J. Feugeas

发表

Evaluation of residual deformations generated by a pulsed ion implanter using interferometric phase measurement

G. H. Kaufmann, G. E. Galizzi, S. Brühl, 1995 .

( 1 0 1 ¯ 1 $ \begin{array}{ccc}1& 0& \begin{array}{cc}\bar{1}& 1\end{array}\end{array}$ ) preferential orientation of polycrystalline AlN grown on SiO2/Si wafers by reactive sputter magnetron technique

A. Craievich, J. Feugeas, E. Bemporad, 2016 .

Modeling of very thin aluminum nitride film mechanical properties from nanoindentation measurements

J. Feugeas, D. Chicot, A. Iost, 2015 .

Depth profiling and morphological characterization of AlN thin films deposited on Si substrates using a reactive sputter magnetron

J. Feugeas, R. Brusa, S. Mariazzi, 2014 .

Reactive sputter magnetron reactor for preparation of thin films and simultaneous in situ structural study by X-ray diffraction.

A. Craievich, J. Feugeas, R. Neuenschwander, 2013, The Review of scientific instruments.

AlN thin films deposited by DC reactive magnetron sputtering: effect of oxygen on film growth

Eric Gautron, B. Abdallah, E. Gautron, 2013 .

The time variations of N2 active species in pulsed N2-H2 dc discharges

S. Brühl, J. Feugeas, A. Ricard, 1999 .

Ion nitrided AISI H13 tool steel Part I – Microstructural aspects

M. Staia, J. Feugeas, B. Gomez, 2006 .

The thermal evolution of targets under plasma focus pulsed ion implantation

J. Feugeas, G. Sanchez, 1997 .

Generation of residual deformations by pulsed ion implantation

G. H. Kaufmann, A. Cardona, S. Brühl, 1995 .

Thermal effect of ion implantation with ultra-short ion beams

J. Feugeas, G. Sanchez, G. Grigioni, 1995 .

Nitrogen implantation of AISI 304 stainless steel with a coaxial plasma gun

J. Feugeas, E. Llonch, C. O. D. González, 1988 .

Behavior of nitrided and carburized AISI 904 L stainless steels under severe light ion beam irradiation with plasma focus

M. Milanese, J. Feugeas, E. Bemporad, 2015 .

Corrosion behavior of ion nitrided AISI 316L stainless steel

J. Feugeas, S. Farina, B. Gomez, 2008 .

Hydrogen permeation modification of 4140 steel by ion nitriding with pulsed plasmas

S. Brühl, J. Feugeas, B. Gomez, 1998 .

Austenite modification of AISI 316L SS by pulsed nitrogen ion beams generated in dense plasma focus discharges

J. Feugeas, J. Lesage, J. Ferrón, 2010 .

Titanium Surface Hardening by Pulsed Nitrogen Ion Implantation

J. Feugeas, G. Sanchez, G. Grigioni, 1992 .

Stability of expanded austenite, generated by ion carburizing and ion nitriding of AISI 316L SS, under high temperature and high energy pulsed ion beam irradiation

M. Milanese, J. Feugeas, E. Bemporad, 2013 .

Ion nitriding of stainless steels. Real time surface characterization by synchrotron X-ray diffraction

Aldo F. Craievich, A. Craievich, J. Feugeas, 2002 .

Stability under temperature of expanded austenite developed on stainless steel AISI 316L by ion nitriding

J. Feugeas, B. Gomez, L. Nosei, 2004 .

Time evolution of Cr and N on AISI 304 steel surface during pulsed plasma ion nitriding

A. Craievich, J. Feugeas, G. Sanchez, 2003 .

Characterization of expanded austenite developed on AISI 316L stainless steel by plasma carburization

J. Feugeas, D. Chicot, J. Lesage, 2010 .

Behavior of the pulsed ion nitrided AISI 4140 steel/CVD TiN coatings as tribological pair

M. Staia, S. Brühl, J. Feugeas, 2000 .

Crystallization of amorphous zirconium thin film using ion implantation by a plasma focus of 1 kJ

J. Feugeas, O. Sanctis, B. Gomez, 2007 .

X-ray diffraction characterization of ion-implanted austenitic stainless steel

J. Lebrun, M. Marqués, J. Feugeas, 2005 .

In situ synchrotron radiation diffraction study of low carbon steel during ion nitriding

A. Craievich, J. Feugeas, G. Kellermann, 1999 .

Prediction of hardness–depth profile from indentations at surface of materials

J. Feugeas, D. Chicot, J. Lesage, 2009 .

Steel surface treatment by a dual process of ion nitriding and thermal shock

J. Feugeas, B. Gomez, L. Nachez, 2003 .

Pulsed-plasma-nitrided API 5L X-65 steel: hydrogen permeability and microstructural aspects

S. Brühl, J. Feugeas, A. Bott, 1998 .

A study by emission spectroscopy of the active species in pulsed DC discharges

Sonia P. Brühl, S. Brühl, J. Feugeas, 1997 .

Pulsed ion implantation of nitrogen in pure titanium

J. Feugeas, G. Sanchez, J. Hermida, 1994 .

The influence of the insulator surface in the plasma focus behavior

J. Feugeas, 1989 .

Current distribution during the breakdown in a coaxial electrode system

J. Feugeas, O. V. Pamel, 1989 .

Power voltage source synchronized with a spectrometer for real-time spectroscopic studies of pulsed discharges

Jorge N. Feugeas, Aldo Marenzana, Sonia P. Brühl, 1998, IEEE Trans. Instrum. Meas..

Changes in the elasticity modulus and mechanical dynamical spectroscopy of nitrogen and argon implanted copper

J. Feugeas, G. Sanchez, O. A. Lambri, 1995 .

Wear Behaviour of Steel and Titanium Treated by Pulsed IoN Implantation

J. Feugeas, G. Sanchez, G. Grigioni, 1998 .

Tribological properties of pulsed ion nitrided AISI 4140 steel

M. Staia, S. Brühl, J. Feugeas, 1999 .

Synchrotron Radiation Applied to Real-Time Studies of the Kinetics of Growth of Aluminum Nitride Thin Multilayers.

A. Craievich, J. Feugeas, R. Neuenschwander, 2019, The journal of physical chemistry. B.

Ion nitriding of zirconia coated on stainless steel: structure and mechanical properties

F. Sánchez-Bajo, R. Caruso, J. Feugeas, 2004 .

Mechanical Spectroscopy in Nitrogen Implanted Copper

J. Feugeas, G. Sanchez, E. D. Bulejes, 1996 .

Chamber for in situ WAXS, SAXS and GISAXS studies: application to plasma induced transformations in steels

A. Craievich, J. Feugeas, R. Neuenschwander, 2001 .