S. Kato

发表

Empirical Equation for Natural Convection Heat Transfer in Various Gas Pressure Fields

N. Maruyama, H. Ono, S. Nishida, 2008 .

Visualization of Temperature Distribution and Clarification of Heat and Mass Transfer Mechanism in a Single Cell of PEFC

M. Hirota, S. Kato, M. Takeuchi, 2009 .

Longitudinal flow characteristics of vertically falling liquid films without concurrent gas flow

S. Kato, H. Takahama, 1980 .

Investigation on Temperature Distribution Measured by Thermography and Simulation on Heat and Mass Transport Phenomena in a Single Cell of Polymer Electrolyte Fuel Cell

M. Hirota, S. Kato, M. Takeuchi, 2008 .

Performance characteristics of energy separation in a steam-operated vortex tube

S. Kato, H. Yokosawa, H. Kawamura, 1979 .

Ultrasonic computerized tomography (CT) for temperature measurements with limited projection data based on extrapolated filtered back projection (FBP) method

Seizo Kato, Ning Zhu, S. Kato, 2004 .

Visualization of 3D Temperature Distribution with an Acoustic Tomography.

N. Maruyama, S. Kato, Ning Zhu, 1996 .

LCA Evaluation for Grid Electricity Power Plants in Thailand Using LCA-NETS Method

T. Mungcharoen, N. Maruyama, S. Kato, 2002 .

Quantum chemical analysis and visualization of plasma assisted direct mass conversions from methane into methanol

S. Kato, Yoshihiro Yamamoto, T. Hara, 2001 .

Influence of Preparation Conditions of Coated TiO_2 Film on CO_2 Reforming Performance

S. Kato, A. Nishimura, S. Kato, 2007 .

Three-Dimensional Temperature Measurement by Laser-Holographic Interferometry : Numerical Simulation of Light Deflection and Its Quantitative Compensation for Measurement Error

N. Maruyama, S. Kato, 1994 .

Holographic interferometric measurements of the three-dimensional temperature field with thermally developing flow in the measuring-beam direction

N. Maruyama, S. Kato, 1989 .

A further application of holographic interferometry to three-dimensional temperature field measurements. An interferogram analysis and its experimental evidence of thermally developing flow in the objective beam direction.

N. Maruyama, S. Kato, 1988 .

Life cycle considerations of the flue gas desulphurization system at a lignite-fired power plant in Thailand

Anugerah Widiyanto, Tanongkiat Kiatsiriroat, Sate Sampattagul, 2004 .

Development of Decision Model for Selection of Appropriate Power Generation System Using Distance Based Approach Method

Anugerah Widiyanto, Naoki Maruyama, Seizo Kato, 2004 .

Optimizing Selection of Appropriate Power Generation Systems in Indonesia By Using Distance Based Approach Method

Anugerah Widiyanto, Naoki Maruyama, Seizo Kato, 2004 .

Hydrogen gas-turbine characteristics and hydrogen energy system schemes

Seizo Kato, N. Nomura, S. Kato, 1997 .

Comparison of Coal-fired and Natural Gas-fired Power Plants as Economically Viable and Ecologically Sustainable Power Generation Systems

Akira Nishimura, Tanongkiat Kiatsiriroat, Naoki Maruyama, 2005 .

Environmental Impact of Fossil Fuel Fired Co-Generation Plants Using a Numerically Standardized LCA Scheme

Anugerah Widiyanto, Naoki Maruyama, Seizo Kato, 2003 .

Numerical simulation and laser holographic study on thermal diffusion in counterflow with different temperatures

N. Maruyama, S. Kato, S. Tabejamaat, 1997 .

Study on Synthesizing BDF by Using Ultrasonic Sonochemistry Effect

Nobutaka Ito, Ning Zhu, Takashi Tsuchiya, 2005 .

In-situ Measurement of In-plane Temperature Distribution in a Polymer Electrolyte Fuel Cell by Thermography and Clarification of the Factors Causing the In-plane Temperature Distribution

M. Hirota, S. Kato, M. Takeuchi, 2009 .

Heat Transfer Characteristics of Natural Convection in Low-density Environment Flow visualization and temperature measurement by laser interferometry

N. Maruyama, S. Nishida, S. Kato, 2007 .

An automatic temperature measurement by holographic inferferometry with compensation for the error due to light deflection

N. Maruyama, S. Kato, 1991, Proceedings IECON '91: 1991 International Conference on Industrial Electronics, Control and Instrumentation.

Mass-flow reduction of rarefied gas by roughness of a slit surface (High-speed calculation of DSMC method on the vector processor).

Masaru Usami, Tetsuo Fujimoto, Seizo Kato, 1988 .