T. Gross

发表

D. Watt, T. Gross, R. S. Raber, 1992 .

Crack formation during laser cutting of silicon

D. Watt, T. Gross, S. Hening, 1991 .

Fracture surface interference in shear—I. A model based on experimental surface characterizations

T. Gross, Y. Zhang, D. Mendelsohn, 1995 .

Identification of process-induced residual stresses in 3D woven carbon/epoxy composites by combination of FEA and blind hole drilling

T. Gross, I. Tsukrov, Kostiantyn Vasylevskyi, 2020 .

Curing cycle modification for RTM6 to reduce hydrostatic residual tensile stress in 3D woven composites

H. Bayraktar, T. Gross, I. Tsukrov, 2016 .

Scanning probe microscopy generated out-of-plane deformation maps exhibiting heterogeneous nanoscale deformation resulting from thermal cycling of Cu-polyimide damascene interconnects

T. Gross, I. Tsukrov, N. Kamsah, 2001 .

Comparison of stress-based failure criteria for prediction of curing induced damage in 3D woven composites

T. Gross, I. Tsukrov, A. Drach, 2018 .

On the effect of crack face contact and friction due to fracture surface roughness in edge cracks subjected to external shear

T. Gross, D. Mendelsohn, 1988 .

Impact of I-V behavior and estimated temperature rise on surface and tip modification of the nanocontact between a highly doped silicon scanning probe microscope tip and gold surface under ambient conditions

T. Gross, Anjali Parkhi, 2011 .

Detection of nanoscale etch and ash damage to nanoporous methyl silsesquioxane using electrostatic force microscopy

T. Gross, Shaoning Yao, S. Satyanarayana, 2008 .

Analysis of Fiber Optic Sensor to Measure Velocities During High Deformation Rate Material Forming Processes

B. Kinsey, T. Gross, E. Thibaudeau, 2015 .

PREDICTING CURE-INDUCED MICROCRACKING IN 3 D WOVEN COMPOSITES WITH REALISTIC SIMULATION TECHNOLOGY

H. Bayraktar, T. Gross, I. Tsukrov, 2012 .

Development of Realistic Simulation Techniques to Predict Cure-Induced Microcracking in 3D Woven Composites

H. Bayraktar, T. Gross, I. Tsukrov, 2011 .

Measuring Failure Stress of RTM6 Epoxy Resin under Purely Hydrostatic Tensile Stress using Constrained Tube Method

H. Bayraktar, T. Gross, I. Tsukrov, 2016, Experimental Techniques.

Finite Element Predictions of the Effect of Diffusion-Accommodated Interfacial Sliding on Thermal Stresses in Cu/Polymer Dielectric and Cu/Oxide Dielectric Single Level Damascene Interconnect Structures

T. Gross, I. Tsukrov, N. Kamsah, 2002 .

Interfacial sliding in Cu/Ta/polyimide high density interconnects as a result of thermal cycling

L. P. Buchwalter, T. Gross, D. Zhmurkin, 1997 .

Finite Element Modeling of Diffusional Creep with Explicit Consideration of Enhanced Vacancy Diffusivity in a Finite Region Adjacent to the Grain Interface

T. Gross, I. Tsukrov, Vasyl M Grychanyuk, 2008 .

On the ability of nanoindentation to measure anisotropic elastic constants of pyrolytic carbon

R. Piat, T. Gross, B. Reznik, 2013 .

Evaluation of Process-Induced Residual Stresses in Orthogonal 3D Woven Composites via Nonlinear Finite Element Modeling Validated by Hole Drilling Experiments

T. Gross, I. Tsukrov, Kostiantyn Vasylevskyi, 2022, Composite Structures.

HUMID AIR EFFECTS ON CRACK TIP PLASTIC WORK IN 1008 STEEL

T. Gross, A. D. Joseph, 1986 .

Unique nanoindentation damage for highly textured pyrolytic carbon

T. Gross, B. Reznik, I. Tsukrov, 2013 .

ON THE ABILITY OF SHARP INDENTERS TO MEASURE ELASTIC ANISOTROPY IN PYROLYTIC CARBON

T. Gross, I. Tsukrov, N. Timoshchuk, 2011 .

Constitutive Law for Calculating Plastic Deformations During CZ Silicon Crystal Growth

O. Dillon, T. Gross, R. J. Angelis, 1990 .

Dynamic strain aging in Czochralski-grown silicon single crystals

K. Okazaki, T. Gross, R. J. Angelis, 1989 .

High temperature (900 – 1300°C) mechanical behaviour of dendritic web grown silicon ribbons: - strain rate and temperature dependence of the yield stress

T. Gross, V. K. Mathews, 1987 .

Micromechanisms of Monotonic and Cyclic Crack Growth

T. Gross, S. Lampman, 1996 .

Corrosion Rates and Changes in Mechanical Properties of Copper Alloys due to Seawater Exposure

T. Gross, I. Tsukrov, A. Drach, 2012 .

Martensite Formation in Conventional and Isothermal Tension of 304 Austenitic Stainless Steel Measured by X-ray Diffraction

Y. Korkolis, T. Gross, Newell Moser, 2014, Metallurgical and Materials Transactions A.

FRICTIONAL EFFECTS ON FATIGUE CRACK GROWTH IN β -ANNEALED Ti-6Al-4V

T. Gross, S. Bose, L. Zhong, 1988 .

Comparison of techniques for the measurement of plastic work of fatigue crack growth in low carbon steel

T. Gross, A. D. Joseph, 1985 .

Calorimetric Measurement of the Plastic Vtork of Fatigue Crack Propagation in 4140 Steel

T. Gross, J. Weertman, 1982 .

Tensile properties of Czochralski grown silicon from 900–1200°C

T. Gross, V. K. Mathews, 1986 .

Effective stiffness and thermal expansion coefficients of unidirectional composites with fibers surrounded by cylindrically orthotropic matrix layers

T. Gross, I. Tsukrov, B. Drach, 2012 .

Two-dimensional, electrostatic finite element study of tip-substrate interactions in electric force microscopy of high density interconnect structures.

Y Wu, T S Gross, T. Gross, 2001, Ultramicroscopy.

Analysis Of Diffusional Stress Relaxation InSubmicron Cu Interconnect Structures UsingThe Model With Enhanced Vacancy DiffusivityIn Grain Boundary Region

T. Gross, I. Tsukrov, W. M. Grich, 2006 .

Numerical Modeling of Grain Boundary Effects in the Diffusional Creep of Copper Interconnect Lines

T. Gross, I. Tsukrov, Vasyl M Grychanyuk, 2004 .

INFLUENCE OF ANISOTROPY OF PYROLYTIC CARBON ON EFFECTIVE PROPERTIES OF CARBON / CARBON COMPOSITES

T. Gross, I. Tsukrov, B. Drach, 2009 .

Numerical modeling of carbon/carbon composites with nanotextured matrix and 3D pores of irregular shapes

R. Piat, T. Böhlke, T. Gross, 2011 .

The influence of composition on the properties of pH-swellable polymers for chemical sensors

Li Zhang, W. Rudolf Seitz, W. Seitz, 1997 .

Evidence of fracture surface interference for cracks loaded in shear detected by phase-shifted speckle interferometry

T. Gross, D. Mendelsohn, R. Goulet, 1996 .

Mode I stress intensity factors induced by fracture surface roughness under pure mode III loading: Application to the effect of loading modes on stress corrosion crack growth

T. Gross, D. Mendelsohn, 1989 .

Frictional effects in mode III fatigue crack propagation

T. Gross, 1985 .

Finite Element Modeling to Predict Cure-Induced Microcracking in Three-Dimensional Woven Composites

Igor Tsukrov, Lars Martinsson, Jon Goering, 2011 .

Geometry and load fixture effects in the four-point-bend mixed mode fracture specimen

T. Gross, D. Mendelsohn, Lih-jier Young, 2001 .

Experimental–computational estimation of rough fracture surface contact stresses

T. Gross, D. Mendelsohn, R. Goulet, 1998 .

AN ANALYSIS OF FRICTIONAL EFFECTS ON CYLINDRICAL MODE III FATIGUE CRACK PROPAGATION SPECIMENS

T. Gross, D. Mendelsohn, 1988 .

Fiber Reinforced Plastic Grids for the Structural Reinforcement of Concrete

Edwin R. Schmeckpeper, Charles H. Goodspeed, Joseph Robert Yost, 1990 .

Homogenization of the elastic properties of pyrolytic carbon based on an image processing technique

T. Böhlke, T. Langhoff, T. Gross, 2013 .

Fracture surface interference in shear—II. Experimental measurements of crack tip displacement field under mode II loading in 7075-T6 Al

D. Watt, T. Gross, Y. Zhang, 1995 .

Thermomechanical deformation of 1 μm thick Cu-polyimide line arrays studied by scanning probe microscopy

L. P. Buchwalter, F. Kaufman, T. Gross, 1996 .