A. Gavrus

发表

Minimization of Friction Influence on the Evaluation of Rheological Parameters From Compression Test: Application to a Forging Steel Behavior Identification

S. Diot, D. Guines, A. Gavrus, 2009 .

Elaboration and Mechanical-Electrochemical Characterisation of Open Cell Antimonial-lead Foams Made by the “Excess Salt Replication Method” for Eventual Applications in Lead-acid Batteries Manufacturing

A. Gavrus, Amel Hind Hassein-Bey, A. Belhadj, 2020 .

An inverse analysis using a finite element model for identification of rheological parameters

J. Chenot, A. Gavrus, E. Massoni, 1996 .

The rheological parameter identification formulated as an inverse finite element problem

J. Chenot, A. Gavrus, E. Massoni, 1999 .

A rheological analysis of solid polymers using an inverse method applied to a finite element model of the torsion and tensile tests

A. Gavrus, 2010 .

Formulation of a representative plastic strain and representative plastic strain rate by using a conical indentation on a rigid visco-plastic material

A. Gavrus, X. Hernot, G. Mauvoisin, 2015 .

An experimental and numerical analysis of the heat transfer problem in SHPB at elevated temperatures

A. Gavrus, E. Ragneau, B. Davoodi, 2005 .

A technique for measuring the dynamic behaviour of materials at elevated temperatures with a compressive SHPB

A. Gavrus, E. Ragneau, B. Davoodi, 2005 .

An optimal forward extrusion device proposed for numerical and experimental analysis of materials tribological properties corresponding to bulk forming processes

H. Francillette, A. Gavrus, D. Pham, 2012 .

Analysis of the Anisotropic Behavior and of the Formability Aptitude for an AA2024 Alloy Using the Channel Die Compression Test and the Simple Tension Test

H. Francillette, A. Gavrus, Shunyi Zhang, 2012 .

Two-step procedure for identification of metal behavior from dynamic compression tests

S. Diot, D. Guines, A. Gavrus, 2007 .

EXPERIMENTAL AND FINITE ELEMENT ANALYSIS OF ERICHSEN TEST. APPLICATION TO IDENTIFICATION OF SHEET METALLIC MATERIAL BEHAVIOUR

A. Gavrus, V. Oleksik, O. Bologa, 2010 .

Experimental and numerical analysis concerning the behaviour of OL50 steel grade specimens coated with polyurea layer under dynamics loadings

D. Guines, A. Gavrus, A. Rotariu, 2015 .

Evaluation of creep rheological parameters: Indentation versus compressive test

A. Gavrus, X. Hernot, G. Mauvoisin, 2015 .

Numerical simulation and experimental investigation on the residual stresses in a laser beam welded dual phase DP600 steel plate: Thermo-mechanical material plasticity model

A. Gavrus, Shibo Liu, A. Kouadri-Henni, 2017 .

Finite element method coupled with a numerical cellular automaton model to simulate the residual stress of dual phase DP600 steel Nd:YAG laser welding

A. Gavrus, Shibo Liu, A. Kouadri-Henni, 2017 .

Modeling grain orientation of DP600 steel by Nd:YAG laser

A. Gavrus, Shibo Liu, A. Kouadri-Henni, 2016 .

An Anisotropic Behaviour Analysis of AA2024 Aluminium Alloy Undergoing Large Plastic Deformations

H. Francillette, A. Gavrus, 2011 .

A constitutive law for the mechanical behavior of Zr 702α

Adinel Gavrus, Ricardo A. Lebensohn, H. Francillette, 2003 .

The Matching of Experimental Polymer Processing Flows to Viscoelastic Numerical Simulation

O. H. Nouatin, J. Agassant, F. Baaijens, 2002 .

New Phenomenological Material Constitutive Models for the Description of the Ti6Al4V Titanium Alloy Behavior Under Static and Dynamic Loadings

Adinel Gavrus, Mariem Yaich, A. Gavrus, 2020, Procedia Manufacturing.

The analysis of inelastic behaviour formulated as an inverse rheological approach

J. Chenot, A. Gavrus, E. Massoni, 1998 .

Numerical and Experimental Study of Fatigue Strength-Mechanical Stress/Strain Estimations of Thin DP600 Sheets Assembly Using Laser Welding

A. Gavrus, A. Kouadri-Henni, 2019 .

Numerical modeling of integrally stiffened structures forming from creep age forming technique

A. Gavrus, D. Guines, D. Guines, 2008 .

EXPERIMENTAL DESIGN , MODELLING AND NUMERICAL CALIBRATION OF A HIGH SPEED SHPB MECHATRONIC SYSTEM USING A PNEUMATIC PROPULSION DEVICE

A. Gavrus, S. Guégan, F. Marco, 2017 .

Mechanical behavior analysis of metallic materials using a Finite Element modeling of the SHPB test, a numerical calibration of the bar’s elastic strains and an inverse analysis method

A. Gavrus, A. Rotariu, S. Cananau, 2015 .

An Inverse Analysis Method Applied to Optimization of Specimen’s Shape for Performing Hot Rapid Crushing Tests from Homogeneous Initial Temperature Field

A. Gavrus, 2022, MATEC Web of Conferences.

A study of material constitutive behaviour at elevated temperature from compressive SHPB test using an inverse analysis method

Adinel Gavrus, Eric Ragneau, Behnam Davoodi, 2006 .

Analysis of the dynamic SHPB test using the finite element simulation

A. Gavrus, E. Ragneau, B. Davoodi, 2003 .

DP600 dual phase steel thermo-elasto-plastic constitutive model considering strain rate and temperature influence on FEM residual stress analysis of laser welding

A. Gavrus, S. Liu, A. Gavrus, 2018, Journal of Manufacturing Processes.

Mechanical and Numerical Analysis Concerning Compressive Properties of Tin-Lead Open-Cell Foams

A. Gavrus, A. Belhadj, F. Bernard, 2015, Journal of Materials Engineering and Performance.