Nagayoshi Kasashima

发表

Driving technique of electromagnets to rotate spherical motors based on torque map

Akio Gofuku, Yu Yamamoto, Tomoaki Yano, 2016, 2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM).

A Trial Type of Hybrid Micro Machine Tool

Nagayoshi Kasashima, Tsuneo Kurita, Misuro Hattori, 2002 .

Torque Control Method of an Electromagnetic Spherical Motor Using Torque Map

Akio Gofuku, Tomoaki Yano, Nagayoshi Kasashima, 2016, IEEE/ASME Transactions on Mechatronics.

Cyber-physical system architecture for machining production line

Nagayoshi Kasashima, Hiroyuki Sawada, Oleg Ryabov, 2018, 2018 IEEE Industrial Cyber-Physical Systems (ICPS).

Online Failure Detection in Face Milling Using Discrete Wavelet Transform

Nagayoshi Kasashima, Kensaku Mori, G. Herrera Ruiz, 1995 .

Measurement and Decapsulation of IC Molding Resin Using YAG Laser for Failure Analysis

Nagayoshi Kasashima, Tsuneo Kurita, 2011, Int. J. Autom. Technol..

Detection of Tool Failure in Milling Process Using Discrete Wavelet Transform.

Kazuo Mori, Nagayoshi Kasashima, Gilberto Ruiz Herrera, 1995 .

Prediction of surface roughness in CNC turning by model-assisted response surface method

Nagayoshi Kasashima, Yoshiyuki Furukawa, Takashi Misaka, 2020 .

518 Study of a control technique of a spherical motor driven by electromagnets and its implementation into an FPGA-based control circuit

Akio Gofuku, Tomoaki Yano, Nagayoshi Kasashima, 2016 .

Predicting Surface Roughness of Dry Cut Grey Cast Iron Based on Cutting Parameters and Vibration Signals from Different Sensor Positions in CNC Turning

Nagayoshi Kasashima, Oleg Ryabov, Seisuke Kano, 2020, Int. J. Autom. Technol..

Torque Map Based Rotation Control Technique of a Spherical Motor driven by Electromagnets Applying Convex Programming Problem

Akio Gofuku, Tomoaki Yano, Nagayoshi Kasashima, 2018 .

Diagnosing Cutting Tool Conditions in Milling Using Wavelet Transform

Kazuo Mori, Nagayoshi Kasashima, Gilberto Herrera Ruiz, 1994 .

1209 A consideration of the rotor posture representation and sensing method

Tomoaki Yano, Nagayoshi Kasashima, Kiwamu Ashida, 2012 .

Development of the new IC decapsulation technology

Nagayoshi Kasashima, Shinya Sasaki, Kiwamu Ashida, 2011 .

Effects of laser surface texturing on friction behavior of silicon nitride under lubrication with water

Nagayoshi Kasashima, Shinya Sasaki, Tsuneo Kurita, 2011 .

In-Process Laser Monitoring of Milling Tool Failure

Nagayoshi Kasashima, Oleg Ryabov, Kazuo Mori, 1997 .

Laser and electrochemical complex machining of micro-stent with on-machine three-dimensional measurement

Nagayoshi Kasashima, Tsuneo Kurita, 2012 .

Prediction of Small Drill Bit Breakage Using the Discrete Wavelet Transforms and Linear Discriminant Functions.

Nagayoshi Kasashima, Yoshihiro Takeyasu, Kazuo Mori, 1999 .

On-machine three-dimensional monitoring technique using machining laser

Nagayoshi Kasashima, Tsuneo Kurita, 2009 .