I. Hong

发表

Preparation of waste cooking oil based biodiesel using microwave irradiation energy

H. -. Kim, I. Hong, Hyeong-Ju Jeon, 2016 .

Prediction of biodiesel fuel properties from fatty acid alkyl ester

I. Hong, Seung Bum Lee, Gil Song Jeon, 2014 .

Water Purification Properties of Porous Zeolite Concrete

M. Choi, I. Hong, Nack Kook Sung, 2011 .

Effects of HLB value on oil-in-water emulsions: Droplet size, rheological behavior, zeta-potential, and creaming index

I. Hong, Seung Bum Lee, S. Kim, 2018, Journal of Industrial and Engineering Chemistry.

Evaluation of Emulsion Stability for Cosmetic Facial Cream Emulsion Using Mixed Nonionic Emulsifier

I. Hong, Seung Bum Lee, Junho Choi, 2016 .

Design of MMA-Type Thermosetting Road Markings to Improve Reflectivity

I. Hong, Seung Bum Lee, Chang-Geun Lee, 2015 .

Embedment Properties of Reflective Beads for Thermoplastic Road Markings

I. Hong, Seung Bum Lee, Chang-Geun Lee, 2015 .

Phytoestrogen Extraction for Relaxation of Female Menopause Symptoms from Natural Products

I. Hong, Seung Bum Lee, So Yeon Park, 2016 .

Optimization of Extraction Process for Antioxidant from Persimmon Leaf and Thistle Using Response Surface Methodology

장현식, I. Hong, Seung Bum Lee, 2017 .

Extraction of Active Ingredient from Angelica Using Microwave Energy

I. Hong, Seung Bum Lee, Gil Song Jeon, 2016 .

Extraction of Flavonoid Components from Persimmon Leaf, Thistle and New Green

I. Hong, Seung Bum Lee, Gil Song Jeon, 2016 .

Effect of supercritical carbon dioxide as an exfoliation aid on bio-based polyethylene terephthalate glycol-modified/clay nanocomposites

Jae Wook Lee, I. Hong, Sangmook Lee, 2013, Korea-Australia Rheology Journal.

Effect of ultrasound irradiation on solvent extraction process

H. -. Kim, I. Hong, Min-Hwan Chi, 2009 .

Characterization of extraction and separation of rice bran oil rich in EFA using SFE process

I. Hong, Hyung-Jin Kim, Seung-Bum Lee, 1999 .

Fuel properties of canola oil and lard biodiesel blends: Higher heating value, oxidative stability, and kinematic viscosity

I. Hong, Seung Bum Lee, Jae Ryong Lee, 2015 .

Synthesis of high-surface-area ruthenium oxide aerogels by non-alkoxide sol–gel route

D. Suh, I. Hong, T. Park, 2003 .

Modification of Linear Polyphenylene Sulfide with Functional Elastomers and Its Properties

I. Hong, Sangmook Lee, Sungki Kim, 2013 .

Properties of ultrasound-assisted blends of poly(ethylene terephthalate) with polycarbonate

I. Hong, Sangmook Lee, 2013 .

Optimization of barrel plating process for electroless Ni–P plating

H. -. Kim, I. Hong, Seung Bum Lee, 2014 .

Prediction of solubility parameter from intrinsic viscosity

I. Hong, Seung Bum Lee, Gil Song Jeon, 2013 .

Barrel plating process specification for undercoating with copper cyanate

I. Hong, Seung Bum Lee, K. H. Han, 2012 .

Selection of thinner for epoxy type resins for neon transformer housing

I. Hong, Seung-Bum Lee, Y. Yoon, 2012 .

Thermal Durability of Neon Transformer with Diluent Mixing Ratio

I. Hong, Seung Bum Lee, Gil Song Jeon, 2015 .

Diluent filler particle size effect for thermal stability of epoxy type resin

I. Hong, Seung Bum Lee, H. Lee, 2012 .

Thermal deformation of epoxy type resin for neon transformer housing

I. Hong, Seung-Bum Lee, 2011 .

Estimation of Rheological Properties of Highly Concentrated Polymer Bonded Explosive Simulant by Microstructure Analysis

Jae Wook Lee, I. Hong, Sangmook Lee, 2014 .

Photocatalytic degradation of methanol on titania and titania–silica aerogels prepared by non-alkoxide sol–gel route

D. Suh, I. Hong, T. Park, 2007 .

Extraction of natural dye from Gardenia and chromaticity analysis according to chi parameter

I. Hong, Hyeong-Ju Jeon, Seung Bum Lee, 2015 .

Comparison of solubility parameters for alkane family obtained using cubic equation of state

I. Hong, Kifa Kim, Kyung-Ai Park, 2011 .

Measurements and correlation of effect of cosolvents on the solubilities of complex molecules in supercritical carbon dioxide

I. Hong, K. Yoo, M. J. Noh, 1995 .

Cooling domain prediction of HFCs and HCFCs refrigerant with Joule-Thomson coefficient

I. Hong, Kyung-Ai Park, K. H. Han, 2012 .

Solubility prediction of bioantioxidants for functional solvent by group contribution method

I. Hong, H. Lee, Kyung-Ai Park, 2010 .

Textural properties and water-holding capacity of broiler breast meat cooked to various internal endpoint temperatures

I. Hong, Youngseung Lee, 2012, Food Science and Biotechnology.

Cure kinetics and modeling the reaction of silicone rubber

I. Hong, Sangmook Lee, 2013 .

Effect of Compatibilizer Types on the Properties of Linear PPS/PET Blends

I. Hong, Sangmook Lee, Sungki Kim, 2013 .

Compatibilization of Linear PPS/PET Blends with SEBS Copolymers

I. Hong, Sangmook Lee, Sungki Kim, 2013 .

Electrical conductivity enhancement of polycarbonate/poly(styrene-co-acrylonitril)/carbon nanotube composites by high intensity ultrasound

Jae Wook Lee, I. Hong, Sangmook Lee, 2014, Macromolecular Research.

Rheological Characteristics of Highly Concentrated Polymer Bonded Explosive Simulant: Wall Slip, Thixotropy, and Flow Instability

Jae Wook Lee, I. Hong, Sangmook Lee, 2014 .

Microcellular foaming of silicone rubber with supercritical carbon dioxide

I. Hong, Sangmook Lee, 2013, Korean Journal of Chemical Engineering.

Optimization of fish-oil-based biodiesel synthesis

I. Hong, Seung Bum Lee, J. Park, 2013 .

Polyurethane curing kinetics for polymer bonded explosives: HTPB/IPDI binder

Jae Wook Lee, I. Hong, Sangmook Lee, 2015, Korean Journal of Chemical Engineering.

Curing behavior of polyurethane as a binder for polymer-bonded explosives

Jae Wook Lee, I. Hong, Sangmook Lee, 2015 .

Catalytic Oxidation Kinetics of Vapor Phase BTX over Pt/γ-Al 2 O 3

I. Hong, Seung Bum Lee, Sungah Kang, 1999 .

Optimum process and energy density analysis of canola oil biodiesel synthesis

I. Hong, Seung Bum Lee, Kyong Ho Han, 2010 .

Effects of humidity and temperature on a proton exchange membrane fuel cell (PEMFC) stack

Sunhoe Kim, I. Hong, Sunhoe Kim, 2008 .

Modeling of soybean oil bed extraction with supercritical carbon dioxide

I. Hong, S. Rho, K. Yoo, 1990 .

Membrane performance comparison in a proton exchange membrane fuel cell (PEMFC) stack

I. Hong, Sunhoe Kim, 2010 .

Comparison of red, brown and green seaweeds on enzymatic saccharification process

I. Hong, Hyeong-Ju Jeon, Seung Bum Lee, 2014 .

Ultrasonic energy effect on vegetable oil based biodiesel synthetic process

I. Hong, Seung Bum Lee, Jae-Dong Lee, 2011 .

Phase Behavior of Sick House Syndrome(SHS) Chemicals

I. Hong, Seung Bum Lee, Myunggyu Shin, 2011 .

Equilibrium Partitioning of Nutrient Components in Functional Solvents

I. Hong, H. Lee, 2009 .

Alcoholysis of canola oil using a short-chain (C1–C3) alcohols

H. -. Kim, I. Hong, Seung Bum Lee, 2014 .