I. Mondragon

发表

Effect of diisocyanate structure on the properties and microstructure of polyurethanes based on polyols derived from renewable resources

M. Corcuera, L. Rueda, A. Saralegui, 2011 .

Effect of the ceramic filler features on the properties of photopolymerized BaTiO3-acrylic composites

M. Lombardi, I. Mondragon, M. Sangermano, 2011 .

Surface modification of fique fibers. Effect on their physico‐mechanical properties

I. Mondragon, P. Gañán, 2002 .

Effects of fibre treatment on wettability and mechanical behaviour of flax/polypropylene composites

I. Mondragon, A. Arbelaiz, G. Cantero, 2003 .

Thermal and crystallization studies of short flax fibre reinforced polypropylene matrix composites: Effect of treatments

I. Mondragon, A. Arbelaiz, B. Fernandez, 2006 .

Mechanical properties of short flax fibre bundle/polypropylene composites: Influence of matrix/fibre modification, fibre content, water uptake and recycling

A. Retegi, I. Mondragon, A. Arbelaiz, 2005 .

Physico-chemical characterization of lignins from different sources for use in phenol-formaldehyde resin synthesis.

I. Mondragon, J. Labidi, A. Tejado, 2007, Bioresource technology.

Mechanical properties of flax fibre/polypropylene composites. Influence of fibre/matrix modification and glass fibre hybridization

I. Mondragon, A. Arbelaiz, G. Cantero, 2005 .

Mechanical properties of short flax fibre bundle/poly(ε-caprolactone) composites: Influence of matrix modification and fibre content

I. Mondragon, A. Arbelaiz, B. Fernandez, 2006 .

Kinetic studies of the polymerization of an epoxy resin modified with rhodamine B

I. Mondragon, R. Fernández, B. F. d’Arlas, 2009 .

Structural characterization of bacterial cellulose produced by Gluconacetobacter swingsii sp. from Colombian agroindustrial wastes

Robin Zuluaga, Cristina Castro, J. Putaux, 2011 .

Cure chemo-rheology of mixtures based on epoxy resins and ester cyanates

I. Harismendy, I. Mondragon, Iñaki Mondragon, 1999 .

Fabrication of surface‐relief gratings on an azobenzene‐containing epoxy‐based polymer film using atomic force microscopy

I. Mondragon, J. Ramos, R. Fernández, 2010 .

Influence of chromophore concentration and network structure on the photo‐orientation properties of crosslinked epoxy‐based azopolymers

I. Mondragon, R. Fernández, P. Oyanguren, 2009 .

Carboxylation treatment of multiwalled carbon nanotubes monitored by infrared and ultraviolet spectroscopies and scanning probe microscopy

A. Salazar, I. Mondragon, S. Goyanes, 2007 .

Cellulose Microfibrils Isolated from Musaceae Fibrous Residues

J. Putaux, I. Mondragon, J. M. Vélez, 2014 .

Stem and bunch banana fibers from cultivation wastes: Effect of treatments on physico‐chemical behavior

I. Mondragon, P. Gañán, A. Arbelaiz, 2004 .

Vinyl ester and unsaturated polyester resins in contact with different chemicals: Dynamic mechanical behavior

I. Mondragon, Á. Valea, María González, 1999 .

Conductive behavior of high TiO2 nanoparticle content of inorganic/organic nanostructured composites.

I. Mondragon, J. Gutierrez, A. Tercjak, 2010, Journal of the American Chemical Society.

The effect of thermal and vapor annealing treatments on the self-assembly of TiO2 /PS-b-PMMA nanocomposites generated via the sol–gel process

I. Mondragon, J. Gutierrez, A. Tercjak, 2009, Nanotechnology.

Hybrid titanium dioxide/PS-b-PEO block copolymer nanocomposites based on sol–gel synthesis

I. Mondragon, L. Peponi, J. Gutierrez, 2008, Nanotechnology.

Self-assembled block copolymers as matrix for multifunctional materials modified with low-molecular-weight liquid crystals

I. Mondragon, A. Tercjak, C. Ocando, 2007 .

Carbon nanotubes as reinforcement of styrene–butadiene rubber

A. Marzocca, I. Mondragon, S. Goyanes, 2007 .

Surfactant addition effects on dispersion and microdomain orientation in SBS triblock copolymer/alumina nanoparticle composites

I. Mondragon, A. Tercjak, C. Ocando, 2011 .

Enhancing water repellence and mechanical properties of gelatin films by tannin addition.

R. Ruseckaite, I. Mondragon, A. Eceiza, 2010, Bioresource technology.

Lignin Separation and Fractionation by Ultrafiltration

I. Mondragon, J. Labidi, Araceli García, 2010, Separation of Functional Molecules in Food by Membrane Technology.

Modification of montmorillonite with cationic surfactants. Thermal and chemical analysis including CEC determination

I. Mondragon, Loli Martin, G. Kortaberria, 2008 .

Agricultural palm oil tree residues as raw material for cellulose, lignin and hemicelluloses production by ethylene glycol pulping process

I. Mondragon, J. Labidi, M. G. Alriols, 2009 .

Effects of hygrothermal ageing on mechanical properties of flax pulps and their polypropylene matrix composites

A. Retegi, I. Mondragon, J. Labidi, 2006 .

Green chemistry for the synthesis of methacrylate-based hydrogels crosslinked through Diels–Alder reaction

A. Retegi, N. Gabilondo, A. Gandini, 2013 .

Nanocomposites Based on Matrices Extracted from Vegetable Oils and Bacterial Cellulose

I. Mondragon, R. Z. Gallego, Aloña Retegi Miner, 2014 .

Sustainable optically transparent composites based on epoxidized soy-bean oil (ESO) matrix and high contents of bacterial cellulose (BC)

P. Stefani, A. Retegi, I. Mondragon, 2012, Cellulose.

Water uptake behavior of layered silicate/starch-polycaprolactone blend nanocomposites

V. Álvarez, I. Mondragon, A. Vázquez, 2008 .

Moisture Absorption Influence on the Mechanical Properties of Carbon/Epoxy Composites

I. Mondragon, Á. Valea, J. Imaz, 1989 .

Blends containing chitosan and poly(sodium-4-styrene sulphonate). Compatibility behavior

I. Mondragon, D. Radić, G. Kortaberria, 2011 .

Ultimate properties of rubber and core-shell modified epoxy matrices with different chain flexibilities

I. Mondragon, S. Goyanes, Á. Valea, 2001 .

Off-axis Flexure Test: A New Method for Obtaining In-plane Shear Properties

I. Mondragon, P. Gañán, F. Mujika, 2005 .

Antioxidant activity of phenolic compounds obtained by autohydrolysis of corn residues

I. Mondragon, J. Labidi, I. Egüés, 2012 .

Cellulose microfibrils from banana rachis: effect of alkaline treatments on structural and morphological features.

J. Putaux, I. Mondragon, P. Gañán, 2009 .

Cellulose microfibrils from banana farming residues: isolation and characterization

J. Putaux, I. Mondragon, P. Gañán, 2007 .

Effects of chemical structure of hardener on curing evolution and on the dynamic mechanical behavior of epoxy resins

P. Guerrero, I. Mondragon, M. Corcuera, 1995 .

Comparative study of lignin fractionation by ultrafiltration and selective precipitation

I. Mondragon, J. Labidi, Araceli García, 2010 .

New Approaches to Cellulose Microfibril Isolation from Musaceae Agro-Industrial Residues

I. Mondragon, P. Gañán, R. Zuluaga, 2009 .

Strain rate and temperature effects on the mechanical behaviour of epoxy mixtures with different crosslink densities

I. Mondragon, R. Llano-Ponte, F. Mujika, 1997 .

Influence of cure schedule and stoichiometry on the dynamic mechanical behaviour of tetrafunctional epoxy resins cured with anhydrides

P. Guerrero, K. Caba, I. Mondragon, 1996 .

Statistical analysis of the mechanical properties of natural fibers and their composite materials. II. Composite materials

J. Kenny, I. Mondragon, L. Peponi, 2008 .

Copolymers Based on Epoxidized Soy Bean Oil and Diglycidyl Ether of Bisphenol A: Relation Between Morphology and Fracture Behavior

P. Stefani, R. Ruseckaite, A. Retegi, 2014 .

Determination of tensile and compressive moduli by flexural tests

I. Mondragon, F. Mujika, A. Arrese, 2006 .

Elucidation of the fibrous structure of Musaceae maturate rachis

A. Retegi, I. Mondragon, P. Gañán, 2008 .

Enhancing the hydrophobic properties of various commercial polymers through mixtures and coatings with a fluorinated diblock copolymer in low concentrations

I. Mondragon, Apostolos Avgeropoulos, G. Kortaberria, 2013 .

Modified Diblock Copolymer Bearing Fluoro Groups and Evaluation of its Hydrophobic Properties

I. Mondragon, Apostolos Avgeropoulos, G. Kortaberria, 2012 .

Mechanical behavior of high impact polystyrene reinforced with short sisal fibers

P. Antich, I. Mondragon, A. Vázquez, 2006 .

Mimosa and chestnut tannin extracts reacted with hexamine in solution

K. Caba, A. Retegi, I. Mondragon, 2009 .

Influence of polyethersulfone modification of a tetrafunctional epoxy matrix on the fracture behavior of composite laminates based on woven carbon fibers

I. Mondragon, E. Díaz, A. Arbelaiz, 2004 .

Cellulose nanocrystals/polyurethane nanocomposites. Study from the viewpoint of microphase separated structure.

L. Rueda, A. Saralegui, I. Mondragon, 2013, Carbohydrate polymers.

In situ polymerization and characterization of elastomeric polyurethane-cellulose nanocrystal nanocomposites. Cell response evaluation

L. Rueda, B. Fernández-d'Arlas, I. Mondragon, 2013, Cellulose.

Isocyanate-rich cellulose nanocrystals and their selective insertion in elastomeric polyurethane

M. Corcuera, L. Rueda, I. Mondragon, 2011 .

Dynamics of single-walled carbon nanotube (SWNT)/polyisoprene (PI) nanocomposites in electric and mechanical fields

I. Mondragon, J. Mijovic, Hyungki Lee, 2007 .

Impedance spectroscopy of reactive polymers. 3. Correlations between dielectric, spectroscopic, and rheological properties during cure of a trifunctional epoxy resin

L. Nicolais, I. Mondragon, J. Mijovic, 1996 .

Separation and Purification of Hemicellulose by Ultrafiltration

I. Mondragon, J. Labidi, I. Egüés, 2012 .

Epoxy - BaTiO3 light-cured composites as organic capacitor

M. Lombardi, I. Mondragon, M. Sangermano, 2013 .

Thermoplastic-modified epoxy resins cured with different functionalities amine mixtures. Kinetics and miscibility study

L. Martín, I. Mondragon, R. Fernández, 2009 .

Toward microphase separation in epoxy systems containing PEO–PPO–PEO block copolymers by controlling cure conditions and molar ratios between blocks

N. Gabilondo, I. Mondragon, A. Eceiza, 2006 .

Mechanistic kinetic model of an epoxy resin cured with a mixture of amines of different functionalities

I. Mondragon, M. Blanco, M. Corcuera, 2005 .

Curing behaviour of syndiotactic polystyrene–epoxy blends: 1. Kinetics of curing and phase separation process

I. Mondragon, V. Carlier, P. Remiro, 2005 .

Reaction‐induced phase separation in epoxy/polysulfone/poly(ether imide) systems. I. Phase diagrams

I. Mondragon, M. Foresti, P. Oyanguren, 2004 .

Curing of epoxy–urethane copolymers in a heated mold: Effect of the curing conditions on the phase-separation process

P. Stefani, I. Mondragon, M. I. Aranguren, 2001 .

Design of morphology in PMMA‐modified epoxy resins by control of curing conditions. I. Phase behavior

I. Mondragon, P. Remiro, M. Corcuera, 1999 .

Polyol production by chemical modification of date seeds

I. Mondragon, J. Labidi, L. Serrano, 2011 .

The growth of carbon nanotubes on large areas of silicon substrate using commercial iron oxide nanoparticles as a catalyst

I. Mondragon, S. Goyanes, G. Rubiolo, 2010 .

Dynamics of in situ synthetized silver-epoxy nanocomposites as studied by dielectric relaxation spectroscopy

I. Mondragon, M. Sangermano, G. Kortaberria, 2011 .

Photopolymerization of Epoxy Coatings Containing Iron‐Oxide Nanoparticles

I. Mondragon, A. Priola, M. Sangermano, 2007 .

Transparent titanium dioxide/block copolymer modified epoxy-based systems in the long scale microphase separation threshold

I. Mondragon, J. Gutierrez, A. Tercjak, 2012 .

Quantitative Nanoelectrical and Nanomechanical Properties of Nanostructured Hybrid Composites by PeakForce Tunneling Atomic Force Microscopy

I. Mondragon, J. Gutierrez, A. Tercjak, 2014 .

IN-PLANE SHEAR PROPERTIES OF MULTISCALE HYBRID F- MWCNTS / LONG CARBON FIBRES / EPOXY LAMINATES

I. Mondragon, F. Mujika, J. A. Ramos, 2012 .

Crystallization of poly(l‐lactid acid) monitored by dielectric relaxation spectroscopy and atomic force microscopy

I. Mondragon, G. Kortaberria, C. Marieta, 2006, Journal of microscopy.

Properties and structure of cyanate ester/polysulfone/organoclay nanocomposites

I. Mondragon, Clara M. Gómez, C. Vallo, 2006 .

Structural and ordering behavior of lamellar polystyrene‐block‐polybutadiene‐block‐polystyrene triblock copolymer containing layered silicates

I. Mondragon, N. Zafeiropoulos, Á. Valea, 2008 .

Statistical analysis of the mechanical properties of natural fibers and their composite materials. I. Natural fibers

J. Kenny, I. Mondragon, L. Peponi, 2008 .

Influence of processing and testing conditions on the mechanical behaviour of sheet-moulding compound laminates

I. Mondragon, I. Etxeberria, I. Mondragón, 1995, Journal of Materials Science.

Functionalization of iron oxide magnetic nanoparticles with poly(methyl methacrylate) brushes via grafting‐from atom transfer radical polymerization

I. Mondragon, A. Eceiza, A. Tercjak, 2007 .

Miscibility and mechanical properties of an amine‐cured epoxy resin blended with poly(ethylene oxide)

I. Mondragon, C. Riccardi, M. Larrañaga, 2007 .

Nanostructuration via Solvent Vapor Exposure of Poly(2-vinyl pyridine-b-methyl methacrylate) Nanocomposites Using Modified Magnetic Nanoparticles

L. Rueda, I. Mondragon, J. Gutierrez, 2008 .

Effect of CdSe nanoparticle addition on nanostructuring of PS-b-P4VP copolymer via solvent vapor exposure.

I. Mondragon, A. Eceiza, G. Kortaberria, 2014, Journal of colloid and interface science.

Cure kinetics of a cobalt catalysed dicyanate ester monomer in air and argon atmospheres from DSC data

I. Mondragon, Clara M. Gómez, I. Recalde, 2004 .

Morphological and optical behavior of thermoset matrix composites varying both polystyrene-block-poly(ethylene oxide) and TiO2 nanoparticle content

I. Mondragon, J. Gutierrez, A. Tercjak, 2011 .

Direct relationships between volume variations at macro and nanoscale in epoxy systems. PALS/PVT measurements

I. Mondragon, S. Goyanes, A. Somoza, 2004 .

Blends of chitosan and poly(sodium-4-styrene sulphonate). Compatibilization by lysine and glutamic acid

I. Mondragon, D. Radić, G. Kortaberria, 2010 .

Local dynamics in epoxy coatings containing iron oxide nanoparticles by dielectric relaxation spectroscopy

I. Mondragon, M. Sangermano, G. Kortaberria, 2008 .

A Comparative Study of Nanocomposites Based on a Recycled Poly(methyl methacrylate) Matrix Containing Several Nanoclays

L. Martinelli, K. Caba, M. Fermeglia, 2008 .

Composites based on acylated cellulose fibers and low-density polyethylene: Effect of the fiber content, degree of substitution and fatty acid chain length on final properties

A. Gandini, I. Mondragon, Loli Martin, 2008 .

Intermolecular interactions on amine-cured epoxy matrices with different crosslink densities. Influence on the hole and specific volumes and the mechanical behavior

I. Mondragon, S. Goyanes, A. Somoza, 2009 .

Silicon and carbon substrates induced arrangement changes in poly(styrene‐b‐isoprene‐b‐styrene) block copolymer thin films

I. Mondragon, J. Ramos, H. Etxeberria, 2012 .

Nanostructuration of self-assembled poly(styrene-b-isoprene-b-styrene) block copolymer thin films in a highly oriented pyrolytic graphite substrate

I. Mondragon, J. Ramos, H. Etxeberria, 2011 .

Mechanical properties–morphology relationships in nano-/microstructured epoxy matrices modified with PEO–PPO–PEO block copolymers

K. Caba, I. Mondragon, A. Tercjak, 2007 .

Generation of nanocomposites based on polystyrene-grafted CdSe nanoparticles by grafting through and block copolymer

I. Mondragon, A. Eceiza, G. Kortaberria, 2013, Colloid and Polymer Science.

Effect of different aqueous synthesis parameters on the size of CdSe nanocrystals

I. Mondragon, G. Kortaberria, A. Larrañaga, 2012, Journal of Materials Science.

Surface modification of sisal fibers: Effects on the mechanical and thermal properties of their epoxy composites

I. Mondragon, P. Gañán, R. Llano-Ponte, 2005 .

Biological natural retting for determining the hierarchical structuration of banana fibers.

I. Mondragon, P. Gañán, J. M. Vélez, 2004, Macromolecular bioscience.

Correlation between nanohole volume and mechanical properties of amine‐cured epoxy resin blended with poly(ethylene oxide)

I. Mondragon, S. Goyanes, A. Somoza, 2009 .

Thermoresponsive inorganic/organic hybrids based on conductive TiO2 nanoparticles embedded in poly(styrene-b-ethylene oxide) block copolymer dispersed liquid crystals

I. Mondragon, L. Peponi, J. Gutierrez, 2009 .

Morphological study and photo-addressing in poly(styrene-b-butadiene-b-styrene) block copolymers with azobenzene groups and polystyrene matrix: Influence of chemical bonding

I. Mondragon, Loli Martin, J. Ramos, 2011 .

Photo-Induced Optical Anisotropy and Morphological Study in Azobenzene Containing Block Copolymers

I. Mondragon, Loli Martin, J. Ramos, 2012 .

Reversible Optical Storage Properties of Nanostructured Epoxy-Based Thermosets Modified with Azobenzene Units

I. Mondragon, A. Tercjak, J. Ramos, 2011 .

Effect of Fiber Treatments on Mechanical Behavior of Short Fique Fiber-reinforced Polyacetal Composites

I. Mondragon, P. Gañán, 2005 .

Thermal and degradation behavior of fique fiber reinforced thermoplastic matrix composites

I. Mondragon, P. Gañán, 2003 .

Kinetics of phenolic resol resin formation by HPLC

I. Mondragon, J. Echeverría, M. Ormaetxea, 1998 .

Influence of PS-b-PEO diblock copolymers on the compatibility of syndiotactic polystyrene modified epoxy blends

I. Mondragon, A. Tercjak, M. Martin, 2006 .

Surface free energy of films of alkali-treated cellulose microfibrils from banana rachis

J. Putaux, I. Mondragon, P. Gañán, 2012 .

Polymer Dispersed Liquid Crystal, Thermotropic and Other Responsive Epoxy Polymers

I. Mondragon, A. Tercjak, 2010 .

Kinetic parameters of a cyanate ester resin catalyzed with different proportions of nonylphenol and cobalt acetylacetonate catalyst

I. Mondragon, I. Recalde, C. Gómez, 2005 .

Confinement of Functionalized Graphene Sheets by Triblock Copolymers

J. Kenny, R. Verdejo, I. Mondragon, 2009 .

Influence of chemical treatments on the interfacial adhesion between sisal fibre and different biodegradable polymers

Alexei Vazquez, I. Mondragon, A. Vázquez, 2007 .

Antimicrobial pullulan derivative prepared by grafting with 3-aminopropyltrimethoxysilane: Characterization and ability to form transparent films

I. Mondragon, C. Freire, P. Sadocco, 2014 .

A systematic investigation on the influence of the chemical treatment of natural fibers on the properties of their polymer matrix composites

J. Kenny, I. Mondragon, D. Puglia, 2004 .

Isoconversional kinetic analysis of resol-clay nanocomposites

N. Gabilondo, I. Mondragon, A. Arbelaiz, 2009 .

Isoconversional kinetic analysis of novolac-type lignophenolic resins cure

I. Mondragon, J. Labidi, G. Kortaberria, 2008 .

Curing kinetics of amine and sodium hydroxide catalyzed phenol-formaldehyde resins

N. Gabilondo, I. Mondragon, J. Ramos, 2007 .

Nanostructured Thermoplastic Elastomers Based on SBS Triblock Copolymer Stiffening with Low Contents of Epoxy System. Morphological Behavior and Mechanical Properties

I. Mondragon, A. Eceiza, A. Tercjak, 2013 .

Comparison of Lattice-Fluid Binary Parameters For Mixtures and Block Copolymers

I. Mondragon, W. Schroeder, C. Riccardi, 2013 .

Surface functionalization of polyolefin films via the ultraviolet‐induced photografting of acrylic acid: Topographical characterization and ability for binding antifungal agents

I. Mondragon, M. Strumia, D. Wunderlin, 2006 .

Microphase Separation in Unsaturated Polyester/ PEO-PPO-PEO Block Copolymer Mixtures Containing Carbon Nanotubes

I. Mondragon, G. Kortaberria, J. Ramos, 2013 .

Molecular dynamics of an epoxy resin modified with an epoxidized poly(styrene-butadiene) linear block copolymer during cure and microphase separation processes

I. Mondragon, A. Tercjak, G. Kortaberria, 2009 .

Cure kinetics of epoxy systems modified with block copolymers

N. Gabilondo, I. Mondragon, G. Kortaberria, 2004 .

Rheokinetic variations during curing of a tetrafunctional epoxy resin modified with two thermoplastics

C. Marieta, Maria Angeles Corcuera, I. Mondragon, 2001 .

Phase separation in polysulfone-modified epoxy mixtures. Relationships between curing conditions, morphology and ultimate behavior

I. Mondragon, A. Eceiza, P. Oyanguren, 2000 .

Fracture toughening of epoxy matrices with blends of resins of different molecular weights and other modifiers

I. Mondragon, P. Remiro, M. Larrañaga, 2004 .

Synthesis and incorporation of dodecanethiol capped silver nanoparticles into poly(styrene-b-isoprene-b-styrene) block copolymer and their influence in the morphology

I. Mondragon, A. Eceiza, J. Ramos, 2013 .

Thermoplastic polyurethanes from renewable resources: effect of soft segment chemical structure and molecular weight on morphology and final properties

L. Rueda, B. Fernández-d'Arlas, I. Mondragon, 2013 .

Synthesis and microstructure–mechanical property relationships of segmented polyurethanes based on a PCL–PTHF–PCL block copolymer as soft segment

Arantxa Eceiza, Agnieszka Tercjak, I. Mondragon, 2009 .

Microdomain composition and properties differences of biodegradable polyurethanes based on MDI and HDI

K. Caba, L. Rueda, I. Mondragon, 2008 .

Structure–property relationships of thermoplastic polyurethane elastomers based on polycarbonate diols

K. Caba, I. Mondragon, A. Eceiza, 2008 .

Molecular Engineering of Elastic and Strong Supertough Polyurethanes

B. Fernández-d'Arlas, I. Mondragon, A. Eceiza, 2012 .

Polymerization of resole resins with several formaldehyde/phenol molar ratios: Amine catalysts against sodium hydroxide catalysts

N. Gabilondo, I. Mondragon, C. Peña, 2006 .

Polymerization of Formaldehyde and Phenol at Different Pressures

N. Gabilondo, I. Mondragon, J. Echeverría, 2002 .

Nanostructured thermosetting epoxy systems modified with poly(isoprene‐b‐methyl metacrylate) diblock copolymer and polyisoprene‐grafted carbon nanotubes

I. Mondragon, G. Kortaberria, J. Ramos, 2013 .

Effect of H12MDI isomer composition on mechanical and physico-chemical properties of polyurethanes based on amorphous and semicrystalline soft segments

M. Corcuera, B. Fernández-d'Arlas, I. Mondragon, 2013, Polymer Bulletin.

Polymerization of an epoxy resin modified with azobenzene groups monitored by near‐infrared spectroscopy

I. Mondragon, R. Fernández, P. Oyanguren, 2009 .

Weathering behaviour of wood-faced construction materials

P. Guerrero, K. Caba, I. Mondragon, 2007 .

Tensile properties of polyarylate‐polycarbonate blends

I. Mondragon, J. Nazábal, 1985 .

Nanostructured unsaturated polyester modified with poly[(ethylene oxide)-b-(propylene oxide)-b-(ethylene oxide)] triblock copolymer

I. Mondragon, A. Tercjak, D. Builes, 2012 .

Microstructure and properties of polyurethanes derived from castor oil

L. Rueda, I. Mondragon, A. Eceiza, 2010 .

The role of reactive silicates on the structure/property relationships and cell response evaluation in polyurethane nanocomposites.

L. Rueda, I. Mondragon, A. Eceiza, 2011, Journal of biomedical materials research. Part A.

Influence of hard segment content and nature on polyurethane/multiwalled carbon nanotube composites

Jonathan N. Coleman, Maria Angeles Corcuera, Arantxa Eceiza, 2011 .

Kinetic and thermodynamic studies of the formation of a polyurethane based on 1,6-hexamethylene diisocyanate and poly(carbonate-co-ester)diol

P. Stefani, K. Caba, L. Rueda, 2007 .

Molecular dynamics of poly(glycolide) and poly(glycolide-co-L-lactide) during isothermal cold crystallization

I. Mondragon, G. Kortaberria, A. Jimeno, 2006 .

Properties of a Vinyl Ester Resin Modified with a Liquid Polymer

I. Mondragon, A. Eceiza, K. de la Caba, 2005 .

Bacterial cellulose produced by a new acid-resistant strain of Gluconacetobacter genus.

Robin Zuluaga, Cristina Castro, J. Putaux, 2012, Carbohydrate polymers.

Generation of core/shell iron oxide magnetic nanoparticles with polystyrene brushes by atom transfer radical polymerization

I. Mondragon, A. Tercjak, M. Stamm, 2007 .

AFM approach toward understanding morphologies in toughened thermosetting matrices

I. Mondragon, I. Harismendy, P. Remiro, 2003 .

Conductive properties of TiO2/bacterial cellulose hybrid fibres.

Aloña Retegi, Junkal Gutierrez, Agnieszka Tercjak, 2012, Journal of colloid and interface science.

Isocyanate curing of novolac-type ligno-phenol–formaldehyde resins

I. Mondragon, J. Labidi, G. Kortaberria, 2008 .

Self-Assembled Nanomaterials Using Magnetic Nanoparticles Modified with Polystyrene Brushes and Poly(styrene-b-butadiene-b-styrene)

L. Rueda, I. Mondragon, A. Tercjak, 2008 .

Relationship between the Morphology of Nanostructured Unsaturated Polyesters Modified with PEO-b-PPO-b-PEO Triblock Copolymer and Their Optical and Mechanical Properties

I. Mondragon, A. Tercjak, D. Builes, 2013 .

Thermoplastic Polyurethane Elastomers Based on Polycarbonate Diols With Different Soft Segment Molecular Weight and Chemical Structure: Mechanical and Thermal Properties

Nagore Gabilondo, Maria Angeles Corcuera, Arantxa Eceiza, 2008 .

Oxypropylation of Rapeseed Cake Residue Generated in the Biodiesel Production Process

I. Mondragon, J. Labidi, M. G. Alriols, 2010 .

Nanohole volume dependence on the cure schedule in epoxy thermosetting networks: A PALS study

I. Mondragon, S. Goyanes, A. Somoza, 2006 .

Nanoindentation study of interphases in epoxy/amine thermosetting systems modified with thermoplastics.

I. Mondragon, J. Ramos, M. Blanco, 2009, Journal of colloid and interface science.

Mechanical behavior of polycarbonate/phenoxy blends before and after interchange reactions

I. Mondragon, J. Nazábal, M. Gaztelumendi, 1988 .

Solid state behaviour and properties of plasticized cellulose acetobutyrate/phenoxy blends

I. Mondragon, J. Nazábal, M. Gaztelumendi, 1987 .

Conductive Properties of Inorganic/Organic Nanostructured Systems Based on Block Copolymers

I. Mondragon, J. Gutierrez, A. Tercjak, 2012 .

Block Copolymer Concentration Gradient and Solvent Effects on Nanostructuring of Thin Epoxy Coatings Modified with Epoxidized Styrene–Butadiene–Styrene Block Copolymers

I. Mondragon, S. Goyanes, Apostolos Avgeropoulos, 2012 .

Micro‐ and macrophase separation of thermosetting systems modified with epoxidized styrene‐block‐butadiene‐ block‐styrene linear triblock copolymers and their influence on final mechanical properties

I. Mondragon, A. Tercjak, J. Ramos, 2008 .

Thermoresponsive meso/nanostructured thermosetting materials based on PS-b-PEO block copolymer-dispersed liquid crystal: Curing behavior and morphological variation

I. Mondragon, A. Tercjak, I. García, 2008 .

Curing Behavior and Final Properties of Nanostructured Thermosetting Systems Modified with Epoxidized Styrene‐Butadiene Linear Diblock Copolymers

D. Mecerreyes, I. Mondragon, M. Stamm, 2007 .

PALS study of epoxy matrices: self‐assembly of block copolymers and its capability for nanostructuring thermosetting systems

I. Mondragon, S. Goyanes, J. Ramos, 2007 .

Nanostructured Thermosetting Systems from Epoxidized Styrene Butadiene Block Copolymers

J. Pomposo, D. Mecerreyes, I. Mondragon, 2005 .

The effect of stoichiometry and thermal history during cure on structure and properties of epoxy networks

Jovan Mijovic, Arantxa Eceiza, I. Mondragon, 1995 .

A comparative study on the influence of epoxy sizings on the mechanical performance of woven carbon fiber-epoxy composites

I. Mondragon, A. Arbelaiz, B. Fernandez, 2004 .

Kinetic and rheological studies of an unsaturated polyester cured with different catalyst amounts

P. Guerrero, K. Caba, I. Mondragon, 1996 .

Influence of migration of plasticizer during melt mixing on the transitions and properties of PC/CAB blends

I. Mondragon, J. Nazábal, M. Gaztelumendi, 1990 .

Exchange reactions on polyarylate-phenoxy blends: their influence on the physical and mechanical behaviour

I. Mondragon, J. Nazábal, P. Remiro, 1987 .

Control of interchange reactions of polycarbonate/polyarylate blends and their influence on physical behavior

I. Mondragon, J. Nazábal, 1986 .

Polycarbonate/phenoxy blends: Physical behavior and development of interchange reactions in melt‐processing conditions

I. Mondragon, J. Nazábal, M. Gaztelumendi, 1986 .

Renewable fibers and bio-based materials for packaging applications - A review of recent developments

Diana Gregor Svetec, David Plackett, Caisa Johansson, 2012 .

Dynamics and morphology in nanostructured thermoset network/block copolymer blends during network formation

I. Mondragon, J. Mijovic, J. Sy, 2000 .

Effects of the cure cycle and thermoplastic content on the final properties of dicyanate ester/polysulfone Semi-IPNS

J. Gavaldà, I. Mondragon, Á. Valea, 2002 .

Exploring Microphase Separation Behavior of Epoxidized Poly(styrene‑b‑isoprene‑b‑styrene) Block Copolymer Inside Thin Epoxy Coatings

I. Mondragon, N. D'Accorso, S. Goyanes, 2013 .

Morphology Development in Thermosetting Mixtures through the Variation on Chemical Functionalization Degree of Poly(styrene-b-butadiene) Diblock Copolymer Modifiers. Thermomechanical Properties

I. Mondragon, A. Tercjak, J. Ramos, 2009 .

Structure and Properties of a Semifluorinated Diblock Copolymer Modified Epoxy Blend

D. Mecerreyes, I. Mondragon, A. Tercjak, 2007 .

Nanostructured Thermosetting Systems by Modification with Epoxidized Styrene-Butadiene Star Block Copolymers. Effect of Epoxidation Degree

J. Pomposo, D. Mecerreyes, I. Mondragon, 2006 .

Synthesis and Characterization of Epoxidized Styrene‐Butadiene Block Copolymers as Templates for Nanostructured Thermosets

J. Pomposo, D. Mecerreyes, I. Mondragon, 2004 .

Effect of poly(ethylene oxide) homopolymer and two different poly(ethylene oxide-b-poly(propylene oxide)-b-poly(ethylene oxide) triblock copolymers on morphological, optical, and mechanical properties of nanostructured unsaturated polyester.

J. Hernandez-Ortiz, I. Mondragon, A. Tercjak, 2014, ACS applied materials & interfaces.

Transparent Nanostructured Thermoset Composites Containing Well-Dispersed TiO2 Nanoparticles

I. Mondragon, J. Gutierrez, A. Tercjak, 2010 .

Towards microphase separation in epoxy systems containing PEO/PPO/PEO block copolymers by controlling cure conditions and molar ratios between blocks. Part 2. Structural characterization

K. Caba, I. Mondragon, P. Remiro, 2006 .

Micro- or nanoseparated phases in thermoset blends of an epoxy resin and PEO-PPO-PEO triblock copolymer

N. Gabilondo, I. Mondragon, G. Kortaberria, 2005 .

Unsaturated Polyester Nanocomposites modified with fibrillated cellulose and PEO-b-PPO-b-PEO block copolymer

I. Mondragon, A. Eceiza, A. Tercjak, 2013 .

Nanostructured systems based on SBS epoxidized triblock copolymers and well-dispersed alumina/epoxy matrix composites

I. Mondragon, A. Tercjak, C. Ocando, 2010 .

Nanostructured thermosets from self-assembled amphiphilic block copolymer/epoxy resin mixtures: effect of copolymer content on nanostructures

I. Mondragon, G. Kortaberria, M. Blanco, 2010 .

Yield and internal stresses in aluminum filled epoxy resin. A compression test and positron annihilation analysis

A. Marzocca, I. Mondragon, S. Goyanes, 2003 .

Liquid crystal alignment in electro-responsive nanostructured thermosetting materials based on block copolymer dispersed liquid crystal

I. Mondragon, A. Tercjak, I. García, 2008, Nanotechnology.

Multifunctional Thermally Reversible Nanostructured Thermosetting Materials Based on Block Copolymers Dispersed Liquid Crystal

I. Mondragon, A. Tercjak, E. Serrano, 2007 .

Thermally reversible nanostructured thermosetting blends modified with poly(ethylene-b-ethylene oxide) diblock copolymer

I. Mondragon, A. Tercjak, M. Martin, 2006 .

Polymer dispersed liquid crystals based on poly(styrene-b-ethylene oxide), poly(bisphenol a carbonate) or poly(methylphenylsiloxane), and 4′-(hexyloxy)-4-biphenyl-carbonitrile: Analysis of phase diagrams and morphologies generated

I. Mondragon, A. Tercjak, M. Larrañaga, 2008 .

Thermally reversible materials based on thermosetting systems modified with polymer dispersed liquid crystals for optoelectronic application

I. Mondragon, A. Tercjak, E. Serrano, 2006 .

Viscoelastic behavior of thermosetting epoxy mixtures modified with syndiotactic polystyrene during network formation

I. Mondragon, A. Tercjak, P. Remiro, 2006 .

Phase separation and rheological behavior during curing of an epoxy resin modified with syndiotactic polystyrene

I. Mondragon, A. Tercjak, P. Remiro, 2005 .

Arrangement of Conductive TiO2 Nanoparticles in Hybrid Inorganic/Organic Thermosetting Materials Using Liquid Crystal

L. Rueda, I. Mondragon, L. Peponi, 2009 .

Relationships between the morphology and thermoresponsive behavior in micro/nanostructured thermosetting matrixes containing a 4'-(hexyloxy)-4-biphenylcarbonitrile liquid crystal.

I. Mondragon, A. Tercjak, 2008, Langmuir : the ACS journal of surfaces and colloids.

In-situ-Synthetized Silver/Epoxy Nanocomposites: Electrical Characterization by Means of Dielectric Spectroscopy

Marco Sangermano, I. Mondragon, M. Sangermano, 2010 .

Rheological and mechanical behaviour of tetraglycidyldiaminodiphenylmethane (TGDDM)/anhydride epoxy systems

I. Mondragon, M. Corcuera, M. A. Andres, 1992 .

Mechanical characterization of woven carbon fiber composites with poly(methyl methacrylate)–modified epoxy matrices

I. Mondragon, B. Fernandez, F. Mujika, 2003 .

Polymer networks derived from the anhydride curing of tetraepoxides

I. Mondragon, Roberto J. J. Williams, C. Riccardi, 1997 .

Kinetic and rheological studies of two unsaturated polyester resins cured at different temperatures

P. Guerrero, K. Caba, I. Mondragon, 1997 .

Characterization of interfacial behaviour in carbon-fibre/cyanate composites

I. Mondragon, E. Schulz, Iñaki Mondragon, 2002 .

Morphological Characterization and Mechanical Behavior of Poly(styrene-co-acrylonitrile)-modified Epoxy Matrices

N. Gabilondo, I. Mondragon, G. Kortaberria, 2004 .

Control of morphologies and mechanical properties of thermoplastic-modified epoxy matrices by addition of a second thermoplastic

I. Mondragon, A. Eceiza, Á. Valea, 2003 .

Morphological variations in PMMA-modified epoxy mixtures by PEO addition

I. Mondragon, L. Berglund, C. Marieta, 2002 .

Dicyanate ester–polyetherimide semi‐interpenetrating polymer networks. II. Effects of morphology on the fracture toughness and mechanical properties

J. Gavaldà, I. Mondragon, I. Harismendy, 2001 .

Morphology and thermal behavior of dicyanate ester‐polyetherimide semi‐IPNS cured at different conditions

J. Gavaldà, I. Mondragon, A. Eceiza, 2000 .

Design of the ultimate behavior of tetrafunctional epoxies modified with polysulfone by controlling microstructure development

I. Mondragon, O. Cortázar, P. Oyanguren, 1999 .

Correlations between rheological and thermal behaviour of TGDDM/m-PDA epoxy systems

M. Cortázar, I. Mondragon, Á. Valea, 1994 .

Mechanical properties of carbon woven reinforced epoxy matrix composites. A study on the influence of matrix modification with polysulfone

I. Mondragon, A. Vázquez, R. Llano-Ponte, 2002 .

Fracture behavior–morphology relationships in an unsaturated polyester resin modified with a liquid oligomer

Pedro Guerrero, K. de la Caba, P. Guerrero, 1999 .

The effect of temperature on the curing of unsaturated polyester resins modified with a liquid polymer

P. Guerrero, K. Caba, I. Mondragon, 1997 .

Chemorheology and ultimate behavior of epoxy‐amine mixtures modified with a liquid oligomer

I. Mondragon, M. Corcuera, C. Riccardi, 2000 .

Thermoplastic‐modified epoxy resins cured with different functionalities amine mixtures: Morphology, thermal behavior, and mechanical properties

I. Mondragon, G. Kortaberria, J. Ramos, 2009 .

Volume changes at macro- and nano-scale in epoxy resins studied by PALS and PVT experimental techniques

I. Mondragon, S. Goyanes, A. Somoza, 2007 .

Influence of phenoxy addition on the curing kinetics for uncatalyzed and catalyzed cyanate ester resin

K. Caba, I. Mondragon, P. Remiro, 2010 .

The physical state of polycarbonate/hytrel blends

I. Mondragon, J. Nazábal, M. Gaztelumendi, 1988 .

Bacterial cellulose films with controlled microstructure–mechanical property relationships

A. Retegi, N. Gabilondo, I. Mondragon, 2010 .

Optical storage in azobenzene-containing epoxy polymers processed as Langmuir Blodgett films.

R. C. Sanfelice, O. N. Oliveira, I. Mondragon, 2013, Materials science & engineering. C, Materials for biological applications.

Bioinspired antimicrobial and biocompatible bacterial cellulose membranes obtained by surface functionalization with aminoalkyl groups.

I. Mondragon, A. Eceiza, C. Freire, 2013, ACS applied materials & interfaces.

Synthesis and characterization of epoxy polymers containing azobenzene groups that exhibit optical birefringence

I. Mondragon, R. Fernández, P. Oyanguren, 2008 .

Nanostructured physical gel of SBS block copolymer and Ag/DT/SBS nanocomposites

J. Kenny, I. Mondragon, L. Peponi, 2009, Journal of Materials Science.

Crystallization behavior of PEO in blends of poly(ethylene oxide)/poly(2-vinyl pyridine)-b-(ethylene oxide) block copolymer

I. Mondragon, D. Radić, Á. Leiva, 2012 .

Comparative study by DSC and FTIR techniques of an unsaturated polyester resin cured at different temperatures

P. Guerrero, K. Caba, J. Kenny, 1998 .

Characterization of soybean protein concentrate—stearic acid/palmitic acid blend edible films

P. Stefani, R. Ruseckaite, K. Caba, 2012 .

Effect of alkaline and autohydrolysis processes on the purity of obtained hemicelluloses from corn stalks.

I. Mondragon, J. Labidi, I. Egüés, 2012, Bioresource technology.

Flax fiber surface modifications : Effects on fiber physico mechanical and flax/polypropylene interface properties

Jose Maria Kenny, J. Kenny, I. Mondragon, 2005 .

NANOSTRUCTURED UNSATURATED POLYESTER USING BLOCK COPOLYMERS: MORPHOLOGY, OPTICAL PROPERTIES AND FRACTURE TOUGHNESS RELATIONSHIP

J. Hernandez-Ortiz, I. Mondragon, A. Tercjak, 2014 .

Mechanical Behavior of Wood/Polypropylene Composites: Effects of Fibre Treatments and Ageing Processes

I. Mondragon, A. Arbelaiz, Á. Valea, 2003 .

Biodegradability of Banana and Plantain Cellulose Microfibrils Films in Anaerobic Conditions

A. Retegi, I. Mondragon, P. Gañán, 2012, Journal of Polymers and the Environment.

Influence of cure conditions on properties of resol/layered silicate nanocomposites

I. Mondragon, Marta López, M. Blanco, 2012 .

Processing conditions analysis of Eucalyptus globulus plywood bonded with resol-tannin adhesives.

J. C. Piter, P. Stefani, R. Ruseckaite, 2008, Bioresource technology.

Influence of the temperature on the formation of a phenolic resol resin catalyzed with amine

I. Mondragon, J. Echeverría, C. Riccardi, 2002 .

Influence of the initial formaldehyde to phenol molar ratio (F/P) on the formation of a phenolic resol resin catalyzed with amine

I. Mondragon, J. Echeverría, M. Martin, 2000 .

Kinetics of phenolic resol resin formation by HPLC. 2. Barium hydroxide

I. Mondragon, J. Echeverría, M. Martin, 1998 .

Kinetics of phenolic resol resin formation by HPLC. III: Zinc acetate

I. Mondragon, J. Echeverría, G. Astarloa-Aierbe, 1999 .

Modelling of phenolic resin polymerisation

I. Mondragon, J. Echeverría, C. Riccardi, 2002 .

Testing the effect of processing and surface treatment on the interfacial adhesion of single fibres in natural fibre composites

I. Mondragon, A. Arbelaiz, 2011 .

Effects of amine molecular structure on carbon nanotubes functionalization.

I. Mondragon, A. Eceiza, S. Goyanes, 2009, Journal of Nanoscience and Nanotechnology.

INFLUENCE OF COMPATIBILIZATION TREATMENTS ON THE MECHANICAL PROPERTIES OF FIQUE FIBER REINFORCED POLYPROPYLENE COMPOSITES

I. Mondragon, P. Gañán, 2004 .

Surfactant assisted selective confinement of carbon nanotubes functionalized with octadecylamine in a poly(styrene-b-isoprene-b-styrene) block copolymer matrix

J. Kenny, I. Mondragon, L. Peponi, 2009 .

Morphological analysis of self-assembled SIS block copolymer matrices containing silver nanoparticles

J. Kenny, I. Mondragon, L. Peponi, 2008 .

Thermal treatment of the carbon nanotubes and their functionalization with styrene

I. Mondragon, S. Goyanes, M. Corcuera, 2009 .

Controlled placement of polystyrene-grafted CdSe nanoparticles in self-assembled block copolymers

I. Mondragon, G. Kortaberria, H. Etxeberria, 2013, Colloid and Polymer Science.

Lignins for Phenol Replacement in Novolac-Type Phenolic Formulations, Part I: Lignophenolic Resins Synthesis and Characterization

I. Mondragon, J. Labidi, G. Kortaberria, 2007 .

Influence of cure schedule and solvent exposure on the dynamic mechanical behavior of a vinyl ester resin containing glass fibers

I. Mondragon, A. Eceiza, Á. Valea, 1998 .

The Effect of Surface Modification of Silica Microfillers in an Epoxy Matrix on the Thermo-mechanical Properties

J. González‐Benito, J. Baselga, I. Mondragon, 2008 .

Property tailoring of phenol-formaldehyde matrices by control of reactant molar ratio and thermoplastic modification

A. Retegi, N. Gabilondo, I. Mondragon, 2011 .

Stable Solutions of Multiwalled Carbon Nanotubes Using an Azobenzene Dye

S. Ledesma, I. Mondragon, S. Goyanes, 2010 .

Fique fiber-reinforced polyester composites: Effects of fiber surface treatments on mechanical behavior

I. Mondragon, P. Gañán, 2004 .

Mechanical properties of natural fibers/polyamides composites

A. Retegi, J. Kenny, I. Mondragon, 2009 .

Shape Memory Polyurethanes Based on Polyols Derived From Renewable Resources

B. Fernández-d'Arlas, I. Mondragon, A. Eceiza, 2012 .

Influence of the amount of catalyst and initial pH on the phenolic resol resin formation

I. Mondragon, J. Echeverría, A. Vázquez, 2000 .

Curing characteristics of resol-layered silicate nanocomposites

N. Gabilondo, I. Mondragon, A. Arbelaiz, 2008 .

Synthesis and characterization of resol-layered silicate nanocomposites

N. Gabilondo, I. Mondragon, J. Ramos, 2007 .

Poly(urea)urethanes based on amorphous quaternizable hard segments and a crystalline polyol derived from castor oil

B. Fernández-d'Arlas, I. Mondragon, A. Eceiza, 2013, Colloid and Polymer Science.

Curing of phenolic resins modified with chestnut tannin extract

I. Mondragon, J. Labidi, A. Tejado, 2006 .

Renewable fibers and bio-based materials for packaging applications – A review of recent developments

I. Mondragon, J. Bras, D. Plackett, 2012, BioResources.

Plantain fibre bundles isolated from Colombian agro-industrial residues.

I. Mondragon, J. Labidi, P. Gañán, 2008, Bioresource technology.

Hydrothemal environment influence on water diffusion and mechanical behaviour of carbon fibre/epoxy laminates

I. Mondragon, J. Imaz, A. Rubio, 1991 .

Surfactant-aided dispersion of polystyrene-functionalized carbon nanotubes in a nanostructured poly(styrene-b-isoprene-b-styrene) block copolymer

I. Mondragon, N. D'Accorso, S. Goyanes, 2011 .

Evaluation of fiber surface treatment and toughening of thermoset matrix on the interfacial behaviour of carbon fiber-reinforced cyanate matrix composites

N. Gabilondo, I. Mondragon, L. Irusta, 2005 .

Effect of the cure temperature on the morphology of a cyanate ester resin modified with a thermoplastic: characterization by atomic force microscopy

I. Mondragon, I. Harismendy, C. Marieta, 2000 .

Viscoelastic behaviour of epoxy resins modified with poly(methyl methacrylate)

I. Mondragon, Á. Valea, M. Martin, 1998 .

Accelerator adsorption onto carbon nanotubes surface affects the vulcanization process of styrene–butadiene rubber composites

Arantxa Eceiza, Angel J. Marzocca, Silvia Goyanes, 2009 .

Phase separation induced by a chain polymerization: Polysulfone-modified epoxy/anhydride systems

I. Mondragon, P. Oyanguren, Roberto J. J. Williams, 1998 .

Influence of curing conditions on the morphologies of a PMMA-modified epoxy matrix

I. Mondragon, P. Remiro, C. Marieta, 2001 .

Lignins for Phenol Replacement in Novolac-Type Phenolic Formulations. II. Flexural and Compressive Mechanical Properties

I. Mondragon, J. Labidi, G. Kortaberria, 2008 .

Morphology-properties relationship on nanocomposite films based on poly(styrene-block-diene-block-styrene) copolymers and silver nanoparticles

J. Kenny, I. Mondragon, L. Peponi, 2011 .

Synthesis and characterization of phenolic novolacs modified by chestnut and mimosa tannin extracts

N. Gabilondo, I. Mondragon, A. Tejado, 2006 .

Multifunctional hybrid nanopapers based on bacterial cellulose and sol–gel synthesized titanium/vanadium oxide nanoparticles

I. Mondragon, J. Gutierrez, A. Tercjak, 2013, Cellulose.

In Situ Synthetized Silver/Epoxy Nanocomposites: Electrical Characterization in Terms of Dielectric Relaxation Spectroscopy

I. Mondragon, M. Sangermano, G. Kortaberria, 2012 .

Dependence of dynamic mechanical behavior of DGEBA/DDM stoichiometric epoxy systems on the conditions of curing process

I. Mondragon, J. Garmendia, G. Sanz, 1995 .

On the Displacement Field for Unidirectional Off-Axis Composites in 3-point Flexure - Part II: Numerical and Experimental Results

I. Mondragon, F. Mujika, A. De Benito, 2003 .

Influence of filler alignment in the mechanical and electrical properties of carbon nanotubes/epoxy nanocomposites

I. Mondragon, S. Goyanes, G. Rubiolo, 2012 .

Dielectric monitoring of curing of liquid oligomer‐modified epoxy matrices

P. Arruti, I. Mondragon, G. Kortaberria, 2001 .

Molecular dynamics of poly(glycolide-co-l-lactide) copolymer during isothermal cold crystallization

I. Mondragon, G. Kortaberria, A. Arbelaiz, 2007 .

Molecular Dynamics of PGA Bioabsorbable Polymer During Isothermal Cold Crystallization

K. Caba, I. Mondragon, A. Eceiza, 2006 .

Fracture toughness of epoxy resins modified with polyethersulfone: Influence of stoichiometry on the morphology of the mixtures

I. Mondragon, A. Eceiza, Á. Valea, 1998 .

Curing of an epoxy resin modified with poly(methylmethacrylate) monitored by simultaneous dielectric/near infrared spectroscopies

Nagore Gabilondo, P. Arruti, N. Gabilondo, 2004 .

Dynamical properties of epoxy composites filled with quartz powder

I. Mondragon, S. Goyanes, Jorge D. Marconi, 2000 .

Influence of molecular weight and chemical structure of soft segment in reaction kinetics of polycarbonate diols with 4,4′-diphenylmethane diisocyanate

K. Caba, N. Gabilondo, I. Mondragon, 2005 .

Bonding and molecular environment effects on photoorientation in epoxy-based polymers having azobenzene units

I. Mondragon, R. Fernández, M. Galante, 2009 .

The influence of molecular weight and chemical structure of soft segment in reaction kinetics with tolyl isocyanate

K. Caba, I. Mondragon, A. Eceiza, 2001 .

Reaction kinetics of tolyl isocyanate with polyhexamethylene-pentamethylene carbonate diol

J. Pascault, I. Mondragon, A. Eceiza, 1999 .

NEW AMINE FUNCTIONAL IONIC LIQUID AS BUILDING BLOCK IN NANOTECHNOLOGY

J. Pomposo, R. Marcilla, D. Mecerreyes, 2007 .

Miscibility and kinetic behaviour of cyanate resin/polysulfone blends

I. Mondragon, I. Recalde, A. Campos, 2001 .

Mapping of carbon nanotubes in the polystyrene domains of a polystyrene-b-polyisoprene-b-polystyrene block copolymer matrix using electrostatic force microscopy

M. Cardinali, J. Kenny, I. Mondragon, 2010 .

Rheological characterization of tetraglycidyl 4,4′-diaminodiphenylmethane/m-phenylene diamine systems

I. Mondragon, N. Markaide, M. Corcuera, 1992 .

Study of the mechanical, electrical and morphological properties of PU/MWCNT composites obtained by two different processing routes

J. Coleman, U. Khan, L. Rueda, 2012 .

Chemical and morphological characterization of sulfonated polystyrene brushes in different environments

I. Mondragon, A. Eceiza, J. Ramos, 2013 .

Cure kinetics and shrinkage model for epoxy-amine systems

I. Mondragon, S. Goyanes, J. Ramos, 2005 .

Effect of different thermal treatments on the self-assembled nanostructures of a styrene–butadiene–styrene star block copolymer

I. Mondragon, P. Remiro, M. Larrañaga, 2004 .

Controlled epoxidation of poly(styrene‐b‐isoprene‐b‐styrene) block copolymer for the development of nanostructured epoxy thermosets

I. Mondragon, S. Goyanes, H. Garate, 2011 .

Blends of epoxy resin with amine-terminated polyoxypropylene elastomer : Morphology and properties

C. Bucknall, I. Mondragon, M. Franco, 1999 .

Curing of an epoxy resin modified with nanoclay monitored by dielectric spectroscopy and rheological measurements

P. Arruti, I. Mondragon, G. Kortaberria, 2006 .

In situ real-time monitoring of a diglycidyl ether of bisphenol A epoxy resin modified with poly(etherimide)/polysulphone blends by Simultaneous dielectric/near-infrared spectroscopy

P. Arruti, I. Mondragon, G. Kortaberria, 2003 .

Electrostatic force microscopy measurements of CdSe-PS nanoparticles and CdSe-PS/poly(styrene-b-butadiene-b-styrene) nanocomposites

I. Mondragon, A. Eceiza, A. Tercjak, 2013, Colloid and Polymer Science.

Self-Assembling of SBS Block Copolymers as Templates for Conductive Silver Nanocomposites

J. Kenny, I. Mondragon, L. Peponi, 2008 .

Nanostructured Thermoset Composites Containing Conductive TiO2 Nanoparticles

I. Mondragon, J. Gutierrez, A. Tercjak, 2012 .

Dynamic and mechanical properties of epoxy networks obtained with PPO based amines/mPDA mixed curing agents

I. Mondragon, R. Llano-Ponte, F. D. Nograro, 1996 .

Self‐Assembling Nanomaterials using Magnetic Nanoparticles Modified with Polystyrene Brushes

I. Mondragon, A. Tercjak, M. Stamm, 2007 .

Cellulose Nanocrystals and Au Nanoparticles Well-Dispersed in a Poly(styrene-b-ethylene oxide) Block Copolymer Matrix

I. Mondragon, J. Gutierrez, A. Tercjak, 2011 .

Conductive photoswitchable vanadium oxide nanopaper based on bacterial cellulose.

I. Mondragon, J. Gutierrez, A. Tercjak, 2012, ChemSusChem.

Conductive Properties of Photoluminescent Au/Ps-b-PEO Inorganic/Organic Hybrids Containing Nematic Liquid Crystals

I. Mondragon, J. Gutierrez, A. Tercjak, 2011 .

Kinetic and thermodynamic studies of the formation of a polyurethane based on 1,6-hexamethylene diisocyanate and poly(carbonate-co-ester)diol

P. Stefani, K. Caba, L. Rueda, 2007 .

Relationship between the network morphology and properties of commercial vinyl ester resins

I. Mondragon, A. Vázquez, E. Rodríguez, 2006 .

Viscoelastic and Mechanical Properties of Epoxy/Mixed Amine Systems. Influence of Stoichiometry and Cure Conditions

I. Mondragon, R. Llano-Ponte, A. Rubio, 1996, Engineering Plastics.