V. Pisarev

发表

General approach to residual stresses determination in thin-walled structures by combining the hole drilling method and reflection hologram interferometry

V. S. Pisarev, M. M. Bondarenko, V. Pisarev, 2005 .

Reflection hologram interferometry combined with hole drilling technique as an effective tool for residual stresses fields investigation in thin-walled structures

V. S. Pisarev, M. M. Bondarenko, V. Pisarev, 2001 .

Determination of displacement of hole profile in cylindrical shells subjected to torsion using holographic interferometry

V. Pisarev, V. V. Balalov, V. V. Yakovlev, 1988 .

Evolution of Fracture Mechanics Parameters near a Hole under Low-Cycle Fatigue According to Crack Simulation by Narrow Notches

V. Pisarev, A. Chernov, S. Eleonsky, 2021, Inorganic Materials.

Effect of Low-Cycle Fatigue on Fracture Mechanics Parameters According to Speckle Interferometry

V. Pisarev, I. Odintsev, S. Eleonsky, 2017, Inorganic Materials.

Evolution of the fracture mechanics parameters in the vicinity of the hole in conditions of low-cycle fatigue according to the data of modeling a crack with narrow notches

V. Pisarev, S. Eleonsky, Y. Matvienko, 2020 .

The effect of low-cycle fatigue parameters on damage accumulation near a hole

V. Pisarev, S. Eleonsky, Y. Matvienko, 2019 .

Combining the crack compliance method and speckle interferometry data for determination of stress intensity factors and T-stresses

V. Pisarev, I. Odintsev, S. Eleonsky, 2017 .

Determination of fracture mechanics parameters on a base of local displacement measurements

V. Pisarev, S. Eleonsky, Y. Matvienko, 2013 .

Fracture mechanics parameters of narrow notches by experimental local displacement measurements

V. Pisarev, I. Odintsev, Y. Matvienko, 2013 .

Residual stress determination by optical interferometric measurements of hole diameter increments

V. Pisarev, I. Odintsev, S. Eleonsky, 2018, Optics and Lasers in Engineering.

The effect of low-cycle fatigue on evolution of fracture mechanics parameters in residual stress field caused by cold hole expansion

V. Pisarev, S. Eleonsky, Y. Matvienko, 2018, Frattura ed Integrità Strutturale.

Evolution of fracture mechanics parameters relevant to narrow notch increment as a measure of fatigue damage accumulation

V. Pisarev, S. Eleonsky, Y. Matvienko, 2021 .

Low-cycle fatigue damage accumulation near the cold-expanded hole by crack compliance data

V. Pisarev, S. Eleonsky, Y. Matvienko, 2021, International Journal of Fatigue.

FIB-DIC Residual Stress Evaluation in Shot Peened VT6 Alloy Validated by X-ray Diffraction and Laser Speckle Interferometry

V. Pisarev, S. Eleonsky, A. Salimon, 2022, Nanomaterials.

Determination of stresses on the contour of holes in plane structural elements by the method of speckle photography in white light

V. Pisarev, S. Novikov, A. Fursov, 1987 .

Residual stresses near cold-expanded hole at different stages of high-cycle fatigue by crack compliance data

V. Pisarev, Sviatoslav Eleonsky, M. Zajtsev, 2021, Frattura ed Integrità Strutturale.

Influence of stress ratio on residual stress evolution near cold-expanded hole due to low-cycle fatigue by crack compliance data

V. Pisarev, A. Chernov, Sviatoslav Eleonsky, 2020, Frattura ed Integrità Strutturale.

Residual Stress Determination in Orthotropic Composites by Displacement Measurements Near Through Hole

V. Pisarev, A. Chernov, S. Eleonsky, 2015, Experimental Mechanics.

Determination of Membrane and Bending Residual Stress Components in Thin-Walled Plane Structures Proceeding from Two-Side Initial Data

V. Pisarev, M. Bondarenko, I. Odintsev, 2005 .

Damage Accumulation near a Hole under Low-Cycle Fatigue Based on Measuring Local Strain Response

V. Pisarev, A. Chernov, S. Eleonsky, 2021, Inorganic Materials.

Residual Stress Determination in Orthotropic Composites by Displacement Measurements Near Through Hole

V. Pisarev, S. Eleonsky, A. Chernov, 2015 .

A role of fringe pattern catalogue in the course of interferometrically based determination of residual stresses by the hole-drilling method

V. Pisarev, V. Balalov, 2004 .

Combined implementing the hole-drilling method and reflection hologram interferometry for residual stresses determination in cylindrical shells and tubes

V. Pisarev, V. Balalov, V. G. Moshensky, 2007 .

Damage accumulation near a hole under low cycle fatigue proceeding from measurements of local deformation response

V. Pisarev, S. Eleonsky, Y. Matvienko, 2020, Industrial laboratory. Diagnostics of materials.

Determination of fracture mechanics parameters by measurements of local displacements due to crack length increment: DETERMINATION OF FRACTURE MECHANICS PARAMETERS

V. Pisarev, Y. Matvienko, A. Chernov, 2014 .

Strain and Stress Analysis by Holographic and Speckle Interferometry

Valery P. Shchepinov, Vladimir S. Pisarev, V. Pisarev, 1996 .

Application of reflection hologram interferometry with a high resolution to residual stresses characterisation by local material removing

Vladimir Pisarev, Vitaly V. Balalov, V. Pisarev, 2007, SPIE Optical Metrology.

Comparative Residual Stress Evaluation in SLM 3D-printed Al-Si-Mg alloy (RS-300) Using the Contour Method, Hole Drilling Laser Speckle Interferometry, X-ray Diffraction and Xe pFIB-DIC Micro-ring-core Milling

V. Pisarev, A. Salimon, P. Somov, 2021 .

Comparative Multi-Modal, Multi-Scale Residual Stress Evaluation in SLM 3D-Printed Al-Si-Mg Alloy (RS-300) Parts

V. Pisarev, A. Salimon, P. Somov, 2021, Metals.

Residual Stresses Determination near FSW Joints by Combining the Hole Drilling Method and Reflection Hologram Interferometry

V. Pisarev, A. Chernov, I. Odintsev, 2021, Materials Science Forum.

Residual stress/strain evolution due to low‐cycle fatigue by removing local material volume and optical interferometric data

V. Pisarev, A. Chernov, S. Eleonsky, 2019, Fatigue & Fracture of Engineering Materials & Structures.

Damage accumulation near the cold-expanded hole due to high-cycle fatigue by crack compliance method

V. Pisarev, Y. Matvienko, Sviatoslav Eleonsky, 2021, Frattura ed Integrità Strutturale.