Sunil Kumar

发表

Parameter extraction using global particle swarm optimization approach and the influence of polymer processing temperature on the solar cell parameters

Sunil Kumar, A. Singh, A. Dhar, 2017 .

Review on Effect of Reinforcement on Stir Casting Aluminium Metal Matrix Composite

Sunil Kumar, Dr. Ashok Kumar Mishra, 2020 .

Performance evaluation of cryogenically treated wires during wire electric discharge machining of AISI D3 die tool steel under different cutting environments

K. Goyal, Sunil Kumar, Husandeep Sharma, 2019, Multidiscipline Modeling in Materials and Structures.

Mechanical Properties of Abaca Fiber Reinforced Urea Formaldehyde Composites

Sunil Kumar, A. Suvarna, Akash Katagi, 2015 .

Orientation-dependent crack-tip blunting and crack propagation in a single crystal BCC iron

S. Paul, Sunil Kumar, S. Tarafder, 2018, Bulletin of Materials Science.

Deep Drilling of Stainless Steel-316L with Brass Electrode on Orbital EDM

Sunil Kumar, Prabhjot Singh, A. Aggarwal, 2021, Advances in Mechanical Engineering.

Comprehensive structural, nanomechanical and tribological evaluation of silver doped DLC thin film coating with chromium interlayer (Ag-DLC/Cr) for biomedical application

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2020 .

Influence of Current on Microstructure and Hardness of Butt Welding Aluminium AA 6082 Using GTAW Process

Sunil Kumar, Amrik Singh, Gurjinder Singh, 2013 .

Application of Graph Theory : a Review

K. Jangra, Sunil Kumar, Ravi Kalra, 2012 .

Improvement in Wear Properties of a Hypereutectic Aluminium Silicon Alloy with Manganese

D. K. Dwivedi, Sunil Kumar, P. Pathak, 2014 .

An Effect of Current on Mechanical Properties and SEM Characterization of Butt Joint of Aluminium AA6082 Using GTAW

Sunil Kumar, Amrik Singh, P. Kaur, 2021 .

Accounting Bauschinger effect in the numerical simulation of constrained groove pressing process

S. Paul, Sunil Kumar, Hariharan Krishnaswamy, 2019, Journal of Manufacturing Processes.

Wear assessment of Cr 2 O 3 /TiAlN coated DAC‐10 tool steel against steel and Al 2 O 3 counterbodies

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021, International Journal of Applied Ceramic Technology.

An Experimental Study on the Effect of Process Parameters on Surface Roughness in Single Point Incremental Forming

Sunil Kumar, Rahul Jagtap, Amol A. Patil, 2015 .

Incremental Sheet Forming: An Experimental Study on the Geometric Accuracy of Formed Parts

Sunil Kumar, Rahul Jagtap, 2018, Lecture Notes in Mechanical Engineering.

OPTIMIZATION OF MACHINING CHARACTERISTICS IN WEDM OF AISI D2 TOOL STEEL USING TAGUCHI METHOD

Sunil Kumar, 2015 .

Application of Taguchi Method and Grey Relational Analysis in Optimization of Machining Processes : a Review

K. Jangra, Sunil Kumar, Parveen Kamboj, 2012 .

Comparative study on the structural make-up and mechanical behavior of silicon and silver doped amorphous carbon films

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2022, Silicon.

Friction and tribological behavior of bare nitrided, TiAlN and AlCrN coated MDC-K hot work tool steel

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2020 .

Wear Parameter Optimization of Ceramic Coating Using the Fuzzy Integrated PSI-CODAS Decision-Making Framework

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2022, Arabian Journal for Science and Engineering.

Die casting parameters and simulations for crankcase of automobile using MAGMAsoft

Sunil Kumar, I. Saravanan, Lokeswar Patnaik, 2020 .

Modeling of wear parameters and multi-criteria optimization by Box-Behnken design of AlCrN thin film against gamma-irradiated Ti6Al4V counterbody

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021, Ceramics International.

Effect of annealing on structural, mechanical and tribological properties of Cr-(CrN/TiAlN) coating

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021, Advances in Materials and Processing Technologies.

Evaluation of Gamma irradiated Ti6Al4V and Silver alloyed a-C coatings as friction pair via Response Surface Methodology

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021, Advances in Materials and Processing Technologies.

PREPARATION AND CHARACTERIZATION OF SHORT ARECA LEAF FIBER REINFORCED EPOXY AND VINYL ESTER COMPOSITES

Sunil Kumar, 2014 .

ROLE OF HEAT TREATMENT AND EVALUATION OF MECHANICAL PROPERTIES OF Al LM13 REINFORCED WITH HEMATITE

Sunil Kumar, Batluri Tilak Chandra, M. M. Reddy, 2016 .

Relative effect of wear parameters on the wear behavior of TiAlN coated tool steel and parametric optimization using MCDM method

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2022, Advances in Materials and Processing Technologies.

Molar Volume and Compressibility Studies of Some Alkaline Earth Metal Chlorides in 4% Fructose + 0.01 m Aqueous Sodium Chlorides

Sunil Kumar, S. Kant, Dharmvir Singh, 2012 .

Comparative study on the structural make-up and mechanical behavior of silicon and silver doped amorphous carbon films

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2022, Silicon.

Synergistic optimization of electrocoagulation process parameters using response surface methodology for treatment of hazardous waste landfill leachate.

Sunil Kumar, Pratibha Gautam, S. Vishwakarma, 2021, Chemosphere.

Wear parameter optimization for CrN/TiAlSiN coating using novel BWM integrated TODIM decision-making approach

Sunil Kumar, S. Maity, V. Venkatesh, 2022, International Journal on Interactive Design and Manufacturing (IJIDeM).

Computational Wear Analysis of Acetabular Cup for Various Daily Activities with Different Biomaterials

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2020 .

Synthesis and enhanced mechanical properties of MgO substituted hydroxyapatite: a bone substitute material

V. Mishra, Sunil Kumar, S. Jose, 2016 .

Effect of tribological process parameters on the wear and frictional behaviour of Cr-(CrN/TiN) composite coating: An experimental and analytical study

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021, Ceramics International.

The role of silicon in the corrosion of AA6061 aluminium alloy laser weldments

Sunil Kumar, A. Gerson, A. Rahman, 2010 .

Fuzzy CODAS Based Analysis of Wear and Temperature Induced Responses of Si Doped a-C film and CFRPEEK Tribopair

Sunil Kumar, S. Maity, M. Łępicka, 2022, Silicon.

Effect of lubricated sliding wear against CFRPEEK on the nanomechanical properties of Ag alloyed Cr/DLC thin film.

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021, Journal of the mechanical behavior of biomedical materials.

Mechanical and tribological assessment of composite AlCrN or a-C:Ag-based thin films for implant application

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2020 .

The speciation of Si and other alloying elements in the oxide surface film of galvanically corroded weld fusion zone of laser welded AA6061 aluminium alloy

Sunil Kumar, A. Gerson, A. Rahman, 2008 .

Galvanic corrosion of laser weldments of AA6061 aluminium alloy

Sunil Kumar, A. Gerson, A. Rahman, 2007 .

Enhancement of microstructure and mechanical performance of spray formed Al-6Si-18Pb alloy by warm rolling

K. Pandey, Sunil Kumar, S. Maity, 2022 .

Effect of heat treatment and TiN coating on AISI O1 cold work tool steel

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2020 .

Mechanical and Scratch behaviour of TiAlN Coated and 3D Printed H13 Tool Steel

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021, Advances in Materials and Processing Technologies.

A Study of Short Areca Fiber and Wood Powder Reinforced Phenol Formaldehyde Composites

Sunil Kumar, Vinod Kumar, K. Srinivasa, 2015 .

Status of nickel free stainless steel in biomedical field: A review of last 10 years and what else can be done

Sunil Kumar, Lokeswar Patnaik, Saikat Ranjan Maity, 2020 .

Optimization of Wear Parameters for Duplex-TiAlN Coated MDC-K Tool Steel Using Fuzzy MCDM Techniques

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2022, Operational Research in Engineering Sciences: Theory and Applications.

Box–Behnken based investigation of surface quality and tool wear rate and FEM analysis of tool wear in TiAlN/CrN coated carbide tool

Sunil Kumar, S. Maity, P. Devi, 2022, International Journal on Interactive Design and Manufacturing (IJIDeM).

Morphology and Wear Behavior of Monolayer TiAlN and Composite AlCrN/TiAlN-Coated Plasma-Nitrided DAC-10 Tool Steel

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2022, Arabian Journal for Science and Engineering.

Relation between mechanical and tribological properties of plasma nitrided and TiCrN coated YXR-7 tool steel

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021, NATIONAL CONFERENCE ON PHYSICS AND CHEMISTRY OF MATERIALS: NCPCM2020.

Evaluation of Crack resistance and Adhesive Energy of AlCrN and Ag doped a-C Films deposited on Chrome Nitrided 316 LVM Stainless Steel

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021, Advances in Materials and Processing Technologies.

DLC/CrN or AlCrN/CrN composite films: The better candidate in terms of anti-Wear performance and lesser ion release in hip implant

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021 .

Structural and corrosion study of a-C film with Ti, Cr and Ni interlayers

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021, NATIONAL CONFERENCE ON PHYSICS AND CHEMISTRY OF MATERIALS: NCPCM2020.

Microstructure Evolution During Hot Deformation of a Micro-Alloyed Steel

V. Rajinikanth, Sunil Kumar, V. Srivastava, 2017, Transactions of the Indian Institute of Metals.

Optimization of surface roughness and material removal rate in milling of AISI 1005 carbon steel using Taguchi approach

Sunil Kumar, I. Saravanan, Lokeswar Patnaik, 2020 .

Evaluation of Strain Hardening During Uniaxial Tensile Loading Followed by Stress Relaxation and Reloading

Sunil Kumar, 2022, Metallurgical and Materials Transactions A.

Transient Stress Relaxation Test to Identify Material Constants in Dislocation Density Model

F. Barlat, Sunil Kumar, Myoung-Gyu Lee, 2022, Metallurgical and Materials Transactions A.

Application of Integrated BWM Fuzzy-MARCOS Approach for Coating Material Selection in Tooling Industries

Saikat Ranjan Maity, Lokeswar Patnaik, Sunil Kumar, 2021, Materials.

Semi Solid Forming of A356 Al Alloy by Rapid Slurry Forming Process

Sunil Kumar, A. Sharma, S. Sharma, 2012 .

Experimental study on tensile strength of Al2024/SiC/FA/Graphite hybrid MMC prepared by stir casting

N. Sharma, Sunil Kumar, K. Goyal, 2022, Materials Today: Proceedings.

Microstructural and engineering properties investigation of sustainable hybrid concrete produced from industrial wastes

Sunil Kumar, S. Ram, Udita Gupta, 2021 .

Effect of Mean Stress on Ratcheting of Austenitic Stainless Steel (AISI 304) at Room Temperature

Sunil Kumar, Lokeswar Patnaik, Saikat Ranjan Maity, 2022, Physics of Metals and Metallography.

Developing methods of constrained groove pressing technique: A review

Sunil Kumar, 2022, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.

Effect of NaBr on the Structural, Thermal and Mechanical Properties of HPMC:NaBr Composite Films

Sunil Kumar, S. Raghu, T. Demappa, 2022, Asian Journal of Chemistry.

Optimization of Extrusion Process Parameters for Red Lentil-carrot Pomace Incorporated Ready-to-eat Expanded Product Using Response Surface

Sunil Kumar, M. Alam, 2014 .

Optimization on tribological properties of natural fiber reinforced brake friction composite materials: Effect of objective and subjective weighting methods

Lalit Ranakoti, Vedant Singh, Sunil Kumar, 2022, Polymer Testing.

EFFECT OF BIO-FILLER ON MECHANICAL AND CURE PROPERTIES OF RECLAIM RUBBER

Kazi, Sunil Kumar, Sandeep K. Rai, 2017 .

Effect of loading conditions on nucleation of nano void and failure of nanocrystalline aluminum: An atomistic investigation

S. Paul, Sunil Kumar, S. Tarafder, 2017 .

Carbon-fibre-reinforced-PEEK and silicon doped amorphous carbon as a potential tribopair for implant application

Sunil Kumar, A. Deepak, V. Venkatesh, 2023, Advances in Materials and Processing Technologies.

A Review on Slug Reversal During Punching And Blanking

Sunil Kumar, Saikat Ranjan Maity, Lokeswar Patnaik, 2019, Materials Today: Proceedings.

Experimental Investigations of Surface Roughness of Inconel 718 under different Machining Conditions

Dilbag Singh, Nirmal S. Kalsi, N. S. Kalsi, 2017 .

INCONEL 718 WITH SOLID LUBRICANTS

N. S. Kalsi, Sunil Kumar, Dilbag Singh, 2018 .

Factor Effecting Electro-Deposition Process

Sunil Kumar, S. Pande, Prateek Verma, 2015 .

A comparative study on wear behaviors of hot work and cold work tool steel with same hardness under dry sliding tribological test

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021 .

Fused deposition modelling: a review

Deepak Panghal, Sunil Kumar, Soham Teraiya, 2020, Rapid Prototyping Journal.

PREPARATION AND CHARACTERIZATION OF ARECA BAST FIBER REINFORCED EPOXY AND VINYL ESTER COMPOSITES

Sunil Kumar, S. Gopalakrishna, K. Rai, 2015 .

Delamination Detection and Evaluation in Composite Laminates Using Guided Ultrasonic Waves

Sunil Kumar, A. Aggarwal, Gurdyal Singh, 2021, Lecture Notes in Mechanical Engineering.

Effects of Partially Replacing Meta-Kaolin, Fly-Ash and Rice-Husk Ash on Flexural of Concrete

Sunil Kumar, S. Nambiar, 2018 .

Adhesion Failure Behavior of Ni-TiO2-Al2O3 & Ni-Al2O3 Composite Layers Coatings Evaluated using Microscratch Testing

Sunil Kumar, S. Pande, Prateek Verma, 2015 .

Delamination Analysis of Composite Laminate

Sunil Kumar, S. Pande, Prateek Verma, 2015 .

Experimental studies and multi-response optimisation of duplex turning parameters using grey relational analysis with entropy measurement

Sunil Kumar, Ravindra Nath Yadav, Raghuvir Kumar, 2020, International Journal of Precision Technology.

Re-examination and comparison of activation volume, strain rate sensitivity, and dislocation density for coarse grain and CGP-processed UFG materials

Sunil Kumar, 2023, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.

Effect of wear parameters and their optimization for wear characteristics of TiCrN thin film using novel MCDM method

Sunil Kumar, S. Bhaumik, Lokeswar Patnaik, 2023, Materials Today: Proceedings.

Structural and Mechanical characteristic study of HPMC polymer composite films

Sunil Kumar, T. Demappa, J. Sannappa, 2022, IOP Conference Series: Materials Science and Engineering.

Evaluation of mechanical properties of friction stir welded commercially pure aluminium

Sunil Kumar, B. Ravisankar, Suresh Kumar, 2018 .

Effect of interstitial compounds in controlling thermal contact conductance across pressed joints at cryogenic temperature and low contact pressure

Sunil Kumar, N. A. Kumar, Reji Joseph, 2021, Applied Thermal Engineering.

Effect of thermal and load cycle on thermal contact conductance across dissimilar joints at cryogenic temperature.

Sunil Kumar, N. A. Kumar, Sanjay Kumar, 2017 .

A case study on quality improvement of connecting rod assembly line using Six Sigma DMAIC cycle

Brijesh Kumar Gupta, Prabhkiran Kaur, Gayatri Brahma, 2020, International Journal of Six Sigma and Competitive Advantage.

Investigating the Effect of Approach Angle and Nose Radius on Surface Quality of Inconel 718

N. S. Kalsi, Sunil Kumar, Dilbag Singh, 2019 .

Investigating the Effect of Approach Angle and Nose Radius on Surface Quality of Inconel 718

N. S. Kalsi, Sunil Kumar, Dilbag Singh, 2017, Journal of The Institution of Engineers (India): Series C.

Effect of Geometric Discontinuity on Stress Concentration Factor of Al6061T6 Alloy under Bending Load

Sunil Kumar, N. V. Londe, A. S. Saviraj, 2017 .

A novel BWM integrated MABAC decision-making approach to optimize the wear parameter of CrN/TiAlSiN coating

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2022, Journal of Industrial and Management Optimization.

Lubricated sliding of CFRPEEK/AlCrN film tribo-pair and its effect on the mechanical properties and structural integrity of the AlCrN film

Sunil Kumar, S. Maity, Lokeswar Patnaik, 2021 .