Shaoqing Zhang

发表

Organic photovoltaic cells for low light applications offering new scope and orientation

Yong Cui, H. Yao, Jianhui Hou, 2020 .

Synthesis and photovoltaic properties of D-π-A copolymers based on thieno[3,2-b]thiophene bridge unit

Shaoqing Zhang, Lijun Huo, Zhao-jun Li, 2013 .

Polymer solar cells with enhanced open-circuit voltage and efficiency

Yang Yang, Gang Li, Jianhui Hou, 2009 .

Terthiophene based non-fused electron acceptors for efficient organic solar cells

Tao Zhang, Jianhui Hou, Shaoqing Zhang, 2022, Organic Electronics.

Enhanced photovoltaic effect from naphtho[2,3-c]thiophene-4,9-dione-based polymers through alkyl side chain induced backbone distortion

Jianqi Zhang, H. Yao, Tao Zhang, 2020 .

A Printable Organic Cathode Interlayer Enables over 13% Efficiency for 1-cm2 Organic Solar Cells

H. Ade, H. Yao, Jianhui Hou, 2019, Joule.

Design of wide-bandgap polymers with deeper ionization potential enables efficient ternary non-fullerene polymer solar cells with 13% efficiency

Hongzheng Chen, Jianhui Hou, Hang Yin, 2019, Journal of Materials Chemistry A.

Vacuum-assisted annealing method for high efficiency printable large-area polymer solar cell modules

Yun Zhang, Jianhui Hou, Shaoqing Zhang, 2019, Journal of Materials Chemistry C.

Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells.

Yun Zhang, H. Yao, Jianhui Hou, 2017, Journal of the American Chemical Society.

A Universal Nonhalogenated Polymer Donor for High‐Performance Organic Photovoltaic Cells

Jianqi Zhang, Yong Cui, Tao Zhang, 2021, Advanced materials.

Over 14% Efficiency in Polymer Solar Cells Enabled by a Chlorinated Polymer Donor

Jie Zhu, Jianhui Hou, Yunpeng Qin, 2018, Advanced materials.

Replacing alkoxy groups with alkylthienyl groups: a feasible approach to improve the properties of photovoltaic polymers.

Feng Xu, Yongfang Li, Jianhui Hou, 2011, Angewandte Chemie.

A Tandem Organic Photovoltaic Cell with 19.6% Efficiency Enabled by Light Distribution Control

Jianhui Hou, Y. Zu, Shaoqing Zhang, 2021, Advanced materials.

Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages

F. Gao, Jianqi Zhang, Yong Cui, 2019, Nature Communications.

Completely non-fused electron acceptor with 3D-interpenetrated crystalline structure enables efficient and stable organic solar cell

Jianqi Zhang, Jianhui Hou, Shaoqing Zhang, 2021, Nature Communications.

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Jianhui Hou, X. Hao, Shaoqing Zhang, 2021, Science China Chemistry.

A Thiadiazole‐Based Conjugated Polymer with Ultradeep HOMO Level and Strong Electroluminescence Enables 18.6% Efficiency in Organic Solar Cell

Yong Cui, Tao Zhang, Ling Hong, 2021, Advanced Energy Materials.

PTV-based p-type organic semiconductors: Candidates for low-cost photovoltaic donors with simple synthetic routes

Jianhui Hou, Shaoqing Zhang, Pengqing Bi, 2020 .

Recent Progress in Chlorinated Organic Photovoltaic Materials.

H. Yao, Jianhui Hou, Shaoqing Zhang, 2020, Accounts of chemical research.

High Efficiency Non-fullerene Organic Solar Cell Enabled by 1000-nm-thick Active layers with a Low Trap-state Density.

H. Yao, Jianhui Hou, Y. Zu, 2020, ACS applied materials & interfaces.

Over 14% Efficiency in Organic Solar Cells Enabled by Chlorinated Nonfullerene Small‐Molecule Acceptors

Jie Zhu, Jianqi Zhang, H. Yao, 2018, Advanced materials.

Reduced Nonradiative Energy Loss Caused by Aggregation of Nonfullerene Acceptor in Organic Solar Cells

H. Ade, H. Yao, Jianhui Hou, 2019, Advanced Energy Materials.

Selecting a donor polymer for realizing favorable morphology in efficient non-fullerene acceptor-based solar cells.

Jianhui Hou, Shaoqing Zhang, Zhaohui Wang, 2014, Small.

Improving the open-circuit voltage of alkylthio-substituted photovoltaic polymers via post-oxidation

Jianhui Hou, Shaoqing Zhang, L. Ye, 2016 .

Side Chain Selection for Designing Highly Efficient Photovoltaic Polymers with 2D-Conjugated Structure

H. Yao, Jianhui Hou, Shaoqing Zhang, 2014 .

Ternary Polymer Solar Cells based on Two Acceptors and One Donor for Achieving 12.2% Efficiency

Jianhui Hou, Shaoqing Zhang, Xiaoyu Liu, 2017, Advanced materials.

Manipulation of Domain Purity and Orientational Ordering in High Performance All-Polymer Solar Cells

H. Ade, H. Yao, Jianhui Hou, 2016 .

Low‐Temperature Solution‐Processed Hydrogen Molybdenum and Vanadium Bronzes for an Efficient Hole‐Transport Layer in Organic Electronics

Jianhui Hou, W. Choy, Shaoqing Zhang, 2013, Advanced materials.

The Effect of Processing Additives on Energetic Disorder in Highly Efficient Organic Photovoltaics: A Case Study on PBDTTT‐C‐T:PC71BM

David A. Hanifi, M. Andersson, O. Inganäs, 2015, Advanced materials.

Enhanced efficiency of polymer photovoltaic cells via the incorporation of a water-soluble naphthalene diimide derivative as a cathode interlayer

H. Yao, Jianhui Hou, Bowei Xu, 2015 .

A polymer design strategy toward green solvent processed efficient non-fullerene polymer solar cells

H. Ade, Jie Zhu, Jianhui Hou, 2018 .

Synergic Effects of Randomly Aligned SWCNT Mesh and Self‐Assembled Molecule Layer for High‐Performance, Low‐Bandgap, Polymer Solar Cells with Fast Charge Extraction

Jianhui Hou, W. Choy, Shaoqing Zhang, 2015 .

Optimizing polymer aggregation and blend morphology for boosting the photovoltaic performance of polymer solar cells via a random terpolymerization strategy

Jianqi Zhang, Yong Cui, J. Qin, 2020, Journal of Energy Chemistry.

Highly efficient planar perovskite solar cells achieved by simultaneous defect engineering and formation kinetic control

Jianhui Hou, W. Choy, M. Nazeeruddin, 2018 .

Highly Efficient Tandem Polymer Solar Cells with a Photovoltaic Response in the Visible Light Range

Jianhui Hou, Shaoqing Zhang, L. Ye, 2015, Advanced materials.

A ternary organic solar cell with 300 nm thick active layer shows over 14% efficiency

Jianhui Hou, Cunbin An, Bowei Xu, 2020, Science China Chemistry.

Molecular design of a non-fullerene acceptor enables a P3HT-based organic solar cell with 9.46% efficiency

Jianhui Hou, Shaoqing Zhang, L. Ye, 2020 .

Reduced non-radiative charge recombination enables organic photovoltaic cell approaching 19% efficiency

Yong Cui, Tao Zhang, Ling Hong, 2021 .

Tandem Organic Solar Cell with 20.2% Efficiency

Jianhui Hou, Shaoqing Zhang, Zhong Zheng, 2021, Joule.

High Efficiency Organic Solar Cells Achieved by the Simultaneous Plasmon-Optical and Plasmon-Electrical Effects from Plasmonic Asymmetric Modes of Gold Nanostars.

Jianhui Hou, W. Choy, Shaoqing Zhang, 2016, Small.

Manipulating Aggregation and Molecular Orientation in All‐Polymer Photovoltaic Cells

H. Ade, H. Yao, Jianhui Hou, 2015, Advanced materials.

Highly Efficient Photovoltaic Polymers Based on Benzodithiophene and Quinoxaline with Deeper HOMO Levels

Yong Cui, Jianhui Hou, Shaoqing Zhang, 2015 .

Molecular design toward efficient polymer solar cells processed by green solvents

Yong Cui, Jianhui Hou, Shaoqing Zhang, 2015 .

Molecular Design and Morphology Control Towards Efficient Polymer Solar Cells Processed using Non‐aromatic and Non‐chlorinated Solvents

Jianhui Hou, Shaoqing Zhang, Yue Wu, 2014, Advanced materials.

Subtle side-chain tuning on terminal groups of small molecule electron acceptors for efficient fullerene-free polymer solar cells

Jie Zhu, H. Yao, Jianhui Hou, 2017 .

Correlations among Chemical Structure, Backbone Conformation, and Morphology in Two Highly Efficient Photovoltaic Polymer Materials

Jianhui Hou, Hao Zhang, Shaoqing Zhang, 2016 .

Efficient Polymer Solar Cells Based on Benzothiadiazole and Alkylphenyl Substituted Benzodithiophene with a Power Conversion Efficiency over 8%

Jianhui Hou, F. Liu, Shaoqing Zhang, 2013, Advanced materials.

Synergistic Effect of Fluorination on Molecular Energy Level Modulation in Highly Efficient Photovoltaic Polymers

Jianhui Hou, Shaoqing Zhang, Xia Guo, 2014, Advanced materials.

Terthiophene Based Non-Fused Electron Acceptors for Efficient Organic Solar Cells

Tao Zhang, Jianhui Hou, Shaoqing Zhang, 2022, SSRN Electronic Journal.

Room-Temperature Solution-Processed Molybdenum Oxide as a Hole Transport Layer with Ag Nanoparticles for Highly Efficient Inverted Organic Solar Cells

Jianhui Hou, W. Choy, Shaoqing Zhang, 2013 .

A Wide Bandgap Polymer with Strong π–π Interaction for Efficient Fullerene‐Free Polymer Solar Cells

H. Yao, Jianhui Hou, Hao Zhang, 2016 .

The effect of aggregation behavior on photovoltaic performances in benzodithiophene-thiazolothiazole-based wide band-gap conjugated polymers with side chain position changes

Jianqi Zhang, Tao Zhang, Jianhui Hou, 2020 .

A Self‐Organized Poly(vinylpyrrolidone)‐Based Cathode Interlayer in Inverted Fullerene‐Free Organic Solar Cells

H. Yao, Jianhui Hou, Shaoqing Zhang, 2018, Advanced materials.

n-doped inorganic molecular clusters as a new type of hole transport material for efficient organic solar cells

Jianhui Hou, Bowei Xu, Shaoqing Zhang, 2021 .

The investigations of two conjugated polymers that show distinctly different photovoltaic properties in polymer solar cells

Jianhui Hou, Shaoqing Zhang, Hao Zhang, 2017 .

Investigation of Conjugated Polymers Based on Naphtho[2,3-c]thiophene-4,9-dione in Fullerene-Based and Fullerene-Free Polymer Solar Cells

Jianqi Zhang, H. Yao, Jianhui Hou, 2017 .

Poly[4,4-bis(2-ethylhexyl)cyclopenta[2,1-b;3,4-b′]dithiophene-2,6-diyl-alt-2,1,3- benzoselenadiazole-4,7-diyl], a New Low Band Gap Polymer in Polymer Solar Cells

Jianhui Hou, Teresa L. Chen, Shaoqing Zhang, 2009 .

Investigations of the Conjugated Polymers Based on Dithienogermole (DTG) Units for Photovoltaic Applications

Jianhui Hou, Shaoqing Zhang, Huili Fan, 2014 .

Efficient Fullerene-Free Polymer Solar Cells Based on Alkylthio Substituted Conjugated Polymers

Jianhui Hou, Bowei Xu, Shaoqing Zhang, 2017 .

Influence of Large Steric Hinderance Substituent Position on Conformation and Charge Transfer Process for Non‐Fused Ring Acceptors

Hao Li, Jianhui Hou, Shaoqing Zhang, 2022, Small methods.

Optimization of side chains in alkylthiothiophene-substituted benzo[1,2-b:4,5-b′]dithiophene-based photovoltaic polymers

H. Y. Woo, H. Yao, Jianhui Hou, 2015 .

Reduced energetic disorder enables over 14% efficiency in organic solar cells based on completely non-fused-ring donors and acceptors

Jianhui Hou, Shaoqing Zhang, Chenyi Yang, 2022, Science China Chemistry.

A High‐Performance Nonfused Wide‐Bandgap Acceptor for Versatile Photovoltaic Applications

Jianhui Hou, X. Hao, Cunbin An, 2021, Advanced materials.

Modulation of terminal alkyl chain length enables over 15% efficiency in small-molecule organic solar cells

Jianqi Zhang, Jianhui Hou, Cunbin An, 2021, Science China Chemistry.

Synthesis and Photovoltaic Properties of Two Benzo[1,2-b:3,4-b′]dithiophene-Based Conjugated Polymers

Jianhui Hou, Shaoqing Zhang, Hsiang‐Yu Chen, 2009 .

An over 16% efficiency organic solar cell enabled by a low-cost pyrazine-based polymer donor

Jianhui Hou, Shaoqing Zhang, Lijiao Ma, 2022, Journal of Materials Chemistry A.

Quenching to the Percolation Threshold in Organic Solar Cells

H. Ade, Jianhui Hou, Shaoqing Zhang, 2019, Joule.

Bandgap and Molecular Energy Level Control of Conjugated Polymer Photovoltaic Materials Based on Benzo[1,2-b:4,5-b']dithiophene

Yang Yang, Yan Yao, Jianhui Hou, 2008 .

Molecular Design of Benzodithiophene-Based Organic Photovoltaic Materials.

Long Ye, Huifeng Yao, Jianhui Hou, 2016, Chemical reviews.

Molecular design of a wide-band-gap conjugated polymer for efficient fullerene-free polymer solar cells

Bowei Xu, Han Young Woo, Chang He, 2017 .

Fullerene‐Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability

Feng Gao, Olle Inganäs, Jianhui Hou, 2016, Advanced materials.

A Highly Efficient Non‐Fullerene Organic Solar Cell with a Fill Factor over 0.80 Enabled by a Fine‐Tuned Hole‐Transporting Layer

Z. Tang, Feng Liu, Ling Hong, 2018, Advanced materials.

MoOx and V2Ox as hole and electron transport layers through functionalized intercalation in normal and inverted organic optoelectronic devices

Fengxian Xie, Jianhui Hou, Wallace C. H. Choy, 2015, Light: Science & Applications.

Toward Efficient Polymer Solar Cells Processed by a Solution‐Processed Layer‐By‐Layer Approach

H. Yao, Jianhui Hou, Shaoqing Zhang, 2018, Advanced materials.

Molecular design toward highly efficient photovoltaic polymers based on two-dimensional conjugated benzodithiophene.

Jianhui Hou, Shaoqing Zhang, Lijun Huo, 2014, Accounts of chemical research.

Design of ultra-high luminescent polymers for organic photovoltaic cells with low energy loss.

Young Woong Lee, H. Yao, Jianhui Hou, 2021, Chemical communications.

Wide-gap non-fullerene acceptor enabling high-performance organic photovoltaic cells for indoor applications

O. Inganäs, H. Yao, Jianhui Hou, 2019, Nature Energy.

Recent advances in non-fullerene organic solar cells: from lab to fab.

Jingwen Wang, Jianhui Hou, Ye Xu, 2020, Chemical communications.

A Novel Wide‐Bandgap Polymer with Deep Ionization Potential Enables Exceeding 16% Efficiency in Ternary Nonfullerene Polymer Solar Cells

Chun‐Sing Lee, Hongzheng Chen, Jianhui Hou, 2020, Advanced Functional Materials.

Environmentally Friendly Solvent‐Processed Organic Solar Cells that are Highly Efficient and Adaptable for the Blade‐Coating Method

Yun Zhang, Jianhui Hou, Shaoqing Zhang, 2018, Advanced materials.

Improved Domain Size and Purity Enables Efficient All‐Small‐Molecule Ternary Solar Cells

Yun Zhang, Jianhui Hou, Hao Zhang, 2017, Advanced materials.

Two Well‐Miscible Acceptors Work as One for Efficient Fullerene‐Free Organic Solar Cells

H. Yao, Jianhui Hou, Hao Zhang, 2017, Advanced materials.

Synthesis, characterization, and photovoltaic properties of a low band gap polymer based on silole-containing polythiophenes and 2,1,3-benzothiadiazole.

Yang Yang, Gang Li, Jianhui Hou, 2008, Journal of the American Chemical Society.

Green-solvent-processable organic solar cells

Long Ye, Jianhui Hou, Jianhui Hou, 2016 .

Fluorination vs. chlorination: a case study on high performance organic photovoltaic materials

Yun Zhang, Jianqi Zhang, H. Yao, 2018, Science China Chemistry.

Significant Influence of the Methoxyl Substitution Position on Optoelectronic Properties and Molecular Packing of Small‐Molecule Electron Acceptors for Photovoltaic Cells

H. Ade, Jianhui Hou, Shaoqing Zhang, 2017 .

Remove the Residual Additives toward Enhanced Efficiency with Higher Reproducibility in Polymer Solar Cells

Long Ye, Yan Jing, Jianhui Hou, 2013 .

Miscibility Control by Tuning Electrostatic Interactions in Bulk Heterojunction for Efficient Organic Solar Cells

Jianqi Zhang, H. Yao, Jianhui Hou, 2021, ACS Materials Letters.

Bandgap and Molecular Level Control of the Low-Bandgap Polymers Based on 3,6-Dithiophen-2-yl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione toward Highly Efficient Polymer Solar Cells

Yang Yang, Jianhui Hou, Lijun Huo, 2009 .

Enhanced Efficiency in Fullerene-Free Polymer Solar Cell by Incorporating Fine-designed Donor and Acceptor Materials.

Long Ye, Kai Sun, Wei Jiang, 2015, ACS applied materials & interfaces.

A Fluorinated Polythiophene Derivative with Stabilized Backbone Conformation for Highly Efficient Fullerene and Non-Fullerene Polymer Solar Cells

Jianhui Hou, Shaoqing Zhang, H. Woo, 2016 .

A new n-type low bandgap conjugated polymer P-co-CDT: synthesis and excellent reversible electrochemical and electrochromic properties.

Jianhui Hou, Teresa L. Chen, Shaoqing Zhang, 2008, Chemical communications.

Fine-Tuned Photoactive and Interconnection Layers for Achieving over 13% Efficiency in a Fullerene-Free Tandem Organic Solar Cell.

H. Yao, Jianhui Hou, Bowei Xu, 2017, Journal of the American Chemical Society.

PBDB-T and its derivatives: A family of polymer donors enables over 17% efficiency in organic photovoltaics

H. Yao, Jianhui Hou, Shaoqing Zhang, 2020 .

Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages

Jianqi Zhang, H. Yao, Ling Hong, 2019, Nature Communications.

Quantifying Voc loss induced by alkyl pendants of acceptors in organic solar cells

Jianhui Hou, Shaoqing Zhang, Xiaoyu Liu, 2020 .

Energy‐Level Modulation of Small‐Molecule Electron Acceptors to Achieve over 12% Efficiency in Polymer Solar Cells

Long Ye, Harald Ade, Jianhui Hou, 2016, Advanced materials.

Breaking the 10% Efficiency Barrier in Organic Photovoltaics: Morphology and Device Optimization of Well‐Known PBDTTT Polymers

Jianhui Hou, Shaoqing Zhang, L. Ye, 2016 .

Realizing over 10% efficiency in polymer solar cell by device optimization

Jianhui Hou, Shaoqing Zhang, L. Ye, 2015, Science China Chemistry.

Highly Efficient 2D-Conjugated Benzodithiophene-Based Photovoltaic Polymer with Linear Alkylthio Side Chain

Long Ye, Huifeng Yao, Jianhui Hou, 2014 .

Synthesis of a low band gap polymer and its application in highly efficient polymer solar cells.

Gang Li, Yang Yang, Jianhui Hou, 2009, Journal of the American Chemical Society.

Low‐cost and efficient organic solar cells based on polythiophene‐ and poly(thiophene vinylene)‐related donors

Jianhui Hou, Shaoqing Zhang, Chenyi Yang, 2021, Aggregate.

15.3% efficiency all-small-molecule organic solar cells enabled by symmetric phenyl substitution

Jianqi Zhang, H. Yao, Kaihu Xian, 2020, Science China Materials.

Influence of the replacement of alkoxyl with alkylthienyl on photovoltaic properties of two small molecule donors for organic solar cells

Yun Zhang, Jianqi Zhang, Jianhui Hou, 2017, Science China Chemistry.

New Wide Band Gap Donor for Efficient Fullerene-Free All-Small-Molecule Organic Solar Cells.

Yun Zhang, Jianqi Zhang, H. Yao, 2017, Journal of the American Chemical Society.

Title MoOx and V 2 Ox as hole and electron transport layers through functionalized intercalation in normal and inverted organic optoelectronic devices

Jianhui Hou, Shaoqing Zhang, Xinchen Li, 2015 .

Over 1.1 eV Workfunction Tuning of Cesium Intercalated Metal Oxides for Functioning as Both Electron and Hole Transport Layers in Organic Optoelectronic Devices

Jianhui Hou, W. Choy, Shaoqing Zhang, 2014 .

Achieving over 10% efficiency in P3HT-based organic solar cells via solid additives.

Jianhui Hou, Shaoqing Zhang, Chenyi Yang, 2021, ChemSusChem.

Suppressing Energetic Disorder Enables Efficient Indoor Organic Photovoltaic Cells With a PTV Derivative

Jianhui Hou, Shaoqing Zhang, Pengqing Bi, 2021, Frontiers in Chemistry.

Molecular design revitalizes the low-cost PTV-polymer for highly efficient organic solar cells

Jianqi Zhang, Jianhui Hou, Zhixiang Wei, 2021, National science review.

Modulation of Building Block Size in Conjugated Polymers with D–A Structure for Polymer Solar Cells

H. Ade, H. Yao, Jianhui Hou, 2019, Macromolecules.

Environmentally-friendly solvent processed fullerene-free organic solar cells enabled by screening halogen-free solvent additives

H. Ade, Yun Zhang, Jianhui Hou, 2017, Science China Materials.

Low band-gap conjugated polymer based on diketopyrrolopyrrole units and its application in organic photovoltaic cells

H. Yao, Jianhui Hou, Hao Zhang, 2017 .

Effectively Improving Extinction Coefficient of Benzodithiophene and Benzodithiophenedione-based Photovoltaic Polymer by Grafting Alkylthio Functional Groups.

H. Yao, Jianhui Hou, Hao Zhang, 2016, Chemistry, an Asian journal.

Realizing 11.3% efficiency in fullerene-free polymer solar cells by device optimization

Jianhui Hou, Shaoqing Zhang, Wenchao Zhao, 2016, Science China Chemistry.

Perovskite-polymer hybrid solar cells with near-infrared external quantum efficiency over 40%

Jianhui Hou, Hao Zhang, Shaoqing Zhang, 2015, Science China Materials.

Rational selection of solvents and fine tuning of morphologies toward highly efficient polymer solar cells fabricated using green solvents

Jianhui Hou, Shaoqing Zhang, W. Ma, 2015 .

A universal halogen-free solvent system for highly efficient polymer solar cells

Jianhui Hou, Shaoqing Zhang, Mingliang Sun, 2015 .

From Binary to Ternary Solvent: Morphology Fine‐tuning of D/A Blends in PDPP3T‐based Polymer Solar Cells

Long Ye, Wei Ma, Harald Ade, 2012, Advanced materials.

Sulfonyl: a new application of electron-withdrawing substituent in highly efficient photovoltaic polymer.

Yongfang Li, Jianhui Hou, Shaoqing Zhang, 2011, Chemical communications.

Morphology control enables thickness-insensitive efficient nonfullerene polymer solar cells

H. Ade, Jianhui Hou, Shaoqing Zhang, 2017 .

A Potential Perylene Diimide Dimer‐Based Acceptor Material for Highly Efficient Solution‐Processed Non‐Fullerene Organic Solar Cells with 4.03% Efficiency

Long Ye, Yang Liu, Bo Jiang, 2013, Advanced materials.

Over 11% Efficiency in Tandem Polymer Solar Cells Featured by a Low‐Band‐Gap Polymer with Fine‐Tuned Properties

Jianqi Zhang, Zhong Zheng, Runnan Yu, 2016, Advanced materials.

A polybenzo[1,2-b:4,5-b']dithiophene derivative with deep HOMO level and its application in high-performance polymer solar cells.

Yang Yang, Jianhui Hou, Lijun Huo, 2010, Angewandte Chemie.

Control of Mesoscale Morphology and Photovoltaic Performance in Diketopyrrolopyrrole‐Based Small Band Gap Terpolymers

H. Ade, H. Yao, Jianhui Hou, 2017 .

Achieving 12.8% Efficiency by Simultaneously Improving Open‐Circuit Voltage and Short‐Circuit Current Density in Tandem Organic Solar Cells

Jiang Huang, Zhong Zheng, Huifeng Yao, 2017, Advanced materials.

Progress in Organic Solar Cells: Materials, Physics and Device Engineering

Jianhui Hou, Shaoqing Zhang, Pengqing Bi, 2021, Chinese Journal of Chemistry.

Effects on the photovoltaic properties of copolymers with five-membered chalcogen-π-heterocycle bridges

Jianhui Hou, Jiao Liu, Shaoqing Zhang, 2020 .

Effect of solvent additive on active layer morphologies and photovoltaic performance of polymer solar cells based on PBDTTT-C-T/PC71BM

Yongfang Li, Jianhui Hou, Shaoqing Zhang, 2016 .

Dialkylthio Substitution: An Effective Method to Modulate the Molecular Energy Levels of 2D-BDT Photovoltaic Polymers.

H. Yao, Jianhui Hou, Hao Zhang, 2016, ACS applied materials & interfaces.

Molecular Design and Application of a Photovoltaic Polymer with Improved Optical Properties and Molecular Energy Levels

H. Yao, Jianhui Hou, Hao Zhang, 2015 .

Toward reliable and accurate evaluation of polymer solar cells based on low band gap polymers

Jianhui Hou, Shaoqing Zhang, L. Ye, 2015 .

Ultrathin Polyaniline-based Buffer Layer for Highly Efficient Polymer Solar Cells with Wide Applicability

Jianhui Hou, Shaoqing Zhang, Mingliang Sun, 2014, Scientific Reports.

An Easy and Effective Method to Modulate Molecular Energy Level of the Polymer Based on Benzodithiophene for the Application in Polymer Solar Cells

Wei Ma, Harald Ade, Jianhui Hou, 2014, Advanced materials.

Influence of the backbone conformation of conjugated polymers on morphology and photovoltaic properties

Jianhui Hou, Shaoqing Zhang, Zhao-jun Li, 2014 .

Molecular design toward efficient polymer solar cells with high polymer content.

Long Ye, Zhaojun Li, Wei Ma, 2013, Journal of the American Chemical Society.

Enhanced Photovoltaic Performance of Diketopyrrolopyrrole (DPP)- Based Polymers with Extended π Conjugation

Zhaojun Li, Jianhui Hou, Shaoqing Zhang, 2013 .

Benzodifuran-alt-thienothiophene based low band gap copolymers: substituent effects on their molecular energy levels and photovoltaic properties

Zhaojun Li, Jianhui Hou, Shaoqing Zhang, 2013 .

A thieno[3,4-f]isoindole-5,7-dione based copolymer for polymer solar cells

Jianhui Hou, Shaoqing Zhang, Lijun Huo, 2013 .

Influence of D/A Ratio on Photovoltaic Performance of a Highly Efficient Polymer Solar Cell System

Yongfang Li, Jianhui Hou, Shaoqing Zhang, 2012, Advanced materials.

Design, Application, and Morphology Study of a New Photovoltaic Polymer with Strong Aggregation in Solution State

Jianhui Hou, Yongri Liang, Shaoqing Zhang, 2012 .

Conjugated and Nonconjugated Substitution Effect on Photovoltaic Properties of Benzodifuran-Based Photovoltaic Polymers

Zhaojun Li, Jianhui Hou, Shaoqing Zhang, 2012 .

Application of Two-Dimensional Conjugated Benzo(1,2-b:4,5- b')dithiophene in Quinoxaline-Based Photovoltaic Polymers

Jianhui Hou, Shaoqing Zhang, Lijun Huo, 2012 .

PBDTTTZ: A Broad Band Gap Conjugated Polymer with High Photovoltaic Performance in Polymer Solar Cells

Yongfang Li, Jianhui Hou, Xia Guo, 2011 .

Printable SnO2 cathode interlayer with up to 500 nm thickness-tolerance for high-performance and large-area organic solar cells

Yongfang Li, Jianhui Hou, Shaoqing Zhang, 2020, Science China Chemistry.

Interfacial engineering and optical coupling for multicolored semitransparent inverted organic photovoltaics with a record efficiency of over 12%

T. Hayat, Yongfang Li, Jianhui Hou, 2019, Journal of Materials Chemistry A.

Fluorination strategy enables greatly improved performance for organic solar cells based on polythiophene derivatives

Jianhui Hou, Shaoqing Zhang, Chenyi Yang, 2021, Chinese Chemical Letters.

Design of a Fully Non-Fused Bulk Heterojunction toward Efficient and Low-Cost Organic Photovoltaics.

H. Yao, Jianhui Hou, Shaoqing Zhang, 2022, Angewandte Chemie.

Enhanced charge extraction in organic solar cells through electron accumulation effects induced by metal nanoparticles

W. Sha, C. Leung, Jianhui Hou, 2013 .

Competition between morphological attributes in the thermal annealing and additive processing of polymer solar cells

H. Ade, Jianhui Hou, Shaoqing Zhang, 2013 .

An inorganic molecule-induced electron transfer complex for highly efficient organic solar cells

H. Yao, Jianhui Hou, Bowei Xu, 2020 .

An Easy and Effective Method To Modulate Molecular Energy Level of Poly(3-alkylthiophene) for High-Voc Polymer Solar Cells

Srinivas Sista, Yang Yang, Jianhui Hou, 2009 .

Modulating Molecular Orientation Enables Efficient Nonfullerene Small-Molecule Organic Solar Cells

Jie Zhu, Yun Zhang, Jianqi Zhang, 2018 .

Optimization of active layer morphology by small-molecule donor design enables over 15% efficiency in small-molecule organic solar cells

H. Ade, Jianhui Hou, Cunbin An, 2021 .

Enhanced Photovoltaic Performance by Modulating Surface Composition in Bulk Heterojunction Polymer Solar Cells Based on PBDTTT‐C‐T/PC71BM

Fei Huang, Long Ye, Wei Ma, 2014, Advanced materials.

Study of photovoltaic performances for asymmetrical and symmetrical chlorinated thiophene-bridge-based conjugated polymers

Jianqi Zhang, Jianhui Hou, Cunbin An, 2020 .

Toward efficient non-fullerene polymer solar cells: Selection of donor polymers

Jianhui Hou, Shaoqing Zhang, L. Ye, 2015 .

A Switchable Interconnecting Layer for High Performance Tandem Organic Solar Cell

Jianhui Hou, Wallace C. H. Choy, Jianhui Hou, 2017 .

An Easily Accessible Cathode Buffer Layer for Achieving Multiple High Performance Polymer Photovoltaic Cells

H. Yao, Jianhui Hou, Shaoqing Zhang, 2015 .

A Medium‐Bandgap Nonfullerene Acceptor Enabling Organic Photovoltaic Cells with 30% Efficiency under Indoor Artificial Light

Yezhou Yang, H. Yao, Jianhui Hou, 2022, Advanced materials.

High-performance organic photovoltaic cells under indoor lighting enabled by suppressing energetic disorders

Jianhui Hou, Shaoqing Zhang, Pengqing Bi, 2023, Joule.

Application of Bis-PCBM in Polymer Solar Cells with Improved Voltage

Jianhui Hou, Shaoqing Zhang, L. Ye, 2013 .

Completely non-fused ring acceptors with low non-radiative energy loss enabled by end-group modulation

Yezhou Yang, Hao Li, Jianhui Hou, 2023, Journal of Materials Chemistry C.

Reduced Non-radiative Recombination Energy Loss Enabled Efficient Polymer Solar Cells via Tuning Alkyl Chain Positions on Pendent Benzene Units of Polymers.

H. Yao, Jianhui Hou, S. Cao, 2020, ACS applied materials & interfaces.

Self‐Assembled Quasi‐3D Nanocomposite: A Novel p‐Type Hole Transport Layer for High Performance Inverted Organic Solar Cells

K. Wong, Jianhui Hou, W. Choy, 2018 .

Enhancing the Performance of the Half Tin and Half Lead Perovskite Solar Cells by Suppression of the Bulk and Interfacial Charge Recombination

Jianhui Hou, R. Chiechi, M. Loi, 2018, Advanced materials.

An Ortho-Bisalkyloxylated Benzene-Based Fully Non-fused Electron Acceptor for Efficient Organic Photovoltaic Cells.

Yezhou Yang, H. Yao, Jianhui Hou, 2023, Small methods.

Tandem organic solar cells with 20.6% efficiency enabled by reduced voltage losses

Shaoqing Zhang, Yongfang Li, Zhong Zheng, 2023, National science review.

Binary Organic Solar Cells with 19.2% Efficiency Enabled by Solid Additive

Jianhui Hou, Shaoqing Zhang, Zhong Zheng, 2023, Advanced materials.

Enhancing Photon Utilization Efficiency for High‐Performance Organic Photovoltaic Cells via Regulating Phase‐Transition Kinetics

Jianqi Zhang, Jianhui Hou, Zhixiang Wei, 2023, Advanced materials.

Robust and hydrophobic interlayer material for efficient and highly stable organic solar cells

Yezhou Yang, Jianhui Hou, Bowei Xu, 2023, Joule.

New Method for Preparing ZnO Layer for Efficient and Stable Organic Solar Cells

Jianhui Hou, Cunbin An, Shaoqing Zhang, 2022, Advanced materials.

Fluidic Manipulating of Printable Zinc Oxide for Flexible Organic Solar Cells

Jianhui Hou, Bowei Xu, Shaoqing Zhang, 2021, Advanced materials.

Molecule Design of Novel Electron Acceptor with Superior Chemical Stability for Photovoltaic Applications

Yezhou Yang, Jianhui Hou, Shaoqing Zhang, 2023, Advanced Functional Materials.

Rational control of meniscus-guided coating for organic photovoltaics

Hao Li, Jianhui Hou, Shaoqing Zhang, 2023, Science Advances.

Green‐Solvent‐Processed All‐Polymer Solar Cells Containing a Perylene Diimide‐Based Acceptor with an Efficiency over 6.5%

Long Ye, Bei Yang, Huifeng Yao, 2016 .

High‐Efficiency and Mechanically Robust All‐Polymer Organic Photovoltaic Cells Enabled by Optimized Fibril Network Morphology

Jianqi Zhang, H. Yao, Kaihu Xian, 2022, Advanced materials.

Rational control of meniscus-guided coating for organic photovoltaics

Hao Li, Jianhui Hou, Shaoqing Zhang, 2023, Science advances.

Increased conjugated backbone twisting to improve carbonylated-functionalized polymer photovoltaic performance

Kaihu Xian, Jianhui Hou, Cunbin An, 2020 .

Solution-processable perylene diimide based star-shaped small molecule acceptor: synthesis and photovoltaic properties

Bo Jiang, Jianhui Hou, Chuanlang Zhan, 2014, Optics & Photonics - Photonic Devices + Applications.

Sulfonyl: a new application of electron-withdrawing substituent in highly efficient photovoltaic polymer.

Yongfang Li, Jianhui Hou, Shaoqing Zhang, 2011, Chemical communications.

Improved Domain Size and Purity Enables Efficient All‐Small‐Molecule Ternary Solar Cells

Yun Zhang, Jianhui Hou, Hao Zhang, 2017, Advanced materials.

Manipulating Aggregation and Molecular Orientation in All‐Polymer Photovoltaic Cells

H. Ade, H. Yao, Jianhui Hou, 2015, Advanced materials.

Exquisite modulation of ZnO nanoparticle electron transporting layer for high-performance fullerene-free organic solar cell with inverted structure

Z. Tang, Y. Zhang, Jianqi Zhang, 2019, Journal of Materials Chemistry A.

Molecular design toward efficient polymer solar cells processed by green solvents

Jianhui Hou, Shaoqing Zhang, Yu Chen, 2015 .

Fullerene‐Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability

O. Inganäs, Jianhui Hou, Shaoqing Zhang, 2016, Advanced materials.

Influence of D/A Ratio on Photovoltaic Performance of a Highly Efficient Polymer Solar Cell System

Yongfang Li, Jianhui Hou, Shaoqing Zhang, 2012, Advanced materials.

High Efficiency Organic Solar Cells Achieved by the Simultaneous Plasmon-Optical and Plasmon-Electrical Effects from Plasmonic Asymmetric Modes of Gold Nanostars.

Jianhui Hou, W. Choy, Shaoqing Zhang, 2016, Small.

Two Well‐Miscible Acceptors Work as One for Efficient Fullerene‐Free Organic Solar Cells

H. Yao, Jianhui Hou, Hao Zhang, 2017, Advanced materials.

Ternary Polymer Solar Cells based on Two Acceptors and One Donor for Achieving 12.2% Efficiency

Jianhui Hou, Shaoqing Zhang, Xiaoyu Liu, 2017, Advanced materials.

Achieving 12.8% Efficiency by Simultaneously Improving Open‐Circuit Voltage and Short‐Circuit Current Density in Tandem Organic Solar Cells

H. Yao, Jianhui Hou, Shaoqing Zhang, 2017, Advanced materials.

A Potential Perylene Diimide Dimer‐Based Acceptor Material for Highly Efficient Solution‐Processed Non‐Fullerene Organic Solar Cells with 4.03% Efficiency

Jianhui Hou, Shaoqing Zhang, J. Yao, 2013, Advanced materials.

Carboxylic-substituted polymer design strategy enabled halogen-free solvent processed efficient organic solar cells

Shaoqing Zhang, Chenyi Yang, Lijiao Ma, 2023, Polymer.

Efficient Polymer Solar Cells Based on Benzothiadiazole and Alkylphenyl Substituted Benzodithiophene with a Power Conversion Efficiency over 8%

Jianhui Hou, Shaoqing Zhang, Lijun Huo, 2013, Advanced materials.

Design of Chlorinated Indaceno[1,2-b:5,6-b']dithiophene Acceptors toward Efficient Organic Photovoltaics.

Shaoqing Zhang, Lijiao Ma, Junzhen Ren, 2023, ACS applied materials & interfaces.