H. Deng, Guoqiang Xu, 2017 .

The application of similarity theory for heat transfer investigation in rotational internal cooling channel

H. Deng, Guoqiang Xu, Xiao Yu, 2015 .

Visualization Experiments of a Specific Fuel Flow Through Quartz-glass Tubes Under both Sub- and Supercritical Conditions

Z. Tao, H. Deng, Guoqiang Xu, 2012 .

Density Measurements of Endothermic Hydrocarbon Fuel at Sub- and Supercritical Conditions

Z. Tao, H. Deng, Guozhu Liu, 2011 .

Experimental Study on Influences of Physical Factors to Supercritical RP-3 Surface and Liquid-Space Thermal Oxidation Coking

Z. Tao, H. Deng, Guoqiang Xu, 2014 .

Isobaric Specific Heat Capacity Measurement for Kerosene RP-3 in the Near-Critical and Supercritical Regions

Z. Tao, H. Deng, Guozhu Liu, 2012 .

Numerical investigation of heat transfer characteristics and flow resistance of kerosene RP-3 under supercritical pressure

Z. Tao, H. Deng, Jianqin Zhu, 2015 .

Viscosity Measurements of Endothermic Hydrocarbon Fuel from (298 to 788) K under Supercritical Pressure Conditions

Z. Tao, H. Deng, Guoqiang Xu, 2012 .

Thermal-Conductivity Measurements of Aviation Kerosene RP-3 from (285 to 513) K at Sub- and Supercritical Pressures

H. Deng, J. Wen, Z. Jia, 2015 .

Shape Memory Alloys Enabled Smart Heat Exchangers

Y. Huang, H. Deng, Haiwang Li, 2023, Applied Thermal Engineering.

Experimental investigation on heat transfer of a specific fuel (RP-3) flows through downward tubes at supercritical pressure

Z. Tao, H. Deng, Guoqiang Xu, 2012 .

Effect of channel orientation on heat transfer in a rotating impingement cooling channel

H. Deng, Lu Qiu, Hua Li, 2022, International Journal of Heat and Mass Transfer.

Effects of coolant mass flow rate ratio on heat transfer in a two-inlet rotating wedge-shaped channel

H. Deng, Guoqiang Xu, Xiao Yu, 2016 .

Heat transfer in a rotating smooth wedge-shaped channel with lateral fluid extraction

Z. Tao, H. Deng, Lu Qiu, 2015 .

Pressure drop and heat transfer in rotating smooth square U-duct under high rotation numbers

Z. Tao, H. Deng, Jining Sun, 2013 .

Flow frictional resistance characteristics of kerosene RP-3 in horizontal circular tube at supercritical pressure

Zhi Tao, Guoqiang Xu, Hongwu Deng, 2013 .

Effect of Channel Orientation in a Rotating Wedge-Shaped Cooling Channel With Pin Fins and Ribs

Z. Tao, H. Deng, Lu Qiu, 2012 .

Design and Test of Smart Heat Exchanger Based on Shape Memory Alloys

L. Li, H. Deng, Bowen Wang, 2022, SSRN Electronic Journal.

Flow and Heat Transfer in a Rotating and Non-Rotating Wedge-Shaped Cooling Passage with Ribs and Pin Fins

K. Bryden, S. Ding, H. Deng, 2015 .

Effect of Channel Orientation on Heat Transfer in Rotating Smooth Square U-Duct at High Rotation Number

H. Deng, Guoqiang Xu, Lu Qiu, 2014 .

EFFECT OF CHANNEL ORIENTATION IN A ROTATING SMOOTH WEDGE-SHAPED COOLING CHANNEL WITH LATERAL EJECTION

Z. Tao, H. Deng, Lu Qiu, 2013 .

Heat transfer in a rotating two-inlet wedge-shaped channel with pin-fins

H. Deng, Jianqin Zhu, L. Bai, 2020 .

Effect of rib spacing on heat transfer and friction in a rotating two-pass square channel with asymmetrical 90-deg rib turbulators

H. Deng, Guoqiang Xu, Yang Li, 2015 .

Systematic Numerical Investigations on Heat Transfer Performance of Latticework Channel

H. Deng, Haiwang Li, Yi Huang, 2022, Social Science Research Network.

Experimental study on heat transfer and flow resistance in improved latticework cooling channels

H. Deng, Jianqin Zhu, Kai Wang, 2013 .

Heat transfer of a rotating two-inlet trailing edge channel with lateral fluid extractions

Z. Tao, H. Deng, Jianqin Zhu, 2018 .

Heat transfer in a two-inlet rotating wedge-shaped channel with various locations of the second inlet

H. Deng, Lu Qiu, Yang Li, 2017 .

Numerical investigation into thermo-hydraulic characteristics and mixing performance of triply periodic minimal surface-structured heat exchangers

H. Deng, Kaixin Yan, Junwei Wang, 2023, Applied Thermal Engineering.

Experiments on impingement heat transfer with film extraction flow on the leading edge of rotating blades

Z. Tao, H. Deng, Jianqin Zhu, 2012 .

Experimental and numerical investigation of thermo-hydraulic behavior in a rotating wedge-shaped trailing edge channel with internal jet impingement

H. Deng, Kaixin Yan, Hua Li, 2023, Applied Thermal Engineering.

Conjugate heat and mass transfer process within porous media with dielectric cores in microwave freeze drying

Hongwei Wu, Z. Tao, S. Ding, 2004 .

Rotational effects on heat transfer in a two-inlet rectangular channel roughened with pin-fins

Z. Tao, H. Deng, L. Bai, 2019, International Journal of Heat and Mass Transfer.

Experimental investigation on film cooling performance of pressure side in annular cascades

Hongwu Deng, H. Deng, Guoqing Li, 2011 .