V. Demir

发表

Mathematical modelling of convection drying of green table olives

V. Demir, Tuncay Günhan, A. Yağcioğlu, 2007 .

Mathematical Modelling and the Determination of Some Quality Parameters of Air-dried Bay Leaves

V. Demir, Tuncay Günhan, A. Yağcioğlu, 2004 .

Mathematical modelling of drying of bay leaves

Arif Hepbasli, Vedat Demir, Ebru Hancioglu, 2005 .

Mathematical Modelling of Convection Drying Characteristics of Artichoke (Cynara scolymus L.) Leaves

V. Demir, Tuncay Günhan, A. Yağcioğlu, 2014 .

Effective Moisture Diffusivity Estimation from Drying Data

V. Demir, Tuncay Günhan, A. Yağcioğlu, 2007 .

Determination of the Hydraulic Properties of a Flat Type Drip Emitter using Computational Fluid Dynamics

V. Demir, Tuncay Günhan, A. Yazgi, 2020, Tarım Bilimleri Dergisi.

Determination of the head losses in metal body disc filters used in drip irrigation systems

V. Demir, A. Değirmencioğlu, A. Yazgi, 2009 .

Processing of vacuum heat-treated MgO-densified silicon nitride crucible for molten cast iron handling

A. Demir, V. Demir, 2012 .

Adapted support to combine classical implements of seedbed preparation and seeding: comparative study in sub-humid area in Tunisia.

Ü. Evci̇m, Hamdi Bilgen, A. Deği̇rmenci̇oğlu, 2002 .

Historical Perspective: Ottomans and the Republican Era

V. Demir, 2015 .

Evaluation of the Suitability of Some Local Materials as Cooling Pads

Tuncay Günhan, Vedat Demir, A. K. Yagcioglu, 2007 .

Vacuum Heat Treatment of MgO -Densified Pressureless Sintered Silicon Nitride Ceramics

V. Demir, D. Thompson, V. Demir, 2007 .

Vacuum heat-treatment of MgO-densified silicon nitride ceramics and their compatibility with molten aluminium and copper

A. Demir, V. Demir, 2011 .

Vacuum heat treatment of LiAlO2 densified silicon nitride ceramics

V. Demir, D. Thompson, 2006 .

Wear Behaviour of A356/TiAl3 in Situ Composites Produced by Mechanical Alloying

V. Demir, D. Özyürek, S. Çam, 2016 .

Wear Behaviour of A 356 / TiAl 3 in Situ Composites Produced by Mechanical Alloying

V. Demir, D. Özyürek, S. Çam, 2016 .

Pressureless sintering of Si3N4 ceramics with oxide additives in different packing powder

V. Demir, D. Thompson, 2005 .

Comparison of computational fluid dynamics-based simulations and visualized seed trajectories in different seed tubes

V. Demir, A. Değirmencioğlu, A. Yazgi, 2020 .

Milking routine analysis on farms with milking parlours.

V. Demir, A. Değirmencioğlu, W. Wolter, 2002 .

Development of a simplified model for predicting the optimum lengths of drip irrigation laterals with coextruded cylindrical in-line emitters

Vedat Demir, Hüseyin Yürdem, Aysegul Mancuhan, 2015 .

Development of a mathematical model to predict clean water head losses in hydrocyclone filters in drip irrigation systems using dimensional analysis

Vedat Demir, Hüseyin Yürdem, Adnan Degirmencioglu, 2010 .

Development of a mathematical model to predict head losses from disc filters in drip irrigation systems using dimensional analysis

Vedat Demir, Hüseyin Yürdem, Adnan Degirmencioglu, 2008 .

Experimental exergetic performance evaluation of a novel solar assisted LiCl–H2O absorption cooling system

Arif Hepbasli, Orhan Ekren, Tuncay Günhan, 2014 .

Heating/Cooling Block System Design with Thermoelectric Module

V. Demir, A. Kavsaoğlu, Havva Sungur, 2020, Medical Technologies National Conference.